summaryrefslogtreecommitdiffstats
path: root/net
AgeCommit message (Collapse)Author
2011-05-10net: fix two lockdep splatsEric Dumazet
Commit e67f88dd12f6 (net: dont hold rtnl mutex during netlink dump callbacks) switched rtnl protection to RCU, but we forgot to adjust two rcu_dereference() lockdep annotations : inet_get_link_af_size() or inet_fill_link_af() might be called with rcu_read_lock or rtnl held, so use rcu_dereference_rtnl() instead of rtnl_dereference() Reported-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-10ipv4: xfrm: Eliminate ->rt_src reference in policy code.David S. Miller
Rearrange xfrm4_dst_lookup() so that it works by calling a helper function __xfrm_dst_lookup() that takes an explicit flow key storage area as an argument. Use this new helper in xfrm4_get_saddr() so we can fetch the selected source address from the flow instead of from rt->rt_src Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-10sctp: Remove rt->rt_src usage in sctp_v4_get_saddr()David S. Miller
Flow key is available, so fetch it from there. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-10ipv4: udp: Eliminate remaining uses of rt->rt_srcDavid S. Miller
We already track and pass around the correct flow key, so simply use it in udp_send_skb(). Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-10ipv4: icmp: Eliminate remaining uses of rt->rt_srcDavid S. Miller
On input packets, rt->rt_src always equals ip_hdr(skb)->saddr Anything that mangles or otherwise changes the IP header must relookup the route found at skb_rtable(). Therefore this invariant must always hold true. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-10ipv4: Pass explicit daddr arg to ip_send_reply().David S. Miller
This eliminates an access to rt->rt_src. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09net: add mac_pton() for parsing MAC addressAlexey Dobriyan
mac_pton() parses MAC address in form XX:XX:XX:XX:XX:XX and only in that form. mac_pton() doesn't dirty result until it's sure string representation is valid. mac_pton() doesn't care about characters _after_ last octet, it's up to caller to deal with it. mac_pton() diverges from 0/-E return value convention. Target usage: if (!mac_pton(str, whatever->mac)) return -EINVAL; /* ->mac being u8 [ETH_ALEN] is filled at this point. */ /* optionally check str[3 * ETH_ALEN - 1] for termination */ Use mac_pton() in pktgen and netconsole for start. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09vlan: remove one synchronize_net() callEric Dumazet
At VLAN dismantle phase, unregister_vlan_dev() makes one synchronize_net() call after vlan_group_set_device(grp, vlan_id, NULL). This call can be safely removed because we are calling unregister_netdevice_queue() to queue device for deletion, and this process needs at least one rcu grace period to complete. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ben Greear <greearb@candelatech.com> Cc: Patrick McHardy <kaber@trash.net> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Jesse Gross <jesse@nicira.com> Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09garp: remove one synchronize_rcu() callEric Dumazet
Speedup vlan dismantling in CONFIG_VLAN_8021Q_GVRP=y cases, by using a call_rcu() to free the memory instead of waiting with expensive synchronize_rcu() [ while RTNL is held ] Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ben Greear <greearb@candelatech.com> Cc: Patrick McHardy <kaber@trash.net> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09net: use batched device unregister in veth and macvlanEric Dumazet
veth devices dont use the batched device unregisters yet. Since veth are a pair of devices, it makes sense to use a batch of two unregisters, this roughly divides dismantle time by two. Fix this by changing dellink() callers to always provide a non NULL head. (Idea from Michał Mirosław) This patch also handles macvlan case : We now dismantle all macvlans on top of a lower dev at once. Reported-by: Alex Bligh <alex@alex.org.uk> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Michał Mirosław <mirqus@gmail.com> Cc: Jesse Gross <jesse@nicira.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ben Greear <greearb@candelatech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08sctp: Fix debug message args.David S. Miller
I messed things up when I converted over to the transport flow, I passed the ipv4 address value instead of it's address. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08ipv4: Pass flow key down into ip_append_*().David S. Miller
This way rt->rt_dst accesses are unnecessary. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08ipv4: Pass flow keys down into datagram packet building engine.David S. Miller
This way ip_output.c no longer needs rt->rt_{src,dst}. We already have these keys sitting, ready and waiting, on the stack or in a socket structure. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08udp: Use flow key information instead of rt->rt_{src,dst}David S. Miller
We have two cases. Either the socket is in TCP_ESTABLISHED state and connect() filled in the inet socket cork flow, or we looked up the route here and used an on-stack flow. Track which one it was, and use it to obtain src/dst addrs. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08net: Allow ethtool to set interface in loopback mode.Mahesh Bandewar
This patch enables ethtool to set the loopback mode on a given interface. By configuring the interface in loopback mode in conjunction with a policy route / rule, a userland application can stress the egress / ingress path exposing the flows of the change in progress and potentially help developer(s) understand the impact of those changes without even sending a packet out on the network. Following set of commands illustrates one such example - a) ip -4 addr add 192.168.1.1/24 dev eth1 b) ip -4 rule add from all iif eth1 lookup 250 c) ip -4 route add local 0/0 dev lo proto kernel scope host table 250 d) arp -Ds 192.168.1.100 eth1 e) arp -Ds 192.168.1.200 eth1 f) sysctl -w net.ipv4.ip_nonlocal_bind=1 g) sysctl -w net.ipv4.conf.all.accept_local=1 # Assuming that the machine has 8 cores h) taskset 000f netserver -L 192.168.1.200 i) taskset 00f0 netperf -t TCP_CRR -L 192.168.1.100 -H 192.168.1.200 -l 30 Signed-off-by: Mahesh Bandewar <maheshb@google.com> Acked-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08pktgen: use %pI6c for printing IPv6 addressesAlexey Dobriyan
I don't know why %pI6 doesn't compress, but the format specifier is kernel-standard, so use it. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08Merge branch 'batman-adv/next' of git://git.open-mesh.org/ecsv/linux-mergeDavid S. Miller
2011-05-08tcp: Use cork flow info instead of rt->rt_dst in tcp_v4_get_peer()David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08sctp: Don't use rt->rt_{src,dst} in sctp_v4_xmit()David S. Miller
Now we can pick it out of the transport's flow key. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08ipv4: Don't use rt->rt_{src,dst} in ip_queue_xmit().David S. Miller
Now we can pick it out of the provided flow key. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08inet: Pass flowi to ->queue_xmit().David S. Miller
This allows us to acquire the exact route keying information from the protocol, however that might be managed. It handles all of the possibilities, from the simplest case of storing the key in inet->cork.fl to the more complex setup SCTP has where individual transports determine the flow. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08ipv4: Use inet_csk_route_child_sock() in DCCP and TCP.David S. Miller
Operation order is now transposed, we first create the child socket then we try to hook up the route. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08ipv4: Create inet_csk_route_child_sock().David S. Miller
This is just like inet_csk_route_req() except that it operates after we've created the new child socket. In this way we can use the new socket's cork flow for proper route key storage. This will be used by DCCP and TCP child socket creation handling. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08sctp: Store a flowi in transports to provide persistent keying.David S. Miller
Several future simplifications are possible now because of this. For example, the sctp_addr unions can simply refer directly to the flowi information. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08ipv4: Use cork flow in ip_queue_xmit()David S. Miller
All invokers of ip_queue_xmit() must make certain that the socket is locked. All of SCTP, TCP, DCCP, and L2TP now make sure this is the case. Therefore we can use the cork flow during output route lookup in ip_queue_xmit() when the socket route check fails. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08ipv4: Use cork flow in inet_sk_{reselect_saddr,rebuild_header}()David S. Miller
These two functions must be invoked only when the socket is locked (because socket identity modifications are made non-atomically). Therefore we can use the cork flow for output route lookups. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08ipv4: Lock socket and use cork flow in ip4_datagram_connect().David S. Miller
This is to make sure that an l2tp socket's inet cork flow is fully filled in, when it's encapsulated in UDP. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08l2tp: Use cork flow in l2tp_ip_connect() and l2tp_ip_sendmsg()David S. Miller
Now that the socket is consistently locked in these two routines, this transformation is legal. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08l2tp: Fix locking in l2tp_core.cDavid S. Miller
l2tp_xmit_skb() must take the socket lock. It makes use of ip_queue_xmit() which expects to execute in a socket atomic context. Since we execute this function in software interrupts, we cannot use the usual lock_sock()/release_sock() sequence, instead we have to use bh_lock_sock() and see if a user has the socket locked, and if so drop the packet. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08l2tp: Fix locking in l2tp_ip.cDavid S. Miller
Both l2tp_ip_connect() and l2tp_ip_sendmsg() must take the socket lock. They both modify socket state non-atomically, and in particular l2tp_ip_sendmsg() increments socket private counters without using atomic operations. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08tcp: Use cork flow in tcp_v4_connect()David S. Miller
Since this is invoked from inet_stream_connect() the socket is locked and therefore this usage is safe. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08dccp: Use cork flow in dccp_v4_connect()David S. Miller
Since this is invoked from inet_stream_connect() the socket is locked and therefore this usage is safe. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08ethtool: remove phys_id from ethtool_opsStephen Hemminger
After that all the upstream kernel drivers now use phys_id, and the old ethtool_ops interface (phys_id) can be removed. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08batman-adv: remove duplicate code from function is_bidirectional_neigh()Daniele Furlan
In function is_bidirectional_neigh the code that find out the one hop neighbor is duplicated. Signed-off-by: Daniele Furlan <daniele.furlan@gmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-08batman-adv: Remove multiline comments from line endingSven Eckelmann
It is slightly irritating that comments after a long line span over multiple lines without any code. It is easier to put them before the actual code and reduce the number of lines which the eye has to read. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-08batman-adv: rename everything from *hna* into *tt* (translation table)Antonio Quartulli
To be coherent, all the functions/variables/constants have been renamed to the TranslationTable style Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-08batman-adv: Fix refcount imbalance in find_routerMarek Lindner
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-08batman-adv: Avoid deadlock between rtnl_lock and s_activeSven Eckelmann
The hard_if_event is called by the notifier with rtnl_lock and tries to remove sysfs entries when a NETDEV_UNREGISTER event is received. This will automatically take the s_active lock. The s_active lock is also used when a new interface is added to a meshif through sysfs. In that situation we cannot wait for the rntl_lock before creating the actual batman-adv interface to prevent a deadlock. It is still possible to try to get the rtnl_lock and immediately abort the current operation when the trylock call failed. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-08batman-adv: Remove unnecessary hardif_list_lockSven Eckelmann
hardif_list_lock is unneccessary because we already ensure that no multiple admin operations can take place through rtnl_lock. hardif_list_lock only adds additional overhead and complexity. Critical functions now check whether they are called with rtnl_lock using ASSERT_RTNL. It indirectly fixes the problem that orig_hash_del_if() expects that only one interface is deleted from hardif_list at a time, but hardif_remove_interfaces() removes all at once and then calls orig_hash_del_if(). Reported-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-08batman-adv: multi vlan support for bridge loop detectionMarek Lindner
The bridge loop detection for batman-adv allows the bat0 interface to be bridged into an ethernet segment which other batman-adv nodes are connected to. In order to also allow multiple VLANs on top of the bat0 interface to be bridged into the ethernet segment this patch extends the aforementioned bridge loop detection. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-08batman-adv: remove misplaced commentMarek Lindner
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-06ipv4: Initialize cork->opt using NULL not 0.David S. Miller
Noticed by Joe Perches. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-06ipv4: Initialize on-stack cork more efficiently.David S. Miller
ip_setup_cork() explicitly initializes every member of inet_cork except flags, addr, and opt. So we can simply set those three members to zero instead of using a memset() via an empty struct assignment. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
2011-05-06inet: Decrease overhead of on-stack inet_cork.David S. Miller
When we fast path datagram sends to avoid locking by putting the inet_cork on the stack we use up lots of space that isn't necessary. This is because inet_cork contains a "struct flowi" which isn't used in these code paths. Split inet_cork to two parts, "inet_cork" and "inet_cork_full". Only the latter of which has the "struct flowi" and is what is stored in inet_sock. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
2011-05-05Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/tg3.c
2011-05-05Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2011-05-05net: Add sendmmsg socket system callAnton Blanchard
This patch adds a multiple message send syscall and is the send version of the existing recvmmsg syscall. This is heavily based on the patch by Arnaldo that added recvmmsg. I wrote a microbenchmark to test the performance gains of using this new syscall: http://ozlabs.org/~anton/junkcode/sendmmsg_test.c The test was run on a ppc64 box with a 10 Gbit network card. The benchmark can send both UDP and RAW ethernet packets. 64B UDP batch pkts/sec 1 804570 2 872800 (+ 8 %) 4 916556 (+14 %) 8 939712 (+17 %) 16 952688 (+18 %) 32 956448 (+19 %) 64 964800 (+20 %) 64B raw socket batch pkts/sec 1 1201449 2 1350028 (+12 %) 4 1461416 (+22 %) 8 1513080 (+26 %) 16 1541216 (+28 %) 32 1553440 (+29 %) 64 1557888 (+30 %) We see a 20% improvement in throughput on UDP send and 30% on raw socket send. [ Add sparc syscall entries. -DaveM ] Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-05net: call dev_alloc_name from register_netdeviceJiri Pirko
Force dev_alloc_name() to be called from register_netdevice() by dev_get_valid_name(). That allows to remove multiple explicit dev_alloc_name() calls. The possibility to call dev_alloc_name in advance remains. This also fixes veth creation regresion caused by 84c49d8c3e4abefb0a41a77b25aa37ebe8d6b743 Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-05Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/libertas/if_cs.c drivers/net/wireless/rtlwifi/pci.c net/bluetooth/l2cap_sock.c
2011-05-05mac80211: Fix a warning due to skipping tailroom reservation for IVMohammed Shafi Shajakhan
The devices that require IV generation in software need tailroom reservation for ICVs used in TKIP or WEP encryptions. Currently, decision to skip the tailroom reservation in the tx path was taken only on whether driver wants MMIC to be generated in software or not. Following patch appends IV generation check for such decisions and fixes the following warning. WARNING: at net/mac80211/wep.c:101 ieee80211_wep_add_iv+0x56/0xf3() Hardware name: 64756D6 Modules linked in: ath9k ath9k_common ath9k_hw Pid: 0, comm: swapper Tainted: G W 2.6.39-rc5-wl Call Trace: [<c102fd29>] warn_slowpath_common+0x65/0x7a [<c1465c4e>] ? ieee80211_wep_add_iv+0x56/0xf3 [<c102fd4d>] warn_slowpath_null+0xf/0x13 [<c1465c4e>] ieee80211_wep_add_iv+0x56/0xf3 [<c1466007>] ieee80211_crypto_wep_encrypt+0x63/0x88 [<c1478bf3>] ieee80211_tx_h_encrypt+0x2f/0x63 [<c1478cba>] invoke_tx_handlers+0x93/0xe1 [<c1478eda>] ieee80211_tx+0x4b/0x6d [<c147907c>] ieee80211_xmit+0x180/0x188 [<c147779d>] ? ieee80211_skb_resize+0x95/0xd9 [<c1479edf>] ieee80211_subif_start_xmit+0x64f/0x668 [<c13956fc>] dev_hard_start_xmit+0x368/0x48c [<c13a8bd6>] sch_direct_xmit+0x4d/0x101 [<c1395ae1>] dev_queue_xmit+0x2c1/0x43f [<c13a74a2>] ? eth_header+0x1e/0x90 [<c13a7400>] ? eth_type_trans+0x91/0xc2 [<c13a7484>] ? eth_rebuild_header+0x53/0x53 [<c139f079>] neigh_resolve_output+0x223/0x27e [<c13c6b23>] ip_finish_output2+0x1d4/0x1fe [<c13c6bc6>] ip_finish_output+0x79/0x7d [<c13c6cbe>] T.1075+0x43/0x48 [<c13c6e6e>] ip_output+0x75/0x7b [<c13c4970>] dst_output+0xc/0xe [<c13c62c9>] ip_local_out+0x17/0x1a [<c13c67bb>] ip_queue_xmit+0x2aa/0x2f8 [<c138b742>] ? sk_setup_caps+0x21/0x92 [<c13d95ea>] ? __tcp_v4_send_check+0x7e/0xb7 [<c13d5d2e>] tcp_transmit_skb+0x6a1/0x6d7 [<c13d533b>] ? tcp_established_options+0x20/0x8b [<c13d6f28>] tcp_retransmit_skb+0x43a/0x527 [<c13d8d6d>] tcp_retransmit_timer+0x32e/0x45d [<c13d8f23>] tcp_write_timer+0x87/0x16c [<c103a030>] run_timer_softirq+0x156/0x1f9 [<c13d8e9c>] ? tcp_retransmit_timer+0x45d/0x45d [<c1034d65>] __do_softirq+0x97/0x14a [<c1034cce>] ? irq_enter+0x4d/0x4d Cc: Yogesh Powar <yogeshp@marvell.com> Reported-by: Fabio Rossi <rossi.f@inwind.it> Tested-by: Fabio Rossi <rossi.f@inwind.it> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-07 22:50:56 +0000