summaryrefslogtreecommitdiffstats
path: root/kernel
AgeCommit message (Collapse)Author
2007-11-28softlockup: fix false positives on CONFIG_NOHZThomas Gleixner
David Miller reported soft lockup false-positives that trigger on NOHZ due to CPUs idling for more than 10 seconds. The solution is touch the softlockup watchdog when we return from idle. (by definition we are not 'locked up' when we were idle) http://bugzilla.kernel.org/show_bug.cgi?id=9409 Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/net-2.6: (41 commits) [XFRM]: Fix leak of expired xfrm_states [ATM]: [he] initialize lock and tasklet earlier [IPV4]: Remove bogus ifdef mess in arp_process [SKBUFF]: Free old skb properly in skb_morph [IPV4]: Fix memory leak in inet_hashtables.h when NUMA is on [IPSEC]: Temporarily remove locks around copying of non-atomic fields [TCP] MTUprobe: Cleanup send queue check (no need to loop) [TCP]: MTUprobe: receiver window & data available checks fixed [MAINTAINERS]: tlan list is subscribers-only [SUNRPC]: Remove SPIN_LOCK_UNLOCKED [SUNRPC]: Make xprtsock.c:xs_setup_{udp,tcp}() static [PFKEY]: Sending an SADB_GET responds with an SADB_GET [IRDA]: Compilation for CONFIG_INET=n case [IPVS]: Fix compiler warning about unused register_ip_vs_protocol [ARP]: Fix arp reply when sender ip 0 [IPV6] TCPMD5: Fix deleting key operation. [IPV6] TCPMD5: Check return value of tcp_alloc_md5sig_pool(). [IPV4] TCPMD5: Use memmove() instead of memcpy() because we have overlaps. [IPV4] TCPMD5: Omit redundant NULL check for kfree() argument. ieee80211: Stop net_ratelimit/IEEE80211_DEBUG_DROP log pollution ...
2007-11-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-schedLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched: sched: bump version of kernel/sched_debug.c sched: fix minimum granularity tunings sched: fix RLIMIT_CPU comment sched: fix kernel/acct.c comment sched: fix prev_stime calculation sched: don't forget to unlock uids_mutex on error paths
2007-11-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: x86: fix APIC related bootup crash on Athlon XP CPUs time: add ADJ_OFFSET_SS_READ x86: export the symbol empty_zero_page on the 32-bit x86 architecture x86: fix kprobes_64.c inlining borkage pci: use pci=bfsort for HP DL385 G2, DL585 G2 x86: correctly set UTS_MACHINE for "make ARCH=x86" lockdep: annotate do_debug() trap handler x86: turn off iommu merge by default x86: fix ACPI compile for LOCAL_APIC=n x86: printk kernel version in WARN_ON and other dump_stack users ACPI: Set max_cstate to 1 for early Opterons. x86: fix NMI watchdog & 'stopped time' problem
2007-11-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: virtio: fix net driver loop case where we fail to restart module: fix and elaborate comments virtio: fix module/device unloading lguest: Fix uninitialized members in example launcher
2007-11-26sched: bump version of kernel/sched_debug.cIngo Molnar
bump version of kernel/sched_debug.c and remove CFS version information from it. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-26sched: fix minimum granularity tuningsZou Nan hai
increase the default minimum granularity some more - this gives us more performance in aim7 benchmarks. also correct some comments: we scale with ilog(ncpus) + 1. Signed-off-by: Zou Nan hai <nanhai.zou@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-26sched: fix kernel/acct.c commentIngo Molnar
fix kernel/acct.c comment. noticed by Lin Tan. Comment suggested by Olaf Kirch. also see: http://bugzilla.kernel.org/show_bug.cgi?id=8220 Reported-by: tammy000@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-26sched: don't forget to unlock uids_mutex on error pathsPavel Emelyanov
The commit commit 5cb350baf580017da38199625b7365b1763d7180 Author: Dhaval Giani <dhaval@linux.vnet.ibm.com> Date: Mon Oct 15 17:00:14 2007 +0200 sched: group scheduling, sysfs tunables introduced the uids_mutex and the helpers to lock/unlock it. Unfortunately, the error paths of alloc_uid() were not patched to unlock it. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Dhaval Giani <dhaval@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-26time: add ADJ_OFFSET_SS_READJohn Stultz
Michael Kerrisk reported that a long standing bug in the adjtimex() system call causes glibc's adjtime(3) function to deliver the wrong results if 'delta' is NULL. add the ADJ_OFFSET_SS_READ API detail, which will be used by glibc to fix this API compatibility bug. Also see: http://bugzilla.kernel.org/show_bug.cgi?id=6761 [ mingo@elte.hu: added patch description and made it backwards compatible ] NOTE: the new flag is defined 0xa001 so that it returns -EINVAL on older kernels - this way glibc can use it safely. Suggested by Ulrich Drepper. Acked-by: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-11-20[S390] appldata: remove unused binary sysctls.Heiko Carstens
Remove binary sysctls that never worked due to missing strategy functions. Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Gerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-11-20[S390] cmm: remove unused binary sysctls.Heiko Carstens
Remove binary sysctls that never worked due to missing strategy functions. Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-11-19[IPVS]: Move remaining sysctl handlers over to CTL_UNNUMBEREDSimon Horman
Switch the remaining IPVS sysctl entries over to to use CTL_UNNUMBERED, I stronly doubt that anyone is using the sys_sysctl interface to these variables. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-19[IPVS]: Fix sysctl warnings about missing strategy in schedulersSimon Horman
sysctl table check failed: /net/ipv4/vs/lblc_expiration .3.5.21.19 Missing strategy [...] sysctl table check failed: /net/ipv4/vs/lblcr_expiration .3.5.21.20 Missing strategy Switch these entried over to use CTL_UNNUMBERED as clearly the sys_syscal portion wasn't working. This is along the same lines as Christian Borntraeger's patch that fixes up entries with no stratergy in net/ipv4/ipvs/ip_vs_ctl.c Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-19[IPVS]: Fix sysctl warnings about missing strategyChristian Borntraeger
Running the latest git code I get the following messages during boot: sysctl table check failed: /net/ipv4/vs/drop_entry .3.5.21.4 Missing strategy [...] sysctl table check failed: /net/ipv4/vs/drop_packet .3.5.21.5 Missing strategy [...] sysctl table check failed: /net/ipv4/vs/secure_tcp .3.5.21.6 Missing strategy [...] sysctl table check failed: /net/ipv4/vs/sync_threshold .3.5.21.24 Missing strategy I removed the binary sysctl handler for those messages and also removed the definitions in ip_vs.h. The alternative would be to implement a proper strategy handler, but syscall sysctl is deprecated. There are other sysctl definitions that are commented out or work with the default sysctl_data strategy. I did not touch these. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-19module: fix and elaborate commentsMatti Linnanvuori
Fix and elaborate comments. Signed-off-by: Matti Linnanvuori <mattilinnanvuori@yahoo.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-11-17ntp: fix typo that makes sync_cmos_clock erraticDavid P. Reed
Fix a typo in ntp.c that has caused updating of the persistent (RTC) clock when synced to NTP to behave erratically. When debugging a freeze that arises on my AMD64 machines when I run the ntpd service, I added a number of printk's to monitor the sync_cmos_clock procedure. I discovered that it was not syncing to cmos RTC every 11 minutes as documented, but instead would keep trying every second for hours at a time. The reason turned out to be a typo in sync_cmos_clock, where it attempts to ensure that update_persistent_clock is called very close to 500 msec. after a 1 second boundary (required by the PC RTC's spec). That typo referred to "xtime" in one spot, rather than "now", which is derived from "xtime" but not equal to it. This makes the test erratic, creating a "coin-flip" that decides when update_persistent_clock is called - when it is called, which is rarely, it may be at any time during the one second period, rather than close to 500 msec, so the value written is needlessly incorrect, too. Signed-off-by: David P. Reed Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-11-17x86: ignore the sys_getcpu() tcache parameterIngo Molnar
dont use the vgetcpu tcache - it's causing problems with tasks migrating, they'll see the old cache up to a jiffy after the migration, further increasing the costs of the migration. In the worst case they see a complete bogus information from the tcache, when a sys_getcpu() call "invalidated" the cache info by incrementing the jiffies _and_ the cpuid info in the cache and the following vdso_getcpu() call happens after vdso_jiffies have been incremented. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-schedLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched: sched: reorder SCHED_FEAT_ bits sched: make sched_nr_latency static sched: remove activate_idle_task() sched: fix __set_task_cpu() SMP race sched: fix SCHED_FIFO tasks & FAIR_GROUP_SCHED sched: fix accounting of interrupts during guest execution on s390
2007-11-15sched: reorder SCHED_FEAT_ bitsIngo Molnar
reorder SCHED_FEAT_ bits so that the used ones come first. Makes tuning instructions easier. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-15sched: make sched_nr_latency staticAdrian Bunk
sched_nr_latency can now become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-15sched: remove activate_idle_task()Dmitry Adamushko
cpu_down() code is ok wrt sched_idle_next() placing the 'idle' task not at the beginning of the queue. So get rid of activate_idle_task() and make use of activate_task() instead. It is the same as activate_task(), except for the update_rq_clock(rq) call that is redundant. Code size goes down: text data bss dec hex filename 47853 3934 336 52123 cb9b sched.o.before 47828 3934 336 52098 cb82 sched.o.after Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-15sched: fix __set_task_cpu() SMP raceDmitry Adamushko
Grant Wilson has reported rare SCHED_FAIR_USER crashes on his quad-core system, which crashes can only be explained via runqueue corruption. there is a narrow SMP race in __set_task_cpu(): after ->cpu is set up to a new value, task_rq_lock(p, ...) can be successfuly executed on another CPU. We must ensure that updates of per-task data have been completed by this moment. this bug has been hiding in the Linux scheduler for an eternity (we never had any explicit barrier for task->cpu in set_task_cpu() - so the bug was introduced in 2.5.1), but only became visible via set_task_cfs_rq() being accidentally put after the task->cpu update. It also probably needs a sufficiently out-of-order CPU to trigger. Reported-by: Grant Wilson <grant.wilson@zen.co.uk> Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-15sched: fix SCHED_FIFO tasks & FAIR_GROUP_SCHEDOleg Nesterov
Suppose that the SCHED_FIFO task does switch_uid(new_user); Now, p->se.cfs_rq and p->se.parent both point into the old user_struct->tg because sched_move_task() doesn't call set_task_cfs_rq() for !fair_sched_class case. Suppose that old user_struct/task_group is freed/reused, and the task does sched_setscheduler(SCHED_NORMAL); __setscheduler() sets fair_sched_class, but doesn't update ->se.cfs_rq/parent which point to the freed memory. This means that check_preempt_wakeup() doing while (!is_same_group(se, pse)) { se = parent_entity(se); pse = parent_entity(pse); } may OOPS in a similar way if rq->curr or p did something like above. Perhaps we need something like the patch below, note that __setscheduler() can't do set_task_cfs_rq(). Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-15sched: fix accounting of interrupts during guest execution on s390Christian Borntraeger
Currently the scheduler checks for PF_VCPU to decide if this timeslice has to be accounted as guest time. On s390 host interrupts are not disabled during guest execution. This causes theses interrupts to be accounted as guest time if CONFIG_VIRT_CPU_ACCOUNTING is set. Solution is to check if an interrupt triggered account_system_time. As the tick is timer interrupt based, we have to subtract hardirq_offset. I tested the patch on s390 with CONFIG_VIRT_CPU_ACCOUNTING and on x86_64. Seems to work. CC: Avi Kivity <avi@qumranet.com> CC: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-15wait_task_stopped: Check p->exit_state instead of TASK_TRACEDRoland McGrath
The original meaning of the old test (p->state > TASK_STOPPED) was "not dead", since it was before TASK_TRACED existed and before the state/exit_state split. It was a wrong correction in commit 14bf01bb0599c89fc7f426d20353b76e12555308 to make this test for TASK_TRACED instead. It should have been changed when TASK_TRACED was introducted and again when exit_state was introduced. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Alexey Dobriyan <adobriyan@sw.ru> Cc: Kees Cook <kees@ubuntu.com> Acked-by: Scott James Remnant <scott@ubuntu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NET]: rt_check_expire() can take a long time, add a cond_resched() [ISDN] sc: Really, really fix warning [ISDN] sc: Fix sndpkt to have the correct number of arguments [TCP] FRTO: Clear frto_highmark only after process_frto that uses it [NET]: Remove notifier block from chain when register_netdevice_notifier fails [FS_ENET]: Fix module build. [TCP]: Make sure write_queue_from does not begin with NULL ptr [TCP]: Fix size calculation in sk_stream_alloc_pskb [S2IO]: Fixed memory leak when MSI-X vector allocation fails [BONDING]: Fix resource use after free [SYSCTL]: Fix warning for token-ring from sysctl checker [NET] random : secure_tcp_sequence_number should not assume CONFIG_KTIME_SCALAR [IWLWIFI]: Not correctly dealing with hotunplug. [TCP] FRTO: Plug potential LOST-bit leak [TCP] FRTO: Limit snd_cwnd if TCP was application limited [E1000]: Fix schedule while atomic when called from mii-tool. [NETX]: Fix build failure added by 2.6.24 statistics cleanup. [EP93xx_ETH]: Build fix after 2.6.24 NAPI changes. [PKT_SCHED]: Check subqueue status before calling hard_start_xmit
2007-11-14kernel/taskstats.c: fix bogus nlmsg_free()Adrian Bunk
We'd better not nlmsg_free on a pointer containing an undefined value (and without having anything allocated). Spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Balbir Singh <balbir@linux.vnet.ibm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14hibernate: fix lockdep reportJohannes Berg
Lockdep reports a circular locking dependency in the hibernate code because - during system boot hibernate code (from an initcall) locks pm_mutex and then a sysfs buffer mutex via name_to_dev_t - during regular operation hibernate code locks pm_mutex under a sysfs buffer mutex because it's called from sysfs methods. The deadlock can never happen because during initcall invocation nothing can write to sysfs yet. This removes the lockdep report by marking the initcall locking as being in a different class. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Alan Stern <stern@rowland.harvard.edu> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14__do_IRQ does not check IRQ_DISABLED when IRQ_PER_CPU is setRuss Anderson
In __do_IRQ(), the normal case is that IRQ_DISABLED is checked and if set the handler (handle_IRQ_event()) is not called. Earlier in __do_IRQ(), if IRQ_PER_CPU is set the code does not check IRQ_DISABLED and calls the handler even though IRQ_DISABLED is set. This behavior seems unintentional. One user encountering this behavior is the CPE handler (in arch/ia64/kernel/mca.c). When the CPE handler encounters too many CPEs (such as a solid single bit error), it sets up a polling timer and disables the CPE interrupt (to avoid excessive overhead logging the stream of single bit errors). disable_irq_nosync() is called which sets IRQ_DISABLED. The IRQ_PER_CPU flag was previously set (in ia64_mca_late_init()). The net result is the CPE handler gets called even though it is marked disabled. If the behavior of not checking IRQ_DISABLED when IRQ_PER_CPU is set is intentional, it would be worthy of a comment describing the intended behavior. disable_irq_nosync() does call chip->disable() to provide a chipset specifiec interface for disabling the interrupt, which avoids this issue when used. Signed-off-by: Russ Anderson <rja@sgi.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14pidns: Place under CONFIG_EXPERIMENTALEric W. Biederman
This is my trivial patch to swat innumerable little bugs with a single blow. After some intensive review (my apologies for not having gotten to this sooner) what we have looks like a good base to build on with the current pid namespace code but it is not complete, and it is still much to simple to find issues where the kernel does the wrong thing outside of the initial pid namespace. Until the dust settles and we are certain we have the ABI and the implementation is as correct as humanly possible let's keep process ID namespaces behind CONFIG_EXPERIMENTAL. Allowing us the option of fixing any ABI or other bugs we find as long as they are minor. Allowing users of the kernel to avoid those bugs simply by ensuring their kernel does not have support for multiple pid namespaces. [akpm@linux-foundation.org: coding-style cleanups] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Adrian Bunk <bunk@kernel.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Kir Kolyshkin <kir@swsoft.com> Cc: Kirill Korotaev <dev@sw.ru> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14fix param_sysfs_builtin name length checkJan Kiszka
Commit faf8c714f4508207a9c81cc94dafc76ed6680b44 caused a regression: parameter names longer than MAX_KBUILD_MODNAME will now be rejected, although we just need to keep the module name part that short. This patch restores the old behaviour while still avoiding that memchr is called with its length parameter larger than the total string length. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Cc: Dave Young <hidave.darkstar@gmail.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14Linux Kernel Markers: fix marker mutex not taken upon module loadMathieu Desnoyers
Upon module load, we must take the markers mutex. It implies that the marker mutex must be nested inside the module mutex. It implies changing the nesting order : now the marker mutex nests inside the module mutex. Make the necessary changes to reverse the order in which the mutexes are taken. Includes some cleanup from Dave Hansen <haveblue@us.ibm.com>. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14revert "Task Control Groups: example CPU accounting subsystem"Andrew Morton
Revert 62d0df64065e7c135d0002f069444fbdfc64768f. This was originally intended as a simple initial example of how to create a control groups subsystem; it wasn't intended for mainline, but I didn't make this clear enough to Andrew. The CFS cgroup subsystem now has better functionality for the per-cgroup usage accounting (based directly on CFS stats) than the "usage" status file in this patch, and the "load" status file is rather simplistic - although having a per-cgroup load average report would be a useful feature, I don't believe this patch actually provides it. If it gets into the final 2.6.24 we'd probably have to support this interface for ever. Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14Add IORESOUCE_BUSY flag for System RAMYasunori Goto
i386 and x86-64 registers System RAM as IORESOURCE_MEM | IORESOURCE_BUSY. But ia64 registers it as IORESOURCE_MEM only. In addition, memory hotplug code registers new memory as IORESOURCE_MEM too. This difference causes a failure of memory unplug of x86-64. This patch fixes it. This patch adds IORESOURCE_BUSY to avoid potential overlap mapping by PCI device. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Cc: Luck, Tony" <tony.luck@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14Improve cgroup printksDiego Calleja
When I boot with the 'quiet' parameter, I see on the screen: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 39.036026] Initializing cgroup subsys cpuacct [ 39.036080] Initializing cgroup subsys debug [ 39.036118] Initializing cgroup subsys ns This patch lowers the priority of those messages, adds a "cgroup: " prefix to another couple of printks and kills the useless reference to the source file. Signed-off-by: Diego Calleja <diegocg@gmail.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14sysctl: check length at deprecated_sysctl_warningTetsuo Handa
Original patch assumed args->nlen < CTL_MAXNAME, but it can be false. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-13[SYSCTL]: Fix warning for token-ring from sysctl checkerOlof Johansson
As seen when booting ppc64_defconfig: sysctl table check failed: /net/token-ring .3.14 procname does not match binary path procname Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12sigwait eats blocked default-ignore signalsRoland McGrath
While a signal is blocked, it must be posted even if its action is SIG_IGN or is SIG_DFL with the default action to ignore. This works right most of the time, but is broken when a sigwait (rt_sigtimedwait) is in progress. This changes the early-discard check to respect real_blocked. ~blocked is the set to check for "should wake up now", but ~(blocked|real_blocked) is the set for "blocked" semantics as defined by POSIX. This fixes bugzilla entry 9347, see http://bugzilla.kernel.org/show_bug.cgi?id=9347 Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-09[FUTEX] Fix address computation in compat code.David Miller
compat_exit_robust_list() computes a pointer to the futex entry in userspace as follows: (void __user *)entry + futex_offset 'entry' is a 'struct robust_list __user *', and 'futex_offset' is a 'compat_long_t' (typically a 's32'). Things explode if the 32-bit sign bit is set in futex_offset. Type promotion sign extends futex_offset to a 64-bit value before adding it to 'entry'. This triggered a problem on sparc64 running 32-bit applications which would lock up a cpu looping forever in the fault handling for the userspace load in handle_futex_death(). Compat userspace runs with address masking (wherein the cpu zeros out the top 32-bits of every effective address given to a memory operation instruction) so the sparc64 fault handler accounts for this by zero'ing out the top 32-bits of the fault address too. Since the kernel properly uses the compat_uptr interfaces, kernel side accesses to compat userspace work too since they will only use addresses with the top 32-bit clear. Because of this compat futex layer bug we get into the following loop when executing the get_user() load near the top of handle_futex_death(): 1) load from address '0xfffffffff7f16bd8', FAULT 2) fault handler clears upper 32-bits, processes fault for address '0xf7f16bd8' which succeeds 3) goto #1 I want to thank Bernd Zeimetz, Josip Rodin, and Fabio Massimo Di Nitto for their tireless efforts helping me track down this bug. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-09sched: proper prototype for kernel/sched.c:migration_init()Adrian Bunk
This patch adds a proper prototype for migration_init() in include/linux/sched.h Since there's no point in always returning 0 to a caller that doesn't check the return value it also changes the function to return void. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-09sched: avoid large irq-latencies in smp-balancingPeter Zijlstra
SMP balancing is done with IRQs disabled and can iterate the full rq. When rqs are large this can cause large irq-latencies. Limit the nr of iterations on each run. This fixes a scheduling latency regression reported by the -rt folks. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Steven Rostedt <rostedt@goodmis.org> Tested-by: Gregory Haskins <ghaskins@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-09sched: fix copy_namespace() <-> sched_fork() dependency in do_forkSrivatsa Vaddagiri
Sukadev Bhattiprolu reported a kernel crash with control groups. There are couple of problems discovered by Suka's test: - The test requires the cgroup filesystem to be mounted with atleast the cpu and ns options (i.e both namespace and cpu controllers are active in the same hierarchy). # mkdir /dev/cpuctl # mount -t cgroup -ocpu,ns none cpuctl (or simply) # mount -t cgroup none cpuctl -> Will activate all controllers in same hierarchy. - The test invokes clone() with CLONE_NEWNS set. This causes a a new child to be created, also a new group (do_fork->copy_namespaces->ns_cgroup_clone-> cgroup_clone) and the child is attached to the new group (cgroup_clone-> attach_task->sched_move_task). At this point in time, the child's scheduler related fields are uninitialized (including its on_rq field, which it has inherited from parent). As a result sched_move_task thinks its on runqueue, when it isn't. As a solution to this problem, I moved sched_fork() call, which initializes scheduler related fields on a new task, before copy_namespaces(). I am not sure though whether moving up will cause other side-effects. Do you see any issue? - The second problem exposed by this test is that task_new_fair() assumes that parent and child will be part of the same group (which needn't be as this test shows). As a result, cfs_rq->curr can be NULL for the child. The solution is to test for curr pointer being NULL in task_new_fair(). With the patch below, I could run ns_exec() fine w/o a crash. Reported-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-09sched: clean up the wakeup preempt check, #2Ingo Molnar
clean up the preemption check to not use unnecessary 64-bit variables. This improves code size: text data bss dec hex filename 44227 3326 36 47589 b9e5 sched.o.before 44201 3326 36 47563 b9cb sched.o.after Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-09sched: clean up the wakeup preempt checkIngo Molnar
clean up the wakeup preemption check. No code changed: text data bss dec hex filename 44227 3326 36 47589 b9e5 sched.o.before 44227 3326 36 47589 b9e5 sched.o.after Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-09sched: wakeup preemption fixIngo Molnar
wakeup preemption fix: do not make it dependent on p->prio. Preemption purely depends on ->vruntime. This improves preemption in mixed-nice-level workloads. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-09sched: remove PREEMPT_RESTRICTIngo Molnar
remove PREEMPT_RESTRICT. (this is a separate commit so that any regression related to the removal itself is bisectable) Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-09sched: turn off PREEMPT_RESTRICTIngo Molnar
PREEMPT_RESTRICT was a method aimed at reducing the amount of wakeup related preemption. It has a disadvantage though, it can prevent legitimate wakeups if a task is 'unlucky' to be hit too early by a tick that clears peer_preempt. Now that the wakeup preemption has been cleaned up we dont seem to have excessive preemptions anymore, so this feature can be turned off. (and removed in the next patch) Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-09sched: cleanup, use NSEC_PER_MSEC and NSEC_PER_SECEric Dumazet
1) hardcoded 1000000000 value is used five times in places where NSEC_PER_SEC might be more readable. 2) A conversion from nsec to msec uses the hardcoded 1000000 value, which is a candidate for NSEC_PER_MSEC. no code changed: text data bss dec hex filename 44359 3326 36 47721 ba69 sched.o.before 44359 3326 36 47721 ba69 sched.o.after Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-09sched: reintroduce SMP tunings againIngo Molnar
Yanmin Zhang reported an aim7 regression and bisected it down to: | commit 38ad464d410dadceda1563f36bdb0be7fe4c8938 | Author: Ingo Molnar <mingo@elte.hu> | Date: Mon Oct 15 17:00:02 2007 +0200 | | sched: uniform tunings | | use the same defaults on both UP and SMP. fix this by reintroducing similar SMP tunings again. This resolves the regression. (also update the comments to match the ilog2(nr_cpus) tuning effect) Signed-off-by: Ingo Molnar <mingo@elte.hu>