summaryrefslogtreecommitdiffstats
path: root/net
AgeCommit message (Collapse)Author
2010-11-22Net: wanrouter: Makefile: Remove deprecated kbuild goal definitionsTracey Dent
Changed Makefile to use <modules>-y instead of <modules>-objs because -objs is deprecated and not mentioned in Documentation/kbuild/makefiles.txt. Signed-off-by: Tracey Dent <tdent48227@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-22Net: sunrpc: auth_gss: Makefile: Remove deprecated kbuild goal definitionsTracey Dent
Changed Makefile to use <modules>-y instead of <modules>-objs because -objs is deprecated and not mentioned in Documentation/kbuild/makefiles.txt. Signed-off-by: Tracey Dent <tdent48227@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-22Net: rxrpc: Makefile: Remove deprecated kbuild goal definitionsTracey Dent
Changed Makefile to use <modules>-y instead of <modules>-objs because -objs is deprecated and not mentioned in Documentation/kbuild/makefiles.txt. Signed-off-by: Tracey Dent <tdent48227@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-22Net: rds: Makefile: Remove deprecated itemsTracey Dent
Changed Makefile to use <modules>-y instead of <modules>-objs because -objs is deprecated and not mentioned in Documentation/kbuild/makefiles.txt. Also, use the ccflags-$ flag instead of EXTRA_CFLAGS because EXTRA_CFLAGS is deprecated and should now be switched. Last but not least, took out if-conditionals. Signed-off-by: Tracey Dent <tdent48227@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-22Net: phonet: Makefile: Remove deprecated kbuild goal definitionsTracey Dent
Changed Makefile to use <modules>-y instead of <modules>-objs because -objs is deprecated and not mentioned in Documentation/kbuild/makefiles.txt. Signed-off-by: Tracey Dent <tdent48227@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-22Net: lapb: Makefile: Remove deprecated kbuild goal definitionsTracey Dent
Changed Makefile to use <modules>-y instead of <modules>-objs because -objs is deprecated and not mentioned in Documentation/kbuild/makefiles.txt. Signed-off-by: Tracey Dent <tdent48227@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-22Net: irda: irnet: Makefile: Remove deprecated kbuild goal definitionsTracey Dent
Changed Makefile to use <modules>-y instead of <modules>-objs because -objs is deprecated and not mentioned in Documentation/kbuild/makefiles.txt. Signed-off-by: Tracey Dent <tdent48227@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-22Net: irda: irlan: Makefile: Remove deprecated kbuild goal definitionsTracey Dent
Changed Makefile to use <modules>-y instead of <modules>-objs because -objs is deprecated and not mentioned in Documentation/kbuild/makefiles.txt. Signed-off-by: Tracey Dent <tdent48227@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-22Net: irda: ircomm: Makefile: Remove deprecated kbuild goal defintionsTracey Dent
Changed Makefile to use <modules>-y instead of <modules>-objs because -objs is deprecated and not mentioned in Documentation/kbuild/makefiles.txt. Signed-off-by: Tracey Dent <tdent48227@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-22Net: ipv6: netfiliter: Makefile: Remove deprecated kbuild goal definitionsTracey Dent
Changed Makefile to use <modules>-y instead of <modules>-objs because -objs is deprecated and not mentioned in Documentation/kbuild/makefiles.txt. Signed-off-by: Tracey Dent <tdent48227@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-22Net: ipv4: netfilter: Makefile: Remove deprecated kbuild goal definitionsTracey Dent
Changed Makefile to use <modules>-y instead of <modules>-objs because -objs is deprecated and not mentioned in Documentation/kbuild/makefiles.txt. Signed-off-by: Tracey Dent <tdent48227@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-22Net: econet: Makefile: Remove deprecated kbuild goal definitionsTracey Dent
Changed Makefile to use <modules>-y instead of <modules>-objs because -objs is deprecated and not mentioned in Documentation/kbuild/makefiles.txt. Signed-off-by: Tracey Dent <tdent48227@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-22Net: dns_resolver: Makefile: Remove deprecated kbuild goal definitionsTracey Dent
Changed Makefile to use <modules>-y instead of <modules>-objs because -objs is deprecated and not mentioned in Documentation/kbuild/makefiles.txt. Signed-off-by: Tracey Dent <tdent48227@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-22Net: ceph: Makefile: remove deprecated kbuild goal definitionsTracey Dent
Changed Makefile to use <modules>-y instead of <modules>-objs because -objs is deprecated and not mentioned in Documentation/kbuild/makefiles.txt. Signed-off-by: Tracey Dent <tdent48227@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-22Net: can: Makefile: Remove deprecated kbuild goal definitionsTracey Dent
Changed Makefile to use <modules>-y instead of <modules>-objs because -objs is deprecated and not mentioned in Documentation/kbuild/makefiles.txt. Signed-off-by: Tracey Dent <tdent48227@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-22Net: caif: Makefile: Remove deprecated itemsTracey Dent
Changed Makefile to use <modules>-y instead of <modules>-objs because -objs is deprecated and not mentioned in Documentation/kbuild/makefiles.txt. Also, use the ccflags-$ flag instead of EXTRA_CFLAGS because EXTRA_CFLAGS is deprecated and should now be switched. Last but not least, took out if-conditionals. Signed-off-by: Tracey Dent <tdent48227@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-22Net: bluetooth: Makefile: Remove deprecated kbuild goal definitionsTracey Dent
Changed Makefile to use <modules>-y instead of <modules>-objs because -objs is deprecated and not mentioned in Documentation/kbuild/makefiles.txt. Signed-off-by: Tracey Dent <tdent48227@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-22ipv6: fix missing in6_ifa_put in addrconfJohn Fastabend
Fix ref count bug introduced by commit 2de795707294972f6c34bae9de713e502c431296 Author: Lorenzo Colitti <lorenzo@google.com> Date: Wed Oct 27 18:16:49 2010 +0000 ipv6: addrconf: don't remove address state on ifdown if the address is being kept Fix logic so that addrconf_ifdown() decrements the inet6_ifaddr refcnt correctly with in6_ifa_put(). Reported-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-21pktgen: allow faster module unloadEric Dumazet
Unloading pktgen module needs ~6 seconds on a 64 cpus machine, to stop 64 kthreads. Add a pktgen_exiting variable to let kernel threads die faster, so that kthread_stop() doesnt have to wait too long for them. This variable is not tested in fast path. Note : Before exiting from pktgen_thread_worker(), we must make sure kthread_stop() is waiting for this thread to be stopped, like its done in kernel/softirq.c Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-21net: allow GFP_HIGHMEM in __vmalloc()Eric Dumazet
We forgot to use __GFP_HIGHMEM in several __vmalloc() calls. In ceph, add the missing flag. In fib_trie.c, xfrm_hash.c and request_sock.c, using vzalloc() is cleaner and allows using HIGHMEM pages as well. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-21packet: use vzalloc()Eric Dumazet
alloc_one_pg_vec_page() is supposed to return zeroed memory, so use vzalloc() instead of vmalloc() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-19svcrpc: fix wspace-checking raceJ. Bruce Fields
We call svc_xprt_enqueue() after something happens which we think may require handling from a server thread. To avoid such events being lost, svc_xprt_enqueue() must guarantee that there will be a svc_serv() call from a server thread following any such event. It does that by either waking up a server thread itself, or checking that XPT_BUSY is set (in which case somebody else is doing it). But the check of XPT_BUSY could occur just as someone finishes processing some other event, and just before they clear XPT_BUSY. Therefore it's important not to clear XPT_BUSY without subsequently doing another svc_export_enqueue() to check whether the xprt should be requeued. The xpo_wspace() check in svc_xprt_enqueue() breaks this rule, allowing an event to be missed in situations like: data arrives call svc_tcp_data_ready(): call svc_xprt_enqueue(): set BUSY find no write space svc_reserve(): free up write space call svc_enqueue(): test BUSY clear BUSY So, instead, check wspace in the same places that the state flags are checked: before taking BUSY, and in svc_receive(). Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-11-19svcrpc: svc_close_xprt commentJ. Bruce Fields
Neil Brown had to explain to me why we do this here; record the answer for posterity. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-11-19svcrpc: simplify svc_close_allJ. Bruce Fields
There's no need to be fooling with XPT_BUSY now that all the threads are gone. The list_del_init() here could execute at the same time as the svc_xprt_enqueue()'s list_add_tail(), with undefined results. We don't really care at this point, but it might result in a spurious list-corruption warning or something. And svc_close() isn't adding any value; just call svc_delete_xprt() directly. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-11-19nfsd4: centralize more calls to svc_xprt_receivedJ. Bruce Fields
Follow up on b48fa6b99100dc7772af3cd276035fcec9719ceb by moving all the svc_xprt_received() calls for the main xprt to one place. The clearing of XPT_BUSY here is critical to the correctness of the server, so I'd prefer it to be obvious where we do it. The only substantive result is moving svc_xprt_received() after svc_receive_deferred(). Other than a (likely insignificant) delay waking up the next thread, that should be harmless. Also reshuffle the exit code a little to skip a few other steps that we don't care about the in the svc_delete_xprt() case. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-11-19svcrpc: don't set then immediately clear XPT_DEFERREDJ. Bruce Fields
There's no harm to doing this, since the only caller will immediately call svc_enqueue() afterwards, ensuring we don't miss the remaining deferred requests just because XPT_DEFERRED was briefly cleared. But why not just do this the simple way? Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-11-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: fix readdir EOVERFLOW on 32-bit archs ceph: fix frag offset for non-leftmost frags ceph: fix dangling pointer ceph: explicitly specify page alignment in network messages ceph: make page alignment explicit in osd interface ceph: fix comment, remove extraneous args ceph: fix update of ctime from MDS ceph: fix version check on racing inode updates ceph: fix uid/gid on resent mds requests ceph: fix rdcache_gen usage and invalidate ceph: re-request max_size if cap auth changes ceph: only let auth caps update max_size ceph: fix open for write on clustered mds ceph: fix bad pointer dereference in ceph_fill_trace ceph: fix small seq message skipping Revert "ceph: update issue_seq on cap grant"
2010-11-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (31 commits) net: fix kernel-doc for sk_filter_rcu_release be2net: Fix to avoid firmware update when interface is not open. netfilter: fix IP_VS dependencies net: irda: irttp: sync error paths of data- and udata-requests ipv6: Expose reachable and retrans timer values as msecs ipv6: Expose IFLA_PROTINFO timer values in msecs instead of jiffies 3c59x: fix build failure on !CONFIG_PCI ipg.c: remove id [SUNDANCE, 0x1021] net: caif: spi: fix potential NULL dereference ath9k_htc: Avoid setting QoS control for non-QoS frames net: zero kobject in rx_queue_release net: Fix duplicate volatile warning. MAINTAINERS: Add stmmac maintainer bonding: fix a race in IGMP handling cfg80211: fix can_beacon_sec_chan, reenable HT40 gianfar: fix signedness issue net: bnx2x: fix error value sign 8139cp: fix checksum broken r8169: fix checksum broken rds: Integer overflow in RDS cmsg handling ...
2010-11-19Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bonding/bond_main.c net/core/net-sysfs.c net/ipv6/addrconf.c
2010-11-19X25: remove bkl in routing ioctlsandrew hendry
Routing doesn't use the socket data and is protected by x25_route_list_lock Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-19X25: remove bkl in inq and outq ioctlsandrew hendry
Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-19X25: remove bkl in timestamp ioctlsandrew hendry
Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-19X25: pushdown bkl in ioctlsandrew hendry
Push down the bkl in the ioctls so they can be removed one at a time. Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-19filter: use reciprocal divideEric Dumazet
At compile time, we can replace the DIV_K instruction (divide by a constant value) by a reciprocal divide. At exec time, the expensive divide is replaced by a multiply, a less expensive operation on most processors. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-19filter: cleanup codes[] initEric Dumazet
Starting the translated instruction to 1 instead of 0 allows us to remove one descrement at check time and makes codes[] array init cleaner. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-19filter: optimize sk_run_filterEric Dumazet
Remove pc variable to avoid arithmetic to compute fentry at each filter instruction. Jumps directly manipulate fentry pointer. As the last instruction of filter[] is guaranteed to be a RETURN, and all jumps are before the last instruction, we dont need to check filter bounds (number of instructions in filter array) at each iteration, so we remove it from sk_run_filter() params. On x86_32 remove f_k var introduced in commit 57fe93b374a6b871 (filter: make sure filters dont read uninitialized memory) Note : We could use a CONFIG_ARCH_HAS_{FEW|MANY}_REGISTERS in order to avoid too many ifdefs in this code. This helps compiler to use cpu registers to hold fentry and A accumulator. On x86_32, this saves 401 bytes, and more important, sk_run_filter() runs much faster because less register pressure (One less conditional branch per BPF instruction) # size net/core/filter.o net/core/filter_pre.o text data bss dec hex filename 2948 0 0 2948 b84 net/core/filter.o 3349 0 0 3349 d15 net/core/filter_pre.o on x86_64 : # size net/core/filter.o net/core/filter_pre.o text data bss dec hex filename 5173 0 0 5173 1435 net/core/filter.o 5224 0 0 5224 1468 net/core/filter_pre.o Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-19net: fix kernel-doc for sk_filter_rcu_releaseRandy Dunlap
Fix kernel-doc warning for sk_filter_rcu_release(): Warning(net/core/filter.c:586): missing initial short description on line: * sk_filter_rcu_release: Release a socket filter by rcu_head Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-18netfilter: fix IP_VS dependenciesPatrick McHardy
When NF_CONNTRACK is enabled, IP_VS uses conntrack symbols. Therefore IP_VS can't be linked statically when conntrack is built modular. Reported-by: Justin P. Mattock <justinmattock@gmail.com> Tested-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-18net: irda: irttp: sync error paths of data- and udata-requestsWolfram Sang
irttp_data_request() returns meaningful errorcodes, while irttp_udata_request() just returns -1 in similar situations. Sync the two and the loglevels of the accompanying output. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-18ipv6: Expose reachable and retrans timer values as msecsThomas Graf
Expose reachable and retrans timer values in msecs instead of jiffies. Both timer values are already exposed as msecs in the neighbour table netlink interface. The creation timestamp format with increased precision is kept but cleaned up. Signed-off-by: Thomas Graf <tgraf@infradead.org> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-18Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-11-18nl80211/mac80211: Report signal averageBruno Randolf
Extend nl80211 to report an exponential weighted moving average (EWMA) of the signal value. Since the signal value usually fluctuates between different packets, an average can be more useful than the value of the last packet. This uses the recently added generic EWMA library function. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-18ipv6: Expose IFLA_PROTINFO timer values in msecs instead of jiffiesThomas Graf
IFLA_PROTINFO exposes timer related per device settings in jiffies. Change it to expose these values in msecs like the sysctl interface does. I did not find any users of IFLA_PROTINFO which rely on any of these values and even if there are, they are likely already broken because there is no way for them to reliably convert such a value to another time format. Signed-off-by: Thomas Graf <tgraf@infradead.org> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-18igmp: refine skb allocationsEric Dumazet
IGMP allocates MTU sized skbs. This may fail for large MTU (order-2 allocations), so add a fallback to try lower sizes. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-18net: move definitions of BPF_S_* to net/core/filter.cChangli Gao
BPF_S_* are used internally, should not be exposed to the others. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-18filter: Optimize instruction revalidation code.Tetsuo Handa
Since repeating u16 value to u8 value conversion using switch() clause's case statement is wasteful, this patch introduces u16 to u8 mapping table and removes most of case statements. As a result, the size of net/core/filter.o is reduced by about 29% on x86. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-18net: add priority field to pktgenJohn Fastabend
Add option to set skb priority to pktgen. Useful for testing QOS features. Also by running pktgen on the vlan device the qdisc on the real device can be tested. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-18net: zero kobject in rx_queue_releaseJohn Fastabend
netif_set_real_num_rx_queues() can decrement and increment the number of rx queues. For example ixgbe does this as features and offloads are toggled. Presumably this could also happen across down/up on most devices if the available resources changed (cpu offlined). The kobject needs to be zero'd in this case so that the state is not preserved across kobject_put()/kobject_init_and_add(). This resolves the following error report. ixgbe 0000:03:00.0: eth2: NIC Link is Up 10 Gbps, Flow Control: RX/TX kobject (ffff880324b83210): tried to init an initialized object, something is seriously wrong. Pid: 1972, comm: lldpad Not tainted 2.6.37-rc18021qaz+ #169 Call Trace: [<ffffffff8121c940>] kobject_init+0x3a/0x83 [<ffffffff8121cf77>] kobject_init_and_add+0x23/0x57 [<ffffffff8107b800>] ? mark_lock+0x21/0x267 [<ffffffff813c6d11>] net_rx_queue_update_kobjects+0x63/0xc6 [<ffffffff813b5e0e>] netif_set_real_num_rx_queues+0x5f/0x78 [<ffffffffa0261d49>] ixgbe_set_num_queues+0x1c6/0x1ca [ixgbe] [<ffffffffa0262509>] ixgbe_init_interrupt_scheme+0x1e/0x79c [ixgbe] [<ffffffffa0274596>] ixgbe_dcbnl_set_state+0x167/0x189 [ixgbe] Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-18dccp ccid-2: whitespace fix-upGerrit Renker
This fixes whitespace noise introduced in commit "dccp ccid-2: Algorithm to update buffer state", 5753fdfe8bd8e9a2ff9e5af19b0ffc78bfcd502a, 14 Nov 2010. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-18bonding: IGMP handling cleanupEric Dumazet
Instead of iterating in_dev->mc_list from bonding driver, its better to call a helper function provided by igmp.c Details of implementation (locking) are private to igmp code. ip_mc_rejoin_group(struct ip_mc_list *im) becomes ip_mc_rejoin_groups(struct in_device *in_dev); Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>