summaryrefslogtreecommitdiffstats
path: root/sound/pci/rme9652
AgeCommit message (Collapse)Author
2009-08-12ALSA: hdsp - allow proc reporting with disconnected io boxTim Blechmann
the hdsp driver refuses to report any information via the proc interface, if the io box is not connected. with this patch, the content of the control and status registers is printed before the iobox check. Signed-off-by: Tim Blechmann <tim@klingt.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-10Merge branch 'topic/hdsp' into for-linusTakashi Iwai
* topic/hdsp: ALSA: hdsp - Add a comment about external firmwares for hdsp ALSA: hdsp: allow firmware loading from inside the kernel
2009-06-05ALSA: Clean up 64bit division functionsTakashi Iwai
Replace the house-made div64_32() with the standard div_u64*() functions. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-12ALSA: hdsp: allow firmware loading from inside the kernelRaphael Doursenaud
Allow the use of the FIRMWARE_IN_KERNEL option with hdsp cards and in-kernel driver. Also corrected a typo in the comment. Signed-off-by: Raphael Doursenaud <rdoursenaud@free.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-05ALSA: hdsp - Ignore MIDI and PCM events in interrupts until initializedTakashi Iwai
Ignore MIDI and PCM events in the interrupt handler until the device gets initialized properly. Otherwise you may get kernel panic by the access to uninitialized devices via hotplugging. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-23ALSA: hdsp - whitespace cleanupTim Blechmann
Impact: remove trailing spaces Signed-off-by: Tim Blechmann <tim@klingt.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-23ALSA: hdsp - poll for ioboxTim Blechmann
sleeping for 2 seconds before checking for the iobox is not enough on some systems. this patch increases the timeout, but polls the card during that time. it thus speeds up the module loading when the card has already been initialized, while being more robust on systems, which require a higher timeout than the predefined 2 seconds. Signed-off-by: Tim Blechmann <tim@klingt.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-23Merge branch 'topic/hwdep-cleanup' into topic/hdspTakashi Iwai
2009-02-05ALSA: Remove superfluous hwdep opsTakashi Iwai
Remove NOP hwdep ops in sound drivers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-12ALSA: Convert to snd_card_create() in sound/pci/*Takashi Iwai
Convert from snd_card_new() to the new snd_card_create() function in sound/pci/*. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-25Merge branch 'topic/udev-id-rename' into to-pushTakashi Iwai
2008-12-18ALSA: hda - Convert from takslet_hi_schedule() to tasklet_schedule()Takashi Iwai
Replace all tasklet_hi_schedule() callers with the normal tasklet_schedule(). The former often causes troubles with RT-kernels, and has actually no merit. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-12ALSA: hdsp/hdspm: remove card->id from rawmidi device nameJaroslav Kysela
The card->id (card text identification) can be changed at runtime. It might be confusing to have old text identification in device name. Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-09ALSA: hdsp: check for iobox and upload firmware during ioctlTim Blechmann
currently, the error message when trying to run hdspmixer or hdspconf if the breakout box is not connected is somehow misleading, since it asks the user to upload the firmware. this patch adds a test, whether the breakout box is connected and tries to upload the firmware in the case, that it is not present, e.g. because of power failures of the breakout box. [Minor coding-style fixes by tiwai] Signed-off-by: Tim Blechmann <tim@klingt.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-09ALSA: HDSP: check for io box before uploading firmwareTim Blechmann
currently the hdsp driver tries to upload the firmware, even if the io box is not connected. this patch adds a check for the io box before trying to upload the firmware. thus instead of messages complaining about the fifo status and firmware loading failure, the driver gives a message that no multiface or digiface is connected. [A minor coding-style fix by tiwai] Signed-off-by: Tim Blechmann <tim@klingt.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-08-25ALSA: Clean up SG-buffer helper functions and macrosTakashi Iwai
Clean up SG-buffer helper functions and macros. Helpers take substream as arguments now. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13ALSA: Kill snd_assert() in sound/pci/*Takashi Iwai
Kill snd_assert() in sound/pci/*, either removed or replaced with if () with snd_BUG_ON(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-04-24[ALSA] sound/pci/rme9652/hdspm.c: stop inlining largish static functionsDenys Vlasenko
sound/pci/rme9652/hdspm.c has unusually large number of static inline functions - 22. I looked through them and some of them seem to be too big to warrant inlining. This patch removes "inline" from these static functions (regardless of number of callsites - gcc nowadays auto-inlines statics with one callsite). Size difference on 32bit x86: text data bss dec hex filename 20437 2160 516 23113 5a49 linux-2.6-ALLYES/sound/pci/rme9652/hdspm.o 18036 2160 516 20712 50e8 linux-2.6.inline-ALLYES/sound/pci/rme9652/hdspm.o [coding fix by Takashi Iwai <tiwai@suse.de>] Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] sound: hdspm.c fix returning void expression warningsHarvey Harrison
Just drop the returns. sound/pci/rme9652/hdspm.c:1031:3: warning: returning void-valued expression sound/pci/rme9652/hdspm.c:1033:3: warning: returning void-valued expression Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hdsp - RME 9632 fix at 192kHzRemy Bruno
The bits indicating SPDIF frequency in the status register are not the same for the 9632 than for the other cards, because it also supports 192kHz. A specific bitmask has thus been added (used in hdsp_spdif_sample_rate()). The 9632 does not seem to report external sample rates greater than 96kHz. In this case, the best seems to report spdif rate when autosync reference is spdif. This also required to move function hdsp_spdif_sample_rate(). Signed-off-by: Remy Bruno <remy.bruno@trinnov.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-02-22[ALSA] hdsp - Fix section mismatchTakashi Iwai
Removed invalid __devinit from hdsp_request_fw_loader() and snd_hwdep_create_hwdep() that aren't always init functions. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-31[ALSA] hdsp: make Multiface II work againAndreas Degert
This device has io_type == 1 (Multiface) and firmware_rev > 0xa (fixes regression from changeset 5326) Signed-off-by: Andreas Degert <ad@papyrus-gmbh.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] sound: fix rme9652 section mismatchRandy Dunlap
Fix section mismatch in hdsp: snd_hdsp_proc_init() can be called from an ioctl at any time. WARNING: vmlinux.o(.text+0x1089bc2): Section mismatch: reference to .init.text: (between 'snd_hdsp_create_alsa_devices' and 'snd_hdsp_free') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] Remove sound/driver.hTakashi Iwai
This header file exists only for some hacks to adapt alsa-driver tree. It's useless for building in the kernel. Let's move a few lines in it to sound/core.h and remove it. With this patch, sound/driver.h isn't removed but has just a single compile warning to include it. This should be really killed in future. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] sound/: Spelling fixesJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] pci - check value range in ctl callbacksTakashi Iwai
Check the value ranges in ctl put callbacks properly in the rest of PCI drivers. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] sound/pci: remove duplicated definesNicolas Kaiser
Remove duplicated defines. (From their use it looks like 'midiDataOutx are written to rather than read from.) Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16[ALSA] hdsp - Fix zero divisionTakashi Iwai
Fix zero-division bug in the calculation dds offset. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16[ALSA] Changed Jaroslav Kysela's e-mail from perex@suse.cz to perex@perex.czJaroslav Kysela
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16[ALSA] hdsp - Add support for latset RME9632 revisionsRemy Bruno
added support for the latest revision of the 9632 (and hopefully a few following ones). The DSP matrix was not working because of wrong identification of the card in this part of the code. Signed-off-by: Remy Bruno <remy.bruno@trinnov.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hdspm - Fix autosync bugRemy Bruno
* better report of speed mode change failures * autosync_ref control bugfix (was reporting pref_sync_ref instead) (changed HDSPM_AES32_AUTOSYNC_FROM_NONE value to comply with array indexing in snd_hdspm_info_autosync_ref()) * added support for master modes up to 192kHz (clock source control value was restricted up to 96kHz) Signed-off-by: Remy Bruno <remy.bruno@trinnov.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hdspm - Coding style fixesTakashi Iwai
Fix codes to follow more to the standard kernel coding style. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] Clean up with common snd_ctl_boolean_*_info callbacksTakashi Iwai
Clean up codes using the new common snd_ctl_boolean_*_info() callbacks. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-07-20[ALSA] rme9652 - Fix the hw_pointer checkTakashi Iwai
The negative check in hw_pointer callback doesn't work because the value is unsigned. Cast to int in the comparison to fix this. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11[ALSA] add MODULE_FIRMWARE entriesClemens Ladisch
Add MODULE_FIRMWARE() entries, where appropriate. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11[ALSA] hdsp - Add support for fine tuning of sample rate support to HDSP 9632Julian Cable
Add 'DDS Sample Rate Offset' control. Allows values in Hz from -5000 to +5000. The value is added to the nominal sample rate and written to the DDS register. Signed-off-by: Julian Cable <julian_cable@yahoo.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11[ALSA] hdspm - Support for Master mode of AES32 and recent MADIRemy Bruno
The current MADI driver was found not to completely work, at least on recent MADI cards (rev 204), in particular at 96kHz. This patch solves this: * Add support of DDS feature * Channel map fixed * Channel/rate rules fixed * DMA allocation fixed (need to alloc for all channels and not only for the used ones) Full support for AES32 master mode was added: * Add support of DDS feature * Channel map fixed * Channel/rate rules fixed Signed-off-by: Remy Bruno <remy.bruno@trinnov.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11[ALSA] Add snd_pcm_group_for_each_entry() for code cleanupTakashi Iwai
Added a new macro snd_pcm_group_for_each_entry() just for code cleanup. Old macros, snd_pcm_group_for_each() and snd_pcm_group_substream_entry(), are removed. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-03-06[ALSA] Add missing sysfs device assignment for ALSA PCI driversTakashi Iwai
Added the missing sysfs device assignment for ALSA PCI drivers. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09[ALSA] hdspm - Fix printk warningsTakashi Iwai
sound/pci/rme9652/hdspm.c: In function 'snd_hdspm_hw_params': sound/pci/rme9652/hdspm.c:3681: warning: format '%08X' expects type 'unsigned int', but argument 4 has type 'unsigned char *' sound/pci/rme9652/hdspm.c:3692: warning: format '%08X' expects type 'unsigned int', but argument 4 has type 'unsigned char *' Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09[ALSA] hdsp - Add DDS register support for RME9632 rev >= 152Remy Bruno
Add DDS register support for RME9632 rev >= 152. This register sets the sample rate for these cards and is required in addition to the standard control register. It corresponds to a quartz divisor. Signed-off-by: Remy Bruno <remy.bruno@trinnov.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09[ALSA] hdspm: Add support for AES32Remy Bruno
Add support for AES32. Difference between MADI and AES32 is done through revision. Master support is not finished for now (RME so-called DDS feature is not supported yet) Signed-off-by: Remy Bruno <remy.bruno@trinnov.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09[ALSA] hdsp: support for mixer matrix of RME9632 rev 152Remy Bruno
Added the support for mixer matrix of RME9632 rev 152. Signed-off-by: Remy Bruno <remy.bruno@trinnov.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-12-20[ALSA] Remove IRQF_DISABLED for shared PCI irqsTakashi Iwai
Fix IRQ flags for PCI devices. The shared IRQs for PCI devices shouldn't be allocated with IRQF_DISABLED. Also, when MSI is enabled, IRQF_SHARED shouldn't be used. The patch removes unnecessary cast in request_irq and free_irq, too. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-12-20[ALSA] hdsp: precise_ptr control switched off by defaultRemy Bruno
precise_ptr option causes dysfunction with hdsp driver. Turn it off as default. Signed-off-by: Remy Bruno <remy.bruno@trinnov.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-12-20[ALSA] use the ALIGN macroClemens Ladisch
Use the ALIGN macro instead of manual calculations. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-09-23[ALSA] hdsp - Fix auto-updating of firmwareTakashi Iwai
Fixed the auto-updating of firmware if the breakout box was switched off/on. The firmware binary itself was already cached but it wasn't loaded properly. Also, request_firmware() is issued if the box was with firmware at module loading time but later it's erased. The auto-update is triggered at each PCM action (open, prepare, etc) and at opening proc files. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-07-12[ALSA] Fix section mismatch errors in ALSA PCI driversTakashi Iwai
Fixed 'section mismatch' errors in ALSA PCI drivers: - removed invalid __devinitdata from pci id tables - fix/remove __devinit of functions called in suspend/resume Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-07-02[PATCH] irq-flags: sound: Use the new IRQF_ constantsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-05 10:52:46 +0000