summaryrefslogtreecommitdiffstats
path: root/net/bluetooth/hidp
AgeCommit message (Collapse)Author
2013-11-04Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
2013-10-19net: 8021q/bluetooth/bridge/can/ceph: Remove extern from function prototypesJoe Perches
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-13Bluetooth: Access HIDP session addresses through L2CAP channelMarcel Holtmann
The L2CAP socket structure does not contain the address information anymore. They need to be accessed through the L2CAP channel. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-09-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: "Highlights: - conversion of HID subsystem to use devm-based resource management, from Benjamin Tissoires - i2c-hid support for DT bindings, from Benjamin Tissoires - much improved support for Win8-multitouch devices, from Benjamin Tissoires - cleanup of core code using common hidinput_input_event(), from David Herrmann - fix for bug in implement() access to the bit stream (causing oops) that has been present in the code for ages, but devices that are able to trigger it have started to appear only now, from Jiri Kosina - fixes for CVE-2013-2899, CVE-2013-2898, CVE-2013-2896, CVE-2013-2892, CVE-2013-2888 (all triggerable only by specially crafted malicious HW devices plugged into the system), from Kees Cook - hidraw oops fix, from Manoj Chourasia - various smaller fixes here and there, support for a bunch of new devices by various contributors" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (53 commits) HID: MAINTAINERS: add roccat drivers HID: hid-sensor-hub: change kmalloc + memcpy by kmemdup HID: hid-sensor-hub: move to devm_kzalloc HID: hid-sensor-hub: fix indentation accross the code HID: move HID_REPORT_TYPES closer to the report-definitions HID: check for NULL field when setting values HID: picolcd_core: validate output report details HID: sensor-hub: validate feature report details HID: ntrig: validate feature report details HID: pantherlord: validate output report details HID: hid-wiimote: print small buffers via %*phC HID: uhid: improve uhid example client HID: Correct the USB IDs for the new Macbook Air 6 HID: wiimote: add support for Guitar-Hero guitars HID: wiimote: add support for Guitar-Hero drums Input: introduce BTN/ABS bits for drums and guitars HID: battery: don't do DMA from stack HID: roccat: add support for KonePureOptical v2 HID: picolcd: Prevent NULL pointer dereference on _remove() HID: usbhid: quirk for N-Trig DuoSense Touch Screen ...
2013-09-04Merge branch 'master' into for-3.12/upstreamJiri Kosina
Sync with Linus' tree to be able to apply fixup patch on top of 9d9a04ee75 ("HID: apple: Add support for the 2013 Macbook Air") Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-07-25Bluetooth: hidp: remove wrong send_report at initBenjamin Tissoires
The USB hid implementation does retrieve the reports during the start. However, this implementation does not call the HID command GET_REPORT (which would fetch the current status of each report), but use the DATA command, which is an Output Report (so transmitting data from the host to the device). The Wiimote controller is already guarded against this problem in the protocol, but it is not conformant to the specification to set all the reports to 0 on start. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-07-25Bluetooth: hidp: implement hidinput_input_event callbackBenjamin Tissoires
We can re-enable hidinput_input_event to allow the leds of bluetooth keyboards to be set. Now the callbacks uses hid core to retrieve the right HID report to send, so this version is safer. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-07-22HID: fix unused rsize usageJiri Kosina
27ce4050 ("HID: fix data access in implement()") by mistake removed a setting of buffer size in hidp. Fix that by putting it back. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-07-22HID: fix data access in implement()Jiri Kosina
implement() is setting bytes in LE data stream. In case the data is not aligned to 64bits, it reads past the allocated buffer. It doesn't really change any value there (it's properly bitmasked), but in case that this read past the boundary hits a page boundary, pagefault happens when accessing 64bits of 'x' in implement(), and kernel oopses. This happens much more often when numbered reports are in use, as the initial 8bit skip in the buffer makes the whole process work on values which are not aligned to 64bits. This problem dates back to attempts in 2005 and 2006 to make implement() and extract() as generic as possible, and even back then the problem was realized by Adam Kroperlin, but falsely assumed to be impossible to cause any harm: http://www.mail-archive.com/linux-usb-devel@lists.sourceforge.net/msg47690.html I have made several attempts at fixing it "on the spot" directly in implement(), but the results were horrible; the special casing for processing last 64bit chunk and switching to different math makes it unreadable mess. I therefore took a path to allocate a few bytes more which will never make it into final report, but are there as a cushion for all the 64bit math operations happening in implement() and extract(). All callers of hid_output_report() are converted at the same time to allocate the buffer by newly introduced hid_alloc_report_buf() helper. Bruno noticed that the whole raw_size test can be dropped as well, as hid_alloc_report_buf() makes sure that the buffer is always of a proper size. Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-07-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "This is a re-do of the net-next pull request for the current merge window. The only difference from the one I made the other day is that this has Eliezer's interface renames and the timeout handling changes made based upon your feedback, as well as a few bug fixes that have trickeled in. Highlights: 1) Low latency device polling, eliminating the cost of interrupt handling and context switches. Allows direct polling of a network device from socket operations, such as recvmsg() and poll(). Currently ixgbe, mlx4, and bnx2x support this feature. Full high level description, performance numbers, and design in commit 0a4db187a999 ("Merge branch 'll_poll'") From Eliezer Tamir. 2) With the routing cache removed, ip_check_mc_rcu() gets exercised more than ever before in the case where we have lots of multicast addresses. Use a hash table instead of a simple linked list, from Eric Dumazet. 3) Add driver for Atheros CQA98xx 802.11ac wireless devices, from Bartosz Markowski, Janusz Dziedzic, Kalle Valo, Marek Kwaczynski, Marek Puzyniak, Michal Kazior, and Sujith Manoharan. 4) Support reporting the TUN device persist flag to userspace, from Pavel Emelyanov. 5) Allow controlling network device VF link state using netlink, from Rony Efraim. 6) Support GRE tunneling in openvswitch, from Pravin B Shelar. 7) Adjust SOCK_MIN_RCVBUF and SOCK_MIN_SNDBUF for modern times, from Daniel Borkmann and Eric Dumazet. 8) Allow controlling of TCP quickack behavior on a per-route basis, from Cong Wang. 9) Several bug fixes and improvements to vxlan from Stephen Hemminger, Pravin B Shelar, and Mike Rapoport. In particular, support receiving on multiple UDP ports. 10) Major cleanups, particular in the area of debugging and cookie lifetime handline, to the SCTP protocol code. From Daniel Borkmann. 11) Allow packets to cross network namespaces when traversing tunnel devices. From Nicolas Dichtel. 12) Allow monitoring netlink traffic via AF_PACKET sockets, in a manner akin to how we monitor real network traffic via ptype_all. From Daniel Borkmann. 13) Several bug fixes and improvements for the new alx device driver, from Johannes Berg. 14) Fix scalability issues in the netem packet scheduler's time queue, by using an rbtree. From Eric Dumazet. 15) Several bug fixes in TCP loss recovery handling, from Yuchung Cheng. 16) Add support for GSO segmentation of MPLS packets, from Simon Horman. 17) Make network notifiers have a real data type for the opaque pointer that's passed into them. Use this to properly handle network device flag changes in arp_netdev_event(). From Jiri Pirko and Timo Teräs. 18) Convert several drivers over to module_pci_driver(), from Peter Huewe. 19) tcp_fixup_rcvbuf() can loop 500 times over loopback, just use a O(1) calculation instead. From Eric Dumazet. 20) Support setting of explicit tunnel peer addresses in ipv6, just like ipv4. From Nicolas Dichtel. 21) Protect x86 BPF JIT against spraying attacks, from Eric Dumazet. 22) Prevent a single high rate flow from overruning an individual cpu during RX packet processing via selective flow shedding. From Willem de Bruijn. 23) Don't use spinlocks in TCP md5 signing fast paths, from Eric Dumazet. 24) Don't just drop GSO packets which are above the TBF scheduler's burst limit, chop them up so they are in-bounds instead. Also from Eric Dumazet. 25) VLAN offloads are missed when configured on top of a bridge, fix from Vlad Yasevich. 26) Support IPV6 in ping sockets. From Lorenzo Colitti. 27) Receive flow steering targets should be updated at poll() time too, from David Majnemer. 28) Fix several corner case regressions in PMTU/redirect handling due to the routing cache removal, from Timo Teräs. 29) We have to be mindful of ipv4 mapped ipv6 sockets in upd_v6_push_pending_frames(). From Hannes Frederic Sowa. 30) Fix L2TP sequence number handling bugs, from James Chapman." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1214 commits) drivers/net: caif: fix wrong rtnl_is_locked() usage drivers/net: enic: release rtnl_lock on error-path vhost-net: fix use-after-free in vhost_net_flush net: mv643xx_eth: do not use port number as platform device id net: sctp: confirm route during forward progress virtio_net: fix race in RX VQ processing virtio: support unlocked queue poll net/cadence/macb: fix bug/typo in extracting gem_irq_read_clear bit Documentation: Fix references to defunct linux-net@vger.kernel.org net/fs: change busy poll time accounting net: rename low latency sockets functions to busy poll bridge: fix some kernel warning in multicast timer sfc: Fix memory leak when discarding scattered packets sit: fix tunnel update via netlink dt:net:stmmac: Add dt specific phy reset callback support. dt:net:stmmac: Add support to dwmac version 3.610 and 3.710 dt:net:stmmac: Allocate platform data only if its NULL. net:stmmac: fix memleak in the open method ipv6: rt6_check_neigh should successfully verify neigh if no NUD information are available net: ipv6: fix wrong ping_v6_sendmsg return value ...
2013-06-23Bluetooth: hidp: using strlcpy instead of strncpy, also beautify code.Chen Gang
For NULL terminated string, need always let it ended by zero. Since have already called memcpy() to initialize 'ci', so need not redundant initialization. Better use ''if(session->hid) {} else if(session->input) {}"" instead of ''if(session->hid) {}; if(session->input) {};'' Signed-off-by: Chen Gang <gang.chen@asianux.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-05-29HID: Bluetooth: hidp: register HID devices asyncDavid Herrmann
While l2cap_user callbacks are running, the whole hci_dev is locked. Even if we would add more fine-grained locking to HCI core, it would still be called from the non-reentrant rx work-queue and thus block the event processing. However, if we want to perform synchronous I/O during HID device registration (eg., to perform device-detection), we need the HCI core to be able to dispatch incoming data. Therefore, we now move device-registration to a separate worker. The HCI core can continue running and we add devices asynchronously in another kernel thread. Device removal is synchronized and waits for the worker to exit before calling the usual device removal functions. If l2cap_user->remove is called before the thread registered the devices, we set "terminate" to true and the thread will skip it. If l2cap_user->remove is called after it, we notice this as the device is no longer in HIDP_SESSION_PREPARING state and simply unregister the device as we did before. There is no new deadlock as we now call hidp_session_add_dev() with one lock less held (the HCI lock) and it cannot itself call back into HCI as it was called with the HCI-lock held before. One might wonder whether this can block during device unregistration. But we set "terminate" to true and wake the HIDP thread up _before_ unregistering the HID/input devices. Therefore, all pending HID I/O operations are canceled. All further I/O attempts will fail with ENODEV or EIO. So all latency we can get are few context-switches, but no timeouts or blocking I/O waits! This change also prepares for a long standing HID bug. All HID devices that register power_supply devices need to be able to handle callbacks during registration (a power_supply oddity that cannot easily be fixed). So with this patch available, we can allow HID I/O during registration by calling the recently introduced hid_device_io_start/stop helpers, which currently are a no-op for bluetooth due to this locking. Note that we cannot do the same for input devices. input-core doesn't allow us to call input_event() asynchronously to input_register_device(), which HID-core kindly allows (for good reasons). Fixing input-core to allow this isn't as easy as it sounds and is, beside simplifying HIDP, not really an improvement. Hence, we still register input devices synchronously as we did before. Only HID devices are registered asynchronously. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Tested-by: Daniel Nicoletti <dantti12@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-05-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS updates from Al Viro, Misc cleanups all over the place, mainly wrt /proc interfaces (switch create_proc_entry to proc_create(), get rid of the deprecated create_proc_read_entry() in favor of using proc_create_data() and seq_file etc). 7kloc removed. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits) don't bother with deferred freeing of fdtables proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h proc: Make the PROC_I() and PDE() macros internal to procfs proc: Supply a function to remove a proc entry by PDE take cgroup_open() and cpuset_open() to fs/proc/base.c ppc: Clean up scanlog ppc: Clean up rtas_flash driver somewhat hostap: proc: Use remove_proc_subtree() drm: proc: Use remove_proc_subtree() drm: proc: Use minor->index to label things, not PDE->name drm: Constify drm_proc_list[] zoran: Don't print proc_dir_entry data in debug reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show() proc: Supply an accessor for getting the data from a PDE's parent airo: Use remove_proc_subtree() rtl8192u: Don't need to save device proc dir PDE rtl8187se: Use a dir under /proc/net/r8180/ proc: Add proc_mkdir_data() proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h} proc: Move PDE_NET() to fs/proc/proc_net.c ...
2013-04-17Bluetooth: hidp: fix sending output reports on intr channelDavid Herrmann
According to the specifications, data output reports must be sent on the interrupt channel. See also usbhid implementation. Sending these reports on the control channel breaks newer Wii Remotes. Note that this will make output reports asynchronous. However, that's how hid_output_raw_report() is supposed to work with HID_OUTPUT_REPORT as report type. There are no responses to output reports. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-17Bluetooth: hidp: don't send boot-protocol messages as HID-reportsDavid Herrmann
If a device is registered as HID device, it is always in Report-Mode. Therefore, we must not send Boot-Protocol messages on hidinput_input_event() callbacks. This confuses devices and may cause disconnects on protocol errors. We disable the hidinput_input_event() callback for now. We can implement it properly later, but lets first fix the current code by disabling it. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-17Bluetooth: hidp: merge 'send' functions into hidp_send_message()David Herrmann
We handle skb buffers all over the place, even though we have hidp_send_*_message() helpers. This creates a more generic hidp_send_message() helper and uses it instead of dealing with transmit queues directly everywhere. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-17Bluetooth: hidp: merge hidp_process_{ctrl,intr}_transmit()David Herrmann
Both hidp_process_ctrl_transmit() and hidp_process_intr_transmit() are exactly the same apart from the transmit-queue and socket pointers. Therefore, pass them as argument and merge both functions into one so we avoid 25 lines of code-duplication. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-17Bluetooth: hidp: handle kernel_sendmsg() errors correctlyDavid Herrmann
We shouldn't push back the skbs if kernel_sendmsg() fails. Instead, we terminate the connection and drop the skb. Only on EAGAIN we push it back and return. l2cap doesn't return EAGAIN, yet, but this guarantees we're safe if it will at some time in the future. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-17Bluetooth: hidp: remove old session-managementDavid Herrmann
We have the full new session-management now available so lets switch over and remove all the old code. Few semantics changed, so we need to adjust the sock.c callers a bit. But this mostly simplifies the logic. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-17Bluetooth: hidp: add new session-management helpersDavid Herrmann
This is a rewrite of the HIDP session management. It implements HIDP as an l2cap_user sub-module so we get proper notification when the underlying connection goes away. The helpers are not yet used but only added in this commit. The old session management is still used and will be removed in a following patch. The old session-management was flawed. Hotplugging is horribly broken and we have no way of getting notified when the underlying connection goes down. The whole idea of removing the HID/input sub-devices from within the session itself is broken and suffers from major dead-locks. We never can guarantee that the session can unregister itself as long as we use synchronous shutdowns. This can only work with asynchronous shutdowns. However, in this case we _must_ be able to unregister the session from the outside as otherwise the l2cap_conn object might be unlinked before we are. The new session-management is based on l2cap_user. There is only one way how to add a session and how to delete a session: "probe" and "remove" callbacks from l2cap_user. This guarantees that the session can be registered and unregistered at _any_ time without any synchronous shutdown. On the other hand, much work has been put into proper session-refcounting. We can unregister/unlink the session only if we can guarantee that it will stay alive. But for asynchronous shutdowns we never know when the last user goes away so we must use proper ref-counting. The old ->conn field has been renamed to ->hconn so we can reuse ->conn in the new session management. No other existing HIDP code is modified. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-17Bluetooth: hidp: move hidp_schedule() to core.cDavid Herrmann
There is no reason to keep this helper in the header file. No other file depends on it so move it into hidp/core.c where it belongs. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-17Bluetooth: hidp: test "terminate" before sleepingDavid Herrmann
The "terminate" flag is guaranteed to be set before the session terminates and the handlers are woken up. Hence, we need to add it to the sleep-condition. Note that testing the flags is not enough as nothing prevents us from setting the flags again after the session-handler terminated. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-17Bluetooth: hidp: remove unused session->state fieldDavid Herrmann
This field is always BT_CONNECTED. Remove it and set it to BT_CONNECTED in hidp_copy_session() unconditionally. Also note that this field is totally bogus. Userspace can query an hidp-session for its state. However, whenever user-space queries us, this field should be BT_CONNECTED. If it wasn't BT_CONNECTED, then we would be currently cleaning up the session and the session itself would exit in the next few milliseconds. Hence, there is no reason to let user-space know that the session will exit now if they cannot make _any_ use of that. Thus, remove the field and let user-space think that a session is always BT_CONNECTED as long as they can query it. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-17Bluetooth: remove unneeded hci_conn_hold/put_device()David Herrmann
hci_conn_hold/put_device() is used to control when hci_conn->dev is no longer needed and can be deleted from the system. Lets first look how they are currently used throughout the code (excluding HIDP!). All code that uses hci_conn_hold_device() looks like this: ... hci_conn_hold_device(); hci_conn_add_sysfs(); ... On the other side, hci_conn_put_device() is exclusively used in hci_conn_del(). So, considering that hci_conn_del() must not be called twice (which would fail horribly), we know that hci_conn_put_device() is only called _once_ (which is in hci_conn_del()). On the other hand, hci_conn_add_sysfs() must not be called twice, either (it would call device_add twice, which breaks the device, see drivers/base/core.c). So we know that hci_conn_hold_device() is also called only once (it's only called directly before hci_conn_add_sysfs()). So hold and put are known to be called only once. That means we can safely remove them and directly call hci_conn_del_sysfs() in hci_conn_del(). But there is one issue left: HIDP also uses hci_conn_hold/put_device(). However, this case can be ignored and simply removed as it is totally broken. The issue is, the only thing HIDP delays with hci_conn_hold_device() is the removal of the hci_conn->dev from sysfs. But, the hci_conn device has no mechanism to get notified when its own parent (hci_dev) gets removed from sysfs. hci_dev_hold/put() does _not_ control when it is removed but only when the device object is created and destroyed. And hci_dev calls hci_conn_flush_*() when it removes itself from sysfs, which itself causes hci_conn_del() to be called, but it does _not_ cause hci_conn_del_sysfs() to be called, which is wrong. Hence, we fix it to call hci_conn_del_sysfs() in hci_conn_del(). This guarantees that a hci_conn object is removed from sysfs _before_ its parent hci_dev is removed. The changes to HIDP look scary, wrong and broken. However, if you look at the HIDP session management, you will notice they're already broken in the exact _same_ way (ever tried "unplugging" HIDP devices? Breaks _all_ the time). So this patch only makes HIDP look _scary_ and _obviously broken_. It does not break HIDP itself, it already is! See later patches in this series which fix HIDP to use proper session-management. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-09bluetooth: kill unused 'module' argument of bt_procfs_init()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-05Bluetooth: hidp: verify l2cap socketsDavid Herrmann
We need to verify that the given sockets actually are l2cap sockets. If they aren't, we are not supposed to access bt_sk(sock) and we shouldn't start the session if the offsets turn out to be valid local BT addresses. That is, if someone passes a TCP socket to HIDCONNADD, then we access some random offset in the TCP socket (which isn't even guaranteed to be valid). Fix this by checking that the socket is an l2cap socket. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-05Bluetooth: hidp: remove redundant error messageDavid Herrmann
We print this error twice in the first error-path so remove it. One error message is enough. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-03-08Bluetooth: discard bt_sock_unregister() errorsDavid Herrmann
After we successfully registered a socket via bt_sock_register() there is no reason to ever check the return code of bt_sock_unregister(). If bt_sock_unregister() fails, it means the socket _is_ already unregistered so we have what we want, don't we? Also, to get bt_sock_unregister() to fail, another part of the kernel has to unregister _our_ socket. This is sooo _wrong_ that it will break way earlier than when we unregister our socket. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-03-08Bluetooth: Make hidp_get_raw_report abort if the session is terminatingKarl Relton
After linux 3.2 the hid_destroy_device call in hidp_session cleaning up invokes a hook to the power_supply code which in turn tries to read the battery capacity. This read will trigger a call to hidp_get_raw_report which is bound to fail because the device is being taken away - so rather than wait for the 5 second timeout failure this changes enables it to fail straight away. Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-09Bluetooth: Fix incorrect strncpy() in hidp_setup_hid()Anderson Lizardo
The length parameter should be sizeof(req->name) - 1 because there is no guarantee that string provided by userspace will contain the trailing '\0'. Can be easily reproduced by manually setting req->name to 128 non-zero bytes prior to ioctl(HIDPCONNADD) and checking the device name setup on input subsystem: $ cat /sys/devices/pnp0/00\:04/tty/ttyS0/hci0/hci0\:1/input8/name AAAAAA[...]AAAAAAAAf0:af:f0:af:f0:af ("f0:af:f0:af:f0:af" is the device bluetooth address, taken from "phys" field in struct hid_device due to overflow.) Cc: stable@vger.kernel.org Signed-off-by: Anderson Lizardo <anderson.lizardo@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-12-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID subsystem updates from Jiri Kosina: 1) Support for HID over I2C bus has been added by Benjamin Tissoires. ACPI device discovery is still in the works. 2) Support for Win8 Multitiouch protocol is being added, most work done by Benjamin Tissoires as well 3) EIO/ERESTARTSYS is fixed in hiddev/hidraw, fixes by Andrew Duggan and Jiri Kosina 4) ION iCade driver added by Bastien Nocera 5) Support for a couple new Roccat devices has been added by Stefan Achatz 6) HID sensor hubs are now auto-detected instead of having to list all the VID/PID combinations in the blacklist array 7) other random fixes and support for new device IDs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (65 commits) HID: i2c-hid: add mutex protecting open/close race Revert "HID: sensors: add to special driver list" HID: sensors: autodetect USB HID sensor hubs HID: hidp: fallback to input session properly if hid is blacklisted HID: i2c-hid: fix ret_count check HID: i2c-hid: fix i2c_hid_get_raw_report count mismatches HID: i2c-hid: remove extra .irq field in struct i2c_hid HID: i2c-hid: reorder allocation/free of buffers HID: i2c-hid: fix memory corruption due to missing hid declaration HID: i2c-hid: remove superfluous include HID: i2c-hid: remove unneeded test in i2c_hid_remove HID: i2c-hid: i2c_hid_get_report may fail HID: i2c-hid: also call i2c_hid_free_buffers in i2c_hid_remove HID: i2c-hid: fix error messages HID: i2c-hid: fix return paths HID: i2c-hid: remove unused static declarations HID: i2c-hid: fix i2c_hid_dbg macro HID: i2c-hid: fix checkpatch.pl warning HID: i2c-hid: enhance Kconfig HID: i2c-hid: change I2C name ...
2012-12-12Merge branches 'for-3.7/upstream-fixes', 'for-3.8/hidraw', ↵Jiri Kosina
'for-3.8/i2c-hid', 'for-3.8/multitouch', 'for-3.8/roccat', 'for-3.8/sensors' and 'for-3.8/upstream' into for-linus Conflicts: drivers/hid/hid-core.c
2012-12-07HID: hidp: fallback to input session properly if hid is blacklistedLamarque V. Souza
This patch against kernel 3.7.0-rc8 fixes a kernel oops when turning on the bluetooth mouse with id 0458:0058 [1]. The mouse in question supports both input and hid sessions, however it is blacklisted in drivers/hid/hid-core.c so the input session is one that should be used. Long ago (around kernel 3.0.0) some changes in the bluetooth subsystem made the kernel do not fallback to input session when hid session is not supported or blacklisted. This patch restore that behaviour by making the kernel try the input session if hid_add_device returns ENODEV. The patch exports hid_ignore() from hid-core.c so that it can be used in the bluetooth subsystem. [1] https://bugzilla.kernel.org/show_bug.cgi?id=39882 Signed-off-by: Lamarque V. Souza <lamarque@gmail.com> Acked-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-19Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
2012-09-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/team/team.c drivers/net/usb/qmi_wwan.c net/batman-adv/bat_iv_ogm.c net/ipv4/fib_frontend.c net/ipv4/route.c net/l2tp/l2tp_netlink.c The team, fib_frontend, route, and l2tp_netlink conflicts were simply overlapping changes. qmi_wwan and bat_iv_ogm were of the "use HEAD" variety. With help from Antonio Quartulli. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27Bluetooth: Use %pMR in sprintf/seq_printf instead of batostrAndrei Emeltchenko
Instead of old unsafe batostr function use %pMR print specifier for printing Bluetooth addresses in sprintf and seq_printf statements. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-21net: change return values from -EACCES to -EPERMZhao Hongjiang
Change return value from -EACCES to -EPERM when the permission check fails. Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-06Bluetooth: Added /proc/net/hidp via bt_procfs_init()Masatake YAMATO
Added /proc/net/hidp via bt_procfs_init(). Signed-off-by: Masatake YAMATO <yamato@redhat.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/caif/caif_hsi.c drivers/net/usb/qmi_wwan.c The qmi_wwan merge was trivial. The caif_hsi.c, on the other hand, was not. It's a conflict between 1c385f1fdf6f9c66d982802cd74349c040980b50 ("caif-hsi: Replace platform device with ops structure.") in the net-next tree and commit 39abbaef19cd0a30be93794aa4773c779c3eb1f3 ("caif-hsi: Postpone init of HIS until open()") in the net tree. I did my best with that one and will ask Sjur to check it out. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-25HID: Fix the generic Kconfig optionsHenrik Rydberg
The generic HID driver is obviously not a special driver, so move it outside of the special drivers menu. Explain the usage and make the default follow the HID setting. This should simplify migration from older kernels. While at it, remove the redundant HID_SUPPORT option and modify the HID and USB_HID entries to better explain the bus structure. Reported-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-06-09Bluetooth: Fix style in hidp codeGustavo Padovan
Follow the net rules. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Remove unnecessary headers includeGustavo Padovan
Most of the include were unnecessary or already included by some other header. Replace module.h by export.h where possible. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Remove most of the inline usageGustavo Padovan
Only obvious cases were left as inline, mostly oneline functions. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-05-01HID: Create a common generic driverHenrik Rydberg
Move the hid drivers of the bus drivers to a common generic hid driver, and make it a proper module. This ought to simplify device handling moving forward. Cc: Gustavo Padovan <gustavo@padovan.org> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-01HID: Create a generic device groupHenrik Rydberg
Devices that do not have a special driver are handled by the generic driver. This patch does the same thing using device groups; Instead of forcing a particular driver, the appropriate driver is picked up by udev. As a consequence, one can now move a device from generic to specific handling by a simple rebind. By adding a new device id to the generic driver, the same thing can be done in reverse. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-27Bluetooth: Use kernel int types instead of ones from stdint.hJohan Hedberg
u8/__u8/u32/etc should be used in the kernel instead of stdint.h types. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2011-12-21Bluetooth: Always compile SCO and L2CAP in Bluetooth CoreUlisses Furquim
The handling of SCO audio links and the L2CAP protocol are essential to any system with Bluetooth thus are always compiled in from now on. Signed-off-by: Ulisses Furquim <ulisses@profusion.mobi> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Replace spin_lock by mutex in hci_devGustavo F. Padovan
Now we run everything in HCI in process context, so it's a better idea use mutex instead spin_lock. The macro remains hci_dev_lock() (and I got rid of hci_dev_lock_bh()), of course. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-07Bluetooth: Fix hidp_get_connection()Gustavo F. Padovan
This functions needs crtl_sock and intr_sock to be set first. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-07Bluetooth: hidp: Fix module reference cleanupDavid Herrmann
Calling module_put(THIS_MODULE) is *never* safe when we cannot go sure that we own at least two references. This is because the call may unload our module before it returns and then the "return" will jump into invalid memory. Gladly, module.h provides a wrapper for kthread-users: module_put_and_exit(). This puts our module and then exits the kthread without returning to the module. This patch fixes the hidp kthread to use this wrapper instead of manually freeing its own reference. See nfsd or lockd for other kthreads using this. Calling __module_get() inside the kthread is safe as the hidp module will always wait until the kthread sets "waiting_for_startup" to 0. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>