summaryrefslogtreecommitdiffstats
path: root/sound/pci
AgeCommit message (Collapse)Author
2009-10-11ALSA: HDA VIA: Modify vt1708_set_pinconfig_connect function.Lydia Wang
like seqassoc 0xff, seqassoc 0xf0 of vt1708 should override Port Connectivity field into 'AC_JACK_PORT_COMPLEX' Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Signed-off-by: Logan Li <loganli@viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-11ALSA: HDA VIA: Add Jack detect feature for VT1708.Lydia Wang
VT1708 does not support unsolicited response, but we need hp detect to automute speaker. Implemented in workqueue. Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Signed-off-by: Logan Li <loganli@viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-11ALSA: HDA VIA: Refresh front playback mute in via_hp_automute.Lydia Wang
Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Signed-off-by: Logan Li <loganli@viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-11ALSA: HDA VIA: Add VIA_JACK_EVENT process in via_unsol_event.Lydia Wang
Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Signed-off-by: Logan Li <loganli@viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-11ALSA: HDA VIA: When changing input source, update power state.Lydia Wang
Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Signed-off-by: Logan Li <loganli@viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-11ALSA: HDA VIA: Add smart5.1 function.Lydia Wang
Smart 5.1 is for 3-jacks model, to reuse input pins as outputs. While off, they act as "line out" / "line in" / "mic in". While on, they acts as "line out" / "back left/right" / "center/lfe". Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Signed-off-by: Logan Li <loganli@viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-11ALSA: HDA VIA: Rewrite via_independent_hp_putLydia Wang
Use hp_independent_mode_index to store hp index, and simplify function via_independent_hp_put with it. Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Signed-off-by: Logan Li <loganli@viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-11ALSA: HDA VIA: Change VT1708S & VT1702 hp mode controlsLydia Wang
For VT1708S and VT1702, deactivate "Headphone Playback Volume" and "Headphone Playback Mute" control if "Independent HP" mode is OFF. and rename VT1702 "Independent HP" text. Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Signed-off-by: Logan Li <loganli@viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-11ALSA: HDA VIA: Remove unused argument of via_new_analog_inputLydia Wang
Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Signed-off-by: Logan Li <loganli@viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-11ALSA: HDA VIA: Add low current mode for power saving.Lydia Wang
For VT1708B, VT1708S and VT1702, enter low current mode if no analog stream is opened and all aa path mute. Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Signed-off-by: Logan Li <loganli@viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-11ALSA HDA VIA: Add VIA_CTL_WIDGET_ANALOG_MUTE control typeLydia Wang
Enter low power state if AA-Path volume is muted. Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Signed-off-by: Logan Li <loganli@viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-11ALSA: HDA VIA: Limit VT1702 AA-Path max volumeLydia Wang
according to customer request, VT1702 AA-Path max volume (12 dB) is too high, so limit to 0 dB. Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Signed-off-by: Logan Li <loganli@viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-11ALSA: HDA VIA: Add VT1708B-CE codec support.Lydia Wang
Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Signed-off-by: Logan Li <loganli@viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-11ALSA: HDA VIA: Change get_codec_type argument to hda_codec typeLydia Wang
Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Signed-off-by: Logan Li <loganli@viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-11ALSA: HDA VIA: Remove unused IS_VT17xx_VENDORID macroLydia Wang
IS_VT17*_VENDORID macros are used nowhere, so clean them up. Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Signed-off-by: Logan Li <loganli@viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-11Merge branch 'fix/hda' into topic/hdaTakashi Iwai
2009-10-10ALSA: ice1724: Fix surround on Chaintech AV-710Robert Hancock
Fix the num_total_dacs setting for Chaintech AV710. The existing comment that only PSDOUT0 is connected is correct, but since the card is using packed AC97 mode to send 6 channels to the codec, num_total_dacs should be set to 6 and not 2. This allows 6-channel surround to work. Also clarify a comment regarding the additional WM8728 codec on this card (it's connected to the SPDIF output and always receives the same data). Signed-off-by: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-09ALSA: hda - Add full rates/formats support for Nvidia HDMITakashi Iwai
Allow Nvidia HDMI to support more possible sample rates and formats. At best, the really supported rates and formats should be determined together with the negotiation with the HDMI receiver, but it's currently not implemented yet (Nvidia stuff seems incompatible with HDMI 1.3 standard in this regard). As a compromise, we enable all bits, assuming that all recent devices do support such rates/formats. Tested-by: Alan Alan <alanwww1@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-08Merge branch 'fix/misc' into for-linusTakashi Iwai
2009-10-08Merge branch 'fix/hda' into for-linusTakashi Iwai
2009-10-08ALSA: ice1724: increase SPDIF and independent stereo buffer sizesRobert Hancock
Increase the default and maximum PCM buffer prellocation size for ice1724's SPDIF and independent stereo pair outputs to 256K, which is the hardware's maximum supported size. This allows a reduction in interrupt rate and potentially power usage when an application is not latency-critical. Signed-off-by: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-08ALSA: ICE1712/24 - Change the Multi Track Peak control (level meters) from ↵Pavel Hofman
MIXER to PCM type * PLEASE NOTE - this change requires the corresponding update of envy24control for ice1712 - kind of an ABI change. * The "Multi Track Peak" control is read-only level meters indicator. * The control is VERY confusing to most users since it is currently displayed in regular mixers. E.g. alsamixer ignores its read-only status and allows changing the levels with keys which makes no sense. Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Acked-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-07ALSA: hda - Fix yet another auto-mic bug in ALC268Takashi Iwai
Since patch_alc268() doesn't call set_capture_mixer() (due to its h/w design different from other siblings), it needs to call fixup_automic_adc() explicitly to set up the auto-mic routing. Otherwise the indices for int/ext mics aren't set properly. Reference: Novell bnc#544899 http://bugzilla.novell.com/show_bug.cgi?id=544899 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-06sound: via82xx: move DXS volume controls to PCM interfaceClemens Ladisch
The "VIA DXS" controls are actually volume controls that apply to the four PCM substreams, so we better indicate this connection by moving the controls to the PCM interface. Commit b452e08e73c0e3dbb0be82130217be4b7084299e in 2.6.30 broke the restoring of these volumes by "alsactl restore" that most distributions use; the renaming in this patch cures that regression by preventing alsactl from applying the old, wrong volume levels to the new controls. http://bugzilla.kernel.org/show_bug.cgi?id=14151 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=532613 Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-06ALSA: hda - Don't pick up invalid HP pins in alc_subsystem_id()Takashi Iwai
alc_subsystem_id() tries to pick up a headphone pin if not configured, but this caused side-effects as the problem in commit 15870f05e90a365f8022da416e713be0c5024e2f. This patch fixes the driver behavior to pick up invalid HP pins; at least, the pins that are listed as the primary outputs aren't taken any more. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-06ALSA: hda - Add a workaround for ASUS A7KTakashi Iwai
ASUS A7K needs additional GPIO1 bit setup; it has to be cleared. Added a new fixup hook for this laptop so that it works as is. Refernece: Novell bnc#494309 http://bugzilla.novell.com/show_bug.cgi?id=494309 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-05ALSA: hda - Fix invalid initializations for ALC861 auto modeTakashi Iwai
The recent auto-parser doesn't work for machines with a single output with ALC861, such as Toshiba laptops, because alc_subsystem_id() sets the hp_pins[0] while it's listed in line_outs[0]. This ends up with the doubled initialization of the same mixer widget, and it mutes the DAC route because hp_pins has no DAC assigned. To fix this problem, just check spec->autocfg.hp_outs and speaker_outs so that they are really detected pins. Reference: Novell bnc#544161 http://bugzilla.novell.com/show_bug.cgi?id=544161 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-03Merge branch 'fix/hda' into for-linusTakashi Iwai
2009-10-02ALSA: hda - Clean up name string creation in patch_realtek.cTakashi Iwai
Use a common helper to create playback controls. This gives less chance of typos. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-02Merge branch 'fix/hda' into topic/hdaTakashi Iwai
2009-10-02ALSA: hda - Fix / improve ALC66x parserTakashi Iwai
The auto-parser for ALC662/663/272 codecs doesn't work properly when a speaker is connected to mono NID 0x17, and doesn't handle the dynamic DAC assignment properly. This patch fixes the issues and also improves the assignment of DACs so that HP and speakers can have independent volume controls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-02ALSA: ctxfi: Swapped SURROUND-SIDE muteSven Eckelmann
On Soundblaster X-FI Titenium with emu20k2 the SIDE and SURROUND mute functions are swapped. It was checked with 'speaker-test -c 8 -s 3' and (un)mute surround or 'speaker-test -c 8 -s 7' and (un)mute side. The volume seems not to be affected and works as expected. Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-02ALSA: intel8x0 - Mute External Amplifier by default for Sony VAIO VGN-B1VPDaniel T Chen
BugLink: https://bugs.launchpad.net/bugs/410933 This Sony VAIO model also needs External Amplifier unmuted for audible playback, so make sure we set the inv_eapd quirk. Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-01ALSA: hda - Fix digita/analog mic auto-switching with IDT codecsTakashi Iwai
When the auto-mic switching between an analog and a digital mic is needed with IDT codecs, the current driver doesn't reset the connection of the digital mux. This patch fixes the behavior by checking both mux connections properly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-01ALSA: hda - Added quirk to enable sound on Toshiba NB200Manoj Iyer
Patch was tested on Toshiba NB200 and is found to enable sound. Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com> Cc: stable@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-01ALSA: intel8x0 - Mute External Amplifier by default for Sony VAIO VGN-T350PDaniel T Chen
BugLink: https://bugs.launchpad.net/bugs/410933 This Sony VAIO model needs External Amplifier unmuted for audible playback, so make sure we set the inv_eapd quirk. Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-30ALSA: echoaudio - Re-enable the line-out control for the Mia cardGiuliano Pochini
Mia has an undocumented line-out control, and it has to be exposed. Signed-off-by: Giuliano Pochini <pochini@shiny.it> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-30ALSA: hda - Resurrect input-source mixer of ALC268 model=acerTakashi Iwai
In the commit fdbc66266c21976027938642f60e0f047149a61a, I mistakenly replaced the capture mixer array for ALC268_ACER to nosrc version although this should be kept to alt_mixer. Now fixed back. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-29ALSA: hda - Analog Devices AD1984A add HP Touchsmart modelMiguel de Barros
Reference: ALSA bug #0004614 https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4614 port-A (0x11) - front hp-out port-D (0x12) - rear line out port-E (0x1c) - front mic-in port-F (0x16) - Internal speakers digital-mic (0x17) - Internal mic init verbs, mixers, jack sensing and PCI_QUIRK to support this hardware Signed-off-by: Miguel de Barros <miguel.de.barros@bluewin.ch> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-28ALSA: hda - Enable MSI as defaultTakashi Iwai
Since the recent kernel can handle MSI properly on non-Intel platforms, let's enable MSI as default. If any borken device is found, we can add the quirk entry to the list, which is currently empty. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-28Merge branch 'fix/hda' into topic/hdaTakashi Iwai
2009-09-28sound: oxygen: fix input monitor control namesClemens Ladisch
Insert "Playback" into the input monitor control names to prevent alsa-lib from treating these controls as global controls. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-28sound: oxygen: add high-pass filter controlClemens Ladisch
Add a control that allows disabling the high-pass filter of the WM8785 ADC. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-28sound: oxygen: add digital filter controlClemens Ladisch
Add a control to select between sharp and slow roll-of filter responses of the DACs. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-28sound: virtuoso: add PCM1796 oversampling controlClemens Ladisch
Add a control to increase the oversampling factor to 128x on cards with PCM1796 or PCM1792A DACs. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-28sound: oxygen: allow custom MCLK ratesClemens Ladisch
Add a callback that allows model drivers to modify the default I2S MCLK rate. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-28sound: virtuoso: add headphone impedance controlClemens Ladisch
Add a mixer control to adjust the headphone amplifier output for headphones with different impedances. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-28sound: oxygen: cache codec registersClemens Ladisch
Keep a cache of codec registers to avoid unnecessary writes. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-28sound: oxygen: more hardware documentationClemens Ladisch
Add some comments describing the hardware pin routing. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-28sound: oxygen: add stereo upmixing to center/LFE channelsClemens Ladisch
Add the possibility to route a mix of the two channels of stereo data to the center and LFE outputs. This is implemented only for models where the DACs support this, i.e., for the Xonar D1 and DX. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-16 12:55:59 +0000