| Age | Commit message (Collapse) | Author |
|---|
|
Help produce better optimized code.
Signed-off-by: Thomas Graf <tgraf@noironetworks.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
|
|
The internal and netdev vport remain part of openvswitch.ko. Encap
vports including vxlan, gre, and geneve can be built as separate
modules and are loaded on demand. Modules can be unloaded after use.
Datapath ports keep a reference to the vport module during their
lifetime.
Allows to remove the error prone maintenance of the global list
vport_ops_list.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The combination of two commits:
commit 8e4e1713e4
("openvswitch: Simplify datapath locking.")
commit 2537b4dd0a
("openvswitch:: link upper device for port devices")
introduced a bug where upper_dev wasn't unlinked upon
netdev_unregister notification
The following steps:
modprobe openvswitch
ovs-dpctl add-dp test
ip tuntap add dev tap1 mode tap
ovs-dpctl add-if test tap1
ip tuntap del dev tap1 mode tap
are causing multiple warnings:
[ 62.747557] gre: GRE over IPv4 demultiplexor driver
[ 62.749579] openvswitch: Open vSwitch switching datapath
[ 62.755087] device test entered promiscuous mode
[ 62.765911] device tap1 entered promiscuous mode
[ 62.766033] IPv6: ADDRCONF(NETDEV_UP): tap1: link is not ready
[ 62.769017] ------------[ cut here ]------------
[ 62.769022] WARNING: CPU: 1 PID: 3267 at net/core/dev.c:5501 rollback_registered_many+0x20f/0x240()
[ 62.769023] Modules linked in: openvswitch gre vxlan ip_tunnel libcrc32c ip6table_filter ip6_tables ebtable_nat ebtables nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack xt_CHECKSUM iptable_mangle ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc vhost_net macvtap macvlan vhost kvm_intel kvm dm_crypt iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi hid_generic mxm_wmi eeepc_wmi asus_wmi sparse_keymap dm_multipath psmouse serio_raw usbhid hid parport_pc ppdev firewire_ohci lpc_ich firewire_core e1000e crc_itu_t binfmt_misc igb dca ptp pps_core mac_hid wmi lp parport i2o_config i2o_block video
[ 62.769051] CPU: 1 PID: 3267 Comm: ip Not tainted 3.12.0-rc3+ #60
[ 62.769052] Hardware name: System manufacturer System Product Name/P8Z77 WS, BIOS 3007 07/26/2012
[ 62.769053] 0000000000000009 ffff8807f25cbd28 ffffffff8175e575 0000000000000006
[ 62.769055] 0000000000000000 ffff8807f25cbd68 ffffffff8105314c ffff8807f25cbd58
[ 62.769057] ffff8807f2634000 ffff8807f25cbdc8 ffff8807f25cbd88 ffff8807f25cbdc8
[ 62.769059] Call Trace:
[ 62.769062] [<ffffffff8175e575>] dump_stack+0x55/0x76
[ 62.769065] [<ffffffff8105314c>] warn_slowpath_common+0x8c/0xc0
[ 62.769067] [<ffffffff8105319a>] warn_slowpath_null+0x1a/0x20
[ 62.769069] [<ffffffff8162a04f>] rollback_registered_many+0x20f/0x240
[ 62.769071] [<ffffffff8162a101>] rollback_registered+0x31/0x40
[ 62.769073] [<ffffffff8162a488>] unregister_netdevice_queue+0x58/0x90
[ 62.769075] [<ffffffff8154f900>] __tun_detach+0x140/0x340
[ 62.769077] [<ffffffff8154fb36>] tun_chr_close+0x36/0x60
[ 62.769080] [<ffffffff811bddaf>] __fput+0xff/0x260
[ 62.769082] [<ffffffff811bdf5e>] ____fput+0xe/0x10
[ 62.769084] [<ffffffff8107b515>] task_work_run+0xb5/0xe0
[ 62.769087] [<ffffffff810029b9>] do_notify_resume+0x59/0x80
[ 62.769089] [<ffffffff813a41fe>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[ 62.769091] [<ffffffff81770f5a>] int_signal+0x12/0x17
[ 62.769093] ---[ end trace 838756c62e156ffb ]---
[ 62.769481] ------------[ cut here ]------------
[ 62.769485] WARNING: CPU: 1 PID: 92 at fs/sysfs/inode.c:325 sysfs_hash_and_remove+0xa9/0xb0()
[ 62.769486] sysfs: can not remove 'master', no directory
[ 62.769486] Modules linked in: openvswitch gre vxlan ip_tunnel libcrc32c ip6table_filter ip6_tables ebtable_nat ebtables nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack xt_CHECKSUM iptable_mangle ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc vhost_net macvtap macvlan vhost kvm_intel kvm dm_crypt iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi hid_generic mxm_wmi eeepc_wmi asus_wmi sparse_keymap dm_multipath psmouse serio_raw usbhid hid parport_pc ppdev firewire_ohci lpc_ich firewire_core e1000e crc_itu_t binfmt_misc igb dca ptp pps_core mac_hid wmi lp parport i2o_config i2o_block video
[ 62.769514] CPU: 1 PID: 92 Comm: kworker/1:2 Tainted: G W 3.12.0-rc3+ #60
[ 62.769515] Hardware name: System manufacturer System Product Name/P8Z77 WS, BIOS 3007 07/26/2012
[ 62.769518] Workqueue: events ovs_dp_notify_wq [openvswitch]
[ 62.769519] 0000000000000009 ffff880807ad3ac8 ffffffff8175e575 0000000000000006
[ 62.769521] ffff880807ad3b18 ffff880807ad3b08 ffffffff8105314c ffff880807ad3b28
[ 62.769523] 0000000000000000 ffffffff81a87a1f ffff8807f2634000 ffff880037038500
[ 62.769525] Call Trace:
[ 62.769528] [<ffffffff8175e575>] dump_stack+0x55/0x76
[ 62.769529] [<ffffffff8105314c>] warn_slowpath_common+0x8c/0xc0
[ 62.769531] [<ffffffff81053236>] warn_slowpath_fmt+0x46/0x50
[ 62.769533] [<ffffffff8123e7e9>] sysfs_hash_and_remove+0xa9/0xb0
[ 62.769535] [<ffffffff81240e96>] sysfs_remove_link+0x26/0x30
[ 62.769538] [<ffffffff81631ef7>] __netdev_adjacent_dev_remove+0xf7/0x150
[ 62.769540] [<ffffffff81632037>] __netdev_adjacent_dev_unlink_lists+0x27/0x50
[ 62.769542] [<ffffffff8163213a>] __netdev_adjacent_dev_unlink_neighbour+0x3a/0x50
[ 62.769544] [<ffffffff8163218d>] netdev_upper_dev_unlink+0x3d/0x140
[ 62.769548] [<ffffffffa033c2db>] netdev_destroy+0x4b/0x80 [openvswitch]
[ 62.769550] [<ffffffffa033b696>] ovs_vport_del+0x46/0x60 [openvswitch]
[ 62.769552] [<ffffffffa0335314>] ovs_dp_detach_port+0x44/0x60 [openvswitch]
[ 62.769555] [<ffffffffa0336574>] ovs_dp_notify_wq+0xb4/0x150 [openvswitch]
[ 62.769557] [<ffffffff81075c28>] process_one_work+0x1d8/0x6a0
[ 62.769559] [<ffffffff81075bc8>] ? process_one_work+0x178/0x6a0
[ 62.769562] [<ffffffff8107659b>] worker_thread+0x11b/0x370
[ 62.769564] [<ffffffff81076480>] ? rescuer_thread+0x350/0x350
[ 62.769566] [<ffffffff8107f44a>] kthread+0xea/0xf0
[ 62.769568] [<ffffffff8107f360>] ? flush_kthread_worker+0x150/0x150
[ 62.769570] [<ffffffff81770bac>] ret_from_fork+0x7c/0xb0
[ 62.769572] [<ffffffff8107f360>] ? flush_kthread_worker+0x150/0x150
[ 62.769573] ---[ end trace 838756c62e156ffc ]---
[ 62.769574] ------------[ cut here ]------------
[ 62.769576] WARNING: CPU: 1 PID: 92 at fs/sysfs/inode.c:325 sysfs_hash_and_remove+0xa9/0xb0()
[ 62.769577] sysfs: can not remove 'upper_test', no directory
[ 62.769577] Modules linked in: openvswitch gre vxlan ip_tunnel libcrc32c ip6table_filter ip6_tables ebtable_nat ebtables nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack xt_CHECKSUM iptable_mangle ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc vhost_net macvtap macvlan vhost kvm_intel kvm dm_crypt iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi hid_generic mxm_wmi eeepc_wmi asus_wmi sparse_keymap dm_multipath psmouse serio_raw usbhid hid parport_pc ppdev firewire_ohci lpc_ich firewire_core e1000e crc_itu_t binfmt_misc igb dca ptp pps_core mac_hid wmi lp parport i2o_config i2o_block video
[ 62.769603] CPU: 1 PID: 92 Comm: kworker/1:2 Tainted: G W 3.12.0-rc3+ #60
[ 62.769604] Hardware name: System manufacturer System Product Name/P8Z77 WS, BIOS 3007 07/26/2012
[ 62.769606] Workqueue: events ovs_dp_notify_wq [openvswitch]
[ 62.769607] 0000000000000009 ffff880807ad3ac8 ffffffff8175e575 0000000000000006
[ 62.769609] ffff880807ad3b18 ffff880807ad3b08 ffffffff8105314c ffff880807ad3b58
[ 62.769611] 0000000000000000 ffff880807ad3bd9 ffff8807f2634000 ffff880037038500
[ 62.769613] Call Trace:
[ 62.769615] [<ffffffff8175e575>] dump_stack+0x55/0x76
[ 62.769617] [<ffffffff8105314c>] warn_slowpath_common+0x8c/0xc0
[ 62.769619] [<ffffffff81053236>] warn_slowpath_fmt+0x46/0x50
[ 62.769621] [<ffffffff8123e7e9>] sysfs_hash_and_remove+0xa9/0xb0
[ 62.769622] [<ffffffff81240e96>] sysfs_remove_link+0x26/0x30
[ 62.769624] [<ffffffff81631f22>] __netdev_adjacent_dev_remove+0x122/0x150
[ 62.769627] [<ffffffff81632037>] __netdev_adjacent_dev_unlink_lists+0x27/0x50
[ 62.769629] [<ffffffff8163213a>] __netdev_adjacent_dev_unlink_neighbour+0x3a/0x50
[ 62.769631] [<ffffffff8163218d>] netdev_upper_dev_unlink+0x3d/0x140
[ 62.769633] [<ffffffffa033c2db>] netdev_destroy+0x4b/0x80 [openvswitch]
[ 62.769636] [<ffffffffa033b696>] ovs_vport_del+0x46/0x60 [openvswitch]
[ 62.769638] [<ffffffffa0335314>] ovs_dp_detach_port+0x44/0x60 [openvswitch]
[ 62.769640] [<ffffffffa0336574>] ovs_dp_notify_wq+0xb4/0x150 [openvswitch]
[ 62.769642] [<ffffffff81075c28>] process_one_work+0x1d8/0x6a0
[ 62.769644] [<ffffffff81075bc8>] ? process_one_work+0x178/0x6a0
[ 62.769646] [<ffffffff8107659b>] worker_thread+0x11b/0x370
[ 62.769648] [<ffffffff81076480>] ? rescuer_thread+0x350/0x350
[ 62.769650] [<ffffffff8107f44a>] kthread+0xea/0xf0
[ 62.769652] [<ffffffff8107f360>] ? flush_kthread_worker+0x150/0x150
[ 62.769654] [<ffffffff81770bac>] ret_from_fork+0x7c/0xb0
[ 62.769656] [<ffffffff8107f360>] ? flush_kthread_worker+0x150/0x150
[ 62.769657] ---[ end trace 838756c62e156ffd ]---
[ 62.769724] device tap1 left promiscuous mode
This patch also affects moving devices between net namespaces.
OVS used to ignore netns move notifications which caused problems.
Like:
ovs-dpctl add-if test tap1
ip link set tap1 netns 3512
and then removing tap1 inside the namespace will cause hang on missing dev_put.
With this patch OVS will detach dev upon receiving netns move event.
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
|
|
Link upper device properly. That will make IFLA_MASTER filled up.
Set the master to port 0 of the datapath under which the port belongs.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Jesse Gross <jesse@nicira.com>
|
|
Add ovs tunnel interface for set tunnel action for userspace.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Following patch keeps skb->csum correct across ovs.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
|
|
Following patch changes vport->send return type so that vport
layer can do error accounting.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
|
|
The only user is get_dpifindex(), no need to redirect via the port
operations.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently OVS uses combination of genl and rtnl lock to protect
datapath state. This was done due to networking stack locking.
But this has complicated locking and there are few lock ordering
issues with new tunneling protocols.
Following patch simplifies locking by introducing new ovs mutex
and now this lock is used to protect entire ovs state.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
|
|
These comments are useless in upstream kernel.
Cc: David S. Miller <davem@davemloft.net>
Cc: Jesse Gross <jesse@nicira.com>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
|
|
The check for LRO packets was incorrectly put in the transmit path
instead of on receive. Since this check is supposed to protect OVS
(and other parts of the system) from packets that it cannot handle
it is obviously not useful on egress. Therefore, this commit moves
it back to the receive side.
The primary problem that this caused is upcalls to userspace tried
to segment the packet even though no segmentation information is
available. This would later cause NULL pointer dereferences when
skb_gso_segment() did nothing.
Signed-off-by: Jesse Gross <jesse@nicira.com>
|
|
Currently, each time a device is detached from an OVS datapath
we call synchronize RCU before freeing associated data structures.
However, if a bridge is deleted (which detaches all ports) when
many devices are connected then there can be a long delay. This
switches to use call_rcu() to group the cost together.
Reported-by: Justin Pettit <jpettit@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
|
|
If an attempt is made to transmit a packet that is over the device's
MTU then we log it using the datapath's name. However, it is much
more helpful to use the device name instead.
Signed-off-by: Jesse Gross <jesse@nicira.com>
|
|
Following patch adds support for network namespace to openvswitch.
Since it must release devices when namespaces are destroyed, a
side effect of this patch is that the module no longer keeps a
refcount but instead cleans up any state when it is unloaded.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitch
Jesse Gross says:
====================
A few bug fixes and small enhancements for net-next/3.6.
...
Ansis Atteka (1):
openvswitch: Do not send notification if ovs_vport_set_options() failed
Ben Pfaff (1):
openvswitch: Check gso_type for correct sk_buff in queue_gso_packets().
Jesse Gross (2):
openvswitch: Enable retrieval of TCP flags from IPv6 traffic.
openvswitch: Reset upper layer protocol info on internal devices.
Leo Alterman (1):
openvswitch: Fix typo in documentation.
Pravin B Shelar (1):
openvswitch: Check currect return value from skb_gso_segment()
Raju Subramanian (1):
openvswitch: Replace Nicira Networks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Standardize the net core ratelimited logging functions.
Coalesce formats, align arguments.
Change a printk then vprintk sequence to use printf extension %pV.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replaced all instances of Nicira Networks(, Inc) to Nicira, Inc.
Signed-off-by: Raju Subramanian <rsubramanian@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
|
|
Use of "unsigned int" is preferred to bare "unsigned" in net tree.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Open vSwitch is a multilayer Ethernet switch targeted at virtualized
environments. In addition to supporting a variety of features
expected in a traditional hardware switch, it enables fine-grained
programmatic extension and flow-based control of the network.
This control is useful in a wide variety of applications but is
particularly important in multi-server virtualization deployments,
which are often characterized by highly dynamic endpoints and the need
to maintain logical abstractions for multiple tenants.
The Open vSwitch datapath provides an in-kernel fast path for packet
forwarding. It is complemented by a userspace daemon, ovs-vswitchd,
which is able to accept configuration from a variety of sources and
translate it into packet processing rules.
See http://openvswitch.org for more information and userspace
utilities.
Signed-off-by: Jesse Gross <jesse@nicira.com>
|
