summaryrefslogtreecommitdiffstats
path: root/net/bluetooth
AgeCommit message (Collapse)Author
2012-11-20Bluetooth: Remove OOB data if device was discovered in bandSzymon Janc
OOB authentication mechanism should be used only if pairing process has been activated by previous OOB information exchange (Core Spec 4.0 , vol. 1, Part A, 5.1.4.3). Stored OOB data for specific device should be removed if that device was discovered in band later on. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-20Bluetooth: AMP: Set no FCS for incoming L2CAP chanAndrei Emeltchenko
When receiving L2CAP Create Channel Request set the channel as L2CAP_FCS_NONE. Then in "L2CAP Config req" following field will be set: "FCS Option 0x00 (No FCS)". So by default High Speed channels have no FCS. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-20Bluetooth: Improve error message printingAndrei Emeltchenko
Instead of printing: "[ 7763.082007] Bluetooth: 2" print something like: "[ 7763.082007] Bluetooth: Trailing bytes: 2 in sframe" Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-20Bluetooth: Set local_amp_id after getting Phylink Completed evtAndrei Emeltchenko
local_amp_id is used in l2cap_physical_cfm and shall be set up before calling it. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-20Bluetooth: Fix sending L2CAP Create Chan ReqAndrei Emeltchenko
When receiving Physical Link Completed event we need to create L2CAP channel with L2CAP Create Chan Request. Current code was sending this command only if connection was pending (which is probably needed in channel move case). If channel is not moved but created Create Chan should be sent for outgoing channel which is checked with BT_CONNECT flag. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-19Bluetooth: trivial: Use __constant for constantsAndrei Emeltchenko
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-19Bluetooth: Disable FCS only for new HS channelsAndrei Emeltchenko
Set chan->fcs to L2CAP_FCS_NONE only for new L2CAP channels (not moved). Other side can still request to use FCS. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-19Bluetooth: Refactor locking in amp_physical_cfmAndrei Emeltchenko
Remove locking from l2cap_physical_cfm and lock chan inside amp_physical_cfm. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-19Bluetooth: Remove unneeded local_amp_id initializationAndrei Emeltchenko
local_amp_id is already set in l2cap_connect() which is called several lines above. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-19Bluetooth: Use __l2cap_no_conn_pending helperAndrei Emeltchenko
Use helper instead of test_bit. This is the only place left using test CONF_CONNECT_PEND flag. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-18Bluetooth: Fix updating advertising state flags and dataJohan Hedberg
This patch adds a callback for the HCI_LE_Set_Advertise_Enable command. The callback is responsible for updating the HCI_LE_PERIPHERAL flag updating as well as updating the advertising data flags field to indicate undirected connectable advertising. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-18Bluetooth: Add support for setting LE advertising dataJohan Hedberg
This patch adds support for setting basing LE advertising data. The three elements supported for now are the advertising flags, the TX power and the friendly name. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-18Bluetooth: Use proper invalid value for tx_powerJohan Hedberg
The core specification defines 127 as the "not available" value (well, "reserved" for BR/EDR and "not available" for LE - but essentially the same). Therefore, instead of testing for 0 (which is in fact a valid value) we should be using this invalid value to test if the tx_power is available. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-14Merge branch 'for-upstream' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
2012-11-09Bluetooth: Fix memory leak when removing a UUIDJohan Hedberg
When removing a UUID from the list in the remove_uuid() function we must also kfree the entry in addition to removing it from the list. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-09Bluetooth: Notify about device registration before power onMarcel Holtmann
It is important that the monitor interface gets notified about a new device before its power on procedure has been started. For some reason that is no longer working as expected and the power on procedure runs first. It is safe to just notify about device registration and trigger the power on procedure afterwards. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-09Bluetooth: Fix error status when pairing failsPaulo Sérgio
When pairing fails due to wrong confirm value, the management layer doesn't report a proper error status. It sends MGMT_STATUS_CONNECT_FAILED instead of MGMT_STATUS_AUTH_FAILED. Most of management functions that receive a status as a parameter expects for it to be encoded as a HCI status. But when a SMP pairing fails, the SMP layer sends the SMP reason as the error status to the management layer. This commit maps all SMP reasons to HCI_ERROR_AUTH_FAILURE, which will be converted to MGMT_STATUS_AUTH_FAILED in the management layer. Reported-by: Claudio Takahasi <claudio.takahasi@openbossa.org> Reviewed-by: João Paulo Rechi Vita <jprvita@openbossa.org> Signed-off-by: Paulo Sérgio <paulo.sergio@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-09Bluetooth: Fix having bogus entries in mgmt_read_index_list replyJohan Hedberg
The mgmt_read_index_list uses one loop to calculate the max needed size of its response with the help of an upper-bound of the controller count. The second loop is more strict as it checks for HCI_SETUP (which might have gotten set after the first loop) and could result in some indexes being skipped. Because of this the function needs to readjust the event length and index count after filling in the response array. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Cc: stable@vger.kernel.org Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: Rename ctrl_id to remote_amp_idAndrei Emeltchenko
Since we have started to use local_amp_id for local AMP Controller Id it makes sense to rename ctrl_id to remote_amp_id since it represents remote AMP controller Id. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: Process Create Chan RequestAndrei Emeltchenko
Add processing L2CAP Create Chan Request. When channel is created save associated high speed link hs_hcon. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: AMP: Use l2cap_physical_cfm in phylink complete evtAndrei Emeltchenko
When receiving HCI Phylink Complete event run amp_physical_cfm which initialize BR/EDR L2CAP channel associated with High Speed link and run l2cap_physical_cfm which shall send L2CAP Create Chan Request. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: AMP: Check for hs_hcon instead of ctrl_idAndrei Emeltchenko
When deciding whether to send EFS configuration response with success, check rather for existence of High Speed physical link hs_hcon then ctrl_id. There might be cases when there is ctrl_id but high speed link is not established yet. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: Disconnect logical link when deleting chanAndrei Emeltchenko
Disconnect logical link for high speed channel hs_hchan associated with L2CAP channel chan. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: AMP: Remove hci_conn receiving error command statusAndrei Emeltchenko
When receiving HCI Event: Command Status for Create Physical Link with Error code remove AMP hcon. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: AMP: Process Disc Physical Link Complete evtAndrei Emeltchenko
Add processing for HCI Disconnection Physical Link Complete Event. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: AMP: Process Disc Logical LinkAndrei Emeltchenko
Add processing for HCI Disconnection Logical Link Complete Event. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: AMP: Add Logical Link Create functionAndrei Emeltchenko
After physical link is created logical link needs to be created. The process starts after L2CAP channel is created and L2CAP Configuration Response with result PENDING is received. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: Derive remote and local amp id from chan structAndrei Emeltchenko
l2cap_chan already keeps information about *_amp_id. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: Return correct L2CAP response typeAndrei Emeltchenko
Return L2CAP_CREATE_CHAN_RSP for Create Channel Request and L2CAP_CONN_RSP for Create Connection Request. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: Save hs_hchan instead of hs_hcon in loglink completeAndrei Emeltchenko
When logical link creation is completed we need to save hs_hchan which represents logical link instead of hs_hcon representing physical link. hs_hcon shall be saved when receiving physical link complete event. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: trivial: Fix braces style and remove empty lineAndrei Emeltchenko
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: mgmt: Use __constant when dealing with constantsSyam Sidhardhan
__constant_cpu_to_le*() is the right go here. Signed-off-by: Syam Sidhardhan <s.syam@samsung.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: Remove unnecessary include export.hSyam Sidhardhan
For files only using THIS_MODULE and/or EXPORT_SYMBOL, map them onto including export.h -- or if the file isn't even using those, then just delete the include. Signed-off-by: Syam Sidhardhan <s.syam@samsung.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: Add put(hcon) when deleting hchanAndrei Emeltchenko
When refcnt reaches zero disconnect timeout will run and hci_conn will be disconnected. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: AMP: Process Logical Link complete evtAndrei Emeltchenko
After receiving HCI Logical Link Complete event finish EFS configuration by sending L2CAP Conf Response with success code. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: AMP: Process Physical Link Complete evtAndrei Emeltchenko
Add processing for HCI Physical Link Complete event. Upon successful status received start L2CAP create channel process. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: Use helper function sending EFS conf rspAndrei Emeltchenko
There is helper function used to send EFS Configuration Response. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: trivial: Remove unneeded assignmentAndrei Emeltchenko
Assignment is not needed here since err is always gets value. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: Fix sending unnecessary HCI_LE_Host_EnableJohan Hedberg
This patch fixes sending an unnecessary HCI_LE_Host_Enable command if the command has already been sent as part of the default HCI init sequence. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: Fix unnecessary EIR update during powering onJohan Hedberg
When powered on the EIR data gets updated as the last step by mgmt. Therefore avoid an update when getting a local name update as that's part of the normal HCI init sequence. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: Fix sending unnecessary HCI_Write_SSP_Mode commandJohan Hedberg
This patch fixes sending an unnecessary HCI_Write_SSP_Mode command if the command has already been sent as part of the default HCI init sequence. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: Fix setting host feature bits for SSPJohan Hedberg
When we get a successful command complete for HCI_Write_SSP_Mode we need to update the host feature bits for the hdev struct accordingly. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: Disallow LE scanning and connecting in peripheral roleJohan Hedberg
When an adapter is in the LE peripheral role scanning for other devices or initiating connections to them is not allowed. This patch makes sure that such attempts will result in appropriate error returns. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: Make use feature test macrosJohan Hedberg
For better code readability and avoiding simple bugs of checking the wrong byte of the features make use of feature test macros whenever possible. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: Fix updating host feature bits for LEJohan Hedberg
When LE has been enabled with the simultaneous BR/EDR & LE parameter set to true we should also update the host features stored in struct hci_dev accordingly. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: mgmt: Restrict BR/EDR settings to BR/EDR-only adaptersJohan Hedberg
This patch makes sure that settings which are specific for BR/EDR capable adapters are not allowed for non-BR/EDR (e.g. LE-only) adapters. Instead, a "not supported" error is returned of such a setting is attempted to be set for a non-BR/EDR adapter. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: Fix HCI command sending when powering on LE-only adaptersJohan Hedberg
This patch makes sure that we don't send BR/EDR-only commands for LE-only adapters when they get powered on. Doing this would just cause command errors. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-24Bluetooth: Replace *_init() for *_setup()Gustavo Padovan
le_init() and bredr_init() are now called le_setup() and bredr_setup() to avoid duplicates names over the tree even if they are all static. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-24Bluetooth: Read adversiting channel TX power during init sequenceJohan Hedberg
This patch adds the reading of the LE advertising channel TX power to the HCI init sequence of LE-capable controllers. This data will be used e.g. for inclusion in the advertising data packets when advertising is enabled. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-24Bluetooth: Add setting of the LE event maskJohan Hedberg
This patch adds setting of the LE event mask to the HCI init procedure for LE-capable controllers. Right now we only set the default mask which is good enough for the events available in the 4.0 core specification. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-16 20:55:14 +0000