summaryrefslogtreecommitdiffstats
path: root/mm
AgeCommit message (Collapse)Author
2014-06-04mm/huge_memory.c: complete conversion to pr_foo()Andrew Morton
It was using a mix of pr_foo() and printk(KERN_ERR ...). Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04thp: consolidate assert checks in __split_huge_page()Kirill A. Shutemov
It doesn't make sense to have two assert checks for each invariant: one for printing and one for BUG(). Let's trigger BUG() if we print error message. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04memblock: introduce memblock_alloc_range()Akinobu Mita
This introduces memblock_alloc_range() which allocates memblock from the specified range of physical address. I would like to use this function to specify the location of CMA. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Don Dutile <ddutile@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04mm,vmacache: optimize overflow system-wide flushingDavidlohr Bueso
For single threaded workloads, we can avoid flushing and iterating through the entire list of tasks, making the whole function a lot faster, requiring only a single atomic read for the mm_users. Signed-off-by: Davidlohr Bueso <davidlohr@hp.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Cc: Aswin Chandramouleeswaran <aswin@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04mm,vmacache: add debug dataDavidlohr Bueso
Introduce a CONFIG_DEBUG_VM_VMACACHE option to enable counting the cache hit rate -- exported in /proc/vmstat. Any updates to the caching scheme needs this kind of data, thus it can save some work re-implementing the counting all the time. Signed-off-by: Davidlohr Bueso <davidlohr@hp.com> Cc: Aswin Chandramouleeswaran <aswin@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04mm: only force scan in reclaim when none of the LRUs are big enough.Suleiman Souhlal
Prior to this change, we would decide whether to force scan a LRU during reclaim if that LRU itself was too small for the current priority. However, this can lead to the file LRU getting force scanned even if there are a lot of anonymous pages we can reclaim, leading to hot file pages getting needlessly reclaimed. To address this, we instead only force scan when none of the reclaimable LRUs are big enough. Gives huge improvements with zswap. For example, when doing -j20 kernel build in a 500MB container with zswap enabled, runtime (in seconds) is greatly reduced: x without this change + with this change N Min Max Median Avg Stddev x 5 700.997 790.076 763.928 754.05 39.59493 + 5 141.634 197.899 155.706 161.9 21.270224 Difference at 95.0% confidence -592.15 +/- 46.3521 -78.5293% +/- 6.14709% (Student's t, pooled s = 31.7819) Should also give some improvements in regular (non-zswap) swap cases. Yes, hughd found significant speedup using regular swap, with several memcgs under pressure; and it should also be effective in the non-memcg case, whenever one or another zone LRU is forced too small. Signed-off-by: Suleiman Souhlal <suleiman@google.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Rafael Aquini <aquini@redhat.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Bob Liu <bob.liu@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Luigi Semenzato <semenzato@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04mm: softdirty: don't forget to save file map softdiry bit on unmapCyrill Gorcunov
pte_file_mksoft_dirty operates with argument passed by a value and returns modified result thus we need to assign @ptfile here, otherwise itis a no-op which may lead to loss of the softdirty bit. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04mm: softdirty: make freshly remapped file pages being softdirty unconditionallyCyrill Gorcunov
Hugh reported: | I noticed your soft_dirty work in install_file_pte(): which looked | good at first, until I realized that it's propagating the soft_dirty | of a pte it's about to zap completely, to the unrelated entry it's | about to insert in its place. Which seems very odd to me. Indeed this code ends up being nop in result -- pte_file_mksoft_dirty() operates with pte_t argument and returns new pte_t which were never used after. After looking more I think what we need is to soft-dirtify all newely remapped file pages because it should look like a new mapping for memory tracker. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Reported-by: Hugh Dickins <hughd@google.com> Cc: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04mm: get rid of __GFP_KMEMCGVladimir Davydov
Currently to allocate a page that should be charged to kmemcg (e.g. threadinfo), we pass __GFP_KMEMCG flag to the page allocator. The page allocated is then to be freed by free_memcg_kmem_pages. Apart from looking asymmetrical, this also requires intrusion to the general allocation path. So let's introduce separate functions that will alloc/free pages charged to kmemcg. The new functions are called alloc_kmem_pages and free_kmem_pages. They should be used when the caller actually would like to use kmalloc, but has to fall back to the page allocator for the allocation is large. They only differ from alloc_pages and free_pages in that besides allocating or freeing pages they also charge them to the kmem resource counter of the current memory cgroup. [sfr@canb.auug.org.au: export kmalloc_order() to modules] Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Acked-by: Greg Thelen <gthelen@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Glauber Costa <glommer@gmail.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04sl[au]b: charge slabs to kmemcg explicitlyVladimir Davydov
We have only a few places where we actually want to charge kmem so instead of intruding into the general page allocation path with __GFP_KMEMCG it's better to explictly charge kmem there. All kmem charges will be easier to follow that way. This is a step towards removing __GFP_KMEMCG. It removes __GFP_KMEMCG from memcg caches' allocflags. Instead it makes slab allocation path call memcg_charge_kmem directly getting memcg to charge from the cache's memcg params. This also eliminates any possibility of misaccounting an allocation going from one memcg's cache to another memcg, because now we always charge slabs against the memcg the cache belongs to. That's why this patch removes the big comment to memcg_kmem_get_cache. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Acked-by: Greg Thelen <gthelen@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Glauber Costa <glommer@gmail.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04mm: slub: fix ALLOC_SLOWPATH statDave Hansen
There used to be only one path out of __slab_alloc(), and ALLOC_SLOWPATH got bumped in that exit path. Now there are two, and a bunch of gotos. ALLOC_SLOWPATH can now get set more than once during a single call to __slab_alloc() which is pretty bogus. Here's the sequence: 1. Enter __slab_alloc(), fall through all the way to the stat(s, ALLOC_SLOWPATH); 2. hit 'if (!freelist)', and bump DEACTIVATE_BYPASS, jump to new_slab (goto #1) 3. Hit 'if (c->partial)', bump CPU_PARTIAL_ALLOC, goto redo (goto #2) 4. Fall through in the same path we did before all the way to stat(s, ALLOC_SLOWPATH) 5. bump ALLOC_REFILL stat, then return Doing this is obviously bogus. It keeps us from being able to accurately compare ALLOC_SLOWPATH vs. ALLOC_FASTPATH. It also means that the total number of allocs always exceeds the total number of frees. This patch moves stat(s, ALLOC_SLOWPATH) to be called from the same place that __slab_alloc() is. This makes it much less likely that ALLOC_SLOWPATH will get botched again in the spaghetti-code inside __slab_alloc(). Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Christoph Lameter <cl@linux.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04mm, slab: suppress out of memory warning unless debug is enabledDavid Rientjes
When the slab or slub allocators cannot allocate additional slab pages, they emit diagnostic information to the kernel log such as current number of slabs, number of objects, active objects, etc. This is always coupled with a page allocation failure warning since it is controlled by !__GFP_NOWARN. Suppress this out of memory warning if the allocator is configured without debug supported. The page allocation failure warning will indicate it is a failed slab allocation, the order, and the gfp mask, so this is only useful to diagnose allocator issues. Since CONFIG_SLUB_DEBUG is already enabled by default for the slub allocator, there is no functional change with this patch. If debug is disabled, however, the warnings are now suppressed. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Pekka Enberg <penberg@kernel.org> Acked-by: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04mm/slub.c: convert vnsprintf-static to va_formatFabian Frederick
Inspired by Joe Perches suggestion in ntfs logging clean-up. Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: Christoph Lameter <cl@linux.com> Cc: Joe Perches <joe@perches.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04mm/slub.c: convert printk to pr_foo()Fabian Frederick
All printk(KERN_foo converted to pr_foo() Default printk converted to pr_warn() Coalesce format fragments Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: Christoph Lameter <cl@linux.com> Cc: Joe Perches <joe@perches.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04x86: define _PAGE_NUMA by reusing software bits on the PMD and PTE levelsMel Gorman
_PAGE_NUMA is currently an alias of _PROT_PROTNONE to trap NUMA hinting faults on x86. Care is taken such that _PAGE_NUMA is used only in situations where the VMA flags distinguish between NUMA hinting faults and prot_none faults. This decision was x86-specific and conceptually it is difficult requiring special casing to distinguish between PROTNONE and NUMA ptes based on context. Fundamentally, we only need the _PAGE_NUMA bit to tell the difference between an entry that is really unmapped and a page that is protected for NUMA hinting faults as if the PTE is not present then a fault will be trapped. Swap PTEs on x86-64 use the bits after _PAGE_GLOBAL for the offset. This patch shrinks the maximum possible swap size and uses the bit to uniquely distinguish between NUMA hinting ptes and swap ptes. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Anvin <hpa@zytor.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Steven Noonan <steven@uplinklabs.net> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04hugetlb: restrict hugepage_migration_support() to x86_64Naoya Horiguchi
Currently hugepage migration is available for all archs which support pmd-level hugepage, but testing is done only for x86_64 and there're bugs for other archs. So to avoid breaking such archs, this patch limits the availability strictly to x86_64 until developers of other archs get interested in enabling this feature. Simply disabling hugepage migration on non-x86_64 archs is not enough to fix the reported problem where sys_move_pages() hits the BUG_ON() in follow_page(FOLL_GET), so let's fix this by checking if hugepage migration is supported in vma_migratable(). Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reported-by: Michael Ellerman <mpe@ellerman.id.au> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Hugh Dickins <hughd@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Miller <davem@davemloft.net> Cc: <stable@vger.kernel.org> [3.12+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04mm: fix sleeping function warning from __put_anon_vmaHugh Dickins
Trinity reports BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:47 in_atomic(): 0, irqs_disabled(): 0, pid: 5787, name: trinity-c27 __might_sleep < down_write < __put_anon_vma < page_get_anon_vma < migrate_pages < compact_zone < compact_zone_order < try_to_compact_pages .. Right, since conversion to mutex then rwsem, we should not put_anon_vma() from inside an rcu_read_lock()ed section: fix the two places that did so. And add might_sleep() to anon_vma_free(), as suggested by Peter Zijlstra. Fixes: 88c22088bf23 ("mm: optimize page_lock_anon_vma() fast-path") Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial into next Pull trivial tree changes from Jiri Kosina: "Usual pile of patches from trivial tree that make the world go round" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits) staging: go7007: remove reference to CONFIG_KMOD aic7xxx: Remove obsolete preprocessor define of: dma: doc fixes doc: fix incorrect formula to calculate CommitLimit value doc: Note need of bc in the kernel build from 3.10 onwards mm: Fix printk typo in dmapool.c modpost: Fix comment typo "Modules.symvers" Kconfig.debug: Grammar s/addition/additional/ wimax: Spelling s/than/that/, wording s/destinatary/recipient/ aic7xxx: Spelling s/termnation/termination/ arm64: mm: Remove superfluous "the" in comment of: Spelling s/anonymouns/anonymous/ dma: imx-sdma: Spelling s/determnine/determine/ ath10k: Improve grammar in comments ath6kl: Spelling s/determnine/determine/ of: Improve grammar for of_alias_get_id() documentation drm/exynos: Spelling s/contro/control/ radio-bcm2048.c: fix wrong overflow check doc: printk-formats: do not mention casts for u64/s64 doc: spelling error changes ...
2014-06-03Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next Pull scheduler updates from Ingo Molnar: "The main scheduling related changes in this cycle were: - various sched/numa updates, for better performance - tree wide cleanup of open coded nice levels - nohz fix related to rq->nr_running use - cpuidle changes and continued consolidation to improve the kernel/sched/idle.c high level idle scheduling logic. As part of this effort I pulled cpuidle driver changes from Rafael as well. - standardized idle polling amongst architectures - continued work on preparing better power/energy aware scheduling - sched/rt updates - misc fixlets and cleanups" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits) sched/numa: Decay ->wakee_flips instead of zeroing sched/numa: Update migrate_improves/degrades_locality() sched/numa: Allow task switch if load imbalance improves sched/rt: Fix 'struct sched_dl_entity' and dl_task_time() comments, to match the current upstream code sched: Consolidate open coded implementations of nice level frobbing into nice_to_rlimit() and rlimit_to_nice() sched: Initialize rq->age_stamp on processor start sched, nohz: Change rq->nr_running to always use wrappers sched: Fix the rq->next_balance logic in rebalance_domains() and idle_balance() sched: Use clamp() and clamp_val() to make sys_nice() more readable sched: Do not zero sg->cpumask and sg->sgp->power in build_sched_groups() sched/numa: Fix initialization of sched_domain_topology for NUMA sched: Call select_idle_sibling() when not affine_sd sched: Simplify return logic in sched_read_attr() sched: Simplify return logic in sched_copy_attr() sched: Fix exec_start/task_hot on migrated tasks arm64: Remove TIF_POLLING_NRFLAG metag: Remove TIF_POLLING_NRFLAG sched/idle: Make cpuidle_idle_call() void sched/idle: Reflow cpuidle_idle_call() sched/idle: Delay clearing the polling bit ...
2014-06-03Merge branch 'locking-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next Pull core locking updates from Ingo Molnar: "The main changes in this cycle were: - reduced/streamlined smp_mb__*() interface that allows more usecases and makes the existing ones less buggy, especially in rarer architectures - add rwsem implementation comments - bump up lockdep limits" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits) rwsem: Add comments to explain the meaning of the rwsem's count field lockdep: Increase static allocations arch: Mass conversion of smp_mb__*() arch,doc: Convert smp_mb__*() arch,xtensa: Convert smp_mb__*() arch,x86: Convert smp_mb__*() arch,tile: Convert smp_mb__*() arch,sparc: Convert smp_mb__*() arch,sh: Convert smp_mb__*() arch,score: Convert smp_mb__*() arch,s390: Convert smp_mb__*() arch,powerpc: Convert smp_mb__*() arch,parisc: Convert smp_mb__*() arch,openrisc: Convert smp_mb__*() arch,mn10300: Convert smp_mb__*() arch,mips: Convert smp_mb__*() arch,metag: Convert smp_mb__*() arch,m68k: Convert smp_mb__*() arch,m32r: Convert smp_mb__*() arch,ia64: Convert smp_mb__*() ...
2014-06-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux into next Pull first set of s390 updates from Martin Schwidefsky: "The biggest change in this patchset is conversion from the bootmem bitmaps to the memblock code. This conversion requires two common code patches to introduce the 'physmem' memblock list. We experimented with ticket spinlocks but in the end decided against them as they perform poorly on virtualized systems. But the spinlock cleanup and some small improvements are included. The uaccess code got another optimization, the get_user/put_user calls are now inline again for kernel compiles targeted at z10 or newer machines. This makes the text segment shorter and the code gets a little bit faster. And as always some bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (31 commits) s390/lowcore: replace lowcore irb array with a per-cpu variable s390/lowcore: reserve 96 bytes for IRB in lowcore s390/facilities: remove extract-cpu-time facility check s390: require mvcos facility for z10 and newer machines s390/boot: fix boot of compressed kernel built with gcc 4.9 s390/cio: remove weird assignment during argument evaluation s390/time: cast tv_nsec to u64 prior to shift in update_vsyscall s390/oprofile: make return of 0 explicit s390/spinlock: refactor arch_spin_lock_wait[_flags] s390/rwlock: add missing local_irq_restore calls s390/spinlock,rwlock: always to a load-and-test first s390/cio: fix multiple structure definitions s390/spinlock: fix system hang with spin_retry <= 0 s390/appldata: add slab.h for kzalloc/kfree s390/uaccess: provide inline variants of get_user/put_user s390/pci: add some new arch specific pci attributes s390/pci: use pdev->dev.groups for attribute creation s390/pci: use macro for attribute creation s390/pci: improve state check when processing hotplug events s390: split TIF bits into CIF, PIF and TIF bits ...
2014-06-02Merge branch 'for-3.16/core' of git://git.kernel.dk/linux-block into nextLinus Torvalds
Pull block core updates from Jens Axboe: "It's a big(ish) round this time, lots of development effort has gone into blk-mq in the last 3 months. Generally we're heading to where 3.16 will be a feature complete and performant blk-mq. scsi-mq is progressing nicely and will hopefully be in 3.17. A nvme port is in progress, and the Micron pci-e flash driver, mtip32xx, is converted and will be sent in with the driver pull request for 3.16. This pull request contains: - Lots of prep and support patches for scsi-mq have been integrated. All from Christoph. - API and code cleanups for blk-mq from Christoph. - Lots of good corner case and error handling cleanup fixes for blk-mq from Ming Lei. - A flew of blk-mq updates from me: * Provide strict mappings so that the driver can rely on the CPU to queue mapping. This enables optimizations in the driver. * Provided a bitmap tagging instead of percpu_ida, which never really worked well for blk-mq. percpu_ida relies on the fact that we have a lot more tags available than we really need, it fails miserably for cases where we exhaust (or are close to exhausting) the tag space. * Provide sane support for shared tag maps, as utilized by scsi-mq * Various fixes for IO timeouts. * API cleanups, and lots of perf tweaks and optimizations. - Remove 'buffer' from struct request. This is ancient code, from when requests were always virtually mapped. Kill it, to reclaim some space in struct request. From me. - Remove 'magic' from blk_plug. Since we store these on the stack and since we've never caught any actual bugs with this, lets just get rid of it. From me. - Only call part_in_flight() once for IO completion, as includes two atomic reads. Hopefully we'll get a better implementation soon, as the part IO stats are now one of the more expensive parts of doing IO on blk-mq. From me. - File migration of block code from {mm,fs}/ to block/. This includes bio.c, bio-integrity.c, bounce.c, and ioprio.c. From me, from a discussion on lkml. That should describe the meat of the pull request. Also has various little fixes and cleanups from Dave Jones, Shaohua Li, Duan Jiong, Fengguang Wu, Fabian Frederick, Randy Dunlap, Robert Elliott, and Sam Bradshaw" * 'for-3.16/core' of git://git.kernel.dk/linux-block: (100 commits) blk-mq: push IPI or local end_io decision to __blk_mq_complete_request() blk-mq: remember to start timeout handler for direct queue block: ensure that the timer is always added blk-mq: blk_mq_unregister_hctx() can be static blk-mq: make the sysfs mq/ layout reflect current mappings blk-mq: blk_mq_tag_to_rq should handle flush request block: remove dead code in scsi_ioctl:blk_verify_command blk-mq: request initialization optimizations block: add queue flag for disabling SG merging block: remove 'magic' from struct blk_plug blk-mq: remove alloc_hctx and free_hctx methods blk-mq: add file comments and update copyright notices blk-mq: remove blk_mq_alloc_request_pinned blk-mq: do not use blk_mq_alloc_request_pinned in blk_mq_map_request blk-mq: remove blk_mq_wait_for_tags blk-mq: initialize request in __blk_mq_alloc_request blk-mq: merge blk_mq_alloc_reserved_request into blk_mq_alloc_request blk-mq: add helper to insert requests from irq context blk-mq: remove stale comment for blk_mq_complete_request() blk-mq: allow non-softirq completions ...
2014-05-23mm/memory-failure.c: fix memory leak by race between poison and unpoisonNaoya Horiguchi
When a memory error happens on an in-use page or (free and in-use) hugepage, the victim page is isolated with its refcount set to one. When you try to unpoison it later, unpoison_memory() calls put_page() for it twice in order to bring the page back to free page pool (buddy or free hugepage list). However, if another memory error occurs on the page which we are unpoisoning, memory_failure() returns without releasing the refcount which was incremented in the same call at first, which results in memory leak and unconsistent num_poisoned_pages statistics. This patch fixes it. Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: <stable@vger.kernel.org> [2.6.32+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-23memcg: fix swapcache charge from kernel thread contextMichal Hocko
Commit 284f39afeaa4 ("mm: memcg: push !mm handling out to page cache charge function") explicitly checks for page cache charges without any mm context (from kernel thread context[1]). This seemed to be the only possible case where memory could be charged without mm context so commit 03583f1a631c ("memcg: remove unnecessary !mm check from try_get_mem_cgroup_from_mm()") removed the mm check from get_mem_cgroup_from_mm(). This however caused another NULL ptr dereference during early boot when loopback kernel thread splices to tmpfs as reported by Stephan Kulow: BUG: unable to handle kernel NULL pointer dereference at 0000000000000360 IP: get_mem_cgroup_from_mm.isra.42+0x2b/0x60 Oops: 0000 [#1] SMP Modules linked in: btrfs dm_multipath dm_mod scsi_dh multipath raid10 raid456 async_raid6_recov async_memcpy async_pq raid6_pq async_xor xor async_tx raid1 raid0 md_mod parport_pc parport nls_utf8 isofs usb_storage iscsi_ibft iscsi_boot_sysfs arc4 ecb fan thermal nfs lockd fscache nls_iso8859_1 nls_cp437 sg st hid_generic usbhid af_packet sunrpc sr_mod cdrom ata_generic uhci_hcd virtio_net virtio_blk ehci_hcd usbcore ata_piix floppy processor button usb_common virtio_pci virtio_ring virtio edd squashfs loop ppa] CPU: 0 PID: 97 Comm: loop1 Not tainted 3.15.0-rc5-5-default #1 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: __mem_cgroup_try_charge_swapin+0x40/0xe0 mem_cgroup_charge_file+0x8b/0xd0 shmem_getpage_gfp+0x66b/0x7b0 shmem_file_splice_read+0x18f/0x430 splice_direct_to_actor+0xa2/0x1c0 do_lo_receive+0x5a/0x60 [loop] loop_thread+0x298/0x720 [loop] kthread+0xc6/0xe0 ret_from_fork+0x7c/0xb0 Also Branimir Maksimovic reported the following oops which is tiggered for the swapcache charge path from the accounting code for kernel threads: CPU: 1 PID: 160 Comm: kworker/u8:5 Tainted: P OE 3.15.0-rc5-core2-custom #159 Hardware name: System manufacturer System Product Name/MAXIMUSV GENE, BIOS 1903 08/19/2013 task: ffff880404e349b0 ti: ffff88040486a000 task.ti: ffff88040486a000 RIP: get_mem_cgroup_from_mm.isra.42+0x2b/0x60 Call Trace: __mem_cgroup_try_charge_swapin+0x45/0xf0 mem_cgroup_charge_file+0x9c/0xe0 shmem_getpage_gfp+0x62c/0x770 shmem_write_begin+0x38/0x40 generic_perform_write+0xc5/0x1c0 __generic_file_aio_write+0x1d1/0x3f0 generic_file_aio_write+0x4f/0xc0 do_sync_write+0x5a/0x90 do_acct_process+0x4b1/0x550 acct_process+0x6d/0xa0 do_exit+0x827/0xa70 kthread+0xc3/0xf0 This patch fixes the issue by reintroducing mm check into get_mem_cgroup_from_mm. We could do the same trick in __mem_cgroup_try_charge_swapin as we do for the regular page cache path but it is not worth troubles. The check is not that expensive and it is better to have get_mem_cgroup_from_mm more robust. [1] - http://marc.info/?l=linux-mm&m=139463617808941&w=2 Fixes: 03583f1a631c ("memcg: remove unnecessary !mm check from try_get_mem_cgroup_from_mm()") Reported-and-tested-by: Stephan Kulow <coolo@suse.com> Reported-by: Branimir Maksimovic <branimir.maksimovic@gmail.com> Signed-off-by: Michal Hocko <mhocko@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-23mm: madvise: fix MADV_WILLNEED on shmem swapoutsJohannes Weiner
MADV_WILLNEED currently does not read swapped out shmem pages back in. Commit 0cd6144aadd2 ("mm + fs: prepare for non-page entries in page cache radix trees") made find_get_page() filter exceptional radix tree entries but failed to convert all find_get_page() callers that WANT exceptional entries over to find_get_entry(). One of them is shmem swap readahead in madvise, which now skips over any swap-out records. Convert it to find_get_entry(). Fixes: 0cd6144aadd2 ("mm + fs: prepare for non-page entries in page cache radix trees") Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-23mm/filemap.c: avoid always dirtying mapping->flags on O_DIRECTJens Axboe
In some testing I ran today (some fio jobs that spread over two nodes), we end up spending 40% of the time in filemap_check_errors(). That smells fishy. Looking further, this is basically what happens: blkdev_aio_read() generic_file_aio_read() filemap_write_and_wait_range() if (!mapping->nr_pages) filemap_check_errors() and filemap_check_errors() always attempts two test_and_clear_bit() on the mapping flags, thus dirtying it for every single invocation. The patch below tests each of these bits before clearing them, avoiding this issue. In my test case (4-socket box), performance went from 1.7M IOPS to 4.0M IOPS. Signed-off-by: Jens Axboe <axboe@fb.com> Acked-by: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-23hwpoison, hugetlb: lock_page/unlock_page does not match for handling a free ↵Chen Yucong
hugepage For handling a free hugepage in memory failure, the race will happen if another thread hwpoisoned this hugepage concurrently. So we need to check PageHWPoison instead of !PageHWPoison. If hwpoison_filter(p) returns true or a race happens, then we need to unlock_page(hpage). Signed-off-by: Chen Yucong <slaoub@gmail.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Tested-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Cc: <stable@vger.kernel.org> [2.6.36+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-22Merge tag 'v3.15-rc6' into sched/core, to pick up the latest fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-05-21Merge remote-tracking branch 'origin/x86/urgent' into x86/vdsoH. Peter Anvin
Resolved Conflicts: arch/x86/vdso/vdso32-setup.c Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-05-21Merge remote-tracking branch 'origin/x86/espfix' into x86/vdsoH. Peter Anvin
Merge x86/espfix into x86/vdso, due to changes in the vdso setup code that otherwise cause conflicts. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-05-20x86, mm: Improve _install_special_mapping and fix x86 vdso namingAndy Lutomirski
Using arch_vma_name to give special mappings a name is awkward. x86 currently implements it by comparing the start address of the vma to the expected address of the vdso. This requires tracking the start address of special mappings and is probably buggy if a special vma is split or moved. Improve _install_special_mapping to just name the vma directly. Use it to give the x86 vvar area a name, which should make CRIU's life easier. As a side effect, the vvar area will show up in core dumps. This could be considered weird and is fixable. [hpa: I say we accept this as-is but be prepared to deal with knocking out the vvars from core dumps if this becomes a problem.] Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/r/276b39b6b645fb11e345457b503f17b83c2c6fd0.1400538962.git.luto@amacapital.net Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-05-20mm/memblock: add physical memory listPhilipp Hachtmann
Add the physmem list to the memblock structure. This list only exists if HAVE_MEMBLOCK_PHYS_MAP is selected and contains the unmodified list of physically available memory. It differs from the memblock memory list as it always contains all memory ranges even if the memory has been restricted, e.g. by use of the mem= kernel parameter. Signed-off-by: Philipp Hachtmann <phacht@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-05-20mm/memblock: Do some refactoring, enhance APIPhilipp Hachtmann
Refactor the memblock code and extend the memblock API to make it more flexible. With the extended API it is simple to define and work with additional memory lists. The static functions memblock_add_region and __memblock_remove are renamed to memblock_add_range and meblock_remove_range and added to the memblock API. The __next_free_mem_range and __next_free_mem_range_rev functions are replaced with calls to the more generic list walkers __next_mem_range and __next_mem_range_rev. To walk an arbitrary memory list two new macros for_each_mem_range and for_each_mem_range_rev are added. These new macros are used to define for_each_free_mem_range and for_each_free_mem_range_reverse. Signed-off-by: Philipp Hachtmann <phacht@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-05-20Merge tag 'metag-for-v3.15-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag Pull Metag architecture and related fixes from James Hogan: "Mostly fixes for metag and parisc relating to upgrowing stacks. - Fix missing compiler barriers in metag memory barriers. - Fix BUG_ON on metag when RLIMIT_STACK hard limit is increased beyond safe value. - Make maximum stack size configurable. This reduces the default user stack size back to 80MB (especially on parisc after their removal of _STK_LIM_MAX override). This only affects metag and parisc. - Remove metag _STK_LIM_MAX override to match other arches and follow parisc, now that it is safe to do so (due to the BUG_ON fix mentioned above). - Finally now that both metag and parisc _STK_LIM_MAX overrides have been removed, it makes sense to remove _STK_LIM_MAX altogether" * tag 'metag-for-v3.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: asm-generic: remove _STK_LIM_MAX metag: Remove _STK_LIM_MAX override parisc,metag: Do not hardcode maximum userspace stack size metag: Reduce maximum stack size to 256MB metag: fix memory barriers
2014-05-19block: move mm/bounce.c to block/Jens Axboe
Continue moving some of the block files that are scattered around. bounce.c contains only code for bouncing the contents of a bio. It's block proper code, not mm code. Suggested-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-16memcg: update memcg_has_children() to use css_next_child()Tejun Heo
Currently, memcg_has_children() and mem_cgroup_hierarchy_write() directly test cgroup->children for list emptiness. It's semantically correct in traditional hierarchies as it actually wants to test for any children dead or alive; however, cgroup->children is not a published field and scheduled to go away. This patch moves out .use_hierarchy test out of memcg_has_children() and updates it to use css_next_child() to test whether there exists any children. With .use_hierarchy test moved out, it can also be used by mem_cgroup_hierarchy_write(). A side note: As .use_hierarchy is going away, it doesn't really matter but I'm not sure about how it's used in __memcg_activate_kmem(). The condition tested by memcg_has_children() is mushy when seen from userland as its result is affected by dead csses which aren't visible from userland. I think the rule would be a lot clearer if we have a dedicated "freshly minted" flag which gets cleared when the first task is migrated into it or the first child is created and then gate activation with that. v2: Added comment noting that testing use_hierarchy is the responsibility of the callers of memcg_has_children() as suggested by Michal Hocko. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Li Zefan <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org>
2014-05-16memcg: remove tasks/children test from mem_cgroup_force_empty()Michal Hocko
Tejun has correctly pointed out that tasks/children test in mem_cgroup_force_empty is not correct because there is no other locking which preserves this state throughout the rest of the function so both new tasks can join the group or new children groups can be added while somebody is writing to memory.force_empty. A new task would break mem_cgroup_reparent_charges expectation that all failures as described by mem_cgroup_force_empty_list are temporal and there is no way out. The main use case for the knob as described by Documentation/cgroups/memory.txt is to: " The typical use case for this interface is before calling rmdir(). Because rmdir() moves all pages to parent, some out-of-use page caches can be moved to the parent. If you want to avoid that, force_empty will be useful. " This means that reparenting is not really required as rmdir will reparent pages implicitly from the safe context. If we remove it from mem_cgroup_force_empty then we are safe even with existing tasks because the number of reclaim attempts is bounded. Moreover the knob still does what the documentation claims (modulo reparenting which doesn't make any difference) and users might expect. Longterm we want to deprecate the whole knob and put the reparented pages to the tail of parent LRU during cgroup removal. tj: Removed unused variable @cgrp from mem_cgroup_force_empty() Signed-off-by: Michal Hocko <mhocko@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-05-16cgroup: remove css_parent()Tejun Heo
cgroup in general is moving towards using cgroup_subsys_state as the fundamental structural component and css_parent() was introduced to convert from using cgroup->parent to css->parent. It was quite some time ago and we're moving forward with making css more prominent. This patch drops the trivial wrapper css_parent() and let the users dereference css->parent. While at it, explicitly mark fields of css which are public and immutable. v2: New usage from device_cgroup.c converted. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: "David S. Miller" <davem@davemloft.net> Acked-by: Li Zefan <lizefan@huawei.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Johannes Weiner <hannes@cmpxchg.org>
2014-05-15parisc,metag: Do not hardcode maximum userspace stack sizeHelge Deller
This patch affects only architectures where the stack grows upwards (currently parisc and metag only). On those do not hardcode the maximum initial stack size to 1GB for 32-bit processes, but make it configurable via a config option. The main problem with the hardcoded stack size is, that we have two memory regions which grow upwards: stack and heap. To keep most of the memory available for heap in a flexmap memory layout, it makes no sense to hard allocate up to 1GB of the memory for stack which can't be used as heap then. This patch makes the stack size for 32-bit processes configurable and uses 80MB as default value which has been in use during the last few years on parisc and which hasn't showed any problems yet. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: linux-parisc@vger.kernel.org Cc: linux-metag@vger.kernel.org Cc: John David Anglin <dave.anglin@bell.net>
2014-05-13cgroup: replace cftype->trigger() with cftype->write()Tejun Heo
cftype->trigger() is pointless. It's trivial to ignore the input buffer from a regular ->write() operation. Convert all ->trigger() users to ->write() and remove ->trigger(). This patch doesn't introduce any visible behavior changes. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz>
2014-05-13cgroup: replace cftype->write_string() with cftype->write()Tejun Heo
Convert all cftype->write_string() users to the new cftype->write() which maps directly to kernfs write operation and has full access to kernfs and cgroup contexts. The conversions are mostly mechanical. * @css and @cft are accessed using of_css() and of_cft() accessors respectively instead of being specified as arguments. * Should return @nbytes on success instead of 0. * @buf is not trimmed automatically. Trim if necessary. Note that blkcg and netprio don't need this as the parsers already handle whitespaces. cftype->write_string() has no user left after the conversions and removed. While at it, remove unnecessary local variable @p in cgroup_subtree_control_write() and stale comment about CGROUP_LOCAL_BUFFER_SIZE in cgroup_freezer.c. This patch doesn't introduce any visible behavior changes. v2: netprio was missing from conversion. Converted. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Aristeu Rozanski <arozansk@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Li Zefan <lizefan@huawei.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: "David S. Miller" <davem@davemloft.net>
2014-05-13cgroup: rename css_tryget*() to css_tryget_online*()Tejun Heo
Unlike the more usual refcnting, what css_tryget() provides is the distinction between online and offline csses instead of protection against upping a refcnt which already reached zero. cgroup is planning to provide actual tryget which fails if the refcnt already reached zero. Let's rename the existing trygets so that they clearly indicate that they're onliness. I thought about keeping the existing names as-are and introducing new names for the planned actual tryget; however, given that each controller participates in the synchronization of the online state, it seems worthwhile to make it explicit that these functions are about on/offline state. Rename css_tryget() to css_tryget_online() and css_tryget_from_dir() to css_tryget_online_from_dir(). This is pure rename. v2: cgroup_freezer grew new usages of css_tryget(). Update accordingly. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Li Zefan <lizefan@huawei.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
2014-05-13Merge branch 'for-3.15-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu Pull a percpu fix from Tejun Heo: "Fix for a percpu allocator bug where it could try to kfree() a memory region allocated using vmalloc(). The bug has been there for years now and is unlikely to have ever triggered given the size of struct pcpu_chunk. It's still theoretically possible and the fix is simple and safe enough, so the patch is marked with -stable" * 'for-3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: make pcpu_alloc_chunk() use pcpu_mem_free() instead of kfree()
2014-05-12ext4: fix data integrity sync in ordered modeNamjae Jeon
When we perform a data integrity sync we tag all the dirty pages with PAGECACHE_TAG_TOWRITE at start of ext4_da_writepages. Later we check for this tag in write_cache_pages_da and creates a struct mpage_da_data containing contiguously indexed pages tagged with this tag and sync these pages with a call to mpage_da_map_and_submit. This process is done in while loop until all the PAGECACHE_TAG_TOWRITE pages are synced. We also do journal start and stop in each iteration. journal_stop could initiate journal commit which would call ext4_writepage which in turn will call ext4_bio_write_page even for delayed OR unwritten buffers. When ext4_bio_write_page is called for such buffers, even though it does not sync them but it clears the PAGECACHE_TAG_TOWRITE of the corresponding page and hence these pages are also not synced by the currently running data integrity sync. We will end up with dirty pages although sync is completed. This could cause a potential data loss when the sync call is followed by a truncate_pagecache call, which is exactly the case in collapse_range. (It will cause generic/127 failure in xfstests) To avoid this issue, we can use set_page_writeback_keepwrite instead of set_page_writeback, which doesn't clear TOWRITE tag. Cc: stable@vger.kernel.org Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2014-05-11mm, thp: close race between mremap() and split_huge_page()Kirill A. Shutemov
It's critical for split_huge_page() (and migration) to catch and freeze all PMDs on rmap walk. It gets tricky if there's concurrent fork() or mremap() since usually we copy/move page table entries on dup_mm() or move_page_tables() without rmap lock taken. To get it work we rely on rmap walk order to not miss any entry. We expect to see destination VMA after source one to work correctly. But after switching rmap implementation to interval tree it's not always possible to preserve expected walk order. It works fine for dup_mm() since new VMA has the same vma_start_pgoff() / vma_last_pgoff() and explicitly insert dst VMA after src one with vma_interval_tree_insert_after(). But on move_vma() destination VMA can be merged into adjacent one and as result shifted left in interval tree. Fortunately, we can detect the situation and prevent race with rmap walk by moving page table entries under rmap lock. See commit 38a76013ad80. Problem is that we miss the lock when we move transhuge PMD. Most likely this bug caused the crash[1]. [1] http://thread.gmane.org/gmane.linux.kernel.mm/96473 Fixes: 108d6642ad81 ("mm anon rmap: remove anon_vma_moveto_tail") Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Acked-by: Michel Lespinasse <walken@google.com> Cc: Dave Jones <davej@redhat.com> Cc: David Miller <davem@davemloft.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> [3.7+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-11mm: postpone the disabling of kmemleak early loggingCatalin Marinas
Commit 8910ae896c8c ("kmemleak: change some global variables to int"), in addition to the atomic -> int conversion, moved the disabling of kmemleak_early_log to the beginning of the kmemleak_init() function, before the full kmemleak tracing is actually enabled. In this small window, kmem_cache_create() is called by kmemleak which triggers additional memory allocation that are not traced. This patch restores the original logic with kmemleak_early_log disabling when kmemleak is fully functional. Fixes: 8910ae896c8c (kmemleak: change some global variables to int) Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Li Zefan <lizefan@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-07mm/numa: Remove BUG_ON() in __handle_mm_fault()Rik van Riel
Changing PTEs and PMDs to pte_numa & pmd_numa is done with the mmap_sem held for reading, which means a pmd can be instantiated and turned into a numa one while __handle_mm_fault() is examining the value of old_pmd. If that happens, __handle_mm_fault() should just return and let the page fault retry, instead of throwing an oops. This is handled by the test for pmd_trans_huge(*pmd) below. Signed-off-by: Rik van Riel <riel@redhat.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reported-by: Sunil Pandey <sunil.k.pandey@intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: linux-mm@kvack.org Cc: lwoodman@redhat.com Cc: dave.hansen@intel.com Link: http://lkml.kernel.org/r/20140429153615.2d72098e@annuminas.surriel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-05-07Merge branch 'sched/urgent' into sched/core, to avoid conflictsIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-05-06bio_vec-backed iov_iterAl Viro
New variant of iov_iter - ITER_BVEC in iter->type, backed with bio_vec array instead of iovec one. Primitives taught to deal with such beasts, __swap_write() switched to using that kind of iov_iter. Note that bio_vec is just a <page, offset, length> triple - there's nothing block-specific about it. I've left the definition where it was, but took it from under ifdef CONFIG_BLOCK. Next target: ->splice_write()... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06optimize copy_page_{to,from}_iter()Al Viro
if we'd ended up in the end of a segment, jump to the beginning of the next one (iov_offset = 0, iov++), rather than having the next primitive deal with that. Ought to be folded back... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>