summaryrefslogtreecommitdiffstats
path: root/net/ipv4
AgeCommit message (Collapse)Author
2013-09-06tcp: properly increase rcv_ssthresh for ofo packetsEric Dumazet
TCP receive window handling is multi staged. A socket has a memory budget, static or dynamic, in sk_rcvbuf. Because we do not really know how this memory budget translates to a TCP window (payload), TCP announces a small initial window (about 20 MSS). When a packet is received, we increase TCP rcv_win depending on the payload/truesize ratio of this packet. Good citizen packets give a hint that it's reasonable to have rcv_win = sk_rcvbuf/2 This heuristic takes place in tcp_grow_window() Problem is : We currently call tcp_grow_window() only for in-order packets. This means that reorders or packet losses stop proper grow of rcv_win, and senders are unable to benefit from fast recovery, or proper reordering level detection. Really, a packet being stored in OFO queue is not a bad citizen. It should be part of the game as in-order packets. In our traces, we very often see sender is limited by linux small receive windows, even if linux hosts use autotuning (DRS) and should allow rcv_win to grow to ~3MB. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-06tcp: fix no cwnd growth after timeoutYuchung Cheng
In commit 0f7cc9a3 "tcp: increase throughput when reordering is high", it only allows cwnd to increase in Open state. This mistakenly disables slow start after timeout (CA_Loss). Moreover cwnd won't grow if the state moves from Disorder to Open later in tcp_fastretrans_alert(). Therefore the correct logic should be to allow cwnd to grow as long as the data is received in order in Open, Loss, or even Disorder state. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking changes from David Miller: "Noteworthy changes this time around: 1) Multicast rejoin support for team driver, from Jiri Pirko. 2) Centralize and simplify TCP RTT measurement handling in order to reduce the impact of bad RTO seeding from SYN/ACKs. Also, when both timestamps and local RTT measurements are available prefer the later because there are broken middleware devices which scramble the timestamp. From Yuchung Cheng. 3) Add TCP_NOTSENT_LOWAT socket option to limit the amount of kernel memory consumed to queue up unsend user data. From Eric Dumazet. 4) Add a "physical port ID" abstraction for network devices, from Jiri Pirko. 5) Add a "suppress" operation to influence fib_rules lookups, from Stefan Tomanek. 6) Add a networking development FAQ, from Paul Gortmaker. 7) Extend the information provided by tcp_probe and add ipv6 support, from Daniel Borkmann. 8) Use RCU locking more extensively in openvswitch data paths, from Pravin B Shelar. 9) Add SCTP support to openvswitch, from Joe Stringer. 10) Add EF10 chip support to SFC driver, from Ben Hutchings. 11) Add new SYNPROXY netfilter target, from Patrick McHardy. 12) Compute a rate approximation for sending in TCP sockets, and use this to more intelligently coalesce TSO frames. Furthermore, add a new packet scheduler which takes advantage of this estimate when available. From Eric Dumazet. 13) Allow AF_PACKET fanouts with random selection, from Daniel Borkmann. 14) Add ipv6 support to vxlan driver, from Cong Wang" Resolved conflicts as per discussion. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1218 commits) openvswitch: Fix alignment of struct sw_flow_key. netfilter: Fix build errors with xt_socket.c tcp: Add missing braces to do_tcp_setsockopt caif: Add missing braces to multiline if in cfctrl_linkup_request bnx2x: Add missing braces in bnx2x:bnx2x_link_initialize vxlan: Fix kernel panic on device delete. net: mvneta: implement ->ndo_do_ioctl() to support PHY ioctls net: mvneta: properly disable HW PHY polling and ensure adjust_link() works icplus: Use netif_running to determine device state ethernet/arc/arc_emac: Fix huge delays in large file copies tuntap: orphan frags before trying to set tx timestamp tuntap: purge socket error queue on detach qlcnic: use standard NAPI weights ipv6:introduce function to find route for redirect bnx2x: VF RSS support - VF side bnx2x: VF RSS support - PF side vxlan: Notify drivers for listening UDP port changes net: usbnet: update addr_assign_type if appropriate driver/net: enic: update enic maintainers and driver driver/net: enic: Exposing symbols for Cisco's low latency driver ...
2013-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c net/bridge/br_multicast.c net/ipv6/sit.c The conflicts were minor: 1) sit.c changes overlap with change to ip_tunnel_xmit() signature. 2) br_multicast.c had an overlap between computing max_delay using msecs_to_jiffies and turning MLDV2_MRC() into an inline function with a name using lowercase instead of uppercase letters. 3) stmmac had two overlapping changes, one which conditionally allocated and hooked up a dma_cfg based upon the presence of the pbl OF property, and another one handling store-and-forward DMA made. The latter of which should not go into the new of_find_property() basic block. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05tcp: Add missing braces to do_tcp_setsockoptDave Jones
Signed-off-by: Dave Jones <davej@fedoraproject.org> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04Merge tag 'PTR_RET-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull PTR_RET() removal patches from Rusty Russell: "PTR_RET() is a weird name, and led to some confusing usage. We ended up with PTR_ERR_OR_ZERO(), and replacing or fixing all the usages. This has been sitting in linux-next for a whole cycle" [ There are still some PTR_RET users scattered about, with some of them possibly being new, but most of them existing in Rusty's tree too. We have that #define PTR_RET(p) PTR_ERR_OR_ZERO(p) thing in <linux/err.h>, so they continue to work for now - Linus ] * tag 'PTR_RET-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: GFS2: Replace PTR_RET with PTR_ERR_OR_ZERO Btrfs: volume: Replace PTR_RET with PTR_ERR_OR_ZERO drm/cma: Replace PTR_RET with PTR_ERR_OR_ZERO sh_veu: Replace PTR_RET with PTR_ERR_OR_ZERO dma-buf: Replace PTR_RET with PTR_ERR_OR_ZERO drivers/rtc: Replace PTR_RET with PTR_ERR_OR_ZERO mm/oom_kill: remove weird use of ERR_PTR()/PTR_ERR(). staging/zcache: don't use PTR_RET(). remoteproc: don't use PTR_RET(). pinctrl: don't use PTR_RET(). acpi: Replace weird use of PTR_RET. s390: Replace weird use of PTR_RET. PTR_RET is now PTR_ERR_OR_ZERO(): Replace most. PTR_RET is now PTR_ERR_OR_ZERO
2013-09-04tcp: better comments for RTO initiallizationYuchung Cheng
Commit 1b7fdd2ab585("tcp: do not use cached RTT for RTT estimation") removes important comments on how RTO is initialized and updated. Hopefully this patch puts those information back. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next Pablo Neira Ayuso says: ==================== The following batch contains: * Three fixes for the new synproxy target available in your net-next tree, from Jesper D. Brouer and Patrick McHardy. * One fix for TCPMSS to correctly handling the fragmentation case, from Phil Oester. I'll pass this one to -stable. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04netfilter: SYNPROXY: let unrelated packets continueJesper Dangaard Brouer
Packets reaching SYNPROXY were default dropped, as they were most likely invalid (given the recommended state matching). This patch, changes SYNPROXY target to let packets, not consumed, continue being processed by the stack. This will be more in line other target modules. As it will allow more flexible configurations of handling, logging or matching on packets in INVALID states. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-09-04netfilter: more strict TCP flag matching in SYNPROXYJesper Dangaard Brouer
Its seems Patrick missed to incoorporate some of my requested changes during review v2 of SYNPROXY netfilter module. Which were, to avoid SYN+ACK packets to enter the path, meant for the ACK packet from the client (from the 3WHS). Further there were a bug in ip6t_SYNPROXY.c, for matching SYN packets that didn't exclude the ACK flag. Go a step further with SYN packet/flag matching by excluding flags ACK+FIN+RST, in both IPv4 and IPv6 modules. The intented usage of SYNPROXY is as follows: (gracefully describing usage in commit) iptables -t raw -A PREROUTING -i eth0 -p tcp --dport 80 --syn -j NOTRACK iptables -A INPUT -i eth0 -p tcp --dport 80 -m state UNTRACKED,INVALID \ -j SYNPROXY --sack-perm --timestamp --mss 1480 --wscale 7 --ecn echo 0 > /proc/sys/net/netfilter/nf_conntrack_tcp_loose This does filter SYN flags early, for packets in the UNTRACKED state, but packets in the INVALID state with other TCP flags could still reach the module, thus this stricter flag matching is still needed. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-09-04tcp: Change return value of tcp_rcv_established()Vijay Subramanian
tcp_rcv_established() returns only one value namely 0. We change the return value to void (as suggested by David Miller). After commit 0c24604b (tcp: implement RFC 5961 4.2), we no longer send RSTs in response to SYNs. We can remove the check and processing on the return value of tcp_rcv_established(). We also fix jtcp_rcv_established() in tcp_probe.c to match that of tcp_rcv_established(). Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04net: tcp_probe: adapt tbuf size for recent changesDaniel Borkmann
With recent changes in tcp_probe module (e.g. f925d0a62d ("net: tcp_probe: add IPv6 support")) we also need to take into account that tbuf needs to be updated as format string will be further expanded. tbuf sits on the stack in tcpprobe_read() function that is invoked when user space reads procfs file /proc/net/tcpprobe, hence not fast path as in jtcp_rcv_established(). Having a size similarly as in sctp_probe module of 256 bytes is fully sufficient for that, we need theoretical maximum of 252 bytes otherwise we could get truncated. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04tunnels: harmonize cleanup done on skb on rx pathNicolas Dichtel
The goal of this patch is to harmonize cleanup done on a skbuff on rx path. Before this patch, behaviors were different depending of the tunnel type. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04tunnels: harmonize cleanup done on skb on xmit pathNicolas Dichtel
The goal of this patch is to harmonize cleanup done on a skbuff on xmit path. Before this patch, behaviors were different depending of the tunnel type. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04skb: allow skb_scrub_packet() to be used by tunnelsNicolas Dichtel
This function was only used when a packet was sent to another netns. Now, it can also be used after tunnel encapsulation or decapsulation. Only skb_orphan() should not be done when a packet is not crossing netns. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04iptunnels: remove net arg from iptunnel_xmit()Nicolas Dichtel
This argument is not used, let's remove it. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03net: neighbour: Remove CONFIG_ARPDTim Gardner
This config option is superfluous in that it only guards a call to neigh_app_ns(). Enabling CONFIG_ARPD by default has no change in behavior. There will now be call to __neigh_notify() for each ARP resolution, which has no impact unless there is a user space daemon waiting to receive the notification, i.e., the case for which CONFIG_ARPD was designed anyways. Suggested-by: Eric W. Biederman <ebiederm@xmission.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Gao feng <gaofeng@cn.fujitsu.com> Cc: Joe Perches <joe@perches.com> Cc: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03Merge branch 'for-3.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: "A lot of activities on the cgroup front. Most changes aren't visible to userland at all at this point and are laying foundation for the planned unified hierarchy. - The biggest change is decoupling the lifetime management of css (cgroup_subsys_state) from that of cgroup's. Because controllers (cpu, memory, block and so on) will need to be dynamically enabled and disabled, css which is the association point between a cgroup and a controller may come and go dynamically across the lifetime of a cgroup. Till now, css's were created when the associated cgroup was created and stayed till the cgroup got destroyed. Assumptions around this tight coupling permeated through cgroup core and controllers. These assumptions are gradually removed, which consists bulk of patches, and css destruction path is completely decoupled from cgroup destruction path. Note that decoupling of creation path is relatively easy on top of these changes and the patchset is pending for the next window. - cgroup has its own event mechanism cgroup.event_control, which is only used by memcg. It is overly complex trying to achieve high flexibility whose benefits seem dubious at best. Going forward, new events will simply generate file modified event and the existing mechanism is being made specific to memcg. This pull request contains prepatory patches for such change. - Various fixes and cleanups" Fixed up conflict in kernel/cgroup.c as per Tejun. * 'for-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (69 commits) cgroup: fix cgroup_css() invocation in css_from_id() cgroup: make cgroup_write_event_control() use css_from_dir() instead of __d_cgrp() cgroup: make cgroup_event hold onto cgroup_subsys_state instead of cgroup cgroup: implement CFTYPE_NO_PREFIX cgroup: make cgroup_css() take cgroup_subsys * instead and allow NULL subsys cgroup: rename cgroup_css_from_dir() to css_from_dir() and update its syntax cgroup: fix cgroup_write_event_control() cgroup: fix subsystem file accesses on the root cgroup cgroup: change cgroup_from_id() to css_from_id() cgroup: use css_get() in cgroup_create() to check CSS_ROOT cpuset: remove an unncessary forward declaration cgroup: RCU protect each cgroup_subsys_state release cgroup: move subsys file removal to kill_css() cgroup: factor out kill_css() cgroup: decouple cgroup_subsys_state destruction from cgroup destruction cgroup: replace cgroup->css_kill_cnt with ->nr_css cgroup: bounce cgroup_subsys_state ref kill confirmation to a work item cgroup: move cgroup->subsys[] assignment to online_css() cgroup: reorganize css init / exit paths cgroup: add __rcu modifier to cgroup->subsys[] ...
2013-09-02net: make snmp_mib_free static inlineCong Wang
Fengguang reported: net/built-in.o: In function `in6_dev_finish_destroy': (.text+0x4ca7d): undefined reference to `snmp_mib_free' this is due to snmp_mib_free() is defined when CONFIG_INET is enabled, but in6_dev_finish_destroy() is now moved to core kernel. I think snmp_mib_free() is small enough to be inlined, so just make it static inline. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-31net: unify skb_udp_tunnel_segment() and skb_udp6_tunnel_segment()Cong Wang
As suggested by Pravin, we can unify the code in case of duplicated code. Cc: Pravin Shelar <pshelar@nicira.com> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-30ipv4 tunnels: fix an oops when using ipip/sit with IPsecLi Hongjun
Since commit 3d7b46cd20e3 (ip_tunnel: push generic protocol handling to ip_tunnel module.), an Oops is triggered when an xfrm policy is configured on an IPv4 over IPv4 tunnel. xfrm4_policy_check() calls __xfrm_policy_check2(), which uses skb_dst(skb). But this field is NULL because iptunnel_pull_header() calls skb_dst_drop(skb). Signed-off-by: Li Hongjun <hongjun.li@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-30tcp: tcp_make_synack() should use sock_wmallocPhil Oester
In commit 90ba9b19 (tcp: tcp_make_synack() can use alloc_skb()), Eric changed the call to sock_wmalloc in tcp_make_synack to alloc_skb. In doing so, the netfilter owner match lost its ability to block the SYNACK packet on outbound listening sockets. Revert the change, restoring the owner match functionality. This closes netfilter bugzilla #847. Signed-off-by: Phil Oester <kernel@linuxace.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-30tcp: do not use cached RTT for RTT estimationYuchung Cheng
RTT cached in the TCP metrics are valuable for the initial timeout because SYN RTT usually does not account for serialization delays on low BW path. However using it to seed the RTT estimator maybe disruptive because other components (e.g., pacing) require the smooth RTT to be obtained from actual connection. The solution is to use the higher cached RTT to set the first RTO conservatively like tcp_rtt_estimator(), but avoid seeding the other RTT estimator variables such as srtt. It is also a good idea to keep RTO conservative to obtain the first RTT sample, and the performance is insured by TCP loss probe if SYN RTT is available. To keep the seeding formula consistent across SYN RTT and cached RTT, the rttvar is twice the cached RTT instead of cached RTTVAR value. The reason is because cached variation may be too small (near min RTO) which defeats the purpose of being conservative on first RTO. However the metrics still keep the RTT variations as they might be useful for user applications (through ip). Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== This pull request fixes some issues that arise when 6in4 or 4in6 tunnels are used in combination with IPsec, all from Hannes Frederic Sowa and a null pointer dereference when queueing packets to the policy hold queue. 1) We might access the local error handler of the wrong address family if 6in4 or 4in6 tunnel is protected by ipsec. Fix this by addind a pointer to the correct local_error to xfrm_state_afinet. 2) Add a helper function to always refer to the correct interpretation of skb->sk. 3) Call skb_reset_inner_headers to record the position of the inner headers when adding a new one in various ipv6 tunnels. This is needed to identify the addresses where to send back errors in the xfrm layer. 4) Dereference inner ipv6 header if encapsulated to always call the right error handler. 5) Choose protocol family by skb protocol to not call the wrong xfrm{4,6}_local_error handler in case an ipv6 sockets is used in ipv4 mode. 6) Partly revert "xfrm: introduce helper for safe determination of mtu" because this introduced pmtu discovery problems. 7) Set skb->protocol on tcp, raw and ip6_append_data genereated skbs. We need this to get the correct mtu informations in xfrm. 8) Fix null pointer dereference in xdst_queue_output. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29ipv4: sendto/hdrincl: don't use destination address found in headerChris Clark
ipv4: raw_sendmsg: don't use header's destination address A sendto() regression was bisected and found to start with commit f8126f1d5136be1 (ipv4: Adjust semantics of rt->rt_gateway.) The problem is that it tries to ARP-lookup the constructed packet's destination address rather than the explicitly provided address. Fix this using FLOWI_FLAG_KNOWN_NH so that given nexthop is used. cf. commit 2ad5b9e4bd314fc685086b99e90e5de3bc59e26b Reported-by: Chris Clark <chris.clark@alcatel-lucent.com> Bisected-by: Chris Clark <chris.clark@alcatel-lucent.com> Tested-by: Chris Clark <chris.clark@alcatel-lucent.com> Suggested-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Chris Clark <chris.clark@alcatel-lucent.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29tcp: TSO packets automatic sizingEric Dumazet
After hearing many people over past years complaining against TSO being bursty or even buggy, we are proud to present automatic sizing of TSO packets. One part of the problem is that tcp_tso_should_defer() uses an heuristic relying on upcoming ACKS instead of a timer, but more generally, having big TSO packets makes little sense for low rates, as it tends to create micro bursts on the network, and general consensus is to reduce the buffering amount. This patch introduces a per socket sk_pacing_rate, that approximates the current sending rate, and allows us to size the TSO packets so that we try to send one packet every ms. This field could be set by other transports. Patch has no impact for high speed flows, where having large TSO packets makes sense to reach line rate. For other flows, this helps better packet scheduling and ACK clocking. This patch increases performance of TCP flows in lossy environments. A new sysctl (tcp_min_tso_segs) is added, to specify the minimal size of a TSO packet (default being 2). A follow-up patch will provide a new packet scheduler (FQ), using sk_pacing_rate as an input to perform optional per flow pacing. This explains why we chose to set sk_pacing_rate to twice the current rate, allowing 'slow start' ramp up. sk_pacing_rate = 2 * cwnd * mss / srtt v2: Neal Cardwell reported a suspect deferring of last two segments on initial write of 10 MSS, I had to change tcp_tso_should_defer() to take into account tp->xmit_size_goal_segs Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Van Jacobson <vanj@google.com> Cc: Tom Herbert <therbert@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29tcp: don't apply tsoffset if rcv_tsecr is zeroAndrew Vagin
The zero value means that tsecr is not valid, so it's a special case. tsoffset is used to customize tcp_time_stamp for one socket. tsoffset is usually zero, it's used when a socket was moved from one host to another host. Currently this issue affects logic of tcp_rcv_rtt_measure_ts. Due to incorrect value of rcv_tsecr, tcp_rcv_rtt_measure_ts sets rto to TCP_RTO_MAX. Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Reported-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Andrey Vagin <avagin@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29tcp: initialize rcv_tstamp for restored socketsAndrew Vagin
u32 rcv_tstamp; /* timestamp of last received ACK */ Its value used in tcp_retransmit_timer, which closes socket if the last ack was received more then TCP_RTO_MAX ago. Currently rcv_tstamp is initialized to zero and if tcp_retransmit_timer is called before receiving a first ack, the connection is closed. This patch initializes rcv_tstamp to a timestamp, when a socket was restored. Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Reported-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Andrey Vagin <avagin@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28netfilter: add SYNPROXY core/targetPatrick McHardy
Add a SYNPROXY for netfilter. The code is split into two parts, the synproxy core with common functions and an address family specific target. The SYNPROXY receives the connection request from the client, responds with a SYN/ACK containing a SYN cookie and announcing a zero window and checks whether the final ACK from the client contains a valid cookie. It then establishes a connection to the original destination and, if successful, sends a window update to the client with the window size announced by the server. Support for timestamps, SACK, window scaling and MSS options can be statically configured as target parameters if the features of the server are known. If timestamps are used, the timestamp value sent back to the client in the SYN/ACK will be different from the real timestamp of the server. In order to now break PAWS, the timestamps are translated in the direction server->client. Signed-off-by: Patrick McHardy <kaber@trash.net> Tested-by: Martin Topholm <mph@one.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-08-28net: syncookies: export cookie_v4_init_sequence/cookie_v4_checkPatrick McHardy
Extract the local TCP stack independant parts of tcp_v4_init_sequence() and cookie_v4_check() and export them for use by the upcoming SYNPROXY target. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: David S. Miller <davem@davemloft.net> Tested-by: Martin Topholm <mph@one.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-08-28netfilter: nf_conntrack: make sequence number adjustments usuable without NATPatrick McHardy
Split out sequence number adjustments from NAT and move them to the conntrack core to make them usable for SYN proxying. The sequence number adjustment information is moved to a seperate extend. The extend is added to new conntracks when a NAT mapping is set up for a connection using a helper. As a side effect, this saves 24 bytes per connection with NAT in the common case that a connection does not have a helper assigned. Signed-off-by: Patrick McHardy <kaber@trash.net> Tested-by: Martin Topholm <mph@one.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-08-28netfilter: ip[6]t_REJECT: tcp-reset using wrong MAC source if bridgedPhil Oester
As reported by Casper Gripenberg, in a bridged setup, using ip[6]t_REJECT with the tcp-reset option sends out reset packets with the src MAC address of the local bridge interface, instead of the MAC address of the intended destination. This causes some routers/firewalls to drop the reset packet as it appears to be spoofed. Fix this by bypassing ip[6]_local_out and setting the MAC of the sender in the tcp reset packet. This closes netfilter bugzilla #531. Signed-off-by: Phil Oester <kernel@linuxace.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-08-27net: tcp_probe: allow more advanced ingress filtering by markDaniel Borkmann
Currently, the tcp_probe snooper can either filter packets by a given port (handed to the module via module parameter e.g. port=80) or lets all TCP traffic pass (port=0, default). When a port is specified, the port number is tested against the sk's source/destination port. Thus, if one of them matches, the information will be further processed for the log. As this is quite limited, allow for more advanced filtering possibilities which can facilitate debugging/analysis with the help of the tcp_probe snooper. Therefore, similarly as added to BPF machine in commit 7e75f93e ("pkt_sched: ingress socket filter by mark"), add the possibility to use skb->mark as a filter. If the mark is not being used otherwise, this allows ingress filtering by flow (e.g. in order to track updates from only a single flow, or a subset of all flows for a given port) and other things such as dynamic logging and reconfiguration without removing/re-inserting the tcp_probe module, etc. Simple example: insmod net/ipv4/tcp_probe.ko fwmark=8888 full=1 ... iptables -A INPUT -i eth4 -t mangle -p tcp --dport 22 \ --sport 60952 -j MARK --set-mark 8888 [... sampling interval ...] iptables -D INPUT -i eth4 -t mangle -p tcp --dport 22 \ --sport 60952 -j MARK --set-mark 8888 The current option to filter by a given port is still being preserved. A similar approach could be done for the sctp_probe module as a follow-up. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/wireless/iwlwifi/pcie/trans.c include/linux/inetdevice.h The inetdevice.h conflict involves moving the IPV4_DEVCONF values into a UAPI header, overlapping additions of some new entries. The iwlwifi conflict is a context overlap. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-26xfrm: revert ipv4 mtu determination to dst_mtuHannes Frederic Sowa
In commit 0ea9d5e3e0e03a63b11392f5613378977dae7eca ("xfrm: introduce helper for safe determination of mtu") I switched the determination of ipv4 mtus from dst_mtu to ip_skb_dst_mtu. This was an error because in case of IP_PMTUDISC_PROBE we fall back to the interface mtu, which is never correct for ipv4 ipsec. This patch partly reverts 0ea9d5e3e0e03a63b11392f5613378977dae7eca ("xfrm: introduce helper for safe determination of mtu"). Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-08-25ipip: potential race in ip_tunnel_init_net()Dan Carpenter
Eric Dumazet says that my previous fix for an ERR_PTR dereference (ea857f28ab 'ipip: dereferencing an ERR_PTR in ip_tunnel_init_net()') could be racy and suggests the following fix instead. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-22net: tcp_probe: add IPv6 supportDaniel Borkmann
The tcp_probe currently only supports analysis of IPv4 connections. Therefore, it would be nice to have IPv6 supported as well. Since we have the recently added %pISpc specifier that is IPv4/IPv6 generic, build related sockaddress structures from the flow information and pass this to our format string. Tested with SSH and HTTP sessions on IPv4 and IPv6. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-22net: tcp_probe: kprobes: adapt jtcp_rcv_established signatureDaniel Borkmann
This patches fixes a rather unproblematic function signature mismatch as the const specifier was missing for the th variable; and next to that it adds a build-time assertion so that future function signature mismatches for kprobes will not end badly, similarly as commit 22222997 ("net: sctp: add build check for sctp_sf_eat_sack_6_2/jsctp_sf_eat_sack") did it for SCTP. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-22net: tcp_probe: also include rcv_wnd next to snd_wndDaniel Borkmann
It is helpful to sometimes know the TCP window sizes of an established socket e.g. to confirm that window scaling is working or to tweak the window size to improve high-latency connections, etc etc. Currently the TCP snooper only exports the send window size, but not the receive window size. Therefore, also add the receive window size to the end of the output line. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-22tcp: increase throughput when reordering is highYuchung Cheng
The stack currently detects reordering and avoid spurious retransmission very well. However the throughput is sub-optimal under high reordering because cwnd is increased only if the data is deliverd in order. I.e., FLAG_DATA_ACKED check in tcp_ack(). The more packet are reordered the worse the throughput is. Therefore when reordering is proven high, cwnd should advance whenever the data is delivered regardless of its ordering. If reordering is low, conservatively advance cwnd only on ordered deliveries in Open state, and retain cwnd in Disordered state (RFC5681). Using netperf on a qdisc setup of 20Mbps BW and random RTT from 45ms to 55ms (for reordering effect). This change increases TCP throughput by 20 - 25% to near bottleneck BW. A special case is the stretched ACK with new SACK and/or ECE mark. For example, a receiver may receive an out of order or ECN packet with unacked data buffered because of LRO or delayed ACK. The principle on such an ACK is to advance cwnd on the cummulative acked part first, then reduce cwnd in tcp_fastretrans_alert(). Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-20ipip: dereferencing an ERR_PTR in ip_tunnel_init_net()Dan Carpenter
We need to move the derefernce after the IS_ERR() check. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-20ipv4: raise IP_MAX_MTU to theoretical limitEric Dumazet
As discussed last year [1], there is no compelling reason to limit IPv4 MTU to 0xFFF0, while real limit is 0xFFFF [1] : http://marc.info/?l=linux-netdev&m=135607247609434&w=2 Willem raised this issue again because some of our internal regression tests broke after lo mtu being set to 65536. IP_MTU reports 0xFFF0, and the test attempts to send a RAW datagram of mtu + 1 bytes, expecting the send() to fail, but it does not. Alexey raised interesting points about TCP MSS, that should be addressed in follow-up patches in TCP stack if needed, as someone could also set an odd mtu anyway. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-20tcp: trivial: Remove nocache argument from tcp_v4_send_synackChristoph Paasch
The nocache-argument was used in tcp_v4_send_synack as an argument to inet_csk_route_req. However, since ba3f7f04ef2b (ipv4: Kill FLOWI_FLAG_RT_NOCACHE and associated code.) this is no more used. This patch removes the unsued argument from tcp_v4_send_synack. Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-20Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next Conflicts: net/netfilter/nf_conntrack_proto_tcp.c The conflict had to do with overlapping changes dealing with fixing the use of an "s32" to hold the value returned by NAT_OFFSET(). Pablo Neira Ayuso says: ==================== The following batch contains Netfilter/IPVS updates for your net-next tree. More specifically, they are: * Trivial typo fix in xt_addrtype, from Phil Oester. * Remove net_ratelimit in the conntrack logging for consistency with other logging subsystem, from Patrick McHardy. * Remove unneeded includes from the recently added xt_connlabel support, from Florian Westphal. * Allow to update conntracks via nfqueue, don't need NFQA_CFG_F_CONNTRACK for this, from Florian Westphal. * Remove tproxy core, now that we have socket early demux, from Florian Westphal. * A couple of patches to refactor conntrack event reporting to save a good bunch of lines, from Florian Westphal. * Fix missing locking in NAT sequence adjustment, it did not manifested in any known bug so far, from Patrick McHardy. * Change sequence number adjustment variable to 32 bits, to delay the possible early overflow in long standing connections, also from Patrick. * Comestic cleanups for IPVS, from Dragos Foianu. * Fix possible null dereference in IPVS in the SH scheduler, from Daniel Borkmann. * Allow to attach conntrack expectations via nfqueue. Before this patch, you had to use ctnetlink instead, thus, we save the conntrack lookup. * Export xt_rpfilter and xt_HMARK header files, from Nicolas Dichtel. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-20tcp: set timestamps for restored skb-sAndrey Vagin
When the repair mode is turned off, the write queue seqs are updated so that the whole queue is considered to be 'already sent. The "when" field must be set for such skb. It's used in tcp_rearm_rto for example. If the "when" field isn't set, the retransmit timeout can be calculated incorrectly and a tcp connected can stop for two minutes (TCP_RTO_MAX). Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrey Vagin <avagin@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2013-08-15net: proc_fs: trivial: print UIDs as unsigned intFrancesco Fusco
UIDs are printed in the proc_fs as signed int, whereas they are unsigned int. Signed-off-by: Francesco Fusco <ffusco@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-15ipip: add x-netns supportNicolas Dichtel
This patch allows to switch the netns when packet is encapsulated or decapsulated. In other word, the encapsulated packet is received in a netns, where the lookup is done to find the tunnel. Once the tunnel is found, the packet is decapsulated and injecting into the corresponding interface which stands to another netns. When one of the two netns is removed, the tunnel is destroyed. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-15ipv4 tunnels: use net_eq() helper to check netnsNicolas Dichtel
It's better to use available helpers for these tests. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-15dev: move skb_scrub_packet() after eth_type_trans()Nicolas Dichtel
skb_scrub_packet() was called before eth_type_trans() to let eth_type_trans() set pkt_type. In fact, we should force pkt_type to PACKET_HOST, so move the call after eth_type_trans(). Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>