summaryrefslogtreecommitdiffstats
path: root/net
AgeCommit message (Collapse)Author
2011-04-13mac80211: receive EAP frames from a station in an AP VLAN on the main APFelix Fietkau
This makes it easier to handle moving stations to VLAN interfaces that are part of a different bridge. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-12{mac|nl}80211: Add station connected timeMohammed Shafi Shajakhan
Add station connected time in debugfs. This will be helpful to get a measure of stability of the connection and for debugging stress issues Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-12mac80211: send notification on new peer candidate for our secure meshJavier Cardona
Also, advertise support for mesh authentication. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-12nl80211: New notification to discover mesh peer candidates.Javier Cardona
Notify userspace when a beacon/presp is received from a suitable mesh peer candidate for whom no sta information exists. Userspace can then decide to create a sta info for the candidate. If userspace is not ready to authenticate the peer right away, it can create the sta info with the authenticated flag unset and set it later. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-12nl80211/mac80211: Perform PLINK_ACTION on new stationJavier Cardona
Modify the NEW_STATION command to accept PLINK_ACTIONS, in case userspace wants to create stations and initiate a peer link right away (for authenticated stations) or create a blocked station (for debugging). Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-12mac80211: ignore peer link requests from unauthenticated stations.Javier Cardona
Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-12mac80211: Let user space receive and send mesh auth/deauth framesJavier Cardona
Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-12nl80211/mac80211: let userspace authenticate stationsJavier Cardona
Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-12mac80211: ignore peers if security is enabled for this meshJavier Cardona
Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-12cfg80211/nl80211: Add userspace authentication flag to mesh setupJavier Cardona
During mesh setup, use NL80211_MESH_SETUP_USERSPACE_AUTH flag to create a secure mesh and route management frames to userspace. Also, NL80211_CMD_GET_WIPHY now returns a flag NL80211_SUPPORT_MESH_AUTH if the wiphy's mesh implementation supports routing of mesh auth frames to userspace. This is useful for forward compatibility between old kernels and new userspace tools. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-12nl80211: rename NL80211_MESH_SETUP_VENDOR_PATH_SEL_IEJavier Cardona
To NL80211_MESH_SETUP_IE. This reflects our ability to insert any ie into a mesh beacon, not simply path selection ies. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-12mac80211: Check for queued frames before entering power save.Vivek Natarajan
In a highly noisy environment, the tx rate of the driver drops and the application slows down since it has not yet received ACKs for the frames already queued in the hardware. Since this ACK may take more than 100ms, stopping the dev queues for entering PS at this stage breaks applications, WMM test cases in my testing. If there are frames already pending in the tx queue, postponing the PS logic helps to avoid redundant queue stops. When power save is enabled by default and in a noisy environment, this API certainly helps in improving the average throughput. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: drivers/net/wireless/rtlwifi/efuse.c drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c net/bluetooth/mgmt.c
2011-04-07cfg80211: add a timer for invalid user reg hintsLuis R. Rodriguez
We have no other option but to inform userspace that we have queued up their regulatory hint request when we are given one given that nl80211 operates atomically on user requests. The best we can do is accept the request, and add a delayed work item for processing failure and cancel it if we succeeed. Upon failure we restore the regulatory settings and ignore the user input. This fixes this reported bug: https://bugzilla.kernel.org/show_bug.cgi?id=28112 Reported-by: gregoryx.alagnou@intel.com Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07cfg80211: fix regulatory restore upon user hintsLuis R. Rodriguez
When we restore regulatory settings its possible CRDA will not reply because of a bogus user entry. In this case the bogus entry will prevent any further processing on cfg80211 for regulatory domains even if we restore regulatory settings. To prevent this we suck out all pending requests when restoring regulatory settings and add them back into the queue after we have queued up the reset work. The impact of not having this applied is that a user with privileges can issue a userspace regulatory hint while we are disasocciating and this would prevent any further processing of regulatory domains. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07mac80211: remove few obsolete flagsMohammed Shafi Shajakhan
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07nl80211: Add BSS parameters to stationPaul Stewart
This allows user-space monitoring of BSS parameters for the associated station. This is useful for debugging and verifying that the paramaters are as expected. [Exactly the same as before but bundled into a single message] Signed-off-by: Paul Stewart <pstew@chromium.org> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-next-2.6
2011-04-05Bluetooth: convert net/bluetooth/ to kstrtoxAlexey Dobriyan
Convert from strict_strto*() interfaces to kstrto*() interfaces. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-05Bluetooth: Use GFP_KERNEL in user contextGustavo F. Padovan
The allocation in mgmt_control() code are in user context and not locked by any spinlock, so it's not recommended the use of GFP_ATOMIC there. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-05Bluetooth: Don't use spin_lock_bh in user contextGustavo F. Padovan
spin_lock() and spin_unlock() are more apropiated for user context. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-05Bluetooth: Use kthread API in cmtpSzymon Janc
kernel_thread() is a low-level implementation detail and EXPORT_SYMBOL(kernel_thread) is scheduled for removal. Use the <linux/kthread.h> API instead. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-05Bluetooth: Use kthread API in bnepSzymon Janc
kernel_thread() is a low-level implementation detail and EXPORT_SYMBOL(kernel_thread) is scheduled for removal. Use the <linux/kthread.h> API instead. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-05Bluetooth: Use kthread API in hidpSzymon Janc
kernel_thread() is a low-level implementation detail and EXPORT_SYMBOL(kernel_thread) is scheduled for removal. Use the <linux/kthread.h> API instead. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-04Bluetooth: Add mgmt_remote_name eventJohan Hedberg
This patch adds a new remote_name event to the Management interface which is sent every time the name of a remote device is resolved (over BR/EDR). Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-04Bluetooth: Add mgmt_device_found eventJohan Hedberg
This patch adds a device_found event to the Management interface. For now the event only maps to BR/EDR inquiry result HCI events, but in the future the plan is to also use it for the LE device discovery process. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-04Bluetooth: Remove gfp_mask param from hci_reassembly()Gustavo F. Padovan
It is unnecessary, once we are always in interrupt context. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-04mac80211: clean up station cleanup timerJohannes Berg
We currently run this timer exactly once when a new mac80211 device is registered, but that is completely pointless since it will have no work to do at all. Therefore, remove that and also simplify some code using the timer. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04mac80211: remove the dependency on crypto_blkcipherFelix Fietkau
The only thing that using crypto_blkcipher with ecb does over just using arc4 directly is wrapping the encrypt/decrypt function into a for loop, looping over each individual character. To be able to do this, it pulls in around 40 kb worth of unnecessary kernel modules (at least on a MIPS embedded device). Using arc4 directly not only eliminates those dependencies, it also makes the code smaller. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04mac80211: fix suppressing probe responses in ad-hoc modeFelix Fietkau
The commit "mac80211: reply to directed probes in IBSS" changed ad-hoc specific code to respond to unicast probe requests, even if drv_tx_last_beacon returns false, however due to confusion over the meaning of the IEEE80211_RX_RA_MATCH flag, it also unconditionally enabled responding to multicast probe requests. Fix this by explicitly checking for a multicast destination address instead. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04wifi: Add hwflags to debugfs.Ben Greear
Aids debugging wifi behaviour. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04mac80211: Fix duplicate frames on cooked monitorHelmut Schaa
Cleaning the ieee80211_rx_data.flags field here is wrong, instead the flags should be valid accross processing the frame on different interfaces. Fix this by removing the incorrect flags=0 assignment. Introduced in commit 554891e63a29af35cc6bb403ef34e319518114d0 (mac80211: move packet flags into packet). Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-01tcp: len check is unnecessarily devastating, change to WARN_ONIlpo Järvinen
All callers are prepared for alloc failures anyway, so this error can safely be boomeranged to the callers domain without super bad consequences. ...At worst the connection might go into a state where each RTO tries to (unsuccessfully) re-fragment with such a mis-sized value and eventually dies. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-01sctp: malloc enough room for asconf-ack chunkWei Yongjun
Sometime the ASCONF_ACK parameters can equal to the fourfold of ASCONF parameters, this only happend in some special case: ASCONF parameter is : Unrecognized Parameter (4 bytes) ASCONF_ACK parameter should be: Error Cause Indication parameter (8 bytes header) + Error Cause (4 bytes header) + Unrecognized Parameter (4bytes) Four 4bytes Unrecognized Parameters in ASCONF chunk will cause panic. Pid: 0, comm: swapper Not tainted 2.6.38-next+ #22 Bochs Bochs EIP: 0060:[<c0717eae>] EFLAGS: 00010246 CPU: 0 EIP is at skb_put+0x60/0x70 EAX: 00000077 EBX: c09060e2 ECX: dec1dc30 EDX: c09469c0 ESI: 00000000 EDI: de3c8d40 EBP: dec1dc58 ESP: dec1dc2c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process swapper (pid: 0, ti=dec1c000 task=c09aef20 task.ti=c0980000) Stack: c09469c0 e1894fa4 00000044 00000004 de3c8d00 de3c8d00 de3c8d44 de3c8d40 c09060e2 de25dd80 de3c8d40 dec1dc7c e1894fa4 dec1dcb0 00000040 00000004 00000000 00000800 00000004 00000004 dec1dce0 e1895a2b dec1dcb4 de25d960 Call Trace: [<e1894fa4>] ? sctp_addto_chunk+0x4e/0x89 [sctp] [<e1894fa4>] sctp_addto_chunk+0x4e/0x89 [sctp] [<e1895a2b>] sctp_process_asconf+0x32f/0x3d1 [sctp] [<e188d554>] sctp_sf_do_asconf+0xf8/0x173 [sctp] [<e1890b02>] sctp_do_sm+0xb8/0x159 [sctp] [<e18a2248>] ? sctp_cname+0x0/0x52 [sctp] [<e189392d>] sctp_assoc_bh_rcv+0xac/0xe3 [sctp] [<e1897d76>] sctp_inq_push+0x2d/0x30 [sctp] [<e18a21b2>] sctp_rcv+0x7a7/0x83d [sctp] [<c077a95c>] ? ipv4_confirm+0x118/0x125 [<c073a970>] ? nf_iterate+0x34/0x62 [<c074789d>] ? ip_local_deliver_finish+0x0/0x194 [<c074789d>] ? ip_local_deliver_finish+0x0/0x194 [<c0747992>] ip_local_deliver_finish+0xf5/0x194 [<c074789d>] ? ip_local_deliver_finish+0x0/0x194 [<c0747a6e>] NF_HOOK.clone.1+0x3d/0x44 [<c0747ab3>] ip_local_deliver+0x3e/0x44 [<c074789d>] ? ip_local_deliver_finish+0x0/0x194 [<c074775c>] ip_rcv_finish+0x29f/0x2c7 [<c07474bd>] ? ip_rcv_finish+0x0/0x2c7 [<c0747a6e>] NF_HOOK.clone.1+0x3d/0x44 [<c0747cae>] ip_rcv+0x1f5/0x233 [<c07474bd>] ? ip_rcv_finish+0x0/0x2c7 [<c071dce3>] __netif_receive_skb+0x310/0x336 [<c07221f3>] netif_receive_skb+0x4b/0x51 [<e0a4ed3d>] cp_rx_poll+0x1e7/0x29c [8139cp] [<c072275e>] net_rx_action+0x65/0x13a [<c0445a54>] __do_softirq+0xa1/0x149 [<c04459b3>] ? __do_softirq+0x0/0x149 <IRQ> [<c0445891>] ? irq_exit+0x37/0x72 [<c040a7e9>] ? do_IRQ+0x81/0x95 [<c07b3670>] ? common_interrupt+0x30/0x38 [<c0428058>] ? native_safe_halt+0xa/0xc [<c040f5d7>] ? default_idle+0x58/0x92 [<c0408fb0>] ? cpu_idle+0x96/0xb2 [<c0797989>] ? rest_init+0x5d/0x5f [<c09fd90c>] ? start_kernel+0x34b/0x350 [<c09fd0cb>] ? i386_start_kernel+0xba/0xc1 Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-01Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-03-31appletalk: Fix OOPS in atalk_release().David S. Miller
Commit 60d9f461a20ba59219fdcdc30cbf8e3a4ad3f625 ("appletalk: remove the BKL") added a dereference of "sk" before checking for NULL in atalk_release(). Guard the code block completely, rather than partially, with the NULL check. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-31Merge branch 'master' of ↵Gustavo F. Padovan
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-2.6
2011-03-31Bluetooth: Fix warning with hci_cmd_timerThomas Gleixner
After we made debugobjects working again, we got the following: WARNING: at lib/debugobjects.c:262 debug_print_object+0x8e/0xb0() Hardware name: System Product Name ODEBUG: free active (active state 0) object type: timer_list hint: hci_cmd_timer+0x0/0x60 Pid: 2125, comm: dmsetup Tainted: G W 2.6.38-06707-gc62b389 #110375 Call Trace: [<ffffffff8104700a>] warn_slowpath_common+0x7a/0xb0 [<ffffffff810470b6>] warn_slowpath_fmt+0x46/0x50 [<ffffffff812d3a5e>] debug_print_object+0x8e/0xb0 [<ffffffff81bd8810>] ? hci_cmd_timer+0x0/0x60 [<ffffffff812d4685>] debug_check_no_obj_freed+0x125/0x230 [<ffffffff810f1063>] ? check_object+0xb3/0x2b0 [<ffffffff810f3630>] kfree+0x150/0x190 [<ffffffff81be4d06>] ? bt_host_release+0x16/0x20 [<ffffffff81be4d06>] bt_host_release+0x16/0x20 [<ffffffff813a1907>] device_release+0x27/0xa0 [<ffffffff812c519c>] kobject_release+0x4c/0xa0 [<ffffffff812c5150>] ? kobject_release+0x0/0xa0 [<ffffffff812c61f6>] kref_put+0x36/0x70 [<ffffffff812c4d37>] kobject_put+0x27/0x60 [<ffffffff813a21f7>] put_device+0x17/0x20 [<ffffffff81bda4f9>] hci_free_dev+0x29/0x30 [<ffffffff81928be6>] vhci_release+0x36/0x70 [<ffffffff810fb366>] fput+0xd6/0x1f0 [<ffffffff810f8fe6>] filp_close+0x66/0x90 [<ffffffff810f90a9>] sys_close+0x99/0xf0 [<ffffffff81d4c96b>] system_call_fastpath+0x16/0x1b That timer was introduced with commit 6bd32326cda(Bluetooth: Use proper timer for hci command timout) Timer seems to be running when the thing is closed. Removing the timer unconditionally fixes the problem. And yes, it needs to be fixed before the HCI_UP check. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-03-31Bluetooth: delete hanging L2CAP channelAndrei Emeltchenko
Sometimes L2CAP connection remains hanging. Make sure that L2CAP channel is deleted. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-03-31Bluetooth: Fix missing hci_dev_lock_bh in user_confirm_replyJohan Hedberg
The code was correctly calling _unlock at the end of the function but there was no actual _lock call anywhere. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-03-31Bluetooth: Fix HCI_RESET command synchronizationGustavo F. Padovan
We can't send new commands before a cmd_complete for the HCI_RESET command shows up. Reported-by: Mikko Vinni <mmvinni@yahoo.com> Reported-by: Justin P. Mattock <justinmattock@gmail.com> Reported-by: Ed Tomlinson <edt@aei.ca> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Tested-by: Justin P. Mattock <justinmattock@gmail.com> Tested-by: Mikko Vinni <mmvinni@yahoo.com> Tested-by: Ed Tomlinson <edt@aei.ca>
2011-03-31Bluetooth: Increment unacked_frames count only the first transmitSuraj Sumangala
This patch lets 'l2cap_pinfo.unacked_frames' be incremented only the first time a frame is transmitted. Previously it was being incremented for retransmitted packets too resulting the value to cross the transmit window size. Signed-off-by: Suraj Sumangala <suraj@atheros.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-03-31Bluetooth: Add local Extended Inquiry Response (EIR) supportJohan Hedberg
This patch adds automated creation of the local EIR data based on what 16-bit UUIDs are registered and what the device name is. This should cover the majority use cases, however things like 32/128-bit UUIDs, TX power and Device ID will need to be added later to be on par with what bluetoothd is capable of doing (without the Management interface). Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-03-31Bluetooth: check L2CAP info_rsp ident and stateAndrei Emeltchenko
Information requests/responses are unbound to L2CAP channel. Patch fixes issue arising when two devices connects at the same time to each other. This way we do not process out of the context messages. We are safe dropping info_rsp since info_timer is left running. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-03-31Bluetooth: Move bt_accept_enqueue() to outside __l2cap_chan_addGustavo F. Padovan
bt_accept_enqueue() is not really a channel action, so do it outside. This patch is part of a set of patches to create an struct l2cap_chan to have a clear separation between the struct sock and the L2CAP channel stuff. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-03-31Bluetooth: Enable support for out of band association modelSzymon Janc
If remote side reports oob availability or we are pairing initiator use oob data for pairing if available. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-03-31Bluetooth: Add add/remove_remote_oob_data management commandsSzymon Janc
This patch adds commands to add and remove remote OOB data to the managment interface. Remote data is stored in kernel and can be used by corresponding HCI commands and events when needed. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-03-31Bluetooth: Add read_local_oob_data management commandSzymon Janc
This patch adds a command to read local OOB data to the managment interface. The command maps directly to the Read Local OOB Data HCI command. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-03-31Bluetooth: Allow for NULL data in mgmt_pending_addSzymon Janc
Since index is in mgmt_hdr it is possible to have mgmt command with no parameters that still needs to add itself to pending list. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-03-31Bluetooth: Rename cmd to param in pending_cmdSzymon Janc
This field holds not whole command but only command specific parameters. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-26 00:51:12 +0000