summaryrefslogtreecommitdiffstats
path: root/net
AgeCommit message (Collapse)Author
2013-05-29batman-adv: print the VID properlyAntonio Quartulli
Since the MSB bits of any vid variable are now used for storing flags, print the vid properly by taking the flags away and printing -1 in case of VID representing no real VLAN. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-05-29batman-adv: change VID semantic in the BLA codeAntonio Quartulli
In order to make batman-adv fully vlan aware later, the semantic used for variables storing the VLAN ID values has to be changed in order to be adapted to the new one which will be used batman-adv wide. In particular, the VID has to be an "_unsigned_ short int" and its 4 MSB will be used as a flag bitfield, while the remaining 12 bits are used to store the real VID value Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
2013-05-29batman-adv: do not print orig nodes without nc neighbors on nc table printMarek Lindner
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-05-29batman-adv: Remove unnecessary INIT_HLIST_NODE() callsLinus Lüssing
There's no need to for an explicit hlist_node initialization if it is added to a list right away, like it's the case with the hlist_add_head()s here. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-05-29batman-adv: pass a 16bit long flag argument to tt_global_add()Antonio Quartulli
it may be the case that we want to store some local TT client flags in a global entry, therefore the tt_global_add needs to get a proper argument for this Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-05-29batman-adv: don't deal with NET_IP_ALIGN manuallyAntonio Quartulli
Instead of dealing with NET_IP_ALIGN during allocation and headroom reservation, it is possible to use netdev_alloc_skb_ip_align() which transparently allocate and reserve the correct amount of data Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-05-29batman-adv: refactor batadv_tt_local_event()Antonio Quartulli
Instead of passing a generic combination of flags as argument, it is easier to pass the entire tt_common structure (containing the flags already set) plus a bitfield of event flags that will be unified with the already existing ones before inserting the client in the event queue. In this way invocations of the modified function can be simplified. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-05-29batman-adv: move batadv_slide_own_bcast_window to bat_iv_ogm.cAntonio Quartulli
batadv_slide_own_bcast_window() is used only in bat_iv_ogm.c and it is currently touching only batman_iv specific attributes. Move it into bat_iv_ogm.c and make it static. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-05-29batman-adv: move ring_buffer helper functions in bat_iv_ogmAntonio Quartulli
the two lonely ring_buffer helper functions are used by the bat_iv_ogm module only and therefore they can be moved inside it. Reported-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-05-29batman-adv: use eth_hdr() when it makes senseAntonio Quartulli
Instead of casting the result of skb_mac_header() to "struct ethhdr *" every time, the eth_hdr inline function can be use to beautify the code and improve its readability. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-05-29batman-adv: don't initialise batman_iv private members in hard-interface.cAntonio Quartulli
hard-interface.c has to do not contain any routing algorithm specific code. Allocate the hard-interface with kzalloc() and remove any useless and algorithm specific member initialisation Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-05-29batman-adv: do not silently ignore wrong conditionAntonio Quartulli
Only one neigh_node per orig_node should match a given neighbor address, therefore, if more than one matching neigh_node is found, a WARNING has to be triggered to let the user know that something is wrong in the originator state instead of silently skipping the error. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-05-29batman-adv: don't check compat version twiceAntonio Quartulli
Compatibility version is checked upon packet reception before calling any handler. For this reason it does need to be checked once more in the handler itself. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-05-29batman-adv: don't check the source address twiceAntonio Quartulli
The source address has already been checked in batadv_check_management_packet() upon packet reception and therefore it does not need to be checked again in ogm_process() Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-05-29batman-adv: slightly improve neighbor creation debug messageAntonio Quartulli
print the interface along with the new neighbor mac address Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-05-29batman-adv: drop useless argument seqno in neighbor creationAntonio Quartulli
the sequence number is not stored in struct neigh_node, therefore there is no need to pass such value to the neigh_node creation procedure. At the moment the value is only used by a debug message, but given the fact that the seqno is not related to the neighbor object, it is better to print it elsewhere. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-05-29batman-adv: fix typos in kernel doc & commentsMarek Lindner
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-05-29batman-adv: send each broadcast only once on non-wireless interfacesMatthias Schiffer
While it makes sense to send each broadcast thrice on 802.11 (WLAN) interfaces as broadcasts are often unreliable on these, there is no reason to do so on other interface types. The increased the overhead can be harmful on low-bandwidth links like VPN connections over slow internet lines, therefore it is better to reduce the number of broadcast packets sent on non-wireless links to one. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-05-29batman-adv: split batadv_is_wifi_iface() into two functionsMatthias Schiffer
Previously batadv_is_wifi_iface() did two things at once: looking up a net_device from an interface index, and determining if it is a wifi device. The second part is useful itself when the caller already has a net_device reference. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-05-28svcrpc: implement O_NONBLOCK behavior for use-gss-proxyJ. Bruce Fields
Somebody noticed LTP was complaining about O_NONBLOCK opens of /proc/net/rpc/use-gss-proxy succeeding and then a following read hanging. I'm not convinced LTP really has any business opening random proc files and expecting them to behave a certain way. Maybe this isn't really a bug. But in any case the O_NONBLOCK behavior could be useful for someone that wants to test whether gss-proxy is up without waiting. Reported-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-05-28net: Fix build warnings after mac_header and transport_header became __u16.David S. Miller
net/core/skbuff.c: In function ‘__alloc_skb_head’: net/core/skbuff.c:203:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] net/core/skbuff.c: In function ‘__alloc_skb’: net/core/skbuff.c:279:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] net/core/skbuff.c:280:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] net/core/skbuff.c: In function ‘build_skb’: net/core/skbuff.c:348:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] net/core/skbuff.c:349:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-28arp: flush arp cache on IFF_NOARP changeTimo Teräs
IFF_NOARP affects what kind of neighbor entries are created (nud NOARP or nud INCOMPLETE). If the flag changes, flush the arp cache to refresh all entries. Signed-off-by: Timo Teräs <timo.teras@iki.fi> Signed-off-by: Jiri Pirko <jiri@resnulli.us> v2->v3: shortened notifier_info struct name Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-28net: pass changed flags along with NETDEV_CHANGE eventJiri Pirko
Use new netdevice notifier infrastructure to pass along changed flags. Signed-off-by: Timo Teräs <timo.teras@iki.fi> Signed-off-by: Jiri Pirko <jiri@resnulli.us> v2->v3: shortened notifier_info struct name Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-28net: pass info struct via netdevice notifierJiri Pirko
So far, only net_device * could be passed along with netdevice notifier event. This patch provides a possibility to pass custom structure able to provide info that event listener needs to know. Signed-off-by: Jiri Pirko <jiri@resnulli.us> v2->v3: fix typo on simeth shortened dev_getter shortened notifier_info struct name v1->v2: fix notifier_call parameter in call_netdevice_notifier() Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-28Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
2013-05-28net/9p: Handle error in zero copy request correctly for 9p2000.uAneesh Kumar K.V
For zero copy request, error will be encoded in the user space buffer. So copy the error code correctly using copy_from_user. Here we use the extra bytes we allocate for zero copy request. If total error details are more than P9_ZC_HDR_SZ - 7 bytes, we return -EFAULT. The patch also avoid a memory allocation in the error path. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2013-05-28net/9p: Handle error in zero copy request correctly for 9p2000.uAneesh Kumar K.V
For zero copy request, error will be encoded in the user space buffer. So copy the error code correctly using copy_from_user. Here we use the extra bytes we allocate for zero copy request. If total error details are more than P9_ZC_HDR_SZ - 7 bytes, we return -EFAULT. The patch also avoid a memory allocation in the error path. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2013-05-28net/9p: Use virtio transpart as the default transportAneesh Kumar K.V
Make the default 9p experience better by defaulting to virtio transport if present. These days most of the users are using 9p in a virtualized setup Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2013-05-28net/9p: Make 9P2000.L the default protocol for 9p file systemAneesh Kumar K.V
If we dont' specify a protocol version default to 9P2000.L. 9P2000.L have better support for posix semantic and is where all the recent development is happening. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2013-05-27ipv4: fix redirect handling for TCP packetsMichal Kubecek
Unlike ipv4_redirect() and ipv4_sk_redirect(), ip_do_redirect() doesn't call __build_flow_key() directly but via ip_rt_build_flow_key() wrapper. This leads to __build_flow_key() getting pointer to IPv4 header of the ICMP redirect packet rather than pointer to the embedded IPv4 header of the packet initiating the redirect. As a result, handling of ICMP redirects initiated by TCP packets is broken. Issue was introduced by 4895c771c ("ipv4: Add FIB nexthop exceptions.") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-27netpoll: remove return value from netpoll_rx_disable()dingtianhong
The netpoll_rx_disable() will always return 0, it is no use and looks wordy, so remove the unnecessary code and get rid of it in _dev_open and _dev_close. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-27MPLS: Add limited GSO supportSimon Horman
In the case where a non-MPLS packet is received and an MPLS stack is added it may well be the case that the original skb is GSO but the NIC used for transmit does not support GSO of MPLS packets. The aim of this code is to provide GSO in software for MPLS packets whose skbs are GSO. SKB Usage: When an implementation adds an MPLS stack to a non-MPLS packet it should do the following to skb metadata: * Set skb->inner_protocol to the old non-MPLS ethertype of the packet. skb->inner_protocol is added by this patch. * Set skb->protocol to the new MPLS ethertype of the packet. * Set skb->network_header to correspond to the end of the L3 header, including the MPLS label stack. I have posted a patch, "[PATCH v3.29] datapath: Add basic MPLS support to kernel" which adds MPLS support to the kernel datapath of Open vSwtich. That patch sets the above requirements in datapath/actions.c:push_mpls() and was used to exercise this code. The datapath patch is against the Open vSwtich tree but it is intended that it be added to the Open vSwtich code present in the mainline Linux kernel at some point. Features: I believe that the approach that I have taken is at least partially consistent with the handling of other protocols. Jesse, I understand that you have some ideas here. I am more than happy to change my implementation. This patch adds dev->mpls_features which may be used by devices to advertise features supported for MPLS packets. A new NETIF_F_MPLS_GSO feature is added for devices which support hardware MPLS GSO offload. Currently no devices support this and MPLS GSO always falls back to software. Alternate Implementation: One possible alternate implementation is to teach netif_skb_features() and skb_network_protocol() about MPLS, in a similar way to their understanding of VLANs. I believe this would avoid the need for net/mpls/mpls_gso.c and in particular the calls to __skb_push() and __skb_push() in mpls_gso_segment(). I have decided on the implementation in this patch as it should not introduce any overhead in the case where mpls_gso is not compiled into the kernel or inserted as a module. MPLS GSO suggested by Jesse Gross. Based in part on "v4 GRE: Add TCP segmentation offload for GRE" by Pravin B Shelar. Cc: Jesse Gross <jesse@nicira.com> Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-27cfg80211: make WoWLAN configuration available to driversJohannes Berg
Make the current WoWLAN configuration available to drivers at runtime. This isn't really useful for the normal WoWLAN behaviour and accessing it can also be racy, but drivers may use it for testing the WoWLAN device behaviour while the host stays up & running to observe the device. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-27netfilter: Implement RFC 1123 for FTP conntrackJeff Mahoney
The FTP conntrack code currently only accepts the following format for the 227 response for PASV: 227 Entering Passive Mode (148,100,81,40,31,161). It doesn't accept the following format from an obscure server: 227 Data transfer will passively listen to 67,218,99,134,50,144 From RFC 1123: The format of the 227 reply to a PASV command is not well standardized. In particular, an FTP client cannot assume that the parentheses shown on page 40 of RFC-959 will be present (and in fact, Figure 3 on page 43 omits them). Therefore, a User-FTP program that interprets the PASV reply must scan the reply for the first digit of the host and port numbers. This patch adds support for the RFC 1123 clarification by: - Allowing a search filter to specify NUL as the terminator so that try_number will return successfully if the array of numbers has been filled when an unexpected character is encountered. - Using space as the separator for the 227 reply and then scanning for the first digit of the number sequence. The number sequence is parsed out using the existing try_rfc959 but with a NUL terminator. References: https://bugzilla.novell.com/show_bug.cgi?id=466279 References: http://bugzilla.netfilter.org/show_bug.cgi?id=574 Reported-by: Mark Post <mpost@novell.com> Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Patrick McHardy <kaber@trash.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: netfilter-devel@vger.kernel.org Cc: netfilter@vger.kernel.org Cc: coreteam@netfilter.org Cc: netdev@vger.kernel.org Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-05-27ipvs: Fix reuse connection if real server is deadGrzegorz Lyczba
Expire cached connection for new TCP/SCTP connection if real server is down. Otherwise, IPVS uses the dead server for the reused connection, instead of a new working one. Signed-off-by: Grzegorz Lyczba <grzegorz.lyczba@gmail.com> Acked-by: Hans Schillstrom <hans@schillstrom.com> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-05-27mac80211: Allow single vif mac address change with addr_maskHelmut Schaa
When changing the MAC address of a single vif mac80211 will check if the new address fits into the address mask specified by the driver. This only needs to be done when using multiple BSSIDs. Hence, check the new address only against all other vifs. Also fix the MAC address assignment on new interfaces if the user changed the address of a vif such that perm_addr is not covered by addr_mask anymore. Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=57371 Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Reported-by: Alessandro Lannocca <alessandro.lannocca@gmail.com> Cc: Alessandro Lannocca <alessandro.lannocca@gmail.com> Cc: Bruno Randolf <br1@thinktube.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-27mac80211: close AP_VLAN interfaces before unregistering allJohannes Berg
Since Eric's commit efe117ab8 ("Speedup ieee80211_remove_interfaces") there's a bug in mac80211 when it unregisters with AP_VLAN interfaces up. If the AP_VLAN interface was registered after the AP it belongs to (which is the typical case) and then we get into this code path, unregister_netdevice_many() will crash because it isn't prepared to deal with interfaces being closed in the middle of it. Exactly this happens though, because we iterate the list, find the AP master this AP_VLAN belongs to and dev_close() the dependent VLANs. After this, unregister_netdevice_many() won't pick up the fact that the AP_VLAN is already down and will do it again, causing a crash. Cc: stable@vger.kernel.org [2.6.33+] Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-27mac80211: assign AP_VLAN hw queues correctlyJohannes Berg
A lot of code in mac80211 assumes that the hw queues are set up correctly for all interfaces (except for monitor) but this isn't true for AP_VLAN interfaces. Fix this by copying the AP master configuration when an AP VLAN is brought up, after this the AP interface can't change its configuration any more and needs to be brought down to change it, which also forces AP_VLAN interfaces down, so just copying in open() is sufficient. Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-26netfilter: nfnetlink_queue: avoid peer_portid testFlorian Westphal
The portid is set to NETLINK_CB(skb).portid at create time. The run-time check will always be false. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-05-26Merge tag 'nfs-for-3.10-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: - Stable fix to prevent an rpc_task wakeup race - Fix a NFSv4.1 session drain deadlock - Fix a NFSv4/v4.1 mount regression when not running rpc.gssd - Ensure auth_gss pipe detection works in namespaces - Fix SETCLIENTID fallback if rpcsec_gss is not available * tag 'nfs-for-3.10-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: Fix SETCLIENTID fallback if GSS is not available SUNRPC: Prevent an rpc_task wakeup race NFSv4.1 Fix a pNFS session draining deadlock SUNRPC: Convert auth_gss pipe detection to work in namespaces SUNRPC: Faster detection if gssd is actually running SUNRPC: Fix a bug in gss_create_upcall
2013-05-25ip_tunnel: fix kernel panic with icmp_dest_unreachEric Dumazet
Daniel Petre reported crashes in icmp_dst_unreach() with following call graph: #3 [ffff88003fc03938] __stack_chk_fail at ffffffff81037f77 #4 [ffff88003fc03948] icmp_send at ffffffff814d5fec #5 [ffff88003fc03ae8] ipv4_link_failure at ffffffff814a1795 #6 [ffff88003fc03af8] ipgre_tunnel_xmit at ffffffff814e7965 #7 [ffff88003fc03b78] dev_hard_start_xmit at ffffffff8146e032 #8 [ffff88003fc03bc8] sch_direct_xmit at ffffffff81487d66 #9 [ffff88003fc03c08] __qdisc_run at ffffffff81487efd #10 [ffff88003fc03c48] dev_queue_xmit at ffffffff8146e5a7 #11 [ffff88003fc03c88] ip_finish_output at ffffffff814ab596 Daniel found a similar problem mentioned in http://lkml.indiana.edu/hypermail/linux/kernel/1007.0/00961.html And indeed this is the root cause : skb->cb[] contains data fooling IP stack. We must clear IPCB in ip_tunnel_xmit() sooner in case dst_link_failure() is called. Or else skb->cb[] might contain garbage from GSO segmentation layer. A similar fix was tested on linux-3.9, but gre code was refactored in linux-3.10. I'll send patches for stable kernels as well. Many thanks to Daniel for providing reports, patches and testing ! Reported-by: Daniel Petre <daniel.petre@rcs-rds.ro> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-25tcp: Remove 2 indentation levels in tcp_rcv_state_processJoe Perches
case TCP_FIN_WAIT1 can also be simplified by reversing tests and adding breaks; Add braces after case and move automatic definitions. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-25tcp: Remove another indentation level in tcp_rcv_state_processJoe Perches
case TCP_SYN_RECV: can have another indentation level removed by converting if (acceptable) { ...; } else { return 1; } to if (!acceptable) return 1; ...; Reflow code and comments to fit 80 columns. Another pure cleanup patch. Signed-off-by: Joe Perches <joe@perches.com> Improved-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-25tcp: remove one indentation level in tcp_rcv_state_process()Eric Dumazet
Remove one level of indentation 'introduced' in commit c3ae62af8e75 (tcp: should drop incoming frames without ACK flag set) if (true) { ... } @acceptable variable is a boolean. This patch is a pure cleanup. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-25net: add netnotifier event for upper device changeJiri Pirko
Now when upper device is changed, event is not propagated via RT Netlink to userspace. Userspace might never now about the change. Fix this by adding upper-device-change notifier event. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-25net: ipv6: Add IPv6 support to the ping socket.Lorenzo Colitti
This adds the ability to send ICMPv6 echo requests without a raw socket. The equivalent ability for ICMPv4 was added in 2011. Instead of having separate code paths for IPv4 and IPv6, make most of the code in net/ipv4/ping.c dual-stack and only add a few IPv6-specific bits (like the protocol definition) to a new net/ipv6/ping.c. Hopefully this will reduce divergence and/or duplication of bugs in the future. Caveats: - Setting options via ancillary data (e.g., using IPV6_PKTINFO to specify the outgoing interface) is not yet supported. - There are no separate security settings for IPv4 and IPv6; everything is controlled by /proc/net/ipv4/ping_group_range. - The proc interface does not yet display IPv6 ping sockets properly. Tested with a patched copy of ping6 and using raw socket calls. Compiles and works with all of CONFIG_IPV6={n,m,y}. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-26ipvs: change type of netns_ipvs->sysctl_sync_qlen_maxZhang Yanfei
This member of struct netns_ipvs is calculated from nr_free_buffer_pages so change its type to unsigned long in case of overflow. Also, type of its related proc var sync_qlen_max and the return type of function sysctl_sync_qlen_max() should be changed to unsigned long, too. Besides, the type of ipvs_master_sync_state->sync_queue_len should be changed to unsigned long accordingly. Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Julian Anastasov <ja@ssi.bg> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Simon Horman <horms@verge.net.au>
2013-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Merge net into net-next because some upcoming net-next changes build on top of bug fixes that went into net. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-25cfg80211: remove some locked wrappers from sme APIJohannes Berg
By making all the API functions require wdev locking we can clean up the API a bit, getting rid of the locking version of each function. This also decreases the size of cfg80211 by a small amount. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-25cfg80211: remove some locked wrappers from mlme APIJohannes Berg
By making all the API functions require wdev locking we can clean up the API a bit, getting rid of the locking version of each function. This also decreases the size of cfg80211 by a small amount. Signed-off-by: Johannes Berg <johannes.berg@intel.com>