summaryrefslogtreecommitdiffstats
path: root/net
AgeCommit message (Collapse)Author
2012-11-07batman-adv: enable fast client detection using unicast_4addr packetsAntonio Quartulli
The "early client detection mechanism" can be extended to find new clients by means of unicast_4addr packets. The unicast_4addr packet contains as well as the broadcast packet (which is currently used in this mechanism) the address of the originating node and can therefore be used to install new entries in the Global Translation Table Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-11-07batman-adv: Add get_ethtool_stats() support for DATMartin Hundebøll
Added additional counters for D.A.T. Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-07batman-adv: Distributed ARP Table - add runtime switchAntonio Quartulli
This patch adds a runtime switch that enables the user to turn the DAT feature on or off at runtime Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-07batman-adv: Distributed ARP Table - add compile optionAntonio Quartulli
This patch makes it possible to decide whether to include DAT within the batman-adv binary or not. It is extremely useful when the user wants to reduce the size of the resulting module by cutting off any not needed feature. Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-07batman-adv: Distributed ARP Table - add snooping functions for ARP messagesAntonio Quartulli
In case of an ARP message going in or out the soft_iface, it is intercepted and a special action is performed. In particular the DHT helper functions previously implemented are used to store all the ARP entries belonging to the network in order to provide a fast and unicast lookup instead of the classic broadcast flooding mechanism. Each node stores the entries it is responsible for (following the DHT rules) in its soft_iface ARP table. This makes it possible to reuse the kernel data structures and functions for ARP management. Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-07batman-adv: Distributed ARP Table - add ARP parsing functionsAntonio Quartulli
ARP messages are now parsed to make it possible to trigger special actions depending on their types (snooping). Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-07batman-adv: Distributed ARP Table - implement local storageAntonio Quartulli
Since batman-adv cannot inter-operate with the host ARP table, this patch introduces a batman-adv private storage for ARP entries exchanged within DAT. This storage will represent the node local cache in the DAT protocol. Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-07batman-adv: Distributed ARP Table - create DHT helper functionsAntonio Quartulli
Add all the relevant functions in order to manage a Distributed Hash Table over the B.A.T.M.A.N.-adv network. It will later be used to store several ARP entries and implement DAT (Distributed ARP Table) Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-07batman-adv: Distributed ARP Table - add a new debug log levelAntonio Quartulli
A new log level has been added to concentrate messages regarding DAT: ARP snooping, requests, response and DHT related messages. The new log level is named BATADV_DBG_DAT Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-07batman-adv: add UNICAST_4ADDR packet typeAntonio Quartulli
The current unicast packet type does not contain the orig source address. This patches add a new unicast packet (called UNICAST_4ADDR) which provides two new fields: the originator source address and the subtype (the type of the data contained in the packet payload). The former is useful to identify the node which injected the packet into the network and the latter is useful to avoid creating new unicast packet types in the future: a macro defining a new subtype will be enough. Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-07batman-adv: Mark correctly aligned headers not as __packedSven Eckelmann
Headers which are already perfectly aligned and create a 4 byte boundary non-ethernet header payload can have the __packed attribute removed. The __packed attribute doesn't change the appeareance of the packet for these headers because no extra padding is necessary to align the data members. The compiler will also create slightly faster code for loads of multi-byte members. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-07batman-adv: Reserve extra bytes in skb for better alignmentSven Eckelmann
The ethernet header is 14 bytes long. Therefore, the data after it is not 4 byte aligned and may cause problems on systems without unaligned data access. Reserving NET_IP_ALIGN more byes can fix the misalignment of the ethernet header. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-07mac80211: fix TX error pathJohannes Berg
One error path in ieee80211_subif_start_xmit() will double-free the SKB. Set it to NULL to prevent that. This issue was introduced by my channel context changes. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-07mac80211: include export.h in aes_cmacEmmanuel Grumbach
This is needed since this file exports functions. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-07mac80211: use kstrtoull return valueJohannes Berg
If kstrtoull() returns an error code (a value smaller than zero), use it since it can be an error other than -EINVAL. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-07mac80211: fix race in TKIP MIC test debugfs fileJohannes Berg
Accessing sdata->vif.bss_conf.bssid without any protection here is racy, use u.mgd.associated instead and lock the correct mutex for it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-07mac80211: use mac_ptonJohannes Berg
Instead of implementing practically the same function (hwaddr_aton) use mac_pton. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-07nl80211: send the NL80211_ATTR_SSID in nl80211_send_iface()Antonio Quartulli
The userspace may want to know what is the current ssid that a given interface is using. This patch enables nl80211 to send the NL80211_ATTR_SSID attribute in nl80211_send_iface(). Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-07cfg80211: store the ssid into wirless_dev in AP modeAntonio Quartulli
Store the configured ssid in wdev->ssid when starting an AP Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-06htb: fix two bugsEric Dumazet
Commit 56b765b79e9 (htb: improved accuracy at high rates) introduced two bugs : 1) one bstats_update() was inadvertently removed from htb_dequeue_tree(), breaking statistics/rate estimation. 2) Missing qdisc_put_rtab() calls in htb_change_class(), leaking kernel memory, now struct htb_class no longer retains pointers to qdisc_rate_table structs. Since only rate is used, dont use qdisc_get_rtab() calls copying data we ignore anyway. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vimalkumar <j.vimal@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-06mac80211: pass P2P powersave parameters to driverJohannes Berg
While connected to a GO, parse the P2P NoA attribute and pass the CT Window and opportunistic powersave parameters to the driver. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-06wireless: add utility function to get P2P attributeJohannes Berg
Parsing the P2P attributes can be tricky as their contents can be split across multiple (vendor) IEs. Thus, it's not possible to parse them like IEs (by returning a pointer to the data.) Instead, provide a function that copies the attribute data into a caller-provided buffer and returns the size needed (useful in case the buffer was too small.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-05cfg80211: allow registering more than one beacon listenerBen Greear
The commit: commit 5e760230e42cf759bd923457ca2753aacf2e656e Author: Johannes Berg <johannes.berg@intel.com> Date: Fri Nov 4 11:18:17 2011 +0100 cfg80211: allow registering to beacons allowed only a single process to register for beacon events per wiphy. This breaks cases where a user may want two or more VIFs on a wiphy and run a seperate hostapd process on each vif. This patch allows multiple beacon listeners, fixing the regression. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-05mac80211: implement set_mcast_rate() callbackAntonio Quartulli
This new callback can be used to tune the rate to be used to send multicast frames. In the current state the multicast rate can be specified on IBSS/MESH joining only. This makes it impossible to select a custom multicast rate when then join command is sent by an external program (e.g. wpa_supplicant) Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-05nl/cfg80211: add the NL80211_CMD_SET_MCAST_RATE commandAntonio Quartulli
This command triggers a new callback: set_mcast_rate(). It enables the user to change the rate used to send multicast frames for vif configured as IBSS or MESH_POINT Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-05mac80211: sync acccess to tx_filtered/ps_tx_buf queuesArik Nemtsov
These are accessed without a lock when ending STA PSM. If the sta_cleanup timer accesses these lists at the same time, we might crash. This may fix some mysterious crashes we had during ieee80211_sta_ps_deliver_wakeup. Cc: stable@vger.kernel.org Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-05mac80211: send deauth only with channel contextJohannes Berg
When userspace asks to deauthenticate and we're just authenticated (or still authenticating) send a deauth frame instead of deleting the auth request. On the other hand, if we've just disassociated and therefore deleted all our state already, drop the deauth request because we no longer have a channel context to send it on. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-04SUNRPC: Clean up rpc_bind_new_programTrond Myklebust
We can and should use the rpc_create_args and __rpc_clone_client() to change the program and version number on the resulting rpc_client. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04SUNRPC: remove BUG_ON from rpc_call_syncWeston Andros Adamson
Use WARN_ON_ONCE instead of calling BUG_ON and return -EINVAL when RPC_TASK_ASYNC flag is passed to rpc_call_sync. Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04SUNRPC: remove BUG_ON in rpc_release_taskWeston Andros Adamson
Replace BUG_ON() with WARN_ON_ONCE(). Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04SUNRPC: remove BUG_ON in svc_delete_xprtWeston Andros Adamson
Replace BUG_ON() with WARN_ON_ONCE(). Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04SUNRPC: remove BUG_ONs checking RPC_IS_QUEUEDWeston Andros Adamson
Replace two BUG_ON() calls with WARN_ON_ONCE() and early returns. Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04SUNRPC: remove BUG_ON from __rpc_sleep_on_priorityWeston Andros Adamson
Replace BUG_ON() with WARN_ON_ONCE(). Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04SUNRPC: remove BUG_ON in svc_registerWeston Andros Adamson
Instead of calling BUG_ON(), do a WARN_ON_ONCE() and return -EINVAL. Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04SUNRPC: remove BUG_ON from encode_rpcb_stringWeston Andros Adamson
Replace BUG_ON() with WARN_ON_ONCE() and truncate the encoded string if len > max. Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04SUNRPC: remove BUG_ON from bc_mallocWeston Andros Adamson
Replace BUG_ON() with WARN_ON_ONCE() and NULL return - the caller will handle this like a memory allocation failure. Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04SUNRPC: remove BUG_ON in xdr_shrink_bufheadWeston Andros Adamson
Replace bounds checking BUG_ON() with a WARN_ON_ONCE() and resetting the requested len to the max. Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04SUNRPC: remove BUG_ONs checking RPCSVC_MAXPAGESWeston Andros Adamson
Replace two bounds checking BUG_ON() calls with WARN_ON_ONCE() and resetting the requested size to RPCSVC_MAXPAGES. Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04SUNRPC: remove BUG_ON in svc_xprt_receivedWeston Andros Adamson
Replace BUG_ON() with a WARN_ON_ONCE() and early return. Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04SUNRPC: remove BUG_ONs from *_reclassify_socket*Weston Andros Adamson
Replace multiple BUG_ON() calls with WARN_ON_ONCE() and early return when sanity checking socket ownership (lock). The bind call will fail if the socket was unsuccessfully reclassified. Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04SUNRPC: remove BUG_ON from svc_pool_map_set_cpumaskWeston Andros Adamson
Replace BUG_ON() with a WARN() and early return. Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04SUNRPC: remove two BUG_ON assertsWeston Andros Adamson
Replace two BUG_ON() calls checking the RPC_BC_PA_IN_USE flag with WARN_ON_ONCE(). Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04SUNRPC: remove BUG_ON in rpc_put_sb_netWeston Andros Adamson
Replace BUG_ON() with WARN_ON() - the condition is definitely a misuse of the API, but shouldn't cause a crash. Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04SUNRPC: remove BUG_ON calls from cache_readWeston Andros Adamson
Replace BUG_ON() with WARN_ON_ONCE() in two parts of cache_read(). Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04SUNRPC: remove BUG_ON from bc_sendWeston Andros Adamson
Replace BUG_ON() with WARN_ON_ONCE(). The error condition is a simple ref counting sanity check and the following code will not free anything until final put. Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04SUNRPC: remove BUG_ON from xprt_destroy_backchannelWeston Andros Adamson
If max_reqs is 0, do nothing besides the usual dprintks. Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04SUNRPC: remove BUG_ON from rpc_sleep_on*Weston Andros Adamson
Replace BUG_ON() with WARN_ON_ONCE() and clean up after inactive task. Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04SUNRPC: remove BUG_ON from call_bc_transmitWeston Andros Adamson
Remove redundant BUG_ON(). Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04SUNRPC: remove BUG_ON from call_bc_transmitWeston Andros Adamson
Replace BUG_ON() with WARN_ON_ONCE(). Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04SUNRPC: remove BUG_ON from call_transmitWeston Andros Adamson
Remove unneeded BUG_ON() Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>