summaryrefslogtreecommitdiffstats
path: root/net
AgeCommit message (Collapse)Author
2011-02-25Bluetooth: Remove duplicated BT_INFO() from L2CAPGustavo F. Padovan
The message for the initialization of the L2CAP layer was being printed twice. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-25Bluetooth: remove unnecessary call to hci_sock_cleanupAnand Gadiyar
hci_sock_cleanup is already called after the sock_err label. It appears that we can drop this call. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-22Bluetooth: fix build break on hci_sock.cAnand Gadiyar
Linux-next as of 20110217 complains when building for OMAP1. LD vmlinux `hci_sock_cleanup' referenced in section `.init.text' of net/built-in.o: defined in discarded section `.exit.text' of net/built-in.o `hci_sock_cleanup' referenced in section `.init.text' of net/built-in.o: defined in discarded section `.exit.text' of net/built-in.o make: *** [vmlinux] Error 1 A recent patch by Gustavo (Bluetooth: Merge L2CAP and SCO modules into bluetooth.ko) introduced this by calling the hci_sock_cleanup function in the error path of bt_init. Fix this by dropping the __exit marking for hci_sock_cleanup. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21Bluetooth: Fix LE conn creationAnderson Briglia
This patch prevents a crash when remote host tries to create a LE link which already exists. i.e.: call l2test twice passing the same parameters. Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21Bluetooth: Fix unnecessary list traversal in mgmt_pending_removeJohan Hedberg
All of the places that need to call mgmt_pending_remove already have a pointer to the pending command, so searching for the command in the list doesn't make sense. The added benefit is that many places that previously had to call list_del + mgmt_pending_free can just call mgmt_pending_remove now. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21Bluetooth: Fix inititial value for remote authentication requirementsJohan Hedberg
The remote authentication requirements for conections need to be initialized to 0xff (unknown) since it is possible that we receive a IO Capability Request before we have received information about the remote requirements. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21Bluetooth: Add mgmt_auth_failed eventJohan Hedberg
To properly track bonding completion an event to indicate authentication failure is needed. This event will be sent whenever an authentication complete HCI event with a non-zero status comes. It will also be sent when we're acting in acceptor role for SSP authentication in which case the controller will send a Simple Pairing Complete event. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21Bluetooth: Fix mgmt_pin_code_reply return parametersJohan Hedberg
The command complete event for mgmt_pin_code_reply & mgmt_pin_code_neg_reply should have the adapter index, Bluetooth address as well as the status. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21Bluetooth: Fix mgmt_pin_code_reply command status opcodeJohan Hedberg
The opcode for the ENODEV case was wrong (probably copy-paste mistake). Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21Bluetooth: Add management support for user confirmation requestJohan Hedberg
This patch adds support for the user confirmation (numeric comparison) Secure Simple Pairing authentication method. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21Bluetooth: Add mgmt_pair_device commandJohan Hedberg
This patch adds a new mgmt_pair_device which can be used to initiate a dedicated bonding procedure. Some extra callbacks are added to the hci_conn struct so that the pairing code can get notified of the completion of the procedure. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21Bluetooth: Make pending_add return a pointer to the added entryJohan Hedberg
This makes it more convenient to do manipulations on the entry (needed by later commits). Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-18Merge ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6John W. Linville
Conflicts: drivers/bluetooth/ath3k.c drivers/bluetooth/btusb.c
2011-02-18mac80211: Clear PS related flag on disabling power save.Vivek Natarajan
Clear IEEE80211_STA_NULLFUNC_ACKED flag on disabling power save. Without this fix, there is a chance of setting CONF_PS before sending nullfunc frame. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18small adjustment to net/mac80211/KconfigJan Beulich
"def_bool n" without prompt is pointless, this should be just "bool". Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18mac80211: fix 2.4 GHz 40 MHz disablingJohannes Berg
The module parameter ieee80211_disable_40mhz_24ghz was meant to allow disabling 40 MHz operation in the 2.4 GHz band by default. However, it is buggy as implemented because while it advertises to the AP that the device doesn't support 40 MHz, it will itself still use 40 MHz configurations. To fix this, clear the 40 MHz bits from the sband completely instead of overriding where used. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18mac80211: Add power to debugfs.Ben Greear
Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-next-2.6
2011-02-18mac80211: fix conn_mon_timer running after disassociateStanislaw Gruszka
Low level driver could pass rx frames to us after disassociate, what can lead to run conn_mon_timer by ieee80211_sta_rx_notify(). That is obviously wrong, but nothing happens until we unload modules and resources are used after free. If kernel debugging is enabled following warning could be observed: WARNING: at lib/debugobjects.c:259 debug_print_object+0x65/0x70() Hardware name: HP xw8600 Workstation ODEBUG: free active (active state 0) object type: timer_list Modules linked in: iwlagn(-) iwlcore mac80211 cfg80211 aes_x86_64 aes_generic fuse cpufreq_ondemand acpi_cpufreq freq_table mperf xt_physdev ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 ext3 jbd dm_mirror dm_region_hash dm_log dm_mod uinput hp_wmi sparse_keymap sg wmi arc4 microcode serio_raw ecb tg3 shpchp rfkill ext4 mbcache jbd2 sr_mod cdrom sd_mod crc_t10dif firewire_ohci firewire_core crc_itu_t mptsas mptscsih mptbase scsi_transport_sas ahci libahci pata_acpi ata_generic ata_piix floppy nouveau ttm drm_kms_helper drm i2c_algo_bit i2c_core video [last unloaded: cfg80211] Pid: 13827, comm: rmmod Tainted: G W 2.6.38-rc4-wl+ #22 Call Trace: [<ffffffff810649cf>] ? warn_slowpath_common+0x7f/0xc0 [<ffffffff81064ac6>] ? warn_slowpath_fmt+0x46/0x50 [<ffffffff81226fc5>] ? debug_print_object+0x65/0x70 [<ffffffff81227625>] ? debug_check_no_obj_freed+0x125/0x210 [<ffffffff8109ebd7>] ? debug_check_no_locks_freed+0xf7/0x170 [<ffffffff81156092>] ? kfree+0xc2/0x2f0 [<ffffffff813ec5c5>] ? netdev_release+0x45/0x60 [<ffffffff812f1067>] ? device_release+0x27/0xa0 [<ffffffff81216ddd>] ? kobject_release+0x8d/0x1a0 [<ffffffff81216d50>] ? kobject_release+0x0/0x1a0 [<ffffffff812183b7>] ? kref_put+0x37/0x70 [<ffffffff81216c57>] ? kobject_put+0x27/0x60 [<ffffffff813d5d1b>] ? netdev_run_todo+0x1ab/0x270 [<ffffffff813e771e>] ? rtnl_unlock+0xe/0x10 [<ffffffffa0581188>] ? ieee80211_unregister_hw+0x58/0x120 [mac80211] [<ffffffffa0377ed7>] ? iwl_pci_remove+0xdb/0x22a [iwlagn] [<ffffffff8123cde2>] ? pci_device_remove+0x52/0x120 [<ffffffff812f5205>] ? __device_release_driver+0x75/0xe0 [<ffffffff812f5348>] ? driver_detach+0xd8/0xe0 [<ffffffff812f4111>] ? bus_remove_driver+0x91/0x100 [<ffffffff812f5b62>] ? driver_unregister+0x62/0xa0 [<ffffffff8123d194>] ? pci_unregister_driver+0x44/0xa0 [<ffffffffa0377df5>] ? iwl_exit+0x15/0x1c [iwlagn] [<ffffffff810ab492>] ? sys_delete_module+0x1a2/0x270 [<ffffffff81498889>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff8100bf42>] ? system_call_fastpath+0x16/0x1b Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-17Bluetooth: fix checkpatch errors in af_bluetooth.cGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-17Bluetooth: Fix errors reported by checkpatch.plGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-17Bluetooth: fix errors reported by checkpatch.plGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-17Bluetooth: Fix some code style issues in hci_event.cSzymon Janc
Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-17Bluetooth: Fix some code style issues in hci_core.cSzymon Janc
Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-17Bluetooth: Clean up hci_sniff_subrate_evt functionSzymon Janc
Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-17Bluetooth: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>Szymon Janc
As warned by checkpatch.pl, use #include <linux/uaccess.h> instead of <asm/uaccess.h>. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Send LE Connection Update CommandClaudio Takahasi
If the new connection update parameter are accepted, the LE master host sends the LE Connection Update Command to its controller informing the new requested parameters. Signed-off-by: Claudio Takahasi <claudio.takahasi@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Use proper timer for hci command timoutVille Tervo
Use proper timer instead of hci command flow control to timeout failed hci commands. Otherwise stack ends up sending commands when flow control is used to block new commands. 2010-09-01 18:29:41.592132 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 bdaddr 00:16:CF:E1:C7:D7 mode 2 clkoffset 0x0000 2010-09-01 18:29:41.592681 > HCI Event: Command Status (0x0f) plen 4 Remote Name Request (0x01|0x0019) status 0x00 ncmd 0 2010-09-01 18:29:51.022033 < HCI Command: Remote Name Request Cancel (0x01|0x001a) plen 6 bdaddr 00:16:CF:E1:C7:D7 Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Fix crash when ioctl(HCIUARTSETPROTO) failsGustavo F. Padovan
If the fail happens the HCI del_timer may timeout after the the hci dev unregister. This lead to a kernel crash. Reported-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Add connection parameter update responseClaudio Takahasi
Implements L2CAP Connection Parameter Update Response defined in the Bluetooth Core Specification, Volume 3, Part A, section 4.21. Address the LE Connection Parameter Procedure initiated by the slave. Connection Interval Minimum and Maximum have the same range: 6 to 3200. Time = N * 1.25ms. Minimum shall be less or equal to Maximum. The Slave Latency field shall have a value in the range of 0 to ((connSupervisionTimeout / connIntervalMax) - 1). Latency field shall be less than 500. connSupervisionTimeout = Timeout Multiplier * 10 ms. Multiplier field shall have a value in the range of 10 to 3200. Signed-off-by: Claudio Takahasi <claudio.takahasi@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Add LE signaling commands handlingClaudio Takahasi
This patch splits the L2CAP command handling function in order to have a clear separation between the commands related to BR/EDR and LE. Commands and responses in the LE signaling channel are not being handled yet, command reject is sent to all received requests. Bluetooth Core Specification, Volume 3, Part A, section 4 defines the signaling packets formats and allowed commands/responses over the LE signaling channel. Signed-off-by: Claudio Takahasi <claudio.takahasi@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Treat LE and ACL links separately on timeoutVille Tervo
Separate LE and ACL timeouts. Othervise ACL connections on non LE hw will time out after 45 secs. Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Fix initiated LE connectionsVinicius Costa Gomes
Fix LE connections not being marked as master. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Do not send disconn comand over LE linksVille Tervo
l2cap over LE links can be disconnected without sending disconnect command first. Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Add server socket support for LE connectionVille Tervo
Add support for LE server sockets. Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Add LE connection support to L2CAPVille Tervo
Add basic LE connection support to L2CAP. LE connection can be created by specifying cid in struct sockaddr_l2 Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Use LE buffers for LE trafficVille Tervo
Bluetooth chips may have separate buffers for LE traffic. This patch add support to use LE buffers provided by the chip. Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Add LE connect supportVille Tervo
Bluetooth V4.0 adds support for Low Energy (LE) connections. Specification introduces new set of hci commands to control LE connection. This patch adds logic to create, cancel and disconnect LE connections. Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Release BTM while sleeping to avoid deadlockVladislav P
Signed-off-by: Vladislav P <vladisslav@inbox.ru> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-15Bluetooth: Add L2CAP mode to debugfs outputGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-15Bluetooth: remove l2cap_load() hackGustavo F. Padovan
l2cap_load() was added to trigger l2cap.ko module loading from the RFCOMM and BNEP modules. Now that L2CAP module is gone, we don't need it anymore. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-14mac80211: reply to directed probes in IBSSJohannes Berg
WFA certification and the WMM spec require that we always reply to unicast probe requests, so do that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-14mac80211: Remove superfluous if clauseHelmut Schaa
ieee80211_rx_h_check returned RX_DROP_MONITOR in case the if statement in question was true but the same return value is also used directly after the if clause. Hence, we can just drop the whole if clause and as such simplify the code. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-14Bluetooth: Merge L2CAP and SCO modules into bluetooth.koGustavo F. Padovan
Actually doesn't make sense have these modules built separately. The L2CAP layer is needed by almost all Bluetooth protocols and profiles. There isn't any real use case without having L2CAP loaded. SCO is only essential for Audio transfers, but it is so small that we can have it loaded always in bluetooth.ko without problems. If you really doesn't want it you can disable SCO in the kernel config. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-14Bluetooth: sco: fix information leak to userspaceVasiliy Kulikov
struct sco_conninfo has one padding byte in the end. Local variable cinfo of type sco_conninfo is copied to userspace with this uninizialized one byte, leading to old stack contents leak. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-14Bluetooth: bnep: fix buffer overflowVasiliy Kulikov
Struct ca is copied from userspace. It is not checked whether the "device" field is NULL terminated. This potentially leads to BUG() inside of alloc_netdev_mqs() and/or information leak by creating a device with a name made of contents of kernel stack. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-11Bluetooth: l2cap: fix 1 byte infoleak to userspaceVasiliy Kulikov
Structure l2cap_options has one padding byte between max_tx and txwin_size fields. This byte in "opts" is copied to userspace uninitialized. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-09mac80211: Ensure power-level set properly for scanning.Ben Greear
My previous patch to optimize scanning on operating channel accidentally removed the code that would ensure power was set to maximum for scanning. This patch re-adds that functionality. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-09mac80211: Allow work items to use existing channel type.Ben Greear
Narrow channel types can function within larger channel types. So, use existing channel type for work items when possible. This decreases hardware channel changes significantly when using non NO_HT channel types on the operating channel. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-09mac80211: Allow scanning on existing channel-type.Ben Greear
Previous code set the channel type to NO_HT, but it appears that NO_HT packets can be sent on any channel type, so we do not need to change the channel type as long as the channel is correct. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-02-12 05:43:26 +0000