Age | Commit message (Collapse) | Author |
|
This patch eliminates an unneeded parameter when creating a low-level
TIPC port object. Instead of returning both the pointer to the port
structure and the port's reference ID, it now returns only the pointer
since the port structure contains the reference ID as one of its fields.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, we are trying to place the information from the kernel to
1, 2, 3 and 4 pages sequentially. These pages are allocated via slab.
Though, from the slab point of view steps 3 and 4 are equivalent on
most architectures. So, lets skip 3 pages attempt.
By the way, should we switch from .doit to .dumpit interface here?
The amount of data seems quite big for me.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch removes references in drivers/net/wan/Kconfig and
net/wanrouter/Kconfig to Documentation/networking/wan-router.txt
which was removed in commit 99971e70fdc1862e120f3319fc0a4dba8c728acf
("[WANPIPE]: Forgotten bits of Sangoma drivers removal.").
Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dev_set_promiscuity/allmulti might overflow.
Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes
dev_set_promiscuity/allmulti return error number if overflow happened.
Here, we check all positive increment for promiscuity and allmulti
to get error return.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
An oops happens during device unregister.
The following oops happened when I add two tunnels, which
use a same device, and then delete one tunnel.
Obviously deleting tunnel "A" causes device unregister, which
send a notification, and after receiving notification, ipmr do
unregister again for tunnel "B" which also use same device.
That is wrong.
After receiving notification, ipmr only needs to decrease reference
count and don't do duplicated unregister.
Fortunately, IPv6 side doesn't add tunnel in ip6mr, so it's clean.
This patch fixs:
- unregister device oops
- using after dev_put()
Here is the oops:
===
Jul 11 15:39:29 wangchen kernel: ------------[ cut here ]------------
Jul 11 15:39:29 wangchen kernel: kernel BUG at net/core/dev.c:3651!
Jul 11 15:39:29 wangchen kernel: invalid opcode: 0000 [#1]
Jul 11 15:39:29 wangchen kernel: Modules linked in: ipip tunnel4 nfsd lockd nfs_acl auth_rpcgss sunrpc exportfs ipv6 snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device af_packet binfmt_misc button battery ac loop dm_mod usbhid ff_memless pcmcia firmware_class ohci1394 8139too mii ieee1394 yenta_socket rsrc_nonstatic pcmcia_core ide_cd_mod cdrom snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm i2c_i801 snd_timer snd i2c_core soundcore snd_page_alloc rng_core shpchp ehci_hcd uhci_hcd pci_hotplug intel_agp agpgart usbcore ext3 jbd ata_piix ahci libata dock edd fan thermal processor thermal_sys piix sd_mod scsi_mod ide_disk ide_core [last unloaded: freq_table]
Jul 11 15:39:29 wangchen kernel:
Jul 11 15:39:29 wangchen kernel: Pid: 4102, comm: mroute Not tainted (2.6.26-rc9-default #69)
Jul 11 15:39:29 wangchen kernel: EIP: 0060:[<c024636b>] EFLAGS: 00010202 CPU: 0
Jul 11 15:39:29 wangchen kernel: EIP is at rollback_registered+0x61/0xe3
Jul 11 15:39:29 wangchen kernel: EAX: 00000001 EBX: ecba6000 ECX: 00000000 EDX: ffffffff
Jul 11 15:39:29 wangchen kernel: ESI: 00000001 EDI: ecba6000 EBP: c03de2e8 ESP: ed8e7c3c
Jul 11 15:39:29 wangchen kernel: DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
Jul 11 15:39:29 wangchen kernel: Process mroute (pid: 4102, ti=ed8e6000 task=ed41e830 task.ti=ed8e6000)
Jul 11 15:39:29 wangchen kernel: Stack: ecba6000 c024641c 00000028 c0284e1a 00000001 c03de2e8 ecba6000 eecff360
Jul 11 15:39:29 wangchen kernel: c0284e4c c03536f4 fffffff8 00000000 c029a819 ecba6000 00000006 ecba6000
Jul 11 15:39:29 wangchen kernel: 00000000 ecba6000 c03de2c0 c012841b ffffffff 00000000 c024639f ecba6000
Jul 11 15:39:29 wangchen kernel: Call Trace:
Jul 11 15:39:29 wangchen kernel: [<c024641c>] unregister_netdevice+0x2f/0x51
Jul 11 15:39:29 wangchen kernel: [<c0284e1a>] vif_delete+0xaf/0xc3
Jul 11 15:39:29 wangchen kernel: [<c0284e4c>] ipmr_device_event+0x1e/0x30
Jul 11 15:39:29 wangchen kernel: [<c029a819>] notifier_call_chain+0x2a/0x47
Jul 11 15:39:29 wangchen kernel: [<c012841b>] raw_notifier_call_chain+0x9/0xc
Jul 11 15:39:29 wangchen kernel: [<c024639f>] rollback_registered+0x95/0xe3
Jul 11 15:39:29 wangchen kernel: [<c024641c>] unregister_netdevice+0x2f/0x51
Jul 11 15:39:29 wangchen kernel: [<c0284e1a>] vif_delete+0xaf/0xc3
Jul 11 15:39:29 wangchen kernel: [<c0285eee>] ip_mroute_setsockopt+0x47a/0x801
Jul 11 15:39:29 wangchen kernel: [<eea5a70c>] do_get_write_access+0x2df/0x313 [jbd]
Jul 11 15:39:29 wangchen kernel: [<c01727c4>] __find_get_block_slow+0xda/0xe4
Jul 11 15:39:29 wangchen kernel: [<c0172a7f>] __find_get_block+0xf8/0x122
Jul 11 15:39:29 wangchen kernel: [<c0172a7f>] __find_get_block+0xf8/0x122
Jul 11 15:39:29 wangchen kernel: [<eea5d563>] journal_cancel_revoke+0xda/0x110 [jbd]
Jul 11 15:39:29 wangchen kernel: [<c0263501>] ip_setsockopt+0xa9/0x9ee
Jul 11 15:39:29 wangchen kernel: [<eea5d563>] journal_cancel_revoke+0xda/0x110 [jbd]
Jul 11 15:39:29 wangchen kernel: [<eea5a70c>] do_get_write_access+0x2df/0x313 [jbd]
Jul 11 15:39:29 wangchen kernel: [<eea69287>] __ext3_get_inode_loc+0xcf/0x271 [ext3]
Jul 11 15:39:29 wangchen kernel: [<eea743c7>] __ext3_journal_dirty_metadata+0x13/0x32 [ext3]
Jul 11 15:39:29 wangchen kernel: [<c0116434>] __wake_up+0xf/0x15
Jul 11 15:39:29 wangchen kernel: [<eea5a424>] journal_stop+0x1bd/0x1c6 [jbd]
Jul 11 15:39:29 wangchen kernel: [<eea703a7>] __ext3_journal_stop+0x19/0x34 [ext3]
Jul 11 15:39:29 wangchen kernel: [<c014291e>] get_page_from_freelist+0x94/0x369
Jul 11 15:39:29 wangchen kernel: [<c01408f2>] filemap_fault+0x1ac/0x2fe
Jul 11 15:39:29 wangchen kernel: [<c01a605e>] security_sk_alloc+0xd/0xf
Jul 11 15:39:29 wangchen kernel: [<c023edea>] sk_prot_alloc+0x36/0x78
Jul 11 15:39:29 wangchen kernel: [<c0240037>] sk_alloc+0x3a/0x40
Jul 11 15:39:29 wangchen kernel: [<c0276062>] raw_hash_sk+0x46/0x4e
Jul 11 15:39:29 wangchen kernel: [<c0166aff>] d_alloc+0x1b/0x157
Jul 11 15:39:29 wangchen kernel: [<c023e4d1>] sock_common_setsockopt+0x12/0x16
Jul 11 15:39:29 wangchen kernel: [<c023cb1e>] sys_setsockopt+0x6f/0x8e
Jul 11 15:39:29 wangchen kernel: [<c023e105>] sys_socketcall+0x15c/0x19e
Jul 11 15:39:29 wangchen kernel: [<c0103611>] sysenter_past_esp+0x6a/0x99
Jul 11 15:39:29 wangchen kernel: [<c0290000>] unix_poll+0x69/0x78
Jul 11 15:39:29 wangchen kernel: =======================
Jul 11 15:39:29 wangchen kernel: Code: 83 e0 01 00 00 85 c0 75 1f 53 53 68 12 81 31 c0 e8 3c 30 ed ff ba 3f 0e 00 00 b8 b9 7f 31 c0 83 c4 0c 5b e9 f5 26 ed ff 48 74 04 <0f> 0b eb fe 89 d8 e8 21 ff ff ff 89 d8 e8 62 ea ff ff c7 83 e0
Jul 11 15:39:29 wangchen kernel: EIP: [<c024636b>] rollback_registered+0x61/0xe3 SS:ESP 0068:ed8e7c3c
Jul 11 15:39:29 wangchen kernel: ---[ end trace c311acf85d169786 ]---
===
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
allmulti might overflow.
Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes
dev_set_promiscuity/allmulti return error number if overflow happened.
Here, we check the positive increment for allmulti to get error return.
PS: For unwinding tunnel creating, we let ipip->ioctl() to handle it.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Patrick McHardy pointed it out.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
allmulti might overflow.
Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes
dev_set_promiscuity/allmulti return error number if overflow happened.
Here, we check the positive increment for allmulti to get error return.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dev_set_promiscuity/allmulti might overflow.
Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes
dev_set_promiscuity/allmulti return error number if overflow happened.
Here, we check the positive increment for promiscuity to get error return.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dev_set_promiscuity/allmulti might overflow. Commit: "netdevice: Fix
promiscuity and allmulti overflow" in net-next makes
dev_set_promiscuity/allmulti return error number if overflow happened.
In af_packet, we check all positive increment for promiscuity and
allmulti to get error return.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
|
|
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
net/netfilter/nf_conntrack_proto_tcp.c
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch avoids adding STAs that don't belong to our IBSS
ieee80211_bssid_match matches also bcast address so also APs
were added
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Multiple issues:
- there are no "default" values needed
- cw_min/cw_max can be larger than documented
- restructure to decrease size
- use get_unaligned_le16
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
This patch makes mac80211 assign proper sequence numbers to
QoS-data frames. It also removes the old sequence number code
because we noticed that only the driver or hardware can assign
sequence numbers to non-QoS-data and especially management
frames in a race-free manner because beacons aren't passed
through mac80211's TX path.
This patch also adds temporary code to the rt2x00 drivers to
not break them completely, that code will have to be reworked
for proper sequence numbers on beacons.
It also moves sequence number assignment down in the TX path
so no sequence numbers are assigned to frames that are dropped.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
The /sys/class/net/*/wireless/ direcory is, as far as I know, not
used by anyone. Additionally, the same data is available via wext
ioctls. Hence the sysfs files are pretty much useless. This patch
makes them optional and schedules them for removal.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Jean Tourrilhes <jt@hpl.hp.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
According to 802.11-2007, we are doing the wrong thing in the
sequence number checks when receiving frames. This fixes it.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
This patch fixes the check at the entrance to ieee80211_rx_reorder_ampdu.
This check has been broken by 'mac80211: rx.c use new helpers'.
Letting QoS NULL packet in ieee80211_rx_reorder_ampdu led to packet loss in
RX.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
This patch changes mac80211's beacon configuration handling
to never pass skbs to the driver directly but rather always
require the driver to use ieee80211_beacon_get(). Additionally,
it introduces "change flags" on the config_interface() call
to enable drivers to figure out what is changing. Finally, it
removes the beacon_update() driver callback in favour of
having IBSS beacon delivered by ieee80211_beacon_get() as well.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
This patch pushes the "netif_running()" and "same type as before"
checks down into ieee80211_if_change_type() to centralise the
logic instead of duplicating it for cfg80211 and wext.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
This patch revamps the virtual interface handling and makes the
code much easier to follow. Fewer functions, better names, less
spaghetti code.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Currently, almost every interface type has a 'bss' pointer
pointing to BSS information. This BSS information, however,
is for a _local_ BSS, not for the BSS we joined, so having
it on a STA mode interface makes little sense, but now they
have it pointing to the master device, which is an AP mode
virtual interface. However, except for some bitrate control
data, this pointer is only used in AP/VLAN modes (for power
saving stations.)
Overall, it is not necessary to even have the master netdev
be a valid virtual interface, and it doesn't have to be on
the list of interfaces either.
This patch changes the master netdev to be special, it now
- no longer is on the list of virtual interfaces, which
lets me remove a lot of tests for that
- no longer has sub_if_data attached, since that isn't used
Additionally, this patch changes some vlan/ap mode handling
that is related to these 'bss' pointers described above (but
in the VLAN case they actually make sense because there they
point to the AP they belong to); it also adds some debugging
code to IEEE80211_DEV_TO_SUB_IF to validate it is not called
on the master netdev any more.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
This patch implements the power management routines wireless extensions
for mac80211.
For now we only support switching PS mode between on and off.
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
This corrects an error in the computation of the open loss interval I_0:
* the interval length is (highest_seqno - start_seqno) + 1
* and not (highest_seqno - start_seqno).
This condition was not fully clear in RFC 3448, but reflects the current
revision state of rfc3448bis and is also consistent with RFC 4340, 6.1.1.
Further changes:
----------------
* variable renamed due to line length constraints;
* explicit typecast to `s64' to avoid implicit signed/unsigned casting.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
|
|
This fixes a bug in the logic of the TFRC loss detection:
* new_loss_indicated() should not be called while a loss is pending;
* but the code allows this;
* thus, for two subsequent gaps in the sequence space, when loss_count
has not yet reached NDUPACK=3, the loss_count is falsely reduced to 1.
To avoid further and similar problems, all loss handling and loss detection is
now done inside tfrc_rx_hist_handle_loss(), using an appropriate routine to
track new losses.
Further changes:
----------------
* added a reminder that no RX history operations should be performed when
rx_handle_loss() has identified a (new) loss, since the function takes
care of packet reordering during loss detection;
* made tfrc_rx_hist_loss_pending() bool (thanks to an earlier suggestion
by Arnaldo);
* removed unused functions.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
|
|
RFC 4340, 7.7 specifies up to 6 bytes for the NDP Count option, whereas the code
is currently limited to up to 3 bytes. This seems to be a relict of an earlier
draft version and is brought up to date by the patch.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
|
|
The TFRC loss detection code used the wrong loss condition (RFC 4340, 7.7.1):
* the difference between sequence numbers s1 and s2 instead of
* the number of packets missing between s1 and s2 (one less than the distance).
Since this condition appears in many places of the code, it has been put into a
separate function, dccp_loss_free().
Further changes:
----------------
* tidied up incorrect typing (it was using `int' for u64/s64 types);
* optimised conditional statements for common case of non-reordered packets;
* rewrote comments/documentation to match the changes.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
|
|
Add a XFRM_STATE_AF_UNSPEC flag to handle the AF_UNSPEC behavior for
the selector family. Userspace applications can set this flag to leave
the selector family of the xfrm_state unspecified. This can be used
to to handle inter family tunnels if the selector is not set from
userspace.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Denis V. Lunev <den@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
So, no need to kfree_skb here on the error path. In this case we can
simply return.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In commit a07f5f508a4d9728c8e57d7f66294bf5b254ff7f "[IPV4] fib_trie: style
cleanup", the changes to check_leaf() and fn_trie_lookup() were wrong - where
fn_trie_lookup() would previously return a negative error value from
check_leaf(), it now returns 0.
Now fn_trie_lookup() doesn't appear to care about plen, so we can revert
check_leaf() to returning the error value.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Tested-by: William Boughton <bill@boughton.de>
Acked-by: Stephen Heminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
kcalloc is supposed to be called with the count as its first argument and
the element size as the second.
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
|
|
Fix a range check in netfilter IP NAT for SNMP to always use a big enough size
variable that the compiler won't moan about comparing it to ULONG_MAX/8 on a
64-bit platform.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a conntrack entry is destroyed in process context and destruction
is interrupted by packet processing and the packet is an attempt to
reopen a closed connection, TCP conntrack tries to kill the old entry
itself and returns NF_REPEAT to pass the packet through the hook
again. This may lead to an endless loop: TCP conntrack repeatedly
finds the old entry, but can not kill it itself since destruction
is already in progress, but destruction in process context can not
complete since TCP conntrack is keeping the CPU busy.
Drop the packet in TCP conntrack if we can't kill the connection
ourselves to avoid this.
Reported by: hemao77@gmail.com [ Kernel bugzilla #11058 ]
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This removes the fast_start parameter from the rc_pid parameters
information and instead uses the parameter macro when initializing
the rc_pid state. Since the parameter is only used on initialization,
there is no point of making exporting it via debugfs. This also fixes
uninitialized memory references to the fast_start and norm_offset
parameters detected by the kmemcheck utility. Thanks to Vegard Nossum
for reporting the bug.
Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Multiple TX queue support is a core networking feature.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Accesses are mostly structured such that when there are multiple TX
queues the code transformations will be a little bit simpler.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This allows us to use this calling convention all the way down into
qdisc_restart().
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Only plain netif_schedule() remains taking a net_device, mostly as a
compatability item while we transition the rest of these interfaces.
Everything else calls netif_schedule_queue() or __netif_schedule(),
both of which take a netdev_queue pointer.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Accomplish this by using local variables.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This indicates if the NOOP scheduler is what is active for TX on a
given device.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
First, we add a qdisc_tx_changing() helper which returns true if the
qdisc attachment is in transition.
Second, we remove an assertion warning which is of limited value and
is hard to express precisely in a multiqueue environment.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We schedule queues, not the device, for output queue processing in BH.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It just wants the root qdisc given an arbitrary qdisc,
and that is simply qdisc->dev_queue->qdisc
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
|