summaryrefslogtreecommitdiffstats
path: root/net/sunrpc/xprtrdma
AgeCommit message (Collapse)Author
2010-10-21sunrpc/xprtrdma: clean up workqueue usageTejun Heo
* Create and use svc_rdma_wq instead of using the system workqueue and flush_scheduled_work(). This workqueue is necessary to serve as flushing domain for rdma->sc_work which is used to destroy itself and thus can't be flushed explicitly. * Replace cancel_delayed_work() + flush_scheduled_work() with cancel_delayed_work_sync(). * Implement synchronous connect in xprt_rdma_connect() using flush_delayed_work() on the rdma_connect work instead of using flush_scheduled_work(). This is to prepare for the deprecation and removal of flush_scheduled_work(). Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-18svcrdma: Cleanup DMA unmapping in error paths.Tom Tucker
There are several error paths in the code that do not unmap DMA. This patch adds calls to svc_rdma_unmap_dma to free these DMA contexts. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-18svcrdma: Change DMA mapping logic to avoid the page_address kernel APITom Tucker
There was logic in the send path that assumed that a page containing data to send to the client has a KVA. This is not always the case and can result in data corruption when page_address returns zero and we end up DMA mapping zero. This patch changes the bus mapping logic to avoid page_address() where necessary and converts all calls from ib_dma_map_single to ib_dma_map_page in order to keep the map/unmap calls symmetric. Signed-off-by: Tom Tucker <tom@ogc.us> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-01sunrpc: Tag rpc_xprt with netPavel Emelyanov
The net is known from the xprt_create and this tagging will also give un the context in the conntection workers where real sockets are created. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-01sunrpc: Pull net argument downto svc_create_socketPavel Emelyanov
After this the socket creation in it knows the context. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-01sunrpc: Factor out rpc_xprt freeingPavel Emelyanov
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-01sunrpc: Factor out rpc_xprt allocationPavel Emelyanov
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-08-11rpcrdma: Fix SQ size calculation when memreg is FRMRTom Tucker
This patch updates the computation to include the worst case situation where three FRMR are required to map a single RPC REQ. Signed-off-by: Tom Tucker <tom@ogc.us> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-08-11xprtrdma: Do not truncate iova_start values in frmr registrations.Steve Wise
A bad cast causes the iova_start, which in this case is a 64b DMA bus address, to be truncated on 32b systems. This breaks frmrs on 32b systems. No cast is needed. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-05-19Merge branch 'for-2.6.35' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
* 'for-2.6.35' of git://linux-nfs.org/~bfields/linux: (45 commits) Revert "nfsd4: distinguish expired from stale stateids" nfsd: safer initialization order in find_file() nfs4: minor callback code simplification, comment NFSD: don't report compiled-out versions as present nfsd4: implement reclaim_complete nfsd4: nfsd4_destroy_session must set callback client under the state lock nfsd4: keep a reference count on client while in use nfsd4: mark_client_expired nfsd4: introduce nfs4_client.cl_refcount nfsd4: refactor expire_client nfsd4: extend the client_lock to cover cl_lru nfsd4: use list_move in move_to_confirmed nfsd4: fold release_session into expire_client nfsd4: rename sessionid_lock to client_lock nfsd4: fix bare destroy_session null dereference nfsd4: use local variable in nfs4svc_encode_compoundres nfsd: further comment typos sunrpc: centralise most calls to svc_xprt_received nfsd4: fix unlikely race in session replay case nfsd4: fix filehandle comment ...
2010-05-14SUNRPC: Move the task->tk_bytes_sent and tk_rtt to struct rpc_rqstTrond Myklebust
It seems strange to maintain stats for bytes_sent in one structure, and bytes received in another. Try to assemble all the RPC request-related stats in struct rpc_rqst Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-05-14SUNRPC: Fail over more quickly on connect errorsTrond Myklebust
We should not allow soft tasks to wait for longer than the major timeout period when waiting for a reconnect to occur. Remove the field xprt->connect_timeout since it has been obsoleted by xprt->reestablish_timeout. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-05-14SUNRPC: Move the test for XPRT_CONNECTING into xprt_connect()Trond Myklebust
This fixes a bug with setting xprt->stat.connect_start. Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-05-04Merge commit 'v2.6.34-rc6'J. Bruce Fields
Conflicts: fs/nfsd/nfs4callback.c
2010-05-03sunrpc: centralise most calls to svc_xprt_receivedNeil Brown
svc_xprt_received must be called when ->xpo_recvfrom has finished receiving a message, so that the XPT_BUSY flag will be cleared and if necessary, requeued for further work. This call is currently made in each ->xpo_recvfrom function, often from multiple different points. In each case it is the earliest point on a particular path where it is known that the protection provided by XPT_BUSY is no longer needed. However there are (still) some error paths which do not call svc_xprt_received, and requiring each ->xpo_recvfrom to make the call does not encourage robustness. So: move the svc_xprt_received call to be made just after the call to ->xpo_recvfrom(), and move it of the various ->xpo_recvfrom methods. This means that it may not be called at the earliest possible instant, but this is unlikely to be a measurable performance issue. Note that there are still other calls to svc_xprt_received as it is also needed when an xprt is newly created. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2010-04-12Merge branch 'for-2.6.34' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
* 'for-2.6.34' of git://linux-nfs.org/~bfields/linux: svcrdma: RDMA support not yet compatible with RPC6
2010-04-05svcrdma: RDMA support not yet compatible with RPC6Tom Tucker
RPC6 requires that it be possible to create endpoints that listen exclusively for IPv4 or IPv6 connection requests. This is not currently supported by the RDMA API. This fixes a server RDMA regression introduced by 37498292a "NFSD: Create PF_INET6 listener in write_ports". Signed-off-by: Tom Tucker<tom@opengridcomputing.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-08net/sunrpc: Convert (void)snprintf to snprintfJoe Perches
(Applies on top of "Remove uses of NIPQUAD, use %pI4") Casts to void of snprintf are most uncommon in kernel source. 9 use casts, 1301 do not. Remove the remaining uses in net/sunrpc/ Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08net/sunrpc: Remove uses of NIPQUAD, use %pI4Joe Perches
Originally submitted Jan 1, 2010 http://patchwork.kernel.org/patch/71221/ Convert NIPQUAD to the %pI4 format extension where possible Convert %02x%02x%02x%02x/NIPQUAD to %08x/ntohl Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits) tree-wide: fix misspelling of "definition" in comments reiserfs: fix misspelling of "journaled" doc: Fix a typo in slub.txt. inotify: remove superfluous return code check hdlc: spelling fix in find_pvc() comment doc: fix regulator docs cut-and-pasteism mtd: Fix comment in Kconfig doc: Fix IRQ chip docs tree-wide: fix assorted typos all over the place drivers/ata/libata-sff.c: comment spelling fixes fix typos/grammos in Documentation/edac.txt sysctl: add missing comments fs/debugfs/inode.c: fix comment typos sgivwfb: Make use of ARRAY_SIZE. sky2: fix sky2_link_down copy/paste comment error tree-wide: fix typos "couter" -> "counter" tree-wide: fix typos "offest" -> "offset" fix kerneldoc for set_irq_msi() spidev: fix double "of of" in comment comment typo fix: sybsystem -> subsystem ...
2009-12-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1815 commits) mac80211: fix reorder buffer release iwmc3200wifi: Enable wimax core through module parameter iwmc3200wifi: Add wifi-wimax coexistence mode as a module parameter iwmc3200wifi: Coex table command does not expect a response iwmc3200wifi: Update wiwi priority table iwlwifi: driver version track kernel version iwlwifi: indicate uCode type when fail dump error/event log iwl3945: remove duplicated event logging code b43: fix two warnings ipw2100: fix rebooting hang with driver loaded cfg80211: indent regulatory messages with spaces iwmc3200wifi: fix NULL pointer dereference in pmkid update mac80211: Fix TX status reporting for injected data frames ath9k: enable 2GHz band only if the device supports it airo: Fix integer overflow warning rt2x00: Fix padding bug on L2PAD devices. WE: Fix set events not propagated b43legacy: avoid PPC fault during resume b43: avoid PPC fault during resume tcp: fix a timewait refcnt race ... Fix up conflicts due to sysctl cleanups (dead sysctl_check code and CTL_UNNUMBERED removed) in kernel/sysctl_check.c net/ipv4/sysctl_net_ipv4.c net/ipv6/addrconf.c net/sctp/sysctl.c
2009-12-04tree-wide: fix assorted typos all over the placeAndré Goddard Rosa
That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-11-29net: Move && and || to end of previous lineJoe Perches
Not including net/atm/ Compiled tested x86 allyesconfig only Added a > 80 column line or two, which I ignored. Existing checkpatch plaints willfully, cheerfully ignored. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-18sysctl: Drop & in front of every proc_handler.Eric W. Biederman
For consistency drop & in front of every proc_handler. Explicity taking the address is unnecessary and it prevents optimizations like stubbing the proc_handlers to NULL. Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Joe Perches <joe@perches.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2009-11-12sysctl net: Remove unused binary sysctl codeEric W. Biederman
Now that sys_sysctl is a compatiblity wrapper around /proc/sys all sysctl strategy routines, and all ctl_name and strategy entries in the sysctl tables are unused, and can be revmoed. In addition neigh_sysctl_register has been modified to no longer take a strategy argument and it's callers have been modified not to pass one. Cc: "David Miller" <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: netdev@vger.kernel.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2009-10-11headers: remove sched.h from interrupt.hAlexey Dobriyan
After m68k's task_thread_info() doesn't refer to current, it's possible to remove sched.h from interrupt.h and not break m68k! Many thanks to Heiko Carstens for allowing this. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-09-24sysctl: remove "struct file *" argument of ->proc_handlerAlexey Dobriyan
It's unused. It isn't needed -- read or write flag is already passed and sysctl shouldn't care about the rest. It _was_ used in two places at arch/frv for some reason. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-21Merge branch 'nfs-for-2.6.32' of ↵J. Bruce Fields
git://git.linux-nfs.org/projects/trondmy/nfs-2.6 into for-2.6.32-incoming Conflicts: net/sunrpc/cache.c
2009-08-09SUNRPC: Kill RPC_DISPLAY_ALLChuck Lever
At some point, I recall that rpc_pipe_fs used RPC_DISPLAY_ALL. Currently there are no uses of RPC_DISPLAY_ALL outside the transport modules themselves, so we can safely get rid of it. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09SUNRPC: Use rpc_ntop() for constructing transport address stringsChuck Lever
Clean up: In addition to using the new generic rpc_ntop() and rpc_get_port() functions, have the RPC client compute the presentation address buffer sizes dynamically using kstrdup(). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09SUNRPC: Remove duplicate universal address generationChuck Lever
RPC universal address generation is currently done in several places: rpcb_clnt.c, nfs4proc.c xprtsock.c, and xprtrdma.c. Remove the redundant cases that convert a socket address to a universal address. The nfs4proc.c case takes a pre-formatted presentation address string, not a socket address, so we'll leave that one. Because the new uaddr constructor uses the recently introduced rpc_ntop(), it now supports proper "::" shorthanding for IPv6 addresses. This allows the kernel to register properly formed universal addresses with the local rpcbind service, in _all_ cases. The kernel can now also send properly formed universal addresses in RPCB_GETADDR requests, and support link-local properly when encoding and decoding IPv6 addresses. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-07-03svcrdma: fix error handling of rdma_alloc_frmr()Wei Yongjun
ib_alloc_fast_reg_mr() and ib_alloc_fast_reg_page_list() returns ERR_PTR() and not NULL. Compile tested only. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-06-15sunrpc: potential memory leak in function rdma_read_xdrChristian Engelmayer
In case the check on ch_count fails the cleanup path is skipped and the previously allocated memory 'rpl_map', 'chl_map' is not freed. Reported by Coverity. Signed-off-by: Christian Engelmayer <christian.engelmayer@frequentis.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-05-29Merge branch 'for-2.6.30' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
* 'for-2.6.30' of git://linux-nfs.org/~bfields/linux: svcrdma: dma unmap the correct length for the RPCRDMA header page. nfsd: Revert "svcrpc: take advantage of tcp autotuning" nfsd: fix hung up of nfs client while sync write data to nfs server
2009-05-27svcrdma: dma unmap the correct length for the RPCRDMA header page.Steve Wise
The svcrdma module was incorrectly unmapping the RPCRDMA header page. On IBM pserver systems this causes a resource leak that results in running out of bus address space (10 cthon iterations will reproduce it). The code was mapping the full page but only unmapping the actual header length. The fix is to only map the header length. I also cleaned up the use of ib_dma_map_page() calls since the unmap logic always uses ib_dma_unmap_single(). I made these symmetrical. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-05-26XPRTRDMA: fix client rpcrdma FRMR registration on mlx4 devicesVu Pham
mlx4/connectX FRMR requires local write enable together with remote rdma write enable. This fixes NFS/RDMA operation over the ConnectX Infiniband HCA in the default memreg mode. Signed-off-by: Vu Pham <vu@mellanox.com> Signed-off-by: Tom Talpey <tmtalpey@gmail.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-05-03svcrdma: clean up error paths.Steve Wise
These fixes resolved crashes due to resource leak BUG_ON checks. The resource leaks were detected by introducing asynchronous transport errors. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-25svcrdma: Fix dma map direction for rdma read targetsSteve Wise
The nfs server rdma transport was mapping rdma read target pages for TO_DEVICE instead of FROM_DEVICE. This causes data corruption on non cache-coherent systems if frmrs are used. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-03-19SVCRDMA: fix recent printk format warnings.Tom Talpey
printk formats in prior commit were reversed/incorrect. Compiled without warning on x86 and x86_64, but detected on ppc. Signed-off-by: Tom Talpey <tmtalpey@gmail.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-11XPRTRDMA: correct an rpc/rdma inline send marshaling errorTom Talpey
Certain client rpc's which contain both lengthy page-contained metadata and a non-empty xdr_tail buffer require careful handling to avoid overlapped memory copying. Rearranging of existing rpcrdma marshaling code avoids it; this fixes an NFSv4 symlink creation error detected with connectathon basic/test8 to multiple servers. Signed-off-by: Tom Talpey <tmtalpey@gmail.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-11SVCRDMA: remove faulty assertions in rpc/rdma chunk validation.Tom Talpey
Certain client-provided RPCRDMA chunk alignments result in an additional scatter/gather entry, which triggered nfs/rdma server assertions incorrectly. OpenSolaris nfs/rdma client connectathon testing was blocked by these in the special/locking section. Signed-off-by: Tom Talpey <tmtalpey@gmail.com> Cc: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-12-14rpc/rdma: goto instead of copypasteIlpo Järvinen
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-10net: Make staticRoel Kluin
Sparse asked whether these could be static. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25sunrpc: fix warning in net/sunrpc/xprtrdma/verbs.cIngo Molnar
fix this warning: net/sunrpc/xprtrdma/verbs.c: In function ‘rpcrdma_conn_upcall’: net/sunrpc/xprtrdma/verbs.c:279: warning: unused variable ‘addr’ Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25sunrpc: fix warning in net/sunrpc/xprtrdma/svc_rdma_transport.cIngo Molnar
this warning: net/sunrpc/xprtrdma/svc_rdma_transport.c: In function ‘svc_rdma_accept’: net/sunrpc/xprtrdma/svc_rdma_transport.c:830: warning: ‘dma_mr_acc’ may be used uninitialized in this function triggers because GCC does not recognize the (correct) flow connection between need_dma_mr and dma_mr_acc. Annotate it. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-31net: replace NIPQUAD() in net/*/Harvey Harrison
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u can be replaced with %pI4 Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-15Merge branch 'next'Trond Myklebust
2008-10-14Merge branch 'for-2.6.28' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
* 'for-2.6.28' of git://linux-nfs.org/~bfields/linux: (59 commits) svcrdma: Fix IRD/ORD polarity svcrdma: Update svc_rdma_send_error to use DMA LKEY svcrdma: Modify the RPC reply path to use FRMR when available svcrdma: Modify the RPC recv path to use FRMR when available svcrdma: Add support to svc_rdma_send to handle chained WR svcrdma: Modify post recv path to use local dma key svcrdma: Add a service to register a Fast Reg MR with the device svcrdma: Query device for Fast Reg support during connection setup svcrdma: Add FRMR get/put services NLM: Remove unused argument from svc_addsock() function NLM: Remove "proto" argument from lockd_up() NLM: Always start both UDP and TCP listeners lockd: Remove unused fields in the nlm_reboot structure lockd: Add helper to sanity check incoming NOTIFY requests lockd: change nlmclnt_grant() to take a "struct sockaddr *" lockd: Adjust nlmsvc_lookup_host() to accomodate AF_INET6 addresses lockd: Adjust nlmclnt_lookup_host() signature to accomodate non-AF_INET lockd: Support non-AF_INET addresses in nlm_lookup_host() NLM: Convert nlm_lookup_host() to use a single argument svcrdma: Add Fast Reg MR Data Types ...
2008-10-10RPC/RDMA: ensure connection attempt is complete before signalling.Tom Talpey
The RPC/RDMA connection logic could return early from reconnection attempts, leading to additional spurious retries. Signed-off-by: Tom Talpey <talpey@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>