summaryrefslogtreecommitdiffstats
path: root/net/mac80211
AgeCommit message (Collapse)Author
2014-06-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: net/core/rtnetlink.c net/core/skbuff.c Both conflicts were very simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-08net: force a list_del() in unregister_netdevice_many()Eric Dumazet
unregister_netdevice_many() API is error prone and we had too many bugs because of dangling LIST_HEAD on stacks. See commit f87e6f47933e3e ("net: dont leave active on stack LIST_HEAD") In fact, instead of making sure no caller leaves an active list_head, just force a list_del() in the callee. No one seems to need to access the list after unregister_netdevice_many() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-nextJohn W. Linville
2014-05-28mac80211: set new interfaces as idle upon initAvraham Stern
Mark new interfaces as idle to allow operations that require that interfaces are idle to take place. Interface types that are always not idle (like AP interfaces) will be set as not idle when they are assigned a channel context. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Emmanuel Grumbach<emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-28mac80211: reduce packet loss notifications under loadFelix Fietkau
During strong signal fluctuations under high throughput, few consecutive failed A-MPDU transmissions can easily trigger packet loss notification, and thus (in AP mode) client disconnection. Reduce the number of false positives by checking the A-MPDU status flag and treating a failed A-MPDU as a single packet. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-28mac80211: don't check netdev state for debugfs read/writeArik Nemtsov
Doing so will lead to an oops for a p2p-dev interface, since it has no netdev. Cc: stable@vger.kernel.org Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-28mac80211: fix a memory leak on sta rate selection tableFelix Fietkau
If the rate control algorithm uses a selection table, it is leaked when the station is destroyed - fix that. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Christophe Prévotaux <cprevotaux@nltinc.com> Fixes: 0d528d85c519 ("mac80211: improve the rate control API") Cc: stable@vger.kernel.org # v3.10+ [add commit log entry, remove pointless NULL check] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-27Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-05-27mac80211: fix IBSS join by initializing last_scan_completedKrzysztof Hałasa
Without this fix, freshly rebooted Linux creates a new IBSS instead of joining an existing one. Only when jiffies counter overflows after 5 minutes the IBSS can be successfully joined. Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl> [edit commit message slightly] Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-26mac80211: fix virtual monitor interface additionEmmanuel Grumbach
Since the commit below, cfg80211_chandef_dfs_required() will warn if it gets a an NL80211_IFTYPE_UNSPECIFIED iftype as explicitely written in the commit log. When an virtual monitor interface is added, its type is set in ieee80211_sub_if_data.vif.type, but not in ieee80211_sub_if_data.wdev.iftype which is passed to cfg80211_chandef_dfs_required() hence resulting in the following warning: WARNING: CPU: 1 PID: 21265 at net/wireless/chan.c:376 cfg80211_chandef_dfs_required+0xbc/0x130 [cfg80211]() Modules linked in: [...] CPU: 1 PID: 21265 Comm: ifconfig Tainted: G W O 3.13.11+ #12 Hardware name: Dell Inc. Latitude E6410/0667CC, BIOS A01 03/05/2010 0000000000000009 ffff88008f5fdb08 ffffffff817d4219 ffff88008f5fdb50 ffff88008f5fdb40 ffffffff8106f57d 0000000000000000 0000000000000000 ffff880081062fb8 ffff8800810604e0 0000000000000001 ffff88008f5fdba0 Call Trace: [<ffffffff817d4219>] dump_stack+0x4d/0x66 [<ffffffff8106f57d>] warn_slowpath_common+0x7d/0xa0 [<ffffffff8106f5ec>] warn_slowpath_fmt+0x4c/0x50 [<ffffffffa04ea4ec>] cfg80211_chandef_dfs_required+0xbc/0x130 [cfg80211] [<ffffffffa06b1024>] ieee80211_vif_use_channel+0x94/0x500 [mac80211] [<ffffffffa0684e6b>] ieee80211_add_virtual_monitor+0x1ab/0x5c0 [mac80211] [<ffffffffa0686ae5>] ieee80211_do_open+0xe75/0x1580 [mac80211] [<ffffffffa0687259>] ieee80211_open+0x69/0x70 [mac80211] [snip] Fixes: 00ec75fc5a64 ("cfg80211: pass the actual iftype when calling cfg80211_chandef_dfs_required()") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Acked-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-26mac80211: add a single-transaction driver op to switch contextsLuciano Coelho
In some cases, when the driver is already using all the channel contexts it can handle at once, we have to do an in-place switch (ie. we cannot afford using an extra context temporarily for the transaction). But some drivers may not support switching the channel context assigned to a vif on the fly (ie. without unassigning and assigning it) while others may only work if the context is changed on the fly, without unassigning it first. To allow these different scenarios, add a new driver operation that let's the driver decide how to handle an in-place switch. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-nextJohn W. Linville
2014-05-21mac80211: export the expected throughputAntonio Quartulli
Add get_expected_throughput() API to mac80211 so that each driver can implement its own version based on the RC algorithm they are using (might be using an HW RC algo). The API returns a value expressed in Kbps. Also, add the new get_expected_throughput() member to the rate_control_ops structure in order to be able to query the RC algorithm (this patch provides an implementation of this API for both minstrel and minstrel_ht). The related member in the station_info object is now filled accordingly when dumping a station. Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-19cfg80211: constify MAC addresses in cfg80211 opsJohannes Berg
This propagates through all the drivers and mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-19mac80211: minstrel-ht: small clarificationsJohannes Berg
Antonio and I were looking over this code and some things didn't immediately make sense, so we came up with two small clarifications. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-15mac80211: Handle the CSA counters correctlyAndrei Otcheretianski
Make the beacon CSA counters part of ieee80211_mutable_offsets and don't decrement CSA counters when generating a beacon template. This permits the driver to offload the CSA counters handling. Since mac80211 updates the probe responses with the correct counter, the driver should sync the counter's value with mac80211 using ieee80211_csa_update_counter function. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-15mac80211: Provide ieee80211_beacon_get_template APIAndrei Otcheretianski
Add a new API ieee80211_beacon_get_template, which doesn't affect DTIM counter and should be used if the device generates beacon frames, and new beacon template is needed. In addition set the offsets to TIM IE for MESH interface. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-15mac80211: Support multiple CSA countersAndrei Otcheretianski
Support up to IEEE80211_MAX_CSA_COUNTERS_NUM csa counters. This is defined to be 2 now, to support both CSA and eCSA counters. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-15cfg80211: Support multiple CSA countersAndrei Otcheretianski
Change the type of NL80211_ATTR_CSA_C_OFF_BEACON and NL80211_ATTR_CSA_C_OFF_PRESP to be NLA_BINARY which allows userspace to use beacons and probe responses with multiple CSA counters. This isn't breaking the API since userspace can continue to use nla_put_u16 for this attributes, which is equivalent to a single element u16 array. In addition advertise max number of supported CSA counters. This is needed when using CSA and eCSA IEs together. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-15mac80211: Update CSA counters in mgmt framesAndrei Otcheretianski
Track current csa counter value and use it to update mgmt frames at the provided offsets. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-14mac80211: fix on-channel remain-on-channelJohannes Berg
Jouni reported that if a remain-on-channel was active on the same channel as the current operating channel, then the ROC would start, but any frames transmitted using mgmt-tx on the same channel would get delayed until after the ROC. The reason for this is that the ROC starts, but doesn't have any handling for "remain on the same channel", so it stops the interface queues. The later mgmt-tx then puts the frame on the interface queues (since it's on the current operating channel) and thus they get delayed until after the ROC. To fix this, add some logic to handle remaining on the same channel specially and not stop the queues etc. in this case. This not only fixes the bug but also improves behaviour in this case as data frames etc. can continue to flow. Cc: stable@vger.kernel.org Reported-by: Jouni Malinen <j@w1.fi> Tested-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-13Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-05-13mac80211: fix suspend vs. association raceEmmanuel Grumbach
If the association is in progress while we suspend, the stack will be in a messed up state. Clean it before we suspend. This patch completes Johannes's patch: 1a1cb744de160ee70086a77afff605bbc275d291 Author: Johannes Berg <johannes.berg@intel.com> mac80211: fix suspend vs. authentication race Cc: <stable@vger.kernel.org> Fixes: 12e7f517029d ("mac80211: cleanup generic suspend/resume procedures") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-09mac80211: fix vif name tracingEliad Peller
If sdata doesn't have a valid dev (e.g. in case of monitor vif), the vif_name field was initialized with (a length of) some short string, but later was set to a different, potentially larger one. This resulted in out-of-bounds write, which usually appeared as garbage in the trace log. Simply trace sdata->name, as it should always have the correct name for both cases. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-09mac80211: handle failed restart/resume betterJohannes Berg
When the driver fails during HW restart or resume, the whole stack goes into a very confused state with interfaces being up while the hardware is down etc. Address this by shutting down everything; we'll run into a lot of warnings in the process but that's better than having the whole stack get messed up. Reviewed-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-09mac80211: allow VHT with peers not capable of 40MHzJohannes Berg
There are two (related) issues with this. One case, reported by Michal, is related to hostap: it unsets the 20/40 capability bit for stations that associate when it's in 20 MHz mode. The other case, reported by Eyal, is that some APs like Netgear R6300v2 and probably others based on the BCM4360 chipset can be configured for doing VHT at 20Mhz. In this case the beacon has a VHT IE but the HT cap indicates transmitter only support 20Mhz. In both of these cases, we currently avoid VHT and use only HT this means we can't use the highest rates (MCS8), so fixing this leads to throughput improvements. Reported-by: Michal Kazior <michal.kazior@tieto.com> Reported-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-08mac80211: fix sparse warning caused by __ieee80211_channel_switch()Luciano Coelho
Commit 59af6928 (mac80211: fix CSA tx queue stopping) introduced a sparse warning: net/mac80211/cfg.c:3274:5: warning: symbol '__ieee80211_channel_switch' was not declared. Should it be static? Fix it by declaring the function static. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-08mac80211: disconnect iface if CSA unexpectedly failsMichal Kazior
It doesn't make much sense to leave a crippled interface running. As a side effect this will unblock tx queues with CSA reason immediately after failure instead of until after userspace requests interface to stop. This also gives userspace an opportunity to indirectly see CSA failure. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> [small code cleanup] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-07mac80211: ignore cqm during csaMichal Kazior
It is not guaranteed that multi-vif channel switching is tightly synchronized. It makes sense to ignore cqm (missing beacons, et al) while csa is progressing and re-check it after it completes. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-06mac80211: split CSA finalize functionMichal Kazior
Improves readability and modularity. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-06mac80211: fix CSA tx queue stoppingMichal Kazior
It was possible for tx queues to be stuck stopped if AP CSA finalization failed. In that case neither stop_ap nor do_stop woke the queues up. This means it was impossible to perform tx at all until driver was reloaded or a successful CSA was performed later. It was possible to solve this in a simpler manner however this is more robust and future proof (having multi-vif CSA in mind). New sdata->csa_block_tx is introduced to keep track of which interfaces requested tx to be blocked for CSA. This is required because mac80211 stops all tx queues for that purpose. This means queues must be awoken only when last tx-blocking CSA interface is finished. It is still possible to have tx queues stopped after CSA failure but as soon as offending interfaces are stopped from userspace (stop_ap or ifdown) tx queues are woken up properly. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-05mac80211: mark local variable __maybe_unusedJohannes Berg
The 'local' variable in __ieee80211_vif_copy_chanctx_to_vlans() is only used/needed when lockdep is compiled in, mark it as such to avoid compile warnings in the other case. While at it, fix some indentation where it's used. Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-05mac80211: move TDLS code to another fileArik Nemtsov
With new additions planned, this code is getting too big for cfg.c. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-05mac80211: set an external flag for TDLS stationsArik Nemtsov
Expose a new tdls flag for the public ieee80211_sta struct. This can be used in some rate control decisions. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-05mac80211: fix nested rtnl locking on ieee80211_reconfigEliad Peller
ieee80211_reconfig already holds rtnl, so calling cfg80211_sched_scan_stopped results in deadlock. Use the rtnl-version of this function instead. Fixes: d43c6b6 ("mac80211: reschedule sched scan after HW restart") Cc: stable@vger.kernel.org (3.14+) Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-05mac80211: Fix mac80211 station info rx bitrate for IBSS modeHenning Rogge
Filter out incoming multicast packages before applying their bitrate to the rx bitrate station info field to prevent them from setting the rx bitrate to the basic multicast rate. Signed-off-by: Henning Rogge <hrogge@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-30Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: net/mac80211/chan.c
2014-04-29mac80211: remove BUG_ON usageJohannes Berg
These BUG_ON statements should never trigger, but in the unlikely event that somebody does manage don't stop everything but simply exit the code path with an error. Leave the one BUG_ON where changing it would result in a NULL pointer dereference. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-28mac80211: Support dynamic AP mode channel width changesJouni Malinen
Implement the new cfg80211 capability to enable mac80211-based drivers to support for dynamic channel bandwidth changes (e.g., HT 20/40 MHz changes). Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-28mac80211: remove unnecessary assignmentZhao, Gang
P2P_DEVICE doesn't support ieee80211_bss_info_change_notify() for now, so it's not needed to set changed flags for P2P_DEVICE. Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-28mac80211: avoid calling useless channel context codeZhao, Gang
ieee80211_assign_chanctx() checks if local->use_chanctx is true, so the two code block related to ieee80211_assign_chanctx() can be moved into above if clause, emphasize that these code are executed only if local->use_chanctx is true. Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> [change subject] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25mac80211: change return value of notifier functionZhao, Gang
Return NOTIFY_DONE if we don't care this time's notification, return NOTIFY_OK if we successfully handled this time's notification. That's the formal way to do it. Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25mac80211: remove unnecessary BUG_ON()Zhao, Gang
The BUG_ON(!err) can't be triggered in the code path, so remove it. Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25mac80211: return bool instead of numbers in yes/no functionZhao, Gang
And some code style changes in the function, and correct a typo in comment. Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25mac80211: add option to generate CCMP IVs only for mgmt framesMarek Kwaczynski
Some chips can encrypt managment frames in HW, but require generated IV in the frame. Add a key flag that allows us to achieve this. Signed-off-by: Marek Kwaczynski <marek.kwaczynski@tieto.com> [use BIT(0) to fill that spot, fix indentation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25mac80211: compute chanctx refcount on-the-flyMichal Kazior
It doesn't make much sense to store refcount in the chanctx structure. One still needs to hold chanctx_mtx to get the value safely. Besides, refcount isn't on performance critical paths. This will make implementing chanctx reservation refcounting a little easier. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25mac80211: fix racy usage of chanctx->refcountMichal Kazior
Channel context refcount is protected by chanctx_mtx. Accessing the value without holding the mutex is racy. RCU section didn't guarantee anything here. Theoretically ieee80211_channel_switch() could fail to see refcount change and read "1" instead of, e.g. "2". This means mac80211 could accept CSA even though it shouldn't have. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25mac80211: split ieee80211_free_chanctx()Michal Kazior
The function did a little too much. Split it up so the code can be easily reused in the future. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25mac80211: split ieee80211_new_chanctx()Michal Kazior
The function did a little too much. Split it up so the code can be easily reused in the future. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25mac80211: improve chanctx reservation lookupMichal Kazior
Use a separate function to look for reservation chanctx. For multi-interface/channel reservation search sematics differ slightly. The new routine allows reservations to be merged with chanctx that are already reserved by other interface(s). Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>