summaryrefslogtreecommitdiffstats
path: root/net
AgeCommit message (Collapse)Author
2012-09-27Bluetooth: Use %pMR in sprintf/seq_printf instead of batostrAndrei Emeltchenko
Instead of old unsafe batostr function use %pMR print specifier for printing Bluetooth addresses in sprintf and seq_printf statements. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: Use %pMR in debug instead of batostrAndrei Emeltchenko
Instead of old unsafe batostr function use %pMR print specifier for printing Bluetooth addresses in debug and error statements. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: Force the process of unpair command if disconnect failedJefferson Delfes
The unpair process tries to disconnect any connection pending with remote. If there are some connection in connecting state, disconnect command will fail and unpair mgmt command will stay pending. That pending mgmt command can cause strange behavior like automatic unpair after a lost connection. Signed-off-by: Jefferson Delfes <jefferson.delfes@openbossa.org> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: Fix two warnings in BT_DBGGustavo Padovan
We just need to use the right modifiers Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: AMP: Handle Accept phylink command status evtAndrei Emeltchenko
When receiving HCI Command Status event for Accept Physical Link execute HCI Write Remote AMP Assoc with data saved from A2MP Create Physical Link Request. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: AMP: Accept Physical LinkAndrei Emeltchenko
When receiving A2MP Create Physical Link message execute HCI Accept Physical Link command to AMP controller. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: AMP: Process Chan Selected eventAndrei Emeltchenko
Channel Selected event indicates that link information data is available. Read it with Read Local AMP Assoc command. The data shall be sent in the A2MP Create Physical Link Request. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: A2MP: Add fallback to normal l2cap init sequenceAndrei Emeltchenko
When there is no remote AMP controller found fallback to normal L2CAP sequence. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: AMP: Write remote AMP AssocAndrei Emeltchenko
When receiving HCI Command Status after HCI Create Physical Link execute HCI Write Remote AMP Assoc command to AMP controller. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: AMP: Create Physical LinkAndrei Emeltchenko
When receiving A2MP Get AMP Assoc Response execute HCI Create Physical Link to AMP controller. Define function which will run when receiving HCI Command Status. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: AMP: Add AMP key calculationAndrei Emeltchenko
Function calculates AMP keys using hmac_sha256 helper. Calculated keys are Generic AMP Link Key (gamp) and Dedicated AMP Link Key with keyID "802b" for 802.11 PAL. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: Add function to derive AMP key using hmacDmitry Kasatkin
hmac(sha256) will be used for AMP key generation. Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: Choose connection based on capabilitiesAndrei Emeltchenko
Choose which L2CAP connection to establish by checking support for HS and remote side supported features. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: A2MP: Process A2MP Get AMP Assoc RspAndrei Emeltchenko
When receiving A2MP Get AMP Assoc Response save assoc data to remote AMP controller list and prepare for creating physical link. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: A2MP: Process A2MP Getinfo RspAndrei Emeltchenko
Process A2MP Getinfo Response, send Get AMP Assoc Req. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: AMP: Handle create / disc phylink reqAndrei Emeltchenko
Use hci_conn structure to keep track about AMP physical connections. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: AMP: Remote AMP ctrl definitionsAndrei Emeltchenko
Create remote AMP controllers structure. It is used to keep information about discovered remote AMP controllers by A2MP protocol. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: AMP: Physical link struct and helpersAndrei Emeltchenko
Define physical link structures. Physical links are represented by hci_conn structure. For BR/EDR we use type ACL_LINK and for AMP we use AMP_LINK. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: A2MP: Process Discover ResponseAndrei Emeltchenko
When receiving A2MP Discover Response send A2MP Get Info Request for each AMP controller in the discovery list. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: AMP: Use HCI cmd to Read Loc AMP AssocAndrei Emeltchenko
When receiving A2MP Get AMP Assoc Request execute Read Local AMP Assoc HCI command to AMP controller. If the AMP Assoc data is larger than it can fit to HCI event only fragment is read. When all fragments are read send A2MP Get AMP Assoc Response. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: AMP: Use HCI cmd to Read AMP InfoAndrei Emeltchenko
When receiving A2MP Get Info Request execute Read Local AMP Info HCI command to AMP controller with function to be executed upon receiving command complete event. Function will handle A2MP Get Info Response. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: A2MP: Create amp_mgr global listAndrei Emeltchenko
Create amp_mgr_list global list which will be used by different hci devices to find amp_mgr. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-24Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
2012-09-24Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2012-09-18Bluetooth: Update management interface revisionJohan Hedberg
For each kernel release where commands or events are added to the management interface, the revision field should be increment by one. The increment should only happen once per kernel release and not for every command/event that gets added. The revision value is for informational purposes only, but this simple policy would make any future debugging a lot simple. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-18Bluetooth: mgmt: Implement support for passkey notificationJohan Hedberg
This patch adds support for Secure Simple Pairing with devices that have KeyboardOnly as their IO capability. Such devices will cause a passkey notification on our side and optionally also keypress notifications. Without this patch some keyboards cannot be paired using the mgmt interface. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Cc: stable@vger.kernel.org Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-14mac80211: allow re-open the blocked peer link in meshChun-Yeow Yeoh
Peer link which is blocked using the "iw mesh0 station set <MAC addr> plink_action block" is previously not able to re-open using "iw mesh0 station set <MAC addr> plink_action open". This patch is intended to solve this. If the station plink state remains at OPN_SNT once open, try block and open again should solve this problem. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-14mac80211: change locking around ieee80211_recalc_smpsJohannes Berg
Make the function acquire the necessary mutex itself to simplify the callers. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-14mac80211: handle power constraint/country IE betterJohannes Berg
Currently, mac80211 uses the power constraint IE, and reduces the regulatory max TX power by it. This can cause issues if the AP is advertising a large power constraint value matching a high TX power in its country IE, for example in this case: ... Country: US Environment: Indoor/Outdoor ... Channels [157 - 157] @ 30 dBm ... Power constraint: 13 dB ... What happened here is that our local regulatory TX power is 15 dBm, and gets reduced by 13 dB so we end up with only 2 dBm effective TX power, which is way too low. Instead, handle the country IE/power constraint IE combined and restrict our TX power to the max of the regulatory power and the maximum power advertised by the AP, in this case 17 dBm (= 30 dBm - 13 dB). Also print a message when this happens to let the user know and help us debug issues with it. Reported-by: Carl A. Cook <CACook@quantum-equities.com> Tested-by: Carl A. Cook <CACook@quantum-equities.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-11mac80211: remove unneeded CONFIG_PM ifdefJohannes Berg
The functions are only called if CONFIG_PM is set as the callers are under an ifdef, so there's no need to also define no-op functions. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-10mac80211: validate skb->dev in the tx status pathFelix Fietkau
skb->dev might contain a stale reference to a device that was already deleted, and using it unchecked can lead to invalid pointer accesses. Since this is only used for nl80211 tx, iterate over active interfaces to find a match for skb->dev, and discard the tx status if the device is gone. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-10mac80211: use call_rcu() on sta deletionEliad Peller
mac80211 calls synchronize_rcu() on sta deletion, which increase the roaming time significantly. Convert it into a call_rcu() mechanism, in order to avoid blocking. Since some of the cleanup functions might sleep, schedule from the call_rcu callback a new work that will do the actual cleanup. In order to make sure the cleanup occurs before the interface went down, flush local->workqueue on ieee80211_do_stop(). Signed-off-by: Yoni Divinsky <yoni.divinsky@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-10mac80211: add key flag for management keysJohannes Berg
Mark keys that might be used to receive management frames so drivers can fall back on software crypto for them if they don't support hardware offload. As the new flag is only set correctly for RX keys and the existing IEEE80211_KEY_FLAG_SW_MGMT flag can only affect TX, also rename the latter to IEEE80211_KEY_FLAG_SW_MGMT_TX. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-08Bluetooth: AMP: Add Read Data Block Size to amp_initAndrei Emeltchenko
Add Read Data Block Size HCI cmd to AMP initialization, then it makes possible to send data. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-08Bluetooth: trivial: Remove empty lineAndrei Emeltchenko
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-08Bluetooth: trivial: Make hci_chan_del return voidAndrei Emeltchenko
Return code is not needed in hci_chan_del Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-08Bluetooth: Remove unneeded zero initAndrei Emeltchenko
hdev is allocated with kzalloc so zero initialization is not needed. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-07Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-09-07Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2012-09-07mac80211: reply to AUTH with DEAUTH if sta allocation fails in IBSSAntonio Quartulli
Whenever a host gets an AUTH frame it first allocates a new station and then replies with another AUTH frame. However, if sta allocations fails the host should send a DEAUTH frame instead to tell the other end that something went wrong. Signed-off-by: Antonio Quartulli <ordex@autistici.org> [reword commit message a bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-07mac80211: move ieee80211_send_deauth_disassoc outside mlme codeAntonio Quartulli
Move ieee80211_send_deauth_disassoc() to util.c to make it available for the rest of the mac80211 code. Signed-off-by: Antonio Quartulli <ordex@autistici.org> [reword commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-07net/mac80211/scan.c: removes unnecessary semicolonPeter Senna Tschudin
removes unnecessary semicolon Found by Coccinelle: http://coccinelle.lip6.fr/ Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-06mac80211: refactor set_channel_typeMichal Kazior
Split functionality for further reuse. Will prevent code duplication when channel context channel_type merging is introduced. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-06mac80211: use synchronize_net() on key destroyingEliad Peller
__ieee80211_key_destroy() calls synchronize_rcu() in order to sync the tx path before destroying the key. However, synching the tx path can be done with synchronize_net() as well, which is usually faster (the timing might be important for roaming scenarios). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-06mac80211: check power constraint IE size when parsingJohannes Berg
The power constraint IE is always a single byte so check the size when parsing instead of later. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-06Merge remote-tracking branch 'wireless-next/master' into mac80211-nextJohannes Berg
2012-09-06mac80211: disconnect if channel switch failsJohannes Berg
Disconnect from the AP if channel switching in the driver failed or if the new channel is unavailable. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-06mac80211: don't hang on to sched_scan_iesJohannes Berg
There's no need to keep a copy of the scheduled scan IEs after the driver has been told, if it requires a copy it must make one. Therefore, we can move sched_scan_ies into the function. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-06Merge remote-tracking branch 'mac80211/master' into mac80211-nextJohannes Berg
Pull in mac80211.git to let the next patch apply without conflicts, also resolving a hwsim conflict. Conflicts: drivers/net/wireless/mac80211_hwsim.c Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-06mac80211: use list_move instead of list_del/list_addWei Yongjun
Using list_move() instead of list_del() + list_add(). spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-01-23 21:31:35 +0000