summaryrefslogtreecommitdiffstats
path: root/net/bluetooth
AgeCommit message (Collapse)Author
2014-04-25Bluetooth: Fix redundant encryption request for reauthenticationJohan Hedberg
When we're performing reauthentication (in order to elevate the security level from an unauthenticated key to an authenticated one) we do not need to issue any encryption command once authentication completes. Since the trigger for the encryption HCI command is the ENCRYPT_PEND flag this flag should not be set in this scenario. Instead, the REAUTH_PEND flag takes care of all necessary steps for reauthentication. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
2014-04-25Bluetooth: Fix triggering BR/EDR L2CAP Connect too earlyJohan Hedberg
Commit 1c2e004183178 introduced an event handler for the encryption key refresh complete event with the intent of fixing some LE/SMP cases. However, this event is shared with BR/EDR and there we actually want to act only on the auth_complete event (which comes after the key refresh). If we do not do this we may trigger an L2CAP Connect Request too early and cause the remote side to return a security block error. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
2014-04-11net: Fix use after free by removing length arg from sk_data_ready callbacks.David S. Miller
Several spots in the kernel perform a sequence like: skb_queue_tail(&sk->s_receive_queue, skb); sk->sk_data_ready(sk, skb->len); But at the moment we place the SKB onto the socket receive queue it can be consumed and freed up. So this skb->len access is potentially to freed up memory. Furthermore, the skb->len can be modified by the consumer so it is possible that the value isn't accurate. And finally, no actual implementation of this callback actually uses the length argument. And since nobody actually cared about it's value, lots of call sites pass arbitrary values in such as '0' and even '1'. So just remove the length argument from the callback, that way there is no confusion whatsoever and all of these use-after-free cases get fixed as a side effect. Based upon a patch by Eric Dumazet and his suggestion to audit this issue tree-wide. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Here is my initial pull request for the networking subsystem during this merge window: 1) Support for ESN in AH (RFC 4302) from Fan Du. 2) Add full kernel doc for ethtool command structures, from Ben Hutchings. 3) Add BCM7xxx PHY driver, from Florian Fainelli. 4) Export computed TCP rate information in netlink socket dumps, from Eric Dumazet. 5) Allow IPSEC SA to be dumped partially using a filter, from Nicolas Dichtel. 6) Convert many drivers to pci_enable_msix_range(), from Alexander Gordeev. 7) Record SKB timestamps more efficiently, from Eric Dumazet. 8) Switch to microsecond resolution for TCP round trip times, also from Eric Dumazet. 9) Clean up and fix 6lowpan fragmentation handling by making use of the existing inet_frag api for it's implementation. 10) Add TX grant mapping to xen-netback driver, from Zoltan Kiss. 11) Auto size SKB lengths when composing netlink messages based upon past message sizes used, from Eric Dumazet. 12) qdisc dumps can take a long time, add a cond_resched(), From Eric Dumazet. 13) Sanitize netpoll core and drivers wrt. SKB handling semantics. Get rid of never-used-in-tree netpoll RX handling. From Eric W Biederman. 14) Support inter-address-family and namespace changing in VTI tunnel driver(s). From Steffen Klassert. 15) Add Altera TSE driver, from Vince Bridgers. 16) Optimizing csum_replace2() so that it doesn't adjust the checksum by checksumming the entire header, from Eric Dumazet. 17) Expand BPF internal implementation for faster interpreting, more direct translations into JIT'd code, and much cleaner uses of BPF filtering in non-socket ocntexts. From Daniel Borkmann and Alexei Starovoitov" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1976 commits) netpoll: Use skb_irq_freeable to make zap_completion_queue safe. net: Add a test to see if a skb is freeable in irq context qlcnic: Fix build failure due to undefined reference to `vxlan_get_rx_port' net: ptp: move PTP classifier in its own file net: sxgbe: make "core_ops" static net: sxgbe: fix logical vs bitwise operation net: sxgbe: sxgbe_mdio_register() frees the bus Call efx_set_channels() before efx->type->dimension_resources() xen-netback: disable rogue vif in kthread context net/mlx4: Set proper build dependancy with vxlan be2net: fix build dependency on VxLAN mac802154: make csma/cca parameters per-wpan mac802154: allow only one WPAN to be up at any given time net: filter: minor: fix kdoc in __sk_run_filter netlink: don't compare the nul-termination in nla_strcmp can: c_can: Avoid led toggling for every packet. can: c_can: Simplify TX interrupt cleanup can: c_can: Store dlc private can: c_can: Reduce register access can: c_can: Make the code readable ...
2014-04-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - substantial cleanup of the generic and transport layers, in the direction of an ultimate goal of making struct hid_device completely transport independent, by Benjamin Tissoires - cp2112 driver from David Barksdale - a lot of fixes and new hardware support (Dualshock 4) to hid-sony driver, by Frank Praznik - support for Win 8.1 multitouch protocol by Andrew Duggan - other smaller fixes / device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (75 commits) HID: sony: fix force feedback mismerge HID: sony: Set the quriks flag for Bluetooth controllers HID: sony: Fix Sixaxis cable state detection HID: uhid: Add UHID_CREATE2 + UHID_INPUT2 HID: hyperv: fix _raw_request() prototype HID: hyperv: Implement a stub raw_request() entry point HID: hid-sensor-hub: fix sleeping function called from invalid context HID: multitouch: add support for Win 8.1 multitouch touchpads HID: remove hid_output_raw_report transport implementations HID: sony: do not rely on hid_output_raw_report HID: cp2112: remove the last hid_output_raw_report() call HID: cp2112: remove various hid_out_raw_report calls HID: multitouch: add support of other generic collections in hid-mt HID: multitouch: remove pen special handling HID: multitouch: remove registered devices with default behavior HID: hidp: Add a comment that some devices depend on the current behavior of uniq HID: sony: Prevent duplicate controller connections. HID: sony: Perform a boundry check on the sixaxis battery level index. HID: sony: Fix work queue issues HID: sony: Fix multi-line comment styling ...
2014-04-01Merge branch 'for-3.15/hid-core-ll-transport-cleanup' into for-linusJiri Kosina
Conflicts: drivers/hid/hid-ids.h drivers/hid/hid-sony.c drivers/hid/i2c-hid/i2c-hid.c
2014-04-01Merge branch 'for-3.15/ll-driver-new-callbacks' into for-linusJiri Kosina
2014-03-31Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2014-03-26Bluetooth: Fix returning peer address in pending connect stateJohan Hedberg
We should let user space request the peer address also in the pending connect states, i.e. BT_CONNECT and BT_CONNECT2. There is existing user space code that tries to do this and will fail without extending the set of allowed states for the peer address information. This patch adds the two states to the allowed ones in the L2CAP and RFCOMM sock_getname functions, thereby preventing ENOTCONN from being returned. Reported-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Tested-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-03-24Bluetooth: Remove unnecessary assignment in SMPJohan Hedberg
The smp variable in smp_conn_security is not used anywhere before the smp = smp_chan_create() call in the smp_conn_security function so it makes no sense to assign any other value to it before that. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-03-24Bluetooth: Fix potential NULL pointer dereference in smp_conn_securityJohan Hedberg
The smp pointer might not be initialized for jumps to the "done" label in the smp_conn_security function. Furthermore doing the set_bit after done might "overwrite" a previous value of the flag in case pairing was already in progress. This patch moves the call to set_bit before the label so that it is only done for a newly created smp context (as returned by smp_chan_create). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-03-24Bluetooth: Remove LTK re-encryption procedureJohan Hedberg
Due to several devices being unable to handle this procedure reliably (resulting in forced disconnections before pairing completes) it's better to remove it altogether. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-03-24Bluetooth: Don't try to confirm locally initiated SMP pairingJohan Hedberg
In the case that the just-works model would be triggered we only want to confirm remotely initiated pairings (i.e. those triggered by a Security Request or Pairing Request). This patch adds the necessary check to the tk_request function to fall back to the JUST_WORKS method in the case of a locally initiated pairing. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-03-24Bluetooth: Add SMP flag to track which side is the initiatorJohan Hedberg
For remotely initiated just-works pairings we want to show the user a confirmation dialog for the pairing. However, we can only know which side was the initiator by tracking which side sends the first Security Request or Pairing Request PDU. This patch adds a new SMP flag to indicate whether our side was the initiator for the pairing. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-03-24Bluetooth: Fix SMP confirmation callback handlingJohan Hedberg
In the case that a local pairing confirmation (JUST_CFM) has been selected as the method we need to use the user confirm request mgmt event for it with the confirm_hint set to 1 (to indicate confirmation without any specific passkey value). Without this (if passkey_notify was used) the pairing would never proceed. This patch adds the necessary call to mgmt_user_confirm_request in this scenario. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-03-24Bluetooth: Add missing cmd_status handler for LE_Start_EncryptionJohan Hedberg
It is possible that the HCI_LE_Start_Encryption command fails in an early stage and triggers a command status event with the failure code. In such a case we need to properly notify the hci_conn object and cleanly bring the connection down. This patch adds the missing command status handler for this HCI command. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-03-24Bluetooth: Fix potential NULL pointer dereference in SMPJohan Hedberg
If a sudden disconnection happens the l2cap_conn pointer may already have been cleaned up by the time hci_conn_security gets called, resulting in the following oops if we don't have a proper NULL check: BUG: unable to handle kernel NULL pointer dereference at 000000c8 IP: [<c132e2ed>] smp_conn_security+0x26/0x151 *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC CPU: 1 PID: 673 Comm: memcheck-x86-li Not tainted 3.14.0-rc2+ #437 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: f0ef0520 ti: f0d6a000 task.ti: f0d6a000 EIP: 0060:[<c132e2ed>] EFLAGS: 00010246 CPU: 1 EIP is at smp_conn_security+0x26/0x151 EAX: f0ec1770 EBX: f0ec1770 ECX: 00000002 EDX: 00000002 ESI: 00000002 EDI: 00000000 EBP: f0d6bdc0 ESP: f0d6bda0 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 CR0: 80050033 CR2: 000000c8 CR3: 30f0f000 CR4: 00000690 Stack: f4f55000 00000002 f0d6bdcc c1097a2b c1319f40 f0ec1770 00000002 f0d6bdd0 f0d6bde8 c1312a82 f0d6bdfc c1312a82 c1319f84 00000008 f4d81c20 f0e5fd86 f0ec1770 f0d6bdfc f0d6be28 c131be3b c131bdc1 f0d25270 c131be3b 00000008 Call Trace: [<c1097a2b>] ? __kmalloc+0x118/0x128 [<c1319f40>] ? mgmt_pending_add+0x49/0x9b [<c1312a82>] hci_conn_security+0x4a/0x1dd [<c1312a82>] ? hci_conn_security+0x4a/0x1dd [<c1319f84>] ? mgmt_pending_add+0x8d/0x9b [<c131be3b>] pair_device+0x1e1/0x206 [<c131bdc1>] ? pair_device+0x167/0x206 [<c131be3b>] ? pair_device+0x1e1/0x206 [<c131ed44>] mgmt_control+0x275/0x2d6 Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-03-21Bluetooth: Track current configured LE scan type parameterMarcel Holtmann
The LE scan type paramter defines if active scanning or passive scanning is in use. Track the currently set value so it can be used for decision making from other pieces in the core. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-03-21Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2014-03-20Bluetooth: Fix address value for early disconnection eventsJohan Hedberg
We need to ensure that we do not send events to user space with the identity address if we have not yet notified user space of the IRK. The code was previously trying to handle this for the mgmt_pair_device response (which worked well enough) but this is not the only connection related event that might be sent to user space before pairing is successful: another important event is Device Disconnected. The issue can actually be solved more simply than the solution previously used for mgmt_pair_device. Since we do have the identity address tracked as part of the remote IRK struct we can just copy it over from there to the hci_conn struct once we've for real sent the mgmt event for the new IRK. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-03-19Bluetooth: Fix passkey endianess in user_confirm and notify_passkeyJohan Hedberg
The passkey_notify and user_confirm functions in mgmt.c were expecting different endianess for the passkey, leading to a big endian bug and sparse warning in recently added SMP code. This patch converts both functions to expect host endianess and do the conversion to little endian only when assigning to the mgmt event struct. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-03-19Bluetooth: Enforce strict Secure Connections Only mode securityMarcel Holtmann
In Secure Connections Only mode, it is required that Secure Connections is used for pairing and that the link key is encrypted with AES-CCM using a P-256 authenticated combination key. If this is not the case, then new connection shall be refused or existing connections shall be dropped. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-03-19Bluetooth: Fix Pair Device response parameters for pairing failureJohan Hedberg
It is possible that pairing fails after we've already received remote identity information. One example of such a situation is when re-encryption using the LTK fails. In this case the hci_conn object has already been updated with the identity address but user space does not yet know about it (since we didn't notify it of the new IRK yet). To ensure user space doesn't get a Pair Device command response with an unknown address always use the same address in the response as was used for the original command. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-03-19Bluetooth: Fix SMP user passkey notification mgmt eventJohan Hedberg
When performing SMP pairing with MITM protection one side needs to enter the passkey while the other side displays to the user what needs to be entered. Nowhere in the SMP specification does it say that the displaying side needs to any kind of confirmation of the passkey, even though a code comment in smp.c implies this. This patch removes the misleading comment and converts the code to use the passkey notification mgmt event instead of the passkey confirmation mgmt event. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-03-19Bluetooth: Increase SMP re-encryption delay to 500msJohan Hedberg
In some cases the current 250ms delay is not enough for the remote to receive the keys, as can be witnessed by the following log: > ACL Data RX: Handle 64 flags 0x02 dlen 21 [hci1] 231.414217 SMP: Signing Information (0x0a) len 16 Signature key: 555bb66b7ab3abc9d5c287c97fe6eb29 < ACL Data TX: Handle 64 flags 0x00 dlen 21 [hci1] 231.414414 SMP: Encryption Information (0x06) len 16 Long term key: 2a7cdc233c9a4b1f3ed31dd9843fea29 < ACL Data TX: Handle 64 flags 0x00 dlen 15 [hci1] 231.414466 SMP: Master Identification (0x07) len 10 EDIV: 0xeccc Rand: 0x322e0ef50bd9308a < ACL Data TX: Handle 64 flags 0x00 dlen 21 [hci1] 231.414505 SMP: Signing Information (0x0a) len 16 Signature key: bbda1b2076e2325aa66fbcdd5388f745 > HCI Event: Number of Completed Packets (0x13) plen 5 [hci1] 231.483130 Num handles: 1 Handle: 64 Count: 2 < HCI Command: LE Start Encryption (0x08|0x0019) plen 28 [hci1] 231.664211 Handle: 64 Random number: 0x5052ad2b75fed54b Encrypted diversifier: 0xb7c2 Long term key: a336ede66711b49a84bde9b41426692e > HCI Event: Command Status (0x0f) plen 4 [hci1] 231.666937 LE Start Encryption (0x08|0x0019) ncmd 1 Status: Success (0x00) > HCI Event: Number of Completed Packets (0x13) plen 5 [hci1] 231.712646 Num handles: 1 Handle: 64 Count: 1 > HCI Event: Disconnect Complete (0x05) plen 4 [hci1] 232.562587 Status: Success (0x00) Handle: 64 Reason: Remote User Terminated Connection (0x13) As can be seen, the last key (Signing Information) is sent at 231.414505 but the completed packets event for it comes only at 231.712646, i.e. roughly 298ms later. To have a better margin of error this patch increases the delay to 500ms. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-03-19Bluetooth: Simplify logic when checking SMP_FLAG_TK_VALIDJohan Hedberg
This is a trivial coding style simplification by instead of having an extra early return to instead revert the if condition and do the single needed queue_work() call there. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-03-18Bluetooth: Fix MITM flag when initiating SMP pairingJohan Hedberg
The pairing process initiated through mgmt sets the conn->auth_type value regardless of BR/EDR or LE pairing. This value will contain the MITM flag if the local IO capability allows it. When sending the SMP pairing request we should check the value and ensure that the MITM bit gets correctly set in the bonding flags. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-03-18Bluetooth: Fix smp_e byte order to be consistent with SMP specificationJohan Hedberg
The SMP specification is written with the assumption that both key information, plaintextData and encryptedData follow the same little endian byte ordering as the rest of SMP. Since the kernel crypto routines expect big endian data the code has had to do various byte swapping tricks to make the behavior as expected, however the swapping has been scattered all around the place. This patch centralizes the byte order swapping into the smp_e function by making its public interface match what the other SMP functions expect as per specification. The benefit is vastly simplified calls to smp_e. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-03-18Bluetooth: Fix const declaration for swap function src parameterJohan Hedberg
To make it possible to (correctly) pass data declared as const as the src parameter to the swap56 and swap128 functions declare this parameter also as const. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-03-14Bluetooth: Fix updating SMP remote key distribution informationJohan Hedberg
When performing pairing using SMP the remote may clear any key distribution bits it wants in its pairing response. We must therefore update our local variable accordingly, otherwise we might get stuck waiting for keys that will never come. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-03-14HID: remove hid_output_raw_report transport implementationsBenjamin Tissoires
Nobody calls hid_output_raw_report anymore, and nobody should. We can now remove the various implementation in the different transport drivers and the declarations. Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-03-13Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/ath/ath9k/recv.c
2014-03-13Bluetooth: make sure 6LOWPAN_IPHC is built-in if neededArnd Bergmann
Commit 975508879 "Bluetooth: make bluetooth 6lowpan as an option" ensures that 6LOWPAN_IPHC is turned on when we have BT_6LOWPAN enabled in Kconfig, but it allows building the IPHC code as a loadable module even if the entire Bluetooth stack is built-in, and that causes a link error. We can solve that by moving the 'select' statement into CONFIG_BT, which is a "tristate" option to enforce that 6LOWPAN_IPHC can only be a module if BT also is a module. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-03-12Bluetooth: Convert uses of __constant_<foo> to <foo>Joe Perches
The use of __constant_<foo> has been unnecessary for quite awhile now. Make these uses consistent with the rest of the kernel. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-03-11Bluetooth: Enable duplicates filter in background scanAndre Guedes
To avoid flooding the host with useless advertising reports during background scan, we enable the duplicates filter from controller. However, enabling duplicates filter requires a small change in background scan routine in order to fix the following scenario: 1) Background scan is running. 2) A device disconnects and starts advertising. 3) Before host gets the disconnect event, the advertising is reported to host. Since there is no pending LE connection at that time, nothing happens. 4) Host gets the disconnection event and adds a pending connection. 5) No advertising is reported (since controller is filtering) and the connection is never established. So, to address this scenario, we should always restart background scan to unsure we don't miss any advertising report (due to duplicates filter). Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-03-11Bluetooth: Fix aborting eSCO connection in case of error 0x20Andrew Earl
Add additional error case to attempt alternative configuration for SCO. Error occurs with Intel BT controller where fallback is not attempted as the error 0x20 Unsupported LMP Parameter value is not included in the list of errors where a retry should be attempted. The problem also affects PTS test case TC_HF_ACS_BV_05_I. See the HCI log below for details: < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 handle 256 voice setting 0x0060 ptype 0x0380 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 > HCI Event: Max Slots Change (0x1b) plen 3 handle 256 slots 1 > HCI Event: Synchronous Connect Complete (0x2c) plen 17 status 0x20 handle 0 bdaddr 00:80:98:09:0B:19 type eSCO Error: Unsupported LMP Parameter Value < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 handle 256 voice setting 0x0060 ptype 0x0380 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 > HCI Event: Max Slots Change (0x1b) plen 3 handle 256 slots 5 > HCI Event: Synchronous Connect Complete (0x2c) plen 17 status 0x20 handle 0 bdaddr 00:80:98:09:0B:19 type eSCO Error: Unsupported LMP Parameter Value < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 handle 256 voice setting 0x0060 ptype 0x03c8 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 > HCI Event: Max Slots Change (0x1b) plen 3 handle 256 slots 1 > HCI Event: Synchronous Connect Complete (0x2c) plen 17 status 0x00 handle 257 bdaddr 00:80:98:09:0B:19 type eSCO Air mode: CVSD See btmon log for further details: > HCI Event (0x0f) plen 4 [hci0] 44.888063 Setup Synchronous Connection (0x01|0x0028) ncmd 1 Status: Success (0x00) > HCI Event (0x1b) plen 3 [hci0] 44.893064 Handle: 256 Max slots: 1 > HCI Event (0x2c) plen 17 [hci0] 44.942080 Status: Unsupported LMP Parameter Value (0x20) Handle: 0 Address: 00:1B:DC:06:04:B0 (OUI 00-1B-DC) Link type: eSCO (0x02) Transmission interval: 0x00 Retransmission window: 0x01 RX packet length: 0 TX packet length: 0 Air mode: CVSD (0x02) > HCI Event (0x1b) plen 3 [hci0] 44.948054 Handle: 256 Max slots: 5 Signed-off-by: Andrew Earl <andrewx.earl@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-03-11Bluetooth: make bluetooth 6lowpan as an optionAlexander Aring
Currently you can have bluetooth 6lowpan without ipv6 enabled. This doesn't make any sense. With this patch you can disable/enable bluetooth 6lowpan support at compile time. The current bluetooth 6lowpan implementation doesn't check the return value of 6lowpan function. Nevertheless I added -EOPNOTSUPP as return value if 6lowpan bluetooth is disabled. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-03-10Bluetooth: Make LTK and CSRK only persisent when bondingMarcel Holtmann
In case the pairable option has been disabled, the pairing procedure does not create keys for bonding. This means that these generated keys should not be stored persistently. For LTK and CSRK this is important to tell userspace to not store these new keys. They will be available for the lifetime of the device, but after the next power cycle they should not be used anymore. Inform userspace to actually store the keys persistently only if both sides request bonding. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-03-09Bluetooth: Add support for handling signature resolving keysMarcel Holtmann
The connection signature resolving key (CSRK) is used for attribute protocol signed write procedures. This change generates a new local key during pairing and requests the peer key as well. Newly generated key and received key will be provided to userspace using the New Signature Resolving Key management event. The Master CSRK can be used for verification of remote signed write PDUs and the Slave CSRK can be used for sending signed write PDUs to the remote device. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-03-07Bluetooth: Fix skb allocation check for A2MPGustavo Padovan
vtable's method alloc_skb() needs to return a ERR_PTR in case of err and not a NULL. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-03-07Bluetooth: Fix expected key count debug logsJohan Hedberg
The debug logs for reporting a discrepancy between the expected amount of keys and the actually received amount of keys got these value mixed up. This patch fixes the issue. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-03-066lowpan: move 6lowpan header to include/netAlexander Aring
This header is used by bluetooth and ieee802154 branch. This patch move this header to the include/net directory to avoid a use of a relative path in include. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-05Bluetooth: Fix removing Long Term KeyClaudio Takahasi
This patch fixes authentication failure on LE link re-connection when BlueZ acts as slave (peripheral). LTK is removed from the internal list after its first use causing PIN or Key missing reply when re-connecting the link. The LE Long Term Key Request event indicates that the master is attempting to encrypt or re-encrypt the link. Pre-condition: BlueZ host paired and running as slave. How to reproduce(master): 1) Establish an ACL LE encrypted link 2) Disconnect the link 3) Try to re-establish the ACL LE encrypted link (fails) > HCI Event: LE Meta Event (0x3e) plen 19 LE Connection Complete (0x01) Status: Success (0x00) Handle: 64 Role: Slave (0x01) ... @ Device Connected: 00:02:72:DC:29:C9 (1) flags 0x0000 > HCI Event: LE Meta Event (0x3e) plen 13 LE Long Term Key Request (0x05) Handle: 64 Random number: 875be18439d9aa37 Encryption diversifier: 0x76ed < HCI Command: LE Long Term Key Request Reply (0x08|0x001a) plen 18 Handle: 64 Long term key: 2aa531db2fce9f00a0569c7d23d17409 > HCI Event: Command Complete (0x0e) plen 6 LE Long Term Key Request Reply (0x08|0x001a) ncmd 1 Status: Success (0x00) Handle: 64 > HCI Event: Encryption Change (0x08) plen 4 Status: Success (0x00) Handle: 64 Encryption: Enabled with AES-CCM (0x01) ... @ Device Disconnected: 00:02:72:DC:29:C9 (1) reason 3 < HCI Command: LE Set Advertise Enable (0x08|0x000a) plen 1 Advertising: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 LE Set Advertise Enable (0x08|0x000a) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 LE Connection Complete (0x01) Status: Success (0x00) Handle: 64 Role: Slave (0x01) ... @ Device Connected: 00:02:72:DC:29:C9 (1) flags 0x0000 > HCI Event: LE Meta Event (0x3e) plen 13 LE Long Term Key Request (0x05) Handle: 64 Random number: 875be18439d9aa37 Encryption diversifier: 0x76ed < HCI Command: LE Long Term Key Request Neg Reply (0x08|0x001b) plen 2 Handle: 64 > HCI Event: Command Complete (0x0e) plen 6 LE Long Term Key Request Neg Reply (0x08|0x001b) ncmd 1 Status: Success (0x00) Handle: 64 > HCI Event: Disconnect Complete (0x05) plen 4 Status: Success (0x00) Handle: 64 Reason: Authentication Failure (0x05) @ Device Disconnected: 00:02:72:DC:29:C9 (1) reason 0 Signed-off-by: Claudio Takahasi <claudio.takahasi@openbossa.org> Cc: stable@vger.kernel.org Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-02-28Bluetooth: Remove unnecessary stop_scan_complete functionJohan Hedberg
The stop_scan_complete function was used as an intermediate step before doing the actual connection creation. Since we're using hci_request there's no reason to have this extra function around, i.e. we can simply put both HCI commands into the same request. The single task that the intermediate function had, i.e. indicating discovery as stopped is now taken care of by a new HCI_LE_SCAN_INTERRUPTED flag which allows us to do the discovery state update when the stop scan command completes. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-28Bluetooth: Fix trying to disable scanning twiceJohan Hedberg
The discovery process has a timer for disabling scanning, however scanning might be disabled through other means too like the auto-connect process. We should therefore ensure that the timer is never active after sending a HCI command to disable scanning. There was some existing code in stop_scan_complete trying to avoid the timer when a connect request interrupts a discovery procedure, but the other way around was not covered. This patch covers both scenarios by canceling the timer as soon as we get a successful command complete for the disabling HCI command. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-28Bluetooth: Delay LTK encryption to let remote receive all keysJohan Hedberg
Some devices may refuse to re-encrypt with the LTK if they haven't received all our keys yet. This patch adds a 250ms delay before attempting re-encryption with the LTK. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-28Bluetooth: Re-encrypt link after receiving an LTKJohan Hedberg
It's not strictly speaking required to re-encrypt a link once we receive an LTK since the connection is already encrypted with the STK. However, re-encrypting with the LTK allows us to verify that we've received an LTK that actually works. This patch updates the SMP code to request encrypting with the LTK in case we're in master role and waits until the key refresh complete event before notifying user space of the distributed keys. A new flag is also added for the SMP context to ensure that we re-encryption only once in case of multiple calls to smp_distribute_keys. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-28Bluetooth: Add timeout for LE connection attemptsJohan Hedberg
LE connection attempts do not have a controller side timeout in the same way as BR/EDR has (in form of the page timeout). Since we always do scanning before initiating connections the attempts are always expected to succeed in some reasonable time. This patch adds a timer which forces a cancellation of the connection attempt within 20 seconds if it has not been successful by then. This way we e.g. ensure that mgmt_pair_device times out eventually and gives an error response. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-28Bluetooth: Use hdev->init/resp_addr values for smp_c1 functionJohan Hedberg
Now that we have nicely tracked values of the initiator and responder address information we can pass that directly to the smp_c1 function without worrying e.g. about who initiated the connection. This patch updates the two places in smp.c to use the new variables. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-28Bluetooth: Track LE initiator and responder address informationJohan Hedberg
For SMP we need the local and remote addresses (and their types) that were used to establish the connection. These may be different from the Identity Addresses or even the current RPA. To guarantee that we have this information available and it is correct track these values separately from the very beginning of the connection. For outgoing connections we set the values as soon as we get a successful command status for HCI_LE_Create_Connection (for which the patch adds a command status handler function) and for incoming connections as soon as we get a LE Connection Complete HCI event. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-23 15:18:12 +0000