summaryrefslogtreecommitdiffstats
path: root/net
AgeCommit message (Collapse)Author
2011-02-18mac80211: Add power to debugfs.Ben Greear
Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-next-2.6
2011-02-17Bluetooth: fix checkpatch errors in af_bluetooth.cGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-17Bluetooth: Fix errors reported by checkpatch.plGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-17Bluetooth: fix errors reported by checkpatch.plGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-17Bluetooth: Fix some code style issues in hci_event.cSzymon Janc
Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-17Bluetooth: Fix some code style issues in hci_core.cSzymon Janc
Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-17Bluetooth: Clean up hci_sniff_subrate_evt functionSzymon Janc
Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-17Bluetooth: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>Szymon Janc
As warned by checkpatch.pl, use #include <linux/uaccess.h> instead of <asm/uaccess.h>. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Send LE Connection Update CommandClaudio Takahasi
If the new connection update parameter are accepted, the LE master host sends the LE Connection Update Command to its controller informing the new requested parameters. Signed-off-by: Claudio Takahasi <claudio.takahasi@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Use proper timer for hci command timoutVille Tervo
Use proper timer instead of hci command flow control to timeout failed hci commands. Otherwise stack ends up sending commands when flow control is used to block new commands. 2010-09-01 18:29:41.592132 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 bdaddr 00:16:CF:E1:C7:D7 mode 2 clkoffset 0x0000 2010-09-01 18:29:41.592681 > HCI Event: Command Status (0x0f) plen 4 Remote Name Request (0x01|0x0019) status 0x00 ncmd 0 2010-09-01 18:29:51.022033 < HCI Command: Remote Name Request Cancel (0x01|0x001a) plen 6 bdaddr 00:16:CF:E1:C7:D7 Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Fix crash when ioctl(HCIUARTSETPROTO) failsGustavo F. Padovan
If the fail happens the HCI del_timer may timeout after the the hci dev unregister. This lead to a kernel crash. Reported-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Add connection parameter update responseClaudio Takahasi
Implements L2CAP Connection Parameter Update Response defined in the Bluetooth Core Specification, Volume 3, Part A, section 4.21. Address the LE Connection Parameter Procedure initiated by the slave. Connection Interval Minimum and Maximum have the same range: 6 to 3200. Time = N * 1.25ms. Minimum shall be less or equal to Maximum. The Slave Latency field shall have a value in the range of 0 to ((connSupervisionTimeout / connIntervalMax) - 1). Latency field shall be less than 500. connSupervisionTimeout = Timeout Multiplier * 10 ms. Multiplier field shall have a value in the range of 10 to 3200. Signed-off-by: Claudio Takahasi <claudio.takahasi@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Add LE signaling commands handlingClaudio Takahasi
This patch splits the L2CAP command handling function in order to have a clear separation between the commands related to BR/EDR and LE. Commands and responses in the LE signaling channel are not being handled yet, command reject is sent to all received requests. Bluetooth Core Specification, Volume 3, Part A, section 4 defines the signaling packets formats and allowed commands/responses over the LE signaling channel. Signed-off-by: Claudio Takahasi <claudio.takahasi@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Treat LE and ACL links separately on timeoutVille Tervo
Separate LE and ACL timeouts. Othervise ACL connections on non LE hw will time out after 45 secs. Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Fix initiated LE connectionsVinicius Costa Gomes
Fix LE connections not being marked as master. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Do not send disconn comand over LE linksVille Tervo
l2cap over LE links can be disconnected without sending disconnect command first. Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Add server socket support for LE connectionVille Tervo
Add support for LE server sockets. Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Add LE connection support to L2CAPVille Tervo
Add basic LE connection support to L2CAP. LE connection can be created by specifying cid in struct sockaddr_l2 Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Use LE buffers for LE trafficVille Tervo
Bluetooth chips may have separate buffers for LE traffic. This patch add support to use LE buffers provided by the chip. Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Add LE connect supportVille Tervo
Bluetooth V4.0 adds support for Low Energy (LE) connections. Specification introduces new set of hci commands to control LE connection. This patch adds logic to create, cancel and disconnect LE connections. Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-15Bluetooth: Add L2CAP mode to debugfs outputGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-15Bluetooth: remove l2cap_load() hackGustavo F. Padovan
l2cap_load() was added to trigger l2cap.ko module loading from the RFCOMM and BNEP modules. Now that L2CAP module is gone, we don't need it anymore. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-14mac80211: reply to directed probes in IBSSJohannes Berg
WFA certification and the WMM spec require that we always reply to unicast probe requests, so do that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-14mac80211: Remove superfluous if clauseHelmut Schaa
ieee80211_rx_h_check returned RX_DROP_MONITOR in case the if statement in question was true but the same return value is also used directly after the if clause. Hence, we can just drop the whole if clause and as such simplify the code. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-14Bluetooth: Merge L2CAP and SCO modules into bluetooth.koGustavo F. Padovan
Actually doesn't make sense have these modules built separately. The L2CAP layer is needed by almost all Bluetooth protocols and profiles. There isn't any real use case without having L2CAP loaded. SCO is only essential for Audio transfers, but it is so small that we can have it loaded always in bluetooth.ko without problems. If you really doesn't want it you can disable SCO in the kernel config. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-14Bluetooth: sco: fix information leak to userspaceVasiliy Kulikov
struct sco_conninfo has one padding byte in the end. Local variable cinfo of type sco_conninfo is copied to userspace with this uninizialized one byte, leading to old stack contents leak. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-14Bluetooth: bnep: fix buffer overflowVasiliy Kulikov
Struct ca is copied from userspace. It is not checked whether the "device" field is NULL terminated. This potentially leads to BUG() inside of alloc_netdev_mqs() and/or information leak by creating a device with a name made of contents of kernel stack. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-11Bluetooth: l2cap: fix 1 byte infoleak to userspaceVasiliy Kulikov
Structure l2cap_options has one padding byte between max_tx and txwin_size fields. This byte in "opts" is copied to userspace uninitialized. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-09mac80211: Ensure power-level set properly for scanning.Ben Greear
My previous patch to optimize scanning on operating channel accidentally removed the code that would ensure power was set to maximum for scanning. This patch re-adds that functionality. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-09mac80211: Allow work items to use existing channel type.Ben Greear
Narrow channel types can function within larger channel types. So, use existing channel type for work items when possible. This decreases hardware channel changes significantly when using non NO_HT channel types on the operating channel. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-09mac80211: Allow scanning on existing channel-type.Ben Greear
Previous code set the channel type to NO_HT, but it appears that NO_HT packets can be sent on any channel type, so we do not need to change the channel type as long as the channel is correct. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-09mac80211: Properly set work-item channel-type.Ben Greear
Some were indirectly set to NO_HT (zero), but I think it's better to explicitly set it in case the enum ever changes. In cfg.c, it seems the channel-type was just ignored (and thus always set to NO_HT). Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-08Bluetooth: update Bluetooth daemon name in Kconfig helpGustavo F. Padovan
Change hcid to bluetoothd. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-08Bluetooth: move __l2cap_sock_close() to l2cap_sock.cGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-08Bluetooth: move l2cap_sock_kill() to l2cap_sock.cGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-08Bluetooth: move L2CAP sock timers function to l2cap_sock.cGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-08Bluetooth: move l2cap_sock_sendmsg() to l2cap_sock.cGustavo F. Padovan
Also moves some L2CAP sending functions declaration to l2cap.h Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-08Bluetooth: move l2cap_sock_shutdown() to l2cap_sock.cGustavo F. Padovan
Declare __l2cap_wait_ack() and l2cap_sock_clear_timer() in l2cap.h Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-08Bluetooth: move l2cap_sock_recvmsg() to l2cap_sock.cGustavo F. Padovan
It causes the move of the declaration of 3 functions to l2cap.h: l2cap_get_ident(), l2cap_send_cmd(), l2cap_build_conf_req() Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-08Bluetooth: move l2cap_sock_connect() to l2cap_sock.cGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-08Bluetooth: move l2cap_sock_getsockopt() to l2cap_sock.cGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-08Bluetooth: move l2cap_sock_setsockopt() to l2cap_sock.cGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-08Bluetooth: move l2cap_sock_getname() to l2cap_sock.cGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-08Bluetooth: move l2cap_sock_accept() to l2cap_sock.cGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-08Bluetooth: move l2cap_sock_bind()/listen() to l2cap_sock.cGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-08Bluetooth: move l2cap_sock_release() to l2cap_sock.cGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-08Bluetooth: move l2cap_sock_ops to l2cap_sock.cGustavo F. Padovan
First step to move all l2cap_sock_ops function to l2cap_sock.c Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-08Bluetooth: Initial work for L2CAP split.Gustavo F. Padovan
This patch tries to do the minimal to move l2cap_sock_create() and its dependencies to l2cap_sock.c. It create a API to initialize and cleanup the L2CAP sockets from l2cap_core.c through l2cap_init_sockets() and l2cap_cleanup_sockets(). Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-08Bluetooth: Rename l2cap.c to l2cap_core.cGustavo F. Padovan
In a preparation to the the L2CAP code split in many files. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-30 02:17:02 +0000