| Age | Commit message (Collapse) | Author |
|---|
|
Currently when using KCONFIG_ALLCONFIG with randconfig the choice options
are clobbered. As recommended by Roman, this adds an is_new test to see
whether to select a new option or obey the existing one.
This is a resend of the earlier patch a couple of weeks ago, since there
was no reply. Original thread is at http://lkml.org/lkml/2007/11/28/94
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Simplify "make ARCH=x86" and fix kconfig so we again can set 64BIT in
all.config.
For a fix the diffstat is nice:
6 files changed, 3 insertions(+), 36 deletions(-)
The patch reverts these commits:
- 0f855aa64b3f63d35a891510cf7db932a435c116 ("kconfig: add helper to set
config symbol from environment variable")
- 2a113281f5cd2febbab21a93c8943f8d3eece4d3 ("kconfig: use $K64BIT to
set 64BIT with all*config targets")
Roman Zippel pointed out that kconfig supported string compares so
the additional complexity introduced by the above two patches were
not needed.
With this patch we have following behaviour:
# make {allno,allyes,allmod,rand}config [ARCH=...]
option \ host arch | 32bit | 64bit
=====================================================
./. | 32bit | 64bit
ARCH=x86 | 32bit | 32bit
ARCH=i386 | 32bit | 32bit
ARCH=x86_64 | 64bit | 64bit
The general rule are that ARCH= and native architecture takes
precedence over the configuration.
So make ARCH=i386 [whatever] will always build a 32-bit kernel
no matter what the configuration says. The configuration will
be updated to 32-bit if it was configured to 64-bit and the
other way around.
This behaviour is consistent with previous behaviour so no
suprises here.
make ARCH=x86 will per default result in a 32-bit kernel but as
the only ARCH= value x86 allow the user to select between 32-bit
and 64-bit using menuconfig.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andreas Herrmann <aherrman@arcor.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
After unification of the Kconfig files and
introducing K64BIT support in kconfig
it required only trivial changes to enable
"make ARCH=x86".
With this patch you can build for x86_64 in several ways:
1) make ARCH=x86_64
2) make ARCH=x86 K64BIT=y
3) make ARCH=x86 menuconfig
=> select 64-bit
Likewise for i386 with the addition that
i386 is default is you say ARCH=x86.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
|
|
The variable K64BIT can now be used to select the
value of CONFIG_64BIT.
This is for example useful for powerpc to generate
allmodconfig for both bit sizes - like this:
make ARCH=powerpc K64BIT=y
make ARCH=powerpc K64BIT=n
To use this the Kconfig file must use "64BIT" as the
config value to select between 32 and 64 bit.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
|
|
Add conf_set_env_sym() that can set an already defined symbol
based on the value of an environment variable.
Unknown symbols are silently ignored.
A warning is printed if the value of the environment variable
is unexpected.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
|
|
This patch introduce no functional changes.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
|
|
After a small change in kconfig Makefile we could
move all x86 Kconfig files to x86 directory.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Do not hardcode the arch/$(ARCH)/Kconfig name all over
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
With some small changes to kconfig makefile we can now
locate the defconfig files for i386 and x86_64 in
the configs/ subdirectory under x86.
make ARCH=i386 defconfig and make defconfig
works as expected also after this change.
But arch maintainers shall now update a defconfig file in
the configs/ directory.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Put kernel version info on title bar in xconfig (qconf) instead of
defaulting to "qconf".
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
This reverts commit a5bf3d891a6a0fb5aa122792d965e3774108b923.
David Brownell notes that this causes a regression visible in the
drivers/usb/gadget Kconfig file:
"That Kconfig hasn't changed (other than adding new drivers), and it's
worked that way for several years now ... so the issue seems to be
changes in menuconfig/kconfig/etc semantics.
The issue is that when USB_GADGET=m, it's no longer possible to
configure peripheral controller drivers as modules ... the
controller drivers can now only be configured for static linkage.
It should be making a choice of one of the controller drivers which
could work on the target system, and allow that driver to be linked
either as a module (ok iff USB_GADGET=m) or statically."
Reverting this commit resolves the problem, and also fixes a second
problem that David noticed: various dependent options couldn't be enabled.
Tested-and-reported-by: David Brownell <david-b@pacbell.net>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Jan Beulich <jbeulich@novell.com>,
Cc: Andrew Morton <akpm@linux-foundation.org>,
Cc: Sam Ravnborg <sam@ravnborg.org>,
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Typo in comment in scripts/kconfig/Makefile.
Signed-off-by: Rob Landley <rob@landley.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
menuconfig currently represents options implied by another option ('select'
directive in Kconfig) by prefixing them with '---'. Unfortunately the same
notation is used for comments. If the implied option is module capable,
user can still switch between Y and M, all without any feedback until she
visits option's help. (try saying M to MAC80211 and then toggling
CFG80211)
This patch changes notation of selected-by-another items by introducing 2
new representations for implied options: {*} or {M} for options selected by
another modularized one, thus builtin or module capable, -*- or -M- for
options that cannot be at the moment changed by user.
The idea is to represent actual capability of the option by braces (dashes)
around and to always report actual state by * or M inside.
Signed-off-by: Matej Laitl <strohel@gmail.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Change kconfig behavior so that mixing bool and tristate config settings in
a choice is possible and has the desired effect of offering just the
tristate options individually if the choice gets set to M, and a normal
boolean selection if the choice gets set to Y.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Update _shipped files so regular user does not
need to have bison/flex/gperf installed.
Code changes were contained in previous commit.
Used following program versions (on fedora):
bison (GNU Bison) 2.3
flex 2.5.33
GNU gperf 3.0.2
Cc: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Remove the following redundant and never or rarely used kconfig syntax:
- "def_boolean" (same as "def_bool")
- "requires" (same as "depends on")
- "depends" (same as "depends on")
This patch contains the code changes and Kconfig updates.
The shipped files are in next patch to let actual codechange stand out.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
With specific configurations requesting help for certain
menu lines caused menuconfig to crash.
This was tracked down to a null pointer bug.
Thanks to "Miles Lane" <miles.lane@gmail.com> for inital reporting
and to Gabriel C <nix.or.die@googlemail.com> for the backtrace
that helped me locating the bug.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Matěj Laitl <strohel@gmail.com> noticed that there was no way
to distingush between comments and un-selectable menu lines.
This patch marks comments with *** comment ***
Cc: Matěj Laitl <strohel@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
cygwin provides the header file but the lib file needs
to be added manually. A generic fix is to check if
we can compile and link a program that uses gettext()
and if it fails fall back to NO_NLS.
International users of cygwin may have to specify
HOST_LOADLIBES := "-lintl" on the make command line.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Avoid setting the value if the symbol doesn't need to be changed or can't
be changed. Later choices may change the dependencies and thus the
possible input range.
make oldconfig from a 2.6.22 .config with CONFIG_HOTPLUG_CPU not set
was in some configurations setting CONFIG_HOTPLUG_CPU=y without asking,
even when there was no actual requirement for CONFIG_HOTPLUG_CPU.
This was triggered by SUSPEND_SMP that does a select HOTPLUG_CPU.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Tested-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
dep and dep2 in struct symbol was unused - remove them.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
|
|
Roman Zippel wrote:
> A simple example would be
> help texts, right now they are per symbol, but they should really be per
> menu, so archs can provide different help texts for something.
This patch does this and at the same time introduce a few API
funtions used to access the help text.
The relevant api functions are introduced in the various frontends.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
|
|
Normally generated values (Kconfig entries without a prompt) are cleared as
they are regenerated anyway and so they appear as new should they become
visible and defaults work as expected (once a value is set defaults aren't
used anymore).
The detection whether a value is generated or not is only based on its
visibility status, which can quickly change for a lot of symbols by just
removing a single line from .config or adding a dependency to Kconfig as you
noticed.
The patch now suppresses this logic when .config and Kconfig aren't in sync
and .config needs to be updated, so that you can remove now a random value
from .config and oldconfig won't reask for many other values.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Modify the ncurses configuration tool ('make menuconfig') in a way that the
user can enter the search string (/) both with or without the leading
'CONFIG_'.
This simplifies using copy & paste from .config files because you can
select the whole word.
Signed-off-by: Bernhard Walle <bwalle@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Massimo Maiurana <maiurana@gmail.com> reported that
update-po-config was broken:
1) spelling errors in Makefile so arch/um failed
2) UTF-8 was not supported
The following patch address the above problems.
kxgettext now append the output to the .pot file
generated by xgettext - so we have a header.
In all places UFT-8 is specifed so we now flawlessly
support UTF-8.
The Kconfig files had an empty string in a few cases -
these are now supressed in kxgettext.
With this the translators can now pick up where they left
and get it all translated.
There are ~11000 strings to be translated...
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Massimo Maiurana <maiurana@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
|
|
The "==" operator is not in POSIX, so use -eq instead.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
The check-lxdialog.sh script searches for "libFOO.so" which fails on OS X, due
to their special naming of libraries like "libfoo.dylib". This patch turns
the curses lib search into extensible loops and adds dylib as a valid
extension.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
I have found small bug in mconf, when you run it without any argument it
will sigsegv.
Without patch:
$ scripts/kconfig/mconf
Segmentation fault
With patch:
$ scripts/kconfig/mconf
can't find file (null)
Signed-off-by: Marcin Garski <mgarski@post.pl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Sample:
config FOO
bool "This is foo"
depends on BAR
config BAR
bool "This is bar"
depends on FOO
This will result in following error message:
error: found recursive dependency: FOO -> BAR -> FOO
And will then exit with exit code equal 1 so make will stop.
Inspired by patch from: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Adrian Bunk <bunk@stusta.de>
Cc: Roman Zippel <zippel@linux-m68k.org>
|
|
Correct a minor spelling mistake in a Kconfig warning message.
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Somewhat in reponse to kernel bugzilla #8197, be more explicit about
why 'make all' fails when there is no .config file.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
We do not support qt4 (yet) so the simple fix was to warn
that qt3 are missing.
The better fix would have been to implment qt4 support
but that has failed so far.
This solves http://bugzilla.kernel.org/show_bug.cgi?id=8277
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Nigel Cunningham <nigel@nigel.suspend2.net> noticed
that 'make mrproper' did not remove mconf.
Fixed so we now remove all relevant binaries.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Nigel Cunningham <nigel@nigel.suspend2.net>
|
|
Export and use the function conf_get_configname()
to retreive the default configuration filename.
Suggested by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
When loading an alternate configuration use that file as
current configuration filename.
Make the filename visible in the dialog.
Default continue to be .config.
Inspired by patch from: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
|
|
When changing current menu in search dialog update also main view
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
The index() function is obsolete, use strchr() instead.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
This patch fixes showing empty config list items if "Option/Show All
Options" is turned on. For example empty items appears on list of 'Block
Layer' menu.
Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Oleg Verych <olecom@flower.upol.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Do "Back" button behaviour normalization so it is enabled starting from
second-level menu only.
Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
qconf does not clear help text in search window if previous search has been
failed.
Signed-off-by: Cyrill V. Gorcunov <gorcunov@mail.ru>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Relocate the qconf search command to the "Edit"->"Find" menu option.
This is per the discussion on my qconf search dialog patch.
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In xconfig's display integer and string values are also shown as part of
the config item's descriptive text.
This patch updates the descriptive text, when the corresponding value has
been changed. Fix for http://bugzilla.kernel.org/show_bug.cgi?id=7744
Take2 uses updateList() so config values dependending on the changed value
see the change.
Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Back out the recent fix for this bug, fix it by correctly initialising
ConfigInfoView.sym.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: "Cyrill V. Gorcunov" <gorcunov@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
qconf may cause SIGSEGV by trying to show debug information on empty menu
items
Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
.config's changed state
Clean up a little.
Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
it in qconf.cc
Added function sets "void (*conf_changed_callback)(void)". Call it, if
.config's changed state changes. Use above in qconf.cc to set gui's
save-widget's sensitvity.
Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
functions only
Those two functions are
void sym_set_change_count(int count)
and
void sym_add_change_count(int count)
All write accesses to sym_change_count are replaced by calls to above
functions.
Variable and changer-functions are moved to confdata.c. IMO thats ok, as
sym_change_count is an attribute of the .config's change state.
Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Run "make xconfig" on a freshly untarred kernel-tree. Look at the floppy disk
icon of the qt application, that has just started: Its in a normal, active
state.
Mouse click on it: .config is being saved.
This patch series changes things so taht
after the mouse click on the floppy disk icon, the icon is greyed out.
If you mouse click on it now, nothing happens.
If you change some CONFIG_*, the floppy disk icon returns to "active state",
that is, if you mouse click it now, .config is written.
This patch:
Returns sym_change_count to reflect the .config's change state.
All read only accesses of
sym_change_count
are replaced by calls to
conf_get_changed()
.
mconfig.c is manipulated to ask for saving only when
conf_get_changed() returned true.
Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Might make qconf compilable with qt-3.1 as well as qt-3.3
Cc: greg chesson <xtp@google.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
On Mon, 13 Nov 2006, Phil Oester wrote:
> In commit 350b5b76384e77bcc58217f00455fdbec5cac594, the default menuconfig
> color scheme was changed to bluetitle. This breaks the highlighting
> of the selected item for me with TERM=vt100. The only way I can see
> which item is selected is via:
>
> make MENUCONFIG_COLOR=mono menuconfig
>
> Which restores the pre-2.6.19 white on black highlighting.
Fix.
Cc: Phil Oester <kernel@linuxace.com>
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
