summaryrefslogtreecommitdiffstats
path: root/net/bluetooth/l2cap_core.c
AgeCommit message (Collapse)Author
2012-02-17Bluetooth: Prefix hex numbers with object nameAndrei Emeltchenko
Several hex numbers were printed without object name which complicates debugging. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-17Bluetooth: Use symbolic names for state in debugAndrei Emeltchenko
Use state_to_string function in debug statements. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-17Bluetooth: Move scope of state_to_stringAndrei Emeltchenko
Function state_to_string will be used in other files in debug statements. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Fix double acking I-Frames when sending pending I-FramesSzymon Janc
Pending I-Frame(s) are considered as acknowledgement. To void double acking (via I-Frame and later via RR) clear ack timer when sending first pending I-Frame. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Fix possible missing I-Frame acknowledgementSzymon Janc
Make l2cap_ertm_send return number of pending I-Frames transmitted instead of all (pending + retransmitted) I-Frames transmitted. As only pending I-Frames are considered as acknowledgement, this could lead to situation when no ACK was sent in __l2cap_send_ack (if only already transmitted I-Frames were retransmitted). Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Remove unneeded sk variableAndrei Emeltchenko
In debug use chan %p instead of sk. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Clean up l2cap_chan_addAndrei Emeltchenko
Change elseif to switch. This make sense even more with following patches which otherwise have to add more elseifs statements. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Change chan_ready param from sk to chanAndrei Emeltchenko
Change is needed to remove dependency on sk when possible before introducing l2cap channel lock. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Fix possible use after free in delete pathUlisses Furquim
We need to use the _sync() version for cancelling the info and security timer in the L2CAP connection delete path. Otherwise the delayed work handler might run after the connection object is freed. Signed-off-by: Ulisses Furquim <ulisses@profusion.mobi> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Remove usage of __cancel_delayed_work()Ulisses Furquim
__cancel_delayed_work() is being used in some paths where we cannot sleep waiting for the delayed work to finish. However, that function might return while the timer is running and the work will be queued again. Replace the calls with safer cancel_delayed_work() version which spins until the timer handler finishes on other CPUs and cancels the delayed work. Signed-off-by: Ulisses Furquim <ulisses@profusion.mobi> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Make l2cap_ertm_data_rcv staticSzymon Janc
It is not used outside of l2cap_core.c. Also l2cap_ertm_data_rcv is only used after it is defined so there is no need for forward declaration. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Add alloc_skb chan operatorAndrei Emeltchenko
Add channel-specific skb allocation method Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: trivial: space correctionAndrei Emeltchenko
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Rename conn->pend to conn->flagsJohan Hedberg
These flags can and will be used for more general purpose values than just pending state transitions so the more common name "flags" makes more sense than "pend". Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-13Bluetooth: Change sk to l2cap_chanAndrei Emeltchenko
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Use chan instead of skAndrei Emeltchenko
Remove unneeded conversion from sk to chan. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Drop L2CAP chan reference if ERTM ack_timer firedSzymon Janc
Reference counter was incremented when starting ack timer but decremented only when clearing timer, not when timer fired. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Don't send RNR immediately when entering local busySzymon Janc
There is no need to send RNR immediately when entring local busy. Also upper layer might clear local busy condition before ack timer expires saving few cycles for sending RNR. This also prevents sending two RNRs in some cases where sending one would be enough i.e received N I-frame can trigger local busy (sending RNR acking up to N-1 I-frame) and later sending ack (RNR acking up to N I-frame). This was affecting TC_ERM_BV_07_C and TC_ERM_BV_22_C with some non default channel parameters (tx window and receiving buffer sizes). Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Clear ack_timer when sending ackSzymon Janc
ack_timer should be cleared when sending ACK to avoid acking I-frames twice. This commit introduces helper function (only send ack, not clearing timer) which is used by l2cap_send_ack and l2cap_ack_timeout. This is to avoid clearing ack timer in timer function. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Set P-bit for SREJ frame only if there are I-frames to ackSzymon Janc
SREJ frame with P-bit set acknowledges I-frames numbered up to (ReqSeq - 1). With this patch P-bit in SREJ is set only when there are some I-frames to ack. This fixes ambiguous situation when lost of I-frame with TxSeq=0 would result in sending SREJ acking all previous I-frames. Consider following scenario: TxWindow=3 HostA: sent I-frame TxSeq=0 HostA: sent I-frame TxSeq=1 HostA: sent I-frame TxSeq=2 HostB: missed I-frame TxSeq=0 HostB: received I-frame TxSeq=1 HostB: sent SREJ ReqSeq=0 Pbit=1 HostA: received SREJ ReqSeq=0 Pbit=1 <- All I-frames acked or not? ... Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Remove bogus inline declaration from l2cap_chan_connectJohan Hedberg
As reported by Dan Carpenter this function causes a Sparse warning and shouldn't be declared inline: include/net/bluetooth/l2cap.h:837:30 error: marked inline, but without a definition" Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-13Bluetooth: l2cap_set_timer needs jiffies as timeout valueAndrzej Kaczmarek
After moving L2CAP timers to workqueues l2cap_set_timer expects timeout value to be specified in jiffies but constants defined in miliseconds are used. This makes timeouts unreliable when CONFIG_HZ is not set to 1000. __set_chan_timer macro still uses jiffies as input to avoid multiple conversions from/to jiffies for sk_sndtimeo value which is already specified in jiffies. Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com> Ackec-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-01-10Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-next
2012-01-03Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/b43/dma.c drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
2012-01-03Bluetooth: Don't use *_bh locks anymoreGustavo F. Padovan
Those locks are not shared between interrupt and process context anymore, so remove the part that disable interrupts. We are still safe because preemption is disabled. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2012-01-02Bluetooth: Fix bacpy in l2cap_core.cGustavo F. Padovan
It should be the dst in the copy not src. 03a001948 introduced this bug. Reported-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: net/bluetooth/l2cap_core.c Just two overlapping changes, one added an initialization of a local variable, and another change added a new local variable. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-22Bluetooth: add debug output to l2cap_ack_timeout()Gustavo F. Padovan
Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-22Bluetooth: Fix deadlocks with sock lock and L2CAP timers locksUlisses Furquim
When cancelling a delayed work (timer) in L2CAP we can not sleep holding the sock mutex otherwise we might deadlock with an L2CAP timer handler. This is possible because RX/TX and L2CAP timers run in different workqueues. The scenario below illustrates the problem. Thus we are now avoiding to sleep on the timers locks. ====================================================== [ INFO: possible circular locking dependency detected ] 3.1.0-05270-ga978dc7-dirty #239 ------------------------------------------------------- kworker/1:1/873 is trying to acquire lock: (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+...}, at: [<ffffffffa002ceac>] l2cap_chan_timeout+0x3c/0xe0 [bluetooth] but task is already holding lock: ((&(&chan->chan_timer)->work)){+.+...}, at: [<ffffffff81051a86>] process_one_work+0x126/0x450 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 ((&(&chan->chan_timer)->work)){+.+...}: [<ffffffff8106b276>] check_prevs_add+0xf6/0x170 [<ffffffff8106b903>] validate_chain+0x613/0x790 [<ffffffff8106dfee>] __lock_acquire+0x4be/0xac0 [<ffffffff8106ec2d>] lock_acquire+0x8d/0xb0 [<ffffffff81052a6f>] wait_on_work+0x4f/0x160 [<ffffffff81052ca3>] __cancel_work_timer+0x73/0x80 [<ffffffff81052cbd>] cancel_delayed_work_sync+0xd/0x10 [<ffffffffa002f2ed>] l2cap_chan_connect+0x22d/0x470 [bluetooth] [<ffffffffa002fb51>] l2cap_sock_connect+0xb1/0x140 [bluetooth] [<ffffffff8130811b>] kernel_connect+0xb/0x10 [<ffffffffa00cf98a>] rfcomm_session_create+0x12a/0x1c0 [rfcomm] [<ffffffffa00cfbe7>] __rfcomm_dlc_open+0x1c7/0x240 [rfcomm] [<ffffffffa00d07c2>] rfcomm_dlc_open+0x42/0x70 [rfcomm] [<ffffffffa00d3b03>] rfcomm_sock_connect+0x103/0x150 [rfcomm] [<ffffffff8130bd7e>] sys_connect+0xae/0xc0 [<ffffffff813368d2>] compat_sys_socketcall+0xb2/0x220 [<ffffffff813b2089>] sysenter_dispatch+0x7/0x30 -> #0 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+...}: [<ffffffff8106b16d>] check_prev_add+0x6cd/0x6e0 [<ffffffff8106b276>] check_prevs_add+0xf6/0x170 [<ffffffff8106b903>] validate_chain+0x613/0x790 [<ffffffff8106dfee>] __lock_acquire+0x4be/0xac0 [<ffffffff8106ec2d>] lock_acquire+0x8d/0xb0 [<ffffffff8130d91a>] lock_sock_nested+0x8a/0xa0 [<ffffffffa002ceac>] l2cap_chan_timeout+0x3c/0xe0 [bluetooth] [<ffffffff81051ae4>] process_one_work+0x184/0x450 [<ffffffff8105276e>] worker_thread+0x15e/0x340 [<ffffffff81057bb6>] kthread+0x96/0xa0 [<ffffffff813b1ef4>] kernel_thread_helper+0x4/0x10 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((&(&chan->chan_timer)->work)); lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); lock((&(&chan->chan_timer)->work)); lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); *** DEADLOCK *** 2 locks held by kworker/1:1/873: #0: (events){.+.+.+}, at: [<ffffffff81051a86>] process_one_work+0x126/0x450 #1: ((&(&chan->chan_timer)->work)){+.+...}, at: [<ffffffff81051a86>] process_one_work+0x126/0x450 stack backtrace: Pid: 873, comm: kworker/1:1 Not tainted 3.1.0-05270-ga978dc7-dirty #239 Call Trace: [<ffffffff813a0f6e>] print_circular_bug+0xd2/0xe3 [<ffffffff8106b16d>] check_prev_add+0x6cd/0x6e0 [<ffffffff8106b276>] check_prevs_add+0xf6/0x170 [<ffffffff8106b903>] validate_chain+0x613/0x790 [<ffffffff8106dfee>] __lock_acquire+0x4be/0xac0 [<ffffffff8130d8f6>] ? lock_sock_nested+0x66/0xa0 [<ffffffff8106ea30>] ? lock_release_nested+0x100/0x110 [<ffffffff8130d8f6>] ? lock_sock_nested+0x66/0xa0 [<ffffffff8106ec2d>] lock_acquire+0x8d/0xb0 [<ffffffffa002ceac>] ? l2cap_chan_timeout+0x3c/0xe0 [bluetooth] [<ffffffff8130d91a>] lock_sock_nested+0x8a/0xa0 [<ffffffffa002ceac>] ? l2cap_chan_timeout+0x3c/0xe0 [bluetooth] [<ffffffff81051a86>] ? process_one_work+0x126/0x450 [<ffffffffa002ceac>] l2cap_chan_timeout+0x3c/0xe0 [bluetooth] [<ffffffff81051ae4>] process_one_work+0x184/0x450 [<ffffffff81051a86>] ? process_one_work+0x126/0x450 [<ffffffffa002ce70>] ? l2cap_security_cfm+0x4e0/0x4e0 [bluetooth] [<ffffffff8105276e>] worker_thread+0x15e/0x340 [<ffffffff81052610>] ? manage_workers+0x110/0x110 [<ffffffff81057bb6>] kthread+0x96/0xa0 [<ffffffff813b1ef4>] kernel_thread_helper+0x4/0x10 [<ffffffff813af69d>] ? retint_restore_args+0xe/0xe [<ffffffff81057b20>] ? __init_kthread_worker+0x70/0x70 [<ffffffff813b1ef0>] ? gs_change+0xb/0xb Signed-off-by: Ulisses Furquim <ulisses@profusion.mobi> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-22Bluetooth: Make HCI call directly into SCO and L2CAP event functionsUlisses Furquim
The struct hci_proto and all related register/unregister and dispatching code was removed. HCI core code now call directly the SCO and L2CAP event functions. Signed-off-by: Ulisses Furquim <ulisses@profusion.mobi> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-20Bluetooth: Rename info_work to info_timerGustavo F. Padovan
It makes more sense this way, since info_timer is a timer using delayed work API. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-20Bluetooth: convert security timer to delayed_workGustavo F. Padovan
This one also needs to run in process context Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-20Bluetooth: Move l2cap_{set,clear}_timer to l2cap.hGustavo F. Padovan
It is the only place where it is used. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-19module_param: make bool parameters really bool (net & drivers/net)Rusty Russell
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. (Thanks to Joe Perches for suggesting coccinelle for 0/1 -> true/false). Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetoothGustavo F. Padovan
Conflicts: net/bluetooth/l2cap_core.c
2011-12-18Bluetooth: Prevent uninitialized data access in L2CAP configurationMat Martineau
When configuring an ERTM or streaming mode connection, remote devices are expected to send an RFC option in a successful config response. A misbehaving remote device might not send an RFC option, and the L2CAP code should not access uninitialized data in this case. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Add ProFUSION's copyrightGustavo F. Padovan
Add ProFUSION's copyright to some files I've been touching recently. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Change l2cap chan_list to use RCUGustavo F. Padovan
This list has much more reads than writes, so RCU makes senses here, also it avoid deadlock against the socket lock. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: invert locking order in connect pathGustavo F. Padovan
This move some checking code that was in l2cap_sock_connect() to l2cap_chan_connect(). Thus we can invert the lock calls, i.e., call lock_sock() before hci_dev_lock() to avoid a deadlock scenario. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: convert info timer to delayed_workGustavo F. Padovan
Another step of remove interrupt context from Bluetooth Core. Use the system workqueue. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: convert chan_lock to mutexGustavo F. Padovan
spin lock doesn't fit ok anymore on the new code based on workqueues. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Remove sk_backlog usage from L2CAPGustavo F. Padovan
We run everything in the same lock now. The backlog queue is useless now Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Don't use spin_lock socket lock anymoreGustavo F. Padovan
We now run everything in process context, so the mutex lock is the best option. But in some places we still need the bh_lock_sock() Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Move L2CAP timers to workqueueGustavo F. Padovan
L2CAP timers also need to run in process context. As the works in l2cap are small we are using the system worqueue. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Replace spin_lock by mutex in hci_devGustavo F. Padovan
Now we run everything in HCI in process context, so it's a better idea use mutex instead spin_lock. The macro remains hci_dev_lock() (and I got rid of hci_dev_lock_bh()), of course. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-23Bluetooth: Add user readable debug for state changesGustavo F. Padovan
I did this as a part of a testing course at university, but it might be useful upstream as well. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-21Bluetooth: making enable_hs independent from L2CAPAndrei Emeltchenko
Fixes bluetooth compiling when CONFIG_BT_L2CAP is not enabled net/built-in.o: In function `hci_dev_open': (.text+0xdce9a): undefined reference to `enable_hs' Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-16Bluetooth: Fix some checkpatch.pl errors and warningsSzymon Janc
Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-16Bluetooth: Simplify __l2cap_global_chan_by_addrSzymon Janc
Make __l2cap_global_chan_by_addr similar to other find functions. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-16Bluetooth: Refactor loop in l2cap_retransmit_one_frameSzymon Janc
This make it easier to see what is the real reason for loop to exit. skb_queue_next return valid skb or garbage, not NULL. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-04-16 13:36:46 +0000