summaryrefslogtreecommitdiffstats
path: root/net
AgeCommit message (Collapse)Author
2010-09-03ipv6: add special mode forwarding=2 to send RS while configured as routerThomas Graf
Similar to accepting router advertisement, the IPv6 stack does not send router solicitations if forwarding is enabled. This patch enables this behavior to be overruled by setting forwarding to the special value 2. Signed-off-by: Thomas Graf <tgraf@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-03ipv6: add special mode accept_ra=2 to accept RA while configured as routerThomas Graf
The current IPv6 behavior is to not accept router advertisements while forwarding, i.e. configured as router. This does make sense, a router is typically not supposed to be auto configured. However there are exceptions and we should allow the current behavior to be overwritten. Therefore this patch enables the user to overrule the "if forwarding enabled then don't listen to RAs" rule by setting accept_ra to the special value of 2. An alternative would be to ignore the forwarding switch alltogether and solely accept RAs based on the value of accept_ra. However, I found that if not intended, accepting RAs as a router can lead to strange unwanted behavior therefore we it seems wise to only do so if the user explicitely asks for this behavior. Signed-off-by: Thomas Graf <tgraf@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-02pkt_sched: Fix lockdep warning on est_tree_lock in gen_estimatorJarek Poplawski
This patch fixes a lockdep warning: [ 516.287584] ========================================================= [ 516.288386] [ INFO: possible irq lock inversion dependency detected ] [ 516.288386] 2.6.35b #7 [ 516.288386] --------------------------------------------------------- [ 516.288386] swapper/0 just changed the state of lock: [ 516.288386] (&qdisc_tx_lock){+.-...}, at: [<c12eacda>] est_timer+0x62/0x1b4 [ 516.288386] but this lock took another, SOFTIRQ-unsafe lock in the past: [ 516.288386] (est_tree_lock){+.+...} [ 516.288386] [ 516.288386] and interrupts could create inverse lock ordering between them. ... So, est_tree_lock needs BH protection because it's taken by qdisc_tx_lock, which is used both in BH and process contexts. (Full warning with this patch at netdev, 02 Sep 2010.) Fixes commit: ae638c47dc040b8def16d05dc6acdd527628f231 ("pkt_sched: gen_estimator: add a new lock") Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-02Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-09-02Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2010-09-02net: arp: code cleanupChangli Gao
Clean the code up according to Documentation/CodingStyle. Don't initialize the variable dont_send in arp_process(). Remove the temporary varialbe flags in arp_state_to_flags(). Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-02net: dev_add_pack() & __dev_remove_pack() changesEric Dumazet
Add a small helper ptype_head() to get the head to manipulate dev_add_pack() & __dev_remove_pack() can use a spinlock without blocking BH, since softirq use RCU, and these functions are run from process context only. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-02ipvs: avoid oops for passive FTPJulian Anastasov
Fix Passive FTP problem in ip_vs_ftp: - Do not oops in nf_nat_set_seq_adjust (adjust_tcp_sequence) when iptable_nat module is not loaded Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-02ipvs: use pkts for SCTP tooJulian Anastasov
Use correctly the in_pkts packet counter also for SCTP Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-02net: another last_rx roundEric Dumazet
Kill last_rx use in l2tp and two net drivers Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01gro: fix different skb headroomsEric Dumazet
Packets entering GRO might have different headrooms, even for a given flow (because of implementation details in drivers, like copybreak). We cant force drivers to deliver packets with a fixed headroom. 1) fix skb_segment() skb_segment() makes the false assumption headrooms of fragments are same than the head. When CHECKSUM_PARTIAL is used, this can give csum_start errors, and crash later in skb_copy_and_csum_dev() 2) allocate a minimal skb for head of frag_list skb_gro_receive() uses netdev_alloc_skb(headroom + skb_gro_offset(p)) to allocate a fresh skb. This adds NET_SKB_PAD to a padding already provided by netdevice, depending on various things, like copybreak. Use alloc_skb() to allocate an exact padding, to reduce cache line needs: NET_SKB_PAD + NET_IP_ALIGN bugzilla : https://bugzilla.kernel.org/show_bug.cgi?id=16626 Many thanks to Plamen Petrov, testing many debugging patches ! With help of Jarek Poplawski. Reported-by: Plamen Petrov <pvp-lsts@fs.uni-ruse.bg> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01bridge: Clear INET control block of SKBs passed into ip_fragment().David S. Miller
In a similar vain to commit 17762060c25590bfddd68cc1131f28ec720f405f ("bridge: Clear IPCB before possible entry into IP stack") Any time we call into the IP stack we have to make sure the state there is as expected by the ipv4 code. With help from Eric Dumazet and Herbert Xu. Reported-by: Bandan Das <bandan.das@stratus.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01tcp: update also tcp_output with regard to RFC 5681Gerrit Renker
Thanks to Ilpo Jarvinen, this updates also the initial window setting for tcp_output with regard to RFC 5681. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01net: make rx_queue sysfs_ops conststephen hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01ipv4: minor fix about RPF in help of KconfigNicolas Dichtel
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01xfrm_user: avoid a warning with some compilerNicolas Dichtel
Attached is a small patch to remove a warning ("warning: ISO C90 forbids mixed declarations and code" with gcc 4.3.2). Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01net/sched/sch_hfsc.c: initialize parent's cl_cfmin properly in init_vf()Michal Soltys
This patch fixes init_vf() function, so on each new backlog period parent's cl_cfmin is properly updated (including further propgation towards the root), even if the activated leaf has no upperlimit curve defined. Signed-off-by: Michal Soltys <soltys@ziu.info> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01net sched: fix kernel leak in act_policeJeff Mahoney
While reviewing commit 1c40be12f7d8ca1d387510d39787b12e512a7ce8, I audited other users of tc_action_ops->dump for information leaks. That commit covered almost all of them but act_police still had a leak. opt.limit and opt.capab aren't zeroed out before the structure is passed out. This patch uses the C99 initializers to zero everything unused out. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Acked-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01mac80211: only cancel software-based scans on suspendJohn W. Linville
Otherwise the hardware scan handler could access an invalid scan request structure. The driver should cancel any pending hardware scans during the suspend process anyway, so also add a warning if the hardware scan is still pending when the device resumes. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-01Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-09-01net: skbuff.c cleanupEric Dumazet
(skb->data - skb->head) can be changed by skb_headroom(skb) Remove some uses of NET_SKBUFF_DATA_USES_OFFSET, using (skb_end_pointer(skb) - skb->head) or (skb_tail_pointer(skb) - skb->head) : compiler does the right thing, and this is more readable for us ;) (struct skb_shared_info *) casts in pskb_expand_head() to help memcpy() to use aligned moves. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01skge: add GRO supportEric Dumazet
- napi_gro_flush() is exported from net/core/dev.c, to avoid an irq_save/irq_restore in the packet receive path. - use napi_gro_receive() instead of netif_receive_skb() - use napi_gro_flush() before calling __napi_complete() - turn on NETIF_F_GRO by default - Tested on a Marvell 88E8001 Gigabit NIC Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01net: tunnels should use rcu_dereferenceEric Dumazet
tunnel4_handlers, tunnel64_handlers, tunnel6_handlers and tunnel46_handlers are protected by RCU, but we dont use appropriate rcu primitives to scan them. rcu_lock() is already held by caller. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-31gro: unexport tcp4_gro_receive and tcp4_gro_completeEric Dumazet
tcp4_gro_receive() and tcp4_gro_complete() dont need to be exported. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-31pktgen: remove non used variableEric Dumazet
remove non used variable "queue" in pg_cleanup Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-31vlan: Use vlan_dev_real_dev in vlan_hwaccel_do_receiveJiri Pirko
[patch net-next-2.6] vlan: Use vlan_dev_real_dev in vlan_hwaccel_do_receive Use helper as in other places. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-31Phonet: do not set POLLOUT in case of send buffer overflowRémi Denis-Courmont
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-31Phonet: correct sendmsg() error code from sock_alloc_send_skb()Rémi Denis-Courmont
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-31Phonet: restore flow control credits when sending failsRémi Denis-Courmont
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-31mac80211: cancel scan in ieee80211_restart_hw if software scan pendingJohn W. Linville
This function exists to clean-up after a hardware error or something similar. The restart is accomplished using the same infrastructure used to resume after a suspend. The suspend path cancels running scans, so it seems appropriate to do that here as well for software-based scans. If a hardware-based scan is pending, issue a warning message since this indicates that the drivers has failed to clean-up after itself. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-31wireless: register wiphy rfkill w/o holding cfg80211_mutexJohn W. Linville
Otherwise lockdep complains... https://bugzilla.kernel.org/show_bug.cgi?id=17311 [ INFO: possible circular locking dependency detected ] 2.6.36-rc2-git4 #12 ------------------------------------------------------- kworker/0:3/3630 is trying to acquire lock: (rtnl_mutex){+.+.+.}, at: [<ffffffff813396c7>] rtnl_lock+0x12/0x14 but task is already holding lock: (rfkill_global_mutex){+.+.+.}, at: [<ffffffffa014b129>] rfkill_switch_all+0x24/0x49 [rfkill] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (rfkill_global_mutex){+.+.+.}: [<ffffffff81079ad7>] lock_acquire+0x120/0x15b [<ffffffff813ae869>] __mutex_lock_common+0x54/0x52e [<ffffffff813aede9>] mutex_lock_nested+0x34/0x39 [<ffffffffa014b4ab>] rfkill_register+0x2b/0x29c [rfkill] [<ffffffffa0185ba0>] wiphy_register+0x1ae/0x270 [cfg80211] [<ffffffffa0206f01>] ieee80211_register_hw+0x1b4/0x3cf [mac80211] [<ffffffffa0292e98>] iwl_ucode_callback+0x9e9/0xae3 [iwlagn] [<ffffffff812d3e9d>] request_firmware_work_func+0x54/0x6f [<ffffffff81065d15>] kthread+0x8c/0x94 [<ffffffff8100ac24>] kernel_thread_helper+0x4/0x10 -> #1 (cfg80211_mutex){+.+.+.}: [<ffffffff81079ad7>] lock_acquire+0x120/0x15b [<ffffffff813ae869>] __mutex_lock_common+0x54/0x52e [<ffffffff813aede9>] mutex_lock_nested+0x34/0x39 [<ffffffffa018605e>] cfg80211_get_dev_from_ifindex+0x1b/0x7c [cfg80211] [<ffffffffa0189f36>] cfg80211_wext_giwscan+0x58/0x990 [cfg80211] [<ffffffff8139a3ce>] ioctl_standard_iw_point+0x1a8/0x272 [<ffffffff8139a529>] ioctl_standard_call+0x91/0xa7 [<ffffffff8139a687>] T.723+0xbd/0x12c [<ffffffff8139a727>] wext_handle_ioctl+0x31/0x6d [<ffffffff8133014e>] dev_ioctl+0x63d/0x67a [<ffffffff8131afd9>] sock_ioctl+0x48/0x21d [<ffffffff81102abd>] do_vfs_ioctl+0x4ba/0x509 [<ffffffff81102b5d>] sys_ioctl+0x51/0x74 [<ffffffff81009e02>] system_call_fastpath+0x16/0x1b -> #0 (rtnl_mutex){+.+.+.}: [<ffffffff810796b0>] __lock_acquire+0xa93/0xd9a [<ffffffff81079ad7>] lock_acquire+0x120/0x15b [<ffffffff813ae869>] __mutex_lock_common+0x54/0x52e [<ffffffff813aede9>] mutex_lock_nested+0x34/0x39 [<ffffffff813396c7>] rtnl_lock+0x12/0x14 [<ffffffffa0185cb5>] cfg80211_rfkill_set_block+0x1a/0x7b [cfg80211] [<ffffffffa014aed0>] rfkill_set_block+0x80/0xd5 [rfkill] [<ffffffffa014b07e>] __rfkill_switch_all+0x3f/0x6f [rfkill] [<ffffffffa014b13d>] rfkill_switch_all+0x38/0x49 [rfkill] [<ffffffffa014b821>] rfkill_op_handler+0x105/0x136 [rfkill] [<ffffffff81060708>] process_one_work+0x248/0x403 [<ffffffff81062620>] worker_thread+0x139/0x214 [<ffffffff81065d15>] kthread+0x8c/0x94 [<ffffffff8100ac24>] kernel_thread_helper+0x4/0x10 Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Johannes Berg <johannes@sipsolutions.net>
2010-08-31net/wireless: Remove double testJulia Lawall
The same expression is tested twice and the result is the same each time. The sematic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @expression@ expression E; @@ ( * E || ... || E | * E && ... && E ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-31mac80211: Do not generate CQM events based on first Beacon framesJouni Malinen
The signal strength value in a single RX frame is not that reliable, so it is better to delay start of CQM events until there is a real average signal strength from more than a single Beacon frame available. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-31mac80211: Fix signal strength average initialization for CQM eventsJouni Malinen
The ave_beacon_signal value uses 1/16 dB unit and as such, must be initialized with the signal level of the first Beacon frame multiplied by 16. This fixes an issue where the initial CQM events are reported incorrectly with a burst of events while the running average approaches the correct value after the incorrect initialization. This could cause user space -based roaming decision process to get quite confused at the moment when we would like to go through authentication and DHCP. Cc: stable@kernel.org Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-31netlink: Make NETLINK_USERSOCK work again.David S. Miller
Once we started enforcing the a nl_table[] entry exist for a protocol, NETLINK_USERSOCK stopped working. Add a dummy table entry so that it works again. Reported-by: Thomas Voegtle <tv@lio96.de> Tested-by: Thomas Voegtle <tv@lio96.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-30irda: Correctly clean up self->ias_obj on irda_bind() failure.David S. Miller
If irda_open_tsap() fails, the irda_bind() code tries to destroy the ->ias_obj object by hand, but does so wrongly. In particular, it fails to a) release the hashbin attached to the object and b) reset the self->ias_obj pointer to NULL. Fix both problems by using irias_delete_object() and explicitly setting self->ias_obj to NULL, just as irda_release() does. Reported-by: Tavis Ormandy <taviso@cmpxchg8b.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-30ipv6: struct xfrm6_tunnel in read_mostly sectionEric Dumazet
tunnel6_handlers chain being scanned for each incoming packet, make sure it doesnt share an often dirtied cache line. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-30net: struct xfrm_tunnel in read_mostly sectionEric Dumazet
tunnel4_handlers chain being scanned for each incoming packet, make sure it doesnt share an often dirtied cache line. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-30dccp ccid-3: use per-route RTO or TCP RTO as fallbackGerrit Renker
This makes RTAX_RTO_MIN also available to CCID-3, replacing the compile-time RTO lower bound with a per-route tunable value. The original Kconfig option solved the problem that a very low RTT (in the order of HZ) can trigger too frequent and unnecessary reductions of the sending rate. This tunable does not affect the initial RTO value of 2 seconds specified in RFC 5348, section 4.2 and Appendix B. But like the hardcoded Kconfig value, it allows to adapt to network conditions. The same effect as the original Kconfig option of 100ms is now achieved by > ip route replace to unicast 192.168.0.0/24 rto_min 100j dev eth0 (assuming HZ=1000). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-30dccp ccid-2: Share TCP's minimum RTO codeGerrit Renker
Using a fixed RTO_MIN of 0.2 seconds was found to cause problems for CCID-2 over 802.11g: at least once per session there was a spurious timeout. It helped to then increase the the value of RTO_MIN over this link. Since the problem is the same as in TCP, this patch makes the solution from commit "05bb1fad1cde025a864a90cfeb98dcbefe78a44a" "[TCP]: Allow minimum RTO to be configurable via routing metrics." available to DCCP. This avoids reinventing the wheel, so that e.g. the following works in the expected way now also for CCID-2: > ip route change 10.0.0.2 rto_min 800 dev ath0 Luckily this useful rto_min function was recently moved to net/tcp.h, which simplifies sharing code originating from TCP. Documentation also updated (plus minor whitespace fixes). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-30tcp/dccp: Consolidate common code for RFC 3390 conversionGerrit Renker
This patch consolidates initial-window code common to TCP and CCID-2: * TCP uses RFC 3390 in a packet-oriented manner (tcp_input.c) and * CCID-2 uses RFC 3390 in packet-oriented manner (RFC 4341). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-30dccp ccid-2: Remove wrappers around sk_{reset,stop}_timer()Gerrit Renker
This removes the wrappers around the sk timer functions, since not much is gained from using them: the BUG_ON in start_rto_timer will never trigger since that function is called only if: * the RTO timer expires (rto_expire, and then timer_pending() is false); * in tx_packet_sent only if !timer_pending() (BUG_ON is redundant here); * previously in new_ack, after stopping the timer (timer_pending() false). Removing the wrappers also clears the way for eventually replacing the RTO timer with the icsk-retransmission-timer, as it is already part of the DCCP socket. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-30dccp ccid-2: Use u32 timestamps uniformlyGerrit Renker
Since CCID-2 is de facto a mini implementation of TCP, it makes sense to share as much code as possible. Hence this patch aligns CCID-2 timestamping with TCP timestamping. This also halves the space consumption (on 64-bit systems). The necessary include file <net/tcp.h> is already included by way of net/dccp.h. Redundant includes have been removed. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-30wireless extensions: fix kernel heap content leakJohannes Berg
Wireless extensions have an unfortunate, undocumented requirement which requires drivers to always fill iwp->length when returning a successful status. When a driver doesn't do this, it leads to a kernel heap content leak when userspace offers a larger buffer than would have been necessary. Arguably, this is a driver bug, as it should, if it returns 0, fill iwp->length, even if it separately indicated that the buffer contents was not valid. However, we can also at least avoid the memory content leak if the driver doesn't do this by setting the iwp length to max_tokens, which then reflects how big the buffer is that the driver may fill, regardless of how big the userspace buffer is. To illustrate the point, this patch also fixes a corresponding cfg80211 bug (since this requirement isn't documented nor was ever pointed out by anyone during code review, I don't trust all drivers nor all cfg80211 handlers to implement it correctly). Cc: stable@kernel.org [all the way back] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-30tcp: Add TCP_USER_TIMEOUT socket option.Jerry Chu
This patch provides a "user timeout" support as described in RFC793. The socket option is also needed for the the local half of RFC5482 "TCP User Timeout Option". TCP_USER_TIMEOUT is a TCP level socket option that takes an unsigned int, when > 0, to specify the maximum amount of time in ms that transmitted data may remain unacknowledged before TCP will forcefully close the corresponding connection and return ETIMEDOUT to the application. If 0 is given, TCP will continue to use the system default. Increasing the user timeouts allows a TCP connection to survive extended periods without end-to-end connectivity. Decreasing the user timeouts allows applications to "fail fast" if so desired. Otherwise it may take upto 20 minutes with the current system defaults in a normal WAN environment. The socket option can be made during any state of a TCP connection, but is only effective during the synchronized states of a connection (ESTABLISHED, FIN-WAIT-1, FIN-WAIT-2, CLOSE-WAIT, CLOSING, or LAST-ACK). Moreover, when used with the TCP keepalive (SO_KEEPALIVE) option, TCP_USER_TIMEOUT will overtake keepalive to determine when to close a connection due to keepalive failure. The option does not change in anyway when TCP retransmits a packet, nor when a keepalive probe will be sent. This option, like many others, will be inherited by an acceptor from its listener. Signed-off-by: H.K. Jerry Chu <hkchu@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-30mac80211: delete work timerJohannes Berg
The new workqueue changes helped me find this bug that's been lingering since the changes to the work processing in mac80211 -- the work timer is never deleted properly. Do that to avoid having it fire after all data structures have been freed. It can't be re-armed because all it will do, if running, is schedule the work, but that gets flushed later and won't have anything to do since all work items are gone by now (by way of interface removal). Cc: stable@kernel.org [2.6.34+] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-29IPVS: include net/ip6_checksum.h for csum_ipv6_magicStephen Rothwell
Fixes this build error: net/netfilter/ipvs/ip_vs_core.c: In function 'ip_vs_nat_icmp_v6': net/netfilter/ipvs/ip_vs_core.c:640: error: implicit declaration of function 'csum_ipv6_magic' Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-29SUNRPC: Don't truncate tail data unnecessarily in xdr_shrink_pagelenTrond Myklebust
If we have unused buffer space, then we should make use of that rather than unnecessarily truncating the message. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-08-29sunrpc: simplify xdr_shrink_pagelen use of "copy"Benny Halevy
The "copy" variable value can be computed using the existing logic rather than repeating it. Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-08-29sunrpc: don't use the copy variable in nested blockBenny Halevy
to clean up the code "copy" will be set prior to the block hence it mustn't be used there. Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-16 23:20:34 +0000