summaryrefslogtreecommitdiffstats
path: root/net/dccp/sysctl.c
AgeCommit message (Collapse)Author
2011-01-07dccp: make upper bound for seq_window consistent on 32/64 bitGerrit Renker
The 'seq_window' sysctl sets the initial value for the DCCP Sequence Window, which may range from 32..2^46-1 (RFC 4340, 7.5.2). The patch sets the upper bound consistently to 2^32-1 on both 32 and 64 bit systems, which should be sufficient - with a RTT of 1sec and 1-byte packets, a seq_window of 2^32-1 corresponds to a link speed of 34 Gbps. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2009-11-12sysctl net: Remove unused binary sysctl codeEric W. Biederman
Now that sys_sysctl is a compatiblity wrapper around /proc/sys all sysctl strategy routines, and all ctl_name and strategy entries in the sysctl tables are unused, and can be revmoed. In addition neigh_sysctl_register has been modified to no longer take a strategy argument and it's callers have been modified not to pass one. Cc: "David Miller" <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: netdev@vger.kernel.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2009-01-21dccp: Initialisation and type-checking of feature sysctlsGerrit Renker
This patch takes care of initialising and type-checking sysctls related to feature negotiation. Type checking is important since some of the sysctls now directly impact the feature-negotiation process. The sysctls are initialised with the known default values for each feature. For the type-checking the value constraints from RFC 4340 are used: * Sequence Window uses the specified Wmin=32, the maximum is ulong (4 bytes), tested and confirmed that it works up to 4294967295 - for Gbps speed; * Ack Ratio is between 0 .. 0xffff (2-byte unsigned integer); * CCIDs are between 0 .. 255; * request_retries, retries1, retries2 also between 0..255 for good measure; * tx_qlen is checked to be non-negative; * sync_ratelimit remains as before. Notes: ------ 1. Die s@sysctl_dccp_feat@sysctl_dccp@g since the sysctls are now in feat.c. 2. As pointed out by Arnaldo, the pattern of type-checking repeats itself in other places, sometimes with exactly the same kind of definitions (e.g. "static int zero;"). It may be a good idea (kernel janitors?) to consolidate type checking. For the sake of keeping the changeset small and in order not to affect other subsystems, I have not strived to generalise here. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-08dccp ccid-2: Phase out the use of boolean Ack Vector sysctlGerrit Renker
This removes the use of the sysctl and the minisock variable for the Send Ack Vector feature, as it now is handled fully dynamically via feature negotiation (i.e. when CCID-2 is enabled, Ack Vectors are automatically enabled as per RFC 4341, 4.). Using a sysctl in parallel to this implementation would open the door to crashes, since much of the code relies on tests of the boolean minisock / sysctl variable. Thus, this patch replaces all tests of type if (dccp_msk(sk)->dccpms_send_ack_vector) /* ... */ with if (dp->dccps_hc_rx_ackvec != NULL) /* ... */ The dccps_hc_rx_ackvec is allocated by the dccp_hdlr_ackvec() when feature negotiation concluded that Ack Vectors are to be used on the half-connection. Otherwise, it is NULL (due to dccp_init_sock/dccp_create_openreq_child), so that the test is a valid one. The activation handler for Ack Vectors is called as soon as the feature negotiation has concluded at the * server when the Ack marking the transition RESPOND => OPEN arrives; * client after it has sent its ACK, marking the transition REQUEST => PARTOPEN. Adding the sequence number of the Response packet to the Ack Vector has been removed, since (a) connection establishment implies that the Response has been received; (b) the CCIDs only look at packets received in the (PART)OPEN state, i.e. this entry will always be ignored; (c) it can not be used for anything useful - to detect loss for instance, only packets received after the loss can serve as pseudo-dupacks. There was a FIXME to change the error code when dccp_ackvec_add() fails. I removed this after finding out that: * the check whether ackno < ISN is already made earlier, * this Response is likely the 1st packet with an Ackno that the client gets, * so when dccp_ackvec_add() fails, the reason is likely not a packet error. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-08dccp: Remove manual influence on NDP Count featureGerrit Renker
Updating the NDP count feature is handled automatically now: * for CCID-2 it is disabled, since the code does not use NDP counts; * for CCID-3 it is enabled, as NDP counts are used to determine loss lengths. Allowing the user to change NDP values leads to unpredictable and failing behaviour, since it is then possible to disable NDP counts even when they are needed (e.g. in CCID-3). This means that only those user settings are sensible that agree with the values for Send NDP Count implied by the choice of CCID. But those settings are already activated by the feature negotiation (CCID dependency tracking), hence this form of support is redundant. At startup the initialisation of the NDP count feature uses the default value of 0, which is done implicitly by the zeroing-out of the socket when it is allocated. If the choice of CCID or feature negotiation enables NDP count, this will then be updated via the NDP activation handler. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-16dccp: Deprecate Ack Ratio sysctlGerrit Renker
This patch deprecates the Ack Ratio sysctl, since * Ack Ratio is entirely ignored by CCID-3 and CCID-4, * Ack Ratio currently doesn't work in CCID-2 (i.e. is always set to 1); * even if it would work in CCID-2, there is no point for a user to change it: - Ack Ratio is constrained by cwnd (RFC 4341, 6.1.2), - if Ack Ratio > cwnd, the system resorts to spurious RTO timeouts (since waiting for Acks which will never arrive in this window), - cwnd is not a user-configurable value. The only reasonable place for Ack Ratio is to print it for debugging. It is planned to do this later on, as part of e.g. dccp_probe. With this patch Ack Ratio is now under full control of feature negotiation: * Ack Ratio is resolved as a dependency of the selected CCID; * if the chosen CCID supports it (i.e. CCID == CCID-2), Ack Ratio is set to the default of 2, following RFC 4340, 11.3 - "New connections start with Ack Ratio 2 for both endpoints"; * what happens then is part of another patch set, since it concerns the dynamic update of Ack Ratio while the connection is in full flight. Thanks to Tomasz Grobelny for discussion leading up to this patch. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NET]: Simple ctl_table to ctl_path conversions.Pavel Emelyanov
This patch includes many places, that only required replacing the ctl_table-s with appropriate ctl_paths and call register_sysctl_paths(). Nothing special was done with them. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-17[DCCP]: fix link error with !CONFIG_SYSCTLIngo Molnar
Do not define the sysctl_dccp_sync_ratelimit sysctl variable in the CONFIG_SYSCTL dependent sysctl.c module - move it to input.c instead. This fixes the following build bug: net/built-in.o: In function `dccp_check_seqno': input.c:(.text+0xbd859): undefined reference to `sysctl_dccp_sync_ratelimit' distcc[29953] ERROR: compile (null) on localhost failed make: *** [vmlinux] Error 1 Found via 'make randconfig' build testing. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[DCCP]: Rate-limit DCCP-SyncsGerrit Renker
This implements a SHOULD from RFC 4340, 7.5.4: "To protect against denial-of-service attacks, DCCP implementations SHOULD impose a rate limit on DCCP-Syncs sent in response to sequence-invalid packets, such as not more than eight DCCP-Syncs per second." The rate-limit is maintained on a per-socket basis. This is a more stringent policy than enforcing the rate-limit on a per-source-address basis and protects against attacks with forged source addresses. Moreover, the mechanism is deliberately kept simple. In contrast to xrlim_allow(), bursts of Sync packets in reply to sequence-invalid packets are not supported. This foils such attacks where the receipt of a Sync triggers further sequence-invalid packets. (I have tested this mechanism against xrlim_allow algorithm for Syncs, permitting bursts just increases the problems.) In order to keep flexibility, the timeout parameter can be set via sysctl; and the whole mechanism can even be disabled (which is however not recommended). The algorithm in this patch has been improved with regard to wrapping issues thanks to a suggestion by Arnaldo. Commiter note: Rate limited the step 6 DCCP_WARN too, as it says we're sending a sync. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2007-02-14[PATCH] sysctl: remove insert_at_head from register_sysctlEric W. Biederman
The semantic effect of insert_at_head is that it would allow new registered sysctl entries to override existing sysctl entries of the same name. Which is pain for caching and the proc interface never implemented. I have done an audit and discovered that none of the current users of register_sysctl care as (excpet for directories) they do not register duplicate sysctl entries. So this patch simply removes the support for overriding existing entries in the sys_sysctl interface since no one uses it or cares and it makes future enhancments harder. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Corey Minyard <minyard@acm.org> Cc: Neil Brown <neilb@suse.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jan Kara <jack@ucw.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] sysctl: dccp: remove unnecessary insert_at_head flagEric W. Biederman
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Arnaldo Carvalho de Melo <acme@conectiva.com.br> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-12-02[DCCP]: Remove allocation of sysctl numbersGerrit Renker
This is in response to a request sent earlier by Eric W. Biederman and replaces all sysctl numbers for net.dccp.default with CTL_UNNUMBERED. It has been tested to compile and to work. Commiter note: I've removed the use of CTL_UNNUMBERED, not setting .ctl_name sets it to 0, that is the what CTL_UNNUMBERED is, reason is to avoid unneeded source code cluttering. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2006-12-02[DCCP]: Adds the tx buffer sysctlsIan McDonald
This one got lost on the way from Ian to Gerrit to me, fix it. Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2006-12-02[DCCP]: Introduce a consistent naming scheme for sysctlsGerrit Renker
In order to make their function clearer and obtain a consistent naming scheme to identify sysctls, all existing DCCP sysctls have been prefixed with `sysctl_dccp', following the same convention as used by TCP. Feature-specific sysctls retain the `feat' in the middle, although the `default' has been dropped, since it is obvious from use. Also removed a duplicate `dccp_feat_default_sequence_window' in ipv4.c. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2006-12-02[DCCP]: Add sysctls to control retransmission behaviourGerrit Renker
This adds 3 sysctls which govern the retransmission behaviour of DCCP control packets (3way handshake, feature negotiation). It removes 4 FIXMEs from the code. The close resemblance of sysctl variables to their TCP analogues is emphasised not only by their name, but also by giving them the same initial values. This is useful since there is not much practical experience with DCCP yet. Furthermore, with regard to the previous patch, it is now possible to limit the number of keepalive-Responses by setting net.dccp.default.request_retries (also a bit like in TCP). Lastly, added documentation of all existing DCCP sysctls. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2006-09-22[DCCP]: Shift sysctls into feat.hIan McDonald
This shifts further sysctls into feat.h. No change in functionality - shifting code only. Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-03-20[DCCP] feat: Introduce sysctls for the default featuresArnaldo Carvalho de Melo
[root@qemu ~]# for a in /proc/sys/net/dccp/default/* ; do echo $a ; cat $a ; done /proc/sys/net/dccp/default/ack_ratio 2 /proc/sys/net/dccp/default/rx_ccid 3 /proc/sys/net/dccp/default/send_ackvec 1 /proc/sys/net/dccp/default/send_ndp 1 /proc/sys/net/dccp/default/seq_window 100 /proc/sys/net/dccp/default/tx_ccid 3 [root@qemu ~]# So if wanting to test ccid3 as the tx CCID one can just do: [root@qemu ~]# echo 3 > /proc/sys/net/dccp/default/tx_ccid [root@qemu ~]# echo 2 > /proc/sys/net/dccp/default/rx_ccid [root@qemu ~]# cat /proc/sys/net/dccp/default/[tr]x_ccid 2 3 [root@qemu ~]# Of course we also need the setsockopt for each app to tell its preferences, but for testing or defining something other than CCID2 as the default for apps that don't explicitely set their preference the sysctl interface is handy. Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>