summaryrefslogtreecommitdiffstats
path: root/sound/pci/hda
AgeCommit message (Collapse)Author
2011-08-18ALSA: hda - Add "PCM" volume to vmaster slave listTakashi Iwai
The new parser may use "PCM" volume, but it was missing the vmaster slave list, thus "Master" volume didn't control it. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=41342 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-16ALSA: hda - Fix duplicated capture-volume creation for ALC268 modelsTakashi Iwai
Fix the duplicated creation of capture-mixer elements for some static ALC268 configurations. The capture mixers must be put to cap_mixer field instead of mixers array. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-10ALSA: hda - Add CONFIG_SND_HDA_POWER_SAVE to stac_vrefout_set()Wang Shaoyan
In commit 45eebda7, it add new function stac_vrefout_set, but it is only used in code between CONFIG_SND_HDA_POWER_SAVE macro, so add the macro to avoid such warning: sound/pci/hda/patch_sigmatel.c:676:12: warning: 'stac_vrefout_set' defined but not used Signed-off-by: Wang Shaoyan <wangshaoyan.pt@taobao.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-05ALSA: hda - Fix a complile warning in patch_via.cWang Shaoyan
sound/pci/hda/patch_via.c:2087: warning: 'dac' may be used uninitialized in this function Signed-off-by: Wang Shaoyan <wangshaoyan.pt@taobao.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-04ALSA: hda - Use auto-parser for ASUS UX50, Eee PC P901, S101 and P1005Takashi Iwai
It works fine with auto-parser and now the digital mic workaround was implemented in auto-parser fixup, let's drop the static model quirks for these models. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-04ALSA: hda - Fix digital-mic mono recording on ASUS Eee PCTakashi Iwai
The digital-mic unit on ASUS Eee PC gives PDM signals instead of the normal stereo PCM, thus you can't record a mono stream from the stereo stream as is; the summed stereo signal results in almost zero level, and you'll hear only soft noise. As a workaround, use ALC269-specific COEF to manipulate the dmic route for mono, like used for ALC271x. This is implemented as a fix-up, thus it works only with model=auto or without REALTEK_QUIRKS Kconfig. Reported-and-tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-27ALSA: hda - Fix duplicated DAC assignments for RealtekTakashi Iwai
Copying hp_pins and speaker_pins from line_out_pins may confuse the parser, and it can lead to duplicated initializations for the same pin with a wrong DAC assignment. The problem appears in 3.0 kernel code. Cc: <stable@kernel.org> (for 3.0) Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-27ALSA: hda - Fix Oops with Realtek quirks with NULL adc_nidsTakashi Iwai
Somce quirk models don't set adc_nids but let the parser filling it. But the recent code has unnecessary NULL-checks of spec->input_mux, and it resulted in NULL dereferences. This patch fixes that regression. Reported-and-tested-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-27ALSA: hda - Add support for vref-out based mute LED control on IDT codecsVitaliy Kulikov
This patch also registers all necessary callbacks to support mute LED only when such control is enabled. And it keeps codec AFG in D0 or D1 state all the time when aggressive power managemnt is enabled for vref-out control (and mute LED) work correctly. Signed-off-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-26ALSA: hda - Cirrus Logic CS421x supportTim Howe
This update includes the changes necessary for supporting the CS421x family of codecs. Previously this file only supported the CS420x family of codecs. This file also contains init verbs to correct several issues in the CS421x hardware. Behavior between the CS421x and CS420x codec families is similar, so several functions have been reused with "if" statements to determine which codec family (CS421x or CS420x) is present. Also, this file will be updated sometime in the near future in order to add support for a system using CS421x that requires mono mix on the speaker output only. [Fix const usages and adaption for new APIs by tiwai] Signed-off-by: Tim Howe <tim.howe@cirrus.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-26ALSA: hda - Allow codec-specific set_power_state opsTakashi Iwai
The procedure for codec D-state change may have exceptional cases depending on the codec chip, such as a longer delay or suppressing D3. This patch adds a new codec ops, set_power_state() to override the system default function. For ease of porting, snd_hda_codec_set_power_to_all() helper function is extracted from the default set_power_state() function. As an example, the Conexant codec-specific delay is removed from the default routine but moved to patch_conexant.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-26ALSA: hda - Add post_suspend patch opsTakashi Iwai
Add a new ops, post_suspend(), which is called after suspend() ops is performed. This is called only in the case of the real PM suspend, and the codec driver can use this for further changing of D-state or clearing the LED, etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-26ALSA: hda - Make CONFIG_SND_HDA_POWER_SAVE depending on CONFIG_PMTakashi Iwai
It makes little sense to enable power-saving without PM. This removes SND_HDA_NEEDS_RESUME define so that we can use CONFIG_PM in all places. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-26ALSA: hda - Make sure mute led reflects master mute stateVitaliy Kulikov
This patch adds checking of mute state on all outputs besides just speakers to calculate the master mute state for mute led support. It also renames and splits the function that does it for better code clarity. Signed-off-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-26ALSA: hda - Fix invalid mute led state on resume of IDT codecsVitaliy Kulikov
Codec state is not restored immediately on resume but on the first access when power-save is enabled. That leads to an invalid mute led state after resume until either sound is played or some control is changed. This patch adds a possibility for a vendor specific patch to restore codec state immediately after resume if required. And it adds code to restore IDT codecs state immediately on resume on HP systems with mute led support. Signed-off-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-24ALSA: hda - Add support of the 4 internal speakers on certain HP laptopsVitaliy Kulikov
Signed-off-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-23ALSA: hda - Fix DAC filling for multi-connection pins in Realtek parserTakashi Iwai
Fix a regression in the DAC filling code in patch_realtek.c. The already filled DACs in multiout.dac_nids[] were ignored because of num_dacs=0, thus always pointed to the first DAC. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-22Merge branch 'topic/hda' into for-linusTakashi Iwai
2011-07-22Merge branch 'topic/misc' into for-linusTakashi Iwai
2011-07-21ALSA: hda - Remove a superfluous argument of via_auto_init_output()Takashi Iwai
"force" argument is always true, so let's strip it off. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-21ALSA: hda - Fix indep-HP path (de-)activation for VT1708* codecsTakashi Iwai
This patch fixes non-working indep-HP control on VT1708* codecs. The problems are that via_independent_hp_put() wasn't fixed to follow the recent change of three HP paths, and hp_indep_path didn't contain the amp nids of mixer elements. Together with the fixes, a few code clean-ups are done. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-18ALSA: hda - Switch HP DAC dynamically with indep-HP switch for VIATakashi Iwai
This patch changes the behavior of independent-HP enum switch. Now instead of returning a busy error, the driver switches dynamically the stream of the HP (and shared) DACs according to the current mode. The logic is similar like the dual-mic ADC switch, but a bit more complicated because of the presence of shared DAC. Together with the change, a mutex is introduced to protect against the possible races for the indep-HP mode setting. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-18ALSA: hda - Implement dynamic loopback control for VIA codecsTakashi Iwai
This patch adds the dynamic control of analog-loopback for VIA codecs. When the loopback is enabled, the inputs from line-ins and mics are mixed with the front DAC, and sent to the front outputs. The very same input is routed to the headhpones and speakers in loopback mode. However, since the loopback mix can't take other than the front DAC, there is no longer individual volume controls for headphones and speakers. Once when the loopback control is off, these volumes take effect. Since the individual volumes are more desired in general use caess, the loopback mode is set to off as default for now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-14ALSA: hda - Fix krealloc() replacement in hda_codec.cTakashi Iwai
It was obviously wrong, grr.... Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-14ALSA: hda - Re-add need_dac_fix check for multi-io jacks of Realtek codecsTakashi Iwai
During the rewrite, the check of spec->need_dac_fix and the corresponding num_dacs change was dropped from the channel-mode control. This patch re-adds it, and also enables need_dac_fix for ALC880 as default, as this feature was originally introduced to fix h/w bugs of this chip. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-12ALSA: hda - fix up typos in Kconfig help for default buffer size introduced ↵Paul Menzel
in acfa634f This commit is a fix up for commit acfa634f. commit acfa634f7e199193ec28282e82a5a6dd8edebcb7 Author: Takashi Iwai <tiwai@suse.de> Date: Tue Jul 12 17:27:46 2011 +0200 ALSA: hda - Add Kconfig for the default buffer size Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-12ALSA: hda - Add Kconfig for the default buffer sizeTakashi Iwai
Add a Kconfig entry to specify the default buffer size. Distros using PulseAudio can choose a larger value here. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-12ALSA: Use krealloc() in possible placesTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-12ALSA: hda - Expose secret DAC-AA connection of some VIA codecsTakashi Iwai
VT1718S and co have a secret connection from DAC to AA-mix, which doesn't appear in the connection list obtained from the h/w. Currently the driver fixes the connection index locally at init, but now we can expose it statically via snd_hda_override_connections() so that this conection can be checked better by the parser in future. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-12ALSA: hda - Always read raw connections for proc outputTakashi Iwai
In the codec proc outputs, read the raw connections instead of the cached connection list, i.e. proc files contain only raw values. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-12ALSA: hda - Add snd_hda_override_conn_list() helper functionTakashi Iwai
Add a function to add/modify the connection-list cache entry. It'll be useful to fix a buggy hardware result. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-11ALSA: hda - Turn on extra EAPDs on Conexant codecsTakashi Iwai
Some machines seem to use EAPD control of the unused pin for controlling the overall EAPD. Since the driver currently doesn't check the EAPD of unused pins, the EAPD isn't enabled. For avoiding such a problem, turn all extra EAPDs on as default. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-11ALSA: hda - Preserve input pin-ctl bits in HP-automute for VIA codecTakashi Iwai
For smart51 pins, we need to preserve the input pin-control bits at auto-mute controls instead of overwriting zero or pin-out-only. Otherwise the VREF won't be set properly when smart51 is disabled again. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-11ALSA: hda - Set line-out pin-ctls properly when indep-HP mode changesTakashi Iwai
When Independent-HP mode is changed for VIA, the driver needs to re-issue the auto-mute check so that the line-out pins are set properly without influence of HP pin state. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-11ALSA: hda - Via Fix speaker-mute checks in VIA driverTakashi Iwai
When the line-jack is plugged/unplugged, the driver must check also the headphone jack state in addition to the line-out jack. Currently it checks only the line-out state and ignores the headphone. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-09ALSA: hda - Implement 44kHz workaround for IdeadPad as fixupTakashi Iwai
Instead of checking the model quirk, use a fixup table for workaround of 44kHz-fixed PCM for Lenovo IdeaPad with ALC269. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-09ALSA: hda - Fix a copmile warningTakashi Iwai
It's harmless but annyoing. sound/pci/hda/patch_realtek.c: In function ‘alc_cap_getput_caller’: sound/pci/hda/patch_realtek.c:2722:9: warning: ‘err’ may be used uninitialized in this function Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.cTakashi Iwai
Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08ALSA: hda - Merge ALC260 auto-parser codeTakashi Iwai
Finally the last one. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08ALSA: hda - Merge ALC269 parser codeTakashi Iwai
One more code reduction. This codec has less DACs, thus the wiring to DAC can't be filled uniquely for all output pins, i.e. some outputs share the same volume control. Except for that, all seems working fine. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08ALSA: hda - Merge ALC268/269 auto-parser codesTakashi Iwai
Now coming to ALC268/269 parser codes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08ALSA: hda - Merge ALC861 auto-parser codeTakashi Iwai
Merge more auto-parser code in patch_realtek.c, now for ALC861. The topology of this codec is pretty simple, and can be parsed well by the current starndard parser. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08ALSA: hda - Fix amp-cap checks in patch_realtek.cTakashi Iwai
query_amp_caps() may return non-zero if the amp cap isn't supported by the codec. Thus one needs to check widget-caps first, then check the corresponding amp-caps. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08ALSA: hda - Merge ALC861-VD auto-parse to the standard parserTakashi Iwai
The existing standard auto-parser can work well with this codec, too. Let's merge. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08ALSA: hda - Fix auto-mic detection in Realtek codec-parserTakashi Iwai
A regression fix from commit 21268961d3d1bbdd22a19b68adb80119e8c72dcd ALSA: hda - More flexible dynamic-ADC switching for Realtek codecs The auto-mic wasn't detected properly when no ADC-switch is needed. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08ALSA: hda - Fix output-path of VT1812 codecLydia Wang
For VT1812, add dac_mixer_idx for initialization. Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08ALSA: hda - Fix Oops in smart51 parsing in VIA codecTakashi Iwai
Typical off-by-one thinko. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08ALSA: hda - Provide the standard auto_init for Realtek codecsTakashi Iwai
Remove redundant definitions. Ideally, all init functions should be identical in future. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08ALSA: hda - Merge ALC680 auto-parser to the standard parserTakashi Iwai
Improved the standard Realtek auto-parser to support the codec topology like ALC680. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08ALSA: hda - Add a fix-up for HP RP5800Takashi Iwai
The BIOS provides bogus pin configs, and also invalid SSID. Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-01-23 16:00:14 +0000