summaryrefslogtreecommitdiffstats
path: root/scripts/kconfig
AgeCommit message (Collapse)Author
2007-12-23kconfig: obey KCONFIG_ALLCONFIG choices with randconfig.Paul Mundt
Currently when using KCONFIG_ALLCONFIG with randconfig the choice options are clobbered. As recommended by Roman, this adds an is_new test to see whether to select a new option or obey the existing one. This is a resend of the earlier patch a couple of weeks ago, since there was no reply. Original thread is at http://lkml.org/lkml/2007/11/28/94 Signed-off-by: Paul Mundt <lethal@linux-sh.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-17x86: simplify "make ARCH=x86" and fix kconfig all.configSam Ravnborg
Simplify "make ARCH=x86" and fix kconfig so we again can set 64BIT in all.config. For a fix the diffstat is nice: 6 files changed, 3 insertions(+), 36 deletions(-) The patch reverts these commits: - 0f855aa64b3f63d35a891510cf7db932a435c116 ("kconfig: add helper to set config symbol from environment variable") - 2a113281f5cd2febbab21a93c8943f8d3eece4d3 ("kconfig: use $K64BIT to set 64BIT with all*config targets") Roman Zippel pointed out that kconfig supported string compares so the additional complexity introduced by the above two patches were not needed. With this patch we have following behaviour: # make {allno,allyes,allmod,rand}config [ARCH=...] option \ host arch | 32bit | 64bit ===================================================== ./. | 32bit | 64bit ARCH=x86 | 32bit | 32bit ARCH=i386 | 32bit | 32bit ARCH=x86_64 | 64bit | 64bit The general rule are that ARCH= and native architecture takes precedence over the configuration. So make ARCH=i386 [whatever] will always build a 32-bit kernel no matter what the configuration says. The configuration will be updated to 32-bit if it was configured to 64-bit and the other way around. This behaviour is consistent with previous behaviour so no suprises here. make ARCH=x86 will per default result in a 32-bit kernel but as the only ARCH= value x86 allow the user to select between 32-bit and 64-bit using menuconfig. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Andreas Herrmann <aherrman@arcor.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-12x86: enable "make ARCH=x86"Sam Ravnborg
After unification of the Kconfig files and introducing K64BIT support in kconfig it required only trivial changes to enable "make ARCH=x86". With this patch you can build for x86_64 in several ways: 1) make ARCH=x86_64 2) make ARCH=x86 K64BIT=y 3) make ARCH=x86 menuconfig => select 64-bit Likewise for i386 with the addition that i386 is default is you say ARCH=x86. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-12kconfig: use $K64BIT to set 64BIT with all*config targetsSam Ravnborg
The variable K64BIT can now be used to select the value of CONFIG_64BIT. This is for example useful for powerpc to generate allmodconfig for both bit sizes - like this: make ARCH=powerpc K64BIT=y make ARCH=powerpc K64BIT=n To use this the Kconfig file must use "64BIT" as the config value to select between 32 and 64 bit. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2007-11-12kconfig: add helper to set config symbol from environment variableSam Ravnborg
Add conf_set_env_sym() that can set an already defined symbol based on the value of an environment variable. Unknown symbols are silently ignored. A warning is printed if the value of the environment variable is unexpected. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2007-11-12kconfig: factor out code in confdata.cSam Ravnborg
This patch introduce no functional changes. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2007-10-25x86: move i386 and x86_64 Kconfig files to x86 directorySam Ravnborg
After a small change in kconfig Makefile we could move all x86 Kconfig files to x86 directory. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-25kconfig: small code refactoring in kconfig MakefileSam Ravnborg
Do not hardcode the arch/$(ARCH)/Kconfig name all over Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-25x86: move defconfig files for i386 and x86_64 to x86Sam Ravnborg
With some small changes to kconfig makefile we can now locate the defconfig files for i386 and x86_64 in the configs/ subdirectory under x86. make ARCH=i386 defconfig and make defconfig works as expected also after this change. But arch maintainers shall now update a defconfig file in the configs/ directory. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-20kconfig: set title bar in xconfigRandy Dunlap
Put kernel version info on title bar in xconfig (qconf) instead of defaulting to "qconf". Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-19Revert "kconfig: tristate choices with mixed tristate and boolean values"Linus Torvalds
This reverts commit a5bf3d891a6a0fb5aa122792d965e3774108b923. David Brownell notes that this causes a regression visible in the drivers/usb/gadget Kconfig file: "That Kconfig hasn't changed (other than adding new drivers), and it's worked that way for several years now ... so the issue seems to be changes in menuconfig/kconfig/etc semantics. The issue is that when USB_GADGET=m, it's no longer possible to configure peripheral controller drivers as modules ... the controller drivers can now only be configured for static linkage. It should be making a choice of one of the controller drivers which could work on the target system, and allow that driver to be linked either as a module (ok iff USB_GADGET=m) or statically." Reverting this commit resolves the problem, and also fixes a second problem that David noticed: various dependent options couldn't be enabled. Tested-and-reported-by: David Brownell <david-b@pacbell.net> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Jan Beulich <jbeulich@novell.com>, Cc: Andrew Morton <akpm@linux-foundation.org>, Cc: Sam Ravnborg <sam@ravnborg.org>, Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18kconfig: comment typo in scripts/kconfig/Makefile.Rob Landley
Typo in comment in scripts/kconfig/Makefile. Signed-off-by: Rob Landley <rob@landley.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12kconfig/menuconfig: distinguish between selected-by-another options and commentsMatej Laitl
menuconfig currently represents options implied by another option ('select' directive in Kconfig) by prefixing them with '---'. Unfortunately the same notation is used for comments. If the implied option is module capable, user can still switch between Y and M, all without any feedback until she visits option's help. (try saying M to MAC80211 and then toggling CFG80211) This patch changes notation of selected-by-another items by introducing 2 new representations for implied options: {*} or {M} for options selected by another modularized one, thus builtin or module capable, -*- or -M- for options that cannot be at the moment changed by user. The idea is to represent actual capability of the option by braces (dashes) around and to always report actual state by * or M inside. Signed-off-by: Matej Laitl <strohel@gmail.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12kconfig: tristate choices with mixed tristate and boolean valuesJan Beulich
Change kconfig behavior so that mixing bool and tristate config settings in a choice is possible and has the desired effect of offering just the tristate options individually if the choice gets set to M, and a normal boolean selection if the choice gets set to Y. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12kbuild: update _shipped files for kconfig syntax cleanupSam Ravnborg
Update _shipped files so regular user does not need to have bison/flex/gperf installed. Code changes were contained in previous commit. Used following program versions (on fedora): bison (GNU Bison) 2.3 flex 2.5.33 GNU gperf 3.0.2 Cc: Adrian Bunk <bunk@kernel.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12kconfig: syntax cleanup - drop support for "depends/requires/def_boolean"Adrian Bunk
Remove the following redundant and never or rarely used kconfig syntax: - "def_boolean" (same as "def_bool") - "requires" (same as "depends on") - "depends" (same as "depends on") This patch contains the code changes and Kconfig updates. The shipped files are in next patch to let actual codechange stand out. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12kconfig: fix segv fault in menuconfigSam Ravnborg
With specific configurations requesting help for certain menu lines caused menuconfig to crash. This was tracked down to a null pointer bug. Thanks to "Miles Lane" <miles.lane@gmail.com> for inital reporting and to Gabriel C <nix.or.die@googlemail.com> for the backtrace that helped me locating the bug. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12kconfig: make comments stand out in menuconfigSam Ravnborg
Matěj Laitl <strohel@gmail.com> noticed that there was no way to distingush between comments and un-selectable menu lines. This patch marks comments with *** comment *** Cc: Matěj Laitl <strohel@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12kbuild: check if we can link gettext not just compileSam Ravnborg
cygwin provides the header file but the lib file needs to be added manually. A generic fix is to check if we can compile and link a program that uses gettext() and if it fails fall back to NO_NLS. International users of cygwin may have to specify HOST_LOADLIBES := "-lintl" on the make command line. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-09-01kconfig: oldconfig shall not set symbols if it does not need toRoman Zippel
Avoid setting the value if the symbol doesn't need to be changed or can't be changed. Later choices may change the dependencies and thus the possible input range. make oldconfig from a 2.6.22 .config with CONFIG_HOTPLUG_CPU not set was in some configurations setting CONFIG_HOTPLUG_CPU=y without asking, even when there was no actual requirement for CONFIG_HOTPLUG_CPU. This was triggered by SUSPEND_SMP that does a select HOTPLUG_CPU. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Tested-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-07-25kconfig: remove unused members from struct symbolSam Ravnborg
dep and dep2 in struct symbol was unused - remove them. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2007-07-25kconfig: attach help text to menusSam Ravnborg
Roman Zippel wrote: > A simple example would be > help texts, right now they are per symbol, but they should really be per > menu, so archs can provide different help texts for something. This patch does this and at the same time introduce a few API funtions used to access the help text. The relevant api functions are introduced in the various frontends. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2007-07-17kconfig: reset generated values only if Kconfig and .config agree.Roman Zippel
Normally generated values (Kconfig entries without a prompt) are cleared as they are regenerated anyway and so they appear as new should they become visible and defaults work as expected (once a value is set defaults aren't used anymore). The detection whether a value is generated or not is only based on its visibility status, which can quickly change for a lot of symbols by just removing a single line from .config or adding a dependency to Kconfig as you noticed. The patch now suppresses this logic when .config and Kconfig aren't in sync and .config needs to be updated, so that you can remove now a random value from .config and oldconfig won't reask for many other values. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-07-17kconfig: strip 'CONFIG_' automatically in kernel configuration searchBernhard Walle
Modify the ncurses configuration tool ('make menuconfig') in a way that the user can enter the search string (/) both with or without the leading 'CONFIG_'. This simplifies using copy & paste from .config files because you can select the whole word. Signed-off-by: Bernhard Walle <bwalle@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-07-16kconfig: fix update-po-configSam Ravnborg
Massimo Maiurana <maiurana@gmail.com> reported that update-po-config was broken: 1) spelling errors in Makefile so arch/um failed 2) UTF-8 was not supported The following patch address the above problems. kxgettext now append the output to the .pot file generated by xgettext - so we have a header. In all places UFT-8 is specifed so we now flawlessly support UTF-8. The Kconfig files had an empty string in a few cases - these are now supressed in kxgettext. With this the translators can now pick up where they left and get it all translated. There are ~11000 strings to be translated... Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Massimo Maiurana <maiurana@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2007-07-16kconfig: use POSIX equality test in check-lxdialog.shMike Frysinger
The "==" operator is not in POSIX, so use -eq instead. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-19kconfig: search harder for curses library in check-lxdialog.shMike Frysinger
The check-lxdialog.sh script searches for "libFOO.so" which fails on OS X, due to their special naming of libraries like "libfoo.dylib". This patch turns the curses lib search into extensible loops and adds dylib as a valid extension. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-06kconfig: fix mconf segmentation faultMarcin Garski
I have found small bug in mconf, when you run it without any argument it will sigsegv. Without patch: $ scripts/kconfig/mconf Segmentation fault With patch: $ scripts/kconfig/mconf can't find file (null) Signed-off-by: Marcin Garski <mgarski@post.pl> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-06kconfig: error out if recursive dependencies are foundSam Ravnborg
Sample: config FOO bool "This is foo" depends on BAR config BAR bool "This is bar" depends on FOO This will result in following error message: error: found recursive dependency: FOO -> BAR -> FOO And will then exit with exit code equal 1 so make will stop. Inspired by patch from: Adrian Bunk <bunk@stusta.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@stusta.de> Cc: Roman Zippel <zippel@linux-m68k.org>
2007-05-02kconfig: correct minor typo in Kconfig warning message.Robert P. J. Day
Correct a minor spelling mistake in a Kconfig warning message. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02kbuild: be more explicit on missing .config fileRandy Dunlap
Somewhat in reponse to kernel bugzilla #8197, be more explicit about why 'make all' fails when there is no .config file. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02kconfig: refer to qt3 if we cannot find qt librariesSam Ravnborg
We do not support qt4 (yet) so the simple fix was to warn that qt3 are missing. The better fix would have been to implment qt4 support but that has failed so far. This solves http://bugzilla.kernel.org/show_bug.cgi?id=8277 Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02kbuild: remove kconfig binaries during make mrproperSam Ravnborg
Nigel Cunningham <nigel@nigel.suspend2.net> noticed that 'make mrproper' did not remove mconf. Fixed so we now remove all relevant binaries. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Nigel Cunningham <nigel@nigel.suspend2.net>
2007-05-02kconfig/menuconfig: do not hardcode '.config'Sam Ravnborg
Export and use the function conf_get_configname() to retreive the default configuration filename. Suggested by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02menuconfig: remember alternate config filenameSam Ravnborg
When loading an alternate configuration use that file as current configuration filename. Make the filename visible in the dialog. Default continue to be .config. Inspired by patch from: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Cyrill Gorcunov <gorcunov@gmail.com>
2007-05-02kconfig/xconfig: sync main view with search dialog current menuMarco Costalba
When changing current menu in search dialog update also main view Signed-off-by: Marco Costalba <mcostalba@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02menuconfig: dont use obsolete index() function in lxdialogMike Frysinger
The index() function is obsolete, use strchr() instead. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-02-14[PATCH] qconf: hide empty list itemsCyrill V. Gorcunov
This patch fixes showing empty config list items if "Option/Show All Options" is turned on. For example empty items appears on list of 'Block Layer' menu. Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Oleg Verych <olecom@flower.upol.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] qconf: Back button behaviour normalizationCyrill V. Gorcunov
Do "Back" button behaviour normalization so it is enabled starting from second-level menu only. Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] qconf: fix showing help info on failed searchCyrill V. Gorcunov
qconf does not clear help text in search window if previous search has been failed. Signed-off-by: Cyrill V. Gorcunov <gorcunov@mail.ru> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] qconf: relocate Search CommandShlomi Fish
Relocate the qconf search command to the "Edit"->"Find" menu option. This is per the discussion on my qconf search dialog patch. Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] qconf: immediately update integer and string values in xconfig displayKarsten Wiese
In xconfig's display integer and string values are also shown as part of the config item's descriptive text. This patch updates the descriptive text, when the corresponding value has been changed. Fix for http://bugzilla.kernel.org/show_bug.cgi?id=7744 Take2 uses updateList() so config values dependending on the changed value see the change. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-11[PATCH] qconf: (re)fix SIGSEGV on empty menu itemsRoman Zippel
Back out the recent fix for this bug, fix it by correctly initialising ConfigInfoView.sym. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: "Cyrill V. Gorcunov" <gorcunov@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-01-05[PATCH] qconf: fix SIGSEGV on empty menu itemsCyrill V. Gorcunov
qconf may cause SIGSEGV by trying to show debug information on empty menu items Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] kconfig: set gconf's save-widget's sensitivity according to ↵Karsten Wiese
.config's changed state Clean up a little. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] kconfig: add "void conf_set_changed_callback(void (*fn)(void))", use ↵Karsten Wiese
it in qconf.cc Added function sets "void (*conf_changed_callback)(void)". Call it, if .config's changed state changes. Use above in qconf.cc to set gui's save-widget's sensitvity. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] kconfig: make sym_change_count static, let it be altered by 2 ↵Karsten Wiese
functions only Those two functions are void sym_set_change_count(int count) and void sym_add_change_count(int count) All write accesses to sym_change_count are replaced by calls to above functions. Variable and changer-functions are moved to confdata.c. IMO thats ok, as sym_change_count is an attribute of the .config's change state. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] kconfig: new function "bool conf_get_changed(void)"Karsten Wiese
Run "make xconfig" on a freshly untarred kernel-tree. Look at the floppy disk icon of the qt application, that has just started: Its in a normal, active state. Mouse click on it: .config is being saved. This patch series changes things so taht after the mouse click on the floppy disk icon, the icon is greyed out. If you mouse click on it now, nothing happens. If you change some CONFIG_*, the floppy disk icon returns to "active state", that is, if you mouse click it now, .config is written. This patch: Returns sym_change_count to reflect the .config's change state. All read only accesses of sym_change_count are replaced by calls to conf_get_changed() . mconfig.c is manipulated to ask for saving only when conf_get_changed() returned true. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] qconf: support old QTakpm@osdl.org
Might make qconf compilable with qt-3.1 as well as qt-3.3 Cc: greg chesson <xtp@google.com> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-25[PATCH] fix menuconfig colours with TERM=vt100Roman Zippel
On Mon, 13 Nov 2006, Phil Oester wrote: > In commit 350b5b76384e77bcc58217f00455fdbec5cac594, the default menuconfig > color scheme was changed to bluetitle. This breaks the highlighting > of the selected item for me with TERM=vt100. The only way I can see > which item is selected is via: > > make MENUCONFIG_COLOR=mono menuconfig > > Which restores the pre-2.6.19 white on black highlighting. Fix. Cc: Phil Oester <kernel@linuxace.com> Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>