summaryrefslogtreecommitdiffstats
path: root/sound/pci
AgeCommit message (Collapse)Author
2009-07-20ALSA: ctxfi: Swapped SURROUND-SIDE channels on emu20k2Frank Roth
On Soundblaster X-FI Titanium with emu20k2 the SIDE and SURROUND channels were swapped and wrong. I double checked it with connector colors and creative soundblaster windows drivers. So I swapped them to the true order. Now "speaker-test -c6" and "speaker-test -c8" are working fine. Signed-off-by: Frank Roth <frashman@freenet.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-20ALSA: ca0106 - Fix the max capture buffer sizeTakashi Iwai
The capture buffer size with 64kB seems broken with CA0106. At least, either the update timing or the DMA position is wrong, and this screws up pulseaudio badly. This patch restricts the max buffer size less than that to make life a bit easier. Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
2009-07-20ALSA: hda - Fix pin-setup for Sony VAIO with STAC9872 codecsTakashi Iwai
The recent rewrite of the codec parser for STAC9872 caused a regression for some Sony VAIO models that don't give proper pin default configs by BIOS. Even using model=vaio doesn't work because the pin definitions are set after the pin overrides. This patch fixes the pin definitions in patch_stac9872() to be put in the right place before the pin overrides. Also the patch adds the new quirk entry for VAIO F/S to have the correct pin default configs. Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
2009-07-20ALSA: ctxfi - Native timer support for emu20k2Takashi Iwai
Added the native timer support for emu20k2, which gives much more accurate update timing than the system timer. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-20ALSA: hda - Add quirk for Gateway T6834c laptopHao Song
Gateway T6834c laptops need EAPD always on while the default behavior for the STAC9205 reference board is to turn it off upon every HP plug. By using the special "eapd" model, which is first introduced for Gateway T1616 laptops for this same reason, this peculiarity can be properly handled. Signed-off-by: Hao Song <baritono.tux@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-19Merge branch 'fix/hda' into topic/hdaTakashi Iwai
2009-07-19ALSA: hda_codec: Check for invalid zero connectionsJaroslav Kysela
To prevent "Too many connections" message and the error path for some HDMI codecs (which makes onboard audio unusable), check for invalid zero connections for CONNECT_LIST verb. Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-17ALSA: hda - Fix ALC268 parser for mono speakerTakashi Iwai
- Parse the mono output pin 0x16 correctly even as the primary output - Create "Speaker" volume control if the primary output is a speaker - Fix the wrong direction of (optional) "Mono" switch Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-17ALSA: hda - Fix the previous sanity check in make_codec_cmd()Takashi Iwai
The newly added sanity-check for a codec verb can be better written with logical ORs. Also, the parameter can be more than 8bit. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-17ALSA: hda - add bounds checking for the codec command fieldsWu Fengguang
A recent bug involves passing auto detected >0x7f NID to codec command, creating an invalid codec addr field, and finally lead to cmd timeout and fall back into single command mode. Jaroslav fixed that bug in alc880_parse_auto_config(). It would be safer to further check the bounds of all cmd fields. Cc: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-17ALSA: hda - Add support for new AMD HD audio devicesAndiry Brienza
Add support for new AMD HD audio devices. Use generic driver to detect HD audio devices with Vendor ID AMD. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-16Merge branch 'fix/misc' into for-linusTakashi Iwai
* fix/misc: ALSA: riptide - proper handling of pci_register_driver for joystick
2009-07-16Merge branch 'fix/hda' into for-linusTakashi Iwai
* fix/hda: ALSA: hda_intel: more strict alc880_parse_auto_config dig_nid checking
2009-07-16ALSA: hda - Add CX20582 and OLPC XO-1.5 supportDaniel Drake
This adds support for the Conexant CX20582 codec, based on code from http://www.linuxant.com/alsa-driver/alsa-driver-linuxant-1.0.19ppch12-1.noarch.rpm.zip This is the codec to be shipped in the OLPC XO-1.5, so this patch also includes an XO-specific profile. Resultant configuration: http://dev.laptop.org/~dsd/20090713/codec0.txt http://dev.laptop.org/~dsd/20090713/codec0.svg As the Linuxant code is structured differently to the other codecs, I was unable to cleanly reimplement everything in the generic and Dell profiles as more info is needed (e.g. codec graphs). I simplified those profiles so that hopefully it will not break anyone's audio. If it does, it may be worth returning -ENODEV from patch_cx5066 on non-OLPC systems, and then fixing snd_hda_codec_configure() to fall back on the generic parser, at least until support for other systems is figured out. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-15ALSA: riptide - proper handling of pci_register_driver for joystickJaswinder Singh Rajput
We need to check returning error for pci_register_driver(&joystick_driver) On failure, we should unregister formerly registered audio drivers This also fixed the compiler warning : CC [M] sound/pci/riptide/riptide.o sound/pci/riptide/riptide.c: In function ‘alsa_card_riptide_init’: sound/pci/riptide/riptide.c:2200: warning: ignoring return value of ‘__pci_register_driver’, declared with attribute warn_unused_result Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-15ALSA: azt3328: fix previous breakage, improve suspend, cleanupsAndreas Mohr
- fix my previous codec activity breakage (_non-warned_ variable assignment issue) - convert suspend/resume to 32bit I/O access (I/O is painful; to improve suspend/resume performance) - change DEBUG_PLAY_REC to DEBUG_CODEC for consistency - printk cleanup - some logging improvements - minor cleanup/improvements The variable assignment issue above was a conditional assignment to the call_function variable (this ended with the non-preinitialized variable not getting assigned in some cases, thus a dangling stack value, yet gcc 4.3.3 unbelievably did _NOT_ warn about it in this case!!), needed to change this into _always_ assigning the check result. Practical result of this bug was that when shutting down _either_ playback or capture, _both_ streams dropped dead :P Tested, working (plus resume) and checkpatch.pl:ed on 2.6.30-rc5, applies cleanly to 2.6.30 proper with my previous (committed) patches applied. Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - targa and targa-2ch fix ALSA: hda - fix beep tone calculation for IDT/STAC codecs ALSA: hda - Missing volume controls for Intel HDA (ALC269/EeePC) ALSA: hda - Disable AMD SB600 64bit address support only ALSA: hda - Check widget types while parsing capture source in patch_via.c ALSA: hda - Fix capture source selection in patch_via.c ALSA: hda - Add missing EAPD initialization for VIA codecs ALSA: hda - Clean up VT170x dig-in initialization code ALSA: hda - Fix error path in the sanity check in azx_pcm_open() ALSA: hda - move 8086:fb30 quirk (stac9205) to the proper section ASoC: Fix wm8753 register cache size and initialization ASoC: add locking to mpc5200-psc-ac97 driver ASoC: Fix mpc5200-psc-ac97 to ensure the data ready bit is cleared ASoC: Fix register cache initialisation for WM8753
2009-07-10ALSA: hda - Check codec errors in snd_hda_get_connections()Takashi Iwai
The codec read errors in snd_hda_get_connections() are ignored so far, and it causes a problem like the bug in the commit 9d30937accf2c01e8b0bd59787409a7348cbbcb7 ALSA: hda_intel: more strict alc880_parse_auto_config dig_nid checking Better to check errors in the function and returns a proper error code rather than passing bogus NID values. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-10ALSA: hda_intel: more strict alc880_parse_auto_config dig_nid checkingJaroslav Kysela
On some IbexPeak systems with ALC889A errors like "azx_get_response timeout, switching to polling mode: last cmd=0xaf9f000b" are produced, because non-existent codec #10 is wrongly accessed. The problem is that snd_hda_get_connections() returns out-of-range result for NID 0x1c (something like 0xf8f9 or 0xffff). This patch adds a check to alc880_parse_auto_config() to avoid using of this out-of-range NIDs. A better fix maybe to improve snd_hda_get_connections() routine to check for valid NID ranges if NIDs are expected as result. Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-10ALSA: hda - Fix the merge errorTakashi Iwai
Fix the merge error at the commit 305355aad89f1b7eb27cb210fad2f9d3c67b2572, an addition of the missing alc880_gpio3_init_verbs to ALC882_TARGA model. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-10Merge branch 'fix/hda' into for-linusTakashi Iwai
* fix/hda: ALSA: hda - targa and targa-2ch fix ALSA: hda - fix beep tone calculation for IDT/STAC codecs ALSA: hda - Missing volume controls for Intel HDA (ALC269/EeePC) ALSA: hda - Disable AMD SB600 64bit address support only ALSA: hda - Check widget types while parsing capture source in patch_via.c ALSA: hda - Fix capture source selection in patch_via.c ALSA: hda - Add missing EAPD initialization for VIA codecs ALSA: hda - Clean up VT170x dig-in initialization code ALSA: hda - Fix error path in the sanity check in azx_pcm_open() ALSA: hda - move 8086:fb30 quirk (stac9205) to the proper section
2009-07-09Merge branch 'fix/hda' into topic/hdaTakashi Iwai
Conflicts: sound/pci/hda/patch_realtek.c Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-09ALSA: hda - targa and targa-2ch fixDavid Heidelberger
Simplify ALC882_TARGA and return gpio3 to ALC883_TARGA_DIG and ALC883_TARGA_2ch_DIG, which I accidentally removed in commit id 64a8be74357477558183b43156c5536b642de134 Signed-off-by: David Heidelberger <d.okias@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-09ALSA: hda - don't build digital output controls if not existTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-09ALSA: hda - fix beep tone calculation for IDT/STAC codecsPaul Vojta
In the beep tone calculation for IDT/STAC codecs, lower numbers correspond to higher frequencies and vice versa. The current code has this backwards, resulting in beep frequencies which are way too high (and sound bad on tinny laptop speakers, resulting in complaints). [Also added hz <= 0 check by tiwai] Signed-off-by: Paul Vojta <vojta@math.berkeley.edu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-08Remove multiple KERN_ prefixes from printk formatsJoe Perches
Commit 5fd29d6ccbc98884569d6f3105aeca70858b3e0f ("printk: clean up handling of log-levels and newlines") changed printk semantics. printk lines with multiple KERN_<level> prefixes are no longer emitted as before the patch. <level> is now included in the output on each additional use. Remove all uses of multiple KERN_<level>s in formats. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-08ALSA: hda - Missing volume controls for Intel HDA (ALC269/EeePC)Darren Salt
There is a regression, introduced in aa202455eec51699e44f658530728162cefa1307 (in alsa-kernel) which I noticed when trying to use the headphone socket on my EeeCPC 901: the output was *very* quiet, practically silent. This patch corrects the control types to that which was obviously intended in the referenced commit. Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-08ALSA: hda - Add quirks for RTL888 & RV630/M76 based MSI GX710William Weston
Signed-off-by: William Weston <weston@sysex.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-08ALSA: hda - Fix compile warnings in patch_cirrus.cTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-08ALSA: hda - Disable AMD SB600 64bit address support onlyAndiry Brienza
HDA driver disabled HD audio 64bit address support for all AMD SB600/SB700/SB800 platforms with commit 09240cf429505891d6123ce14a29f58f2a60121e due to one SB600 issue reported by community, but we do not see the similar issue on SB700/SB800 platforms. This patch is to refine the workaround for SB600 only. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-08ALSA: hda - Check widget types while parsing capture source in patch_via.cTakashi Iwai
Check the widget type and don't take invalid widgets while parsing the capture source in patch_via.c. Also, fixed some compile warnings introduced in the previous commit. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-07ALSA: hda - Fix capture source selection in patch_via.cTakashi Iwai
The fixed widget NIDs in patch_via.c seem wrong for some codecs, and it resulted in the invalid capture source selection. This patch adds the code to parse the topology instead of using fixed numbers in order to get the right MUX widget id corresponding to the ADCs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-07ALSA: hda - Add missing EAPD initialization for VIA codecsTakashi Iwai
If the output pin is used and EAPD capability is present, turn on the EAPD bit. This fixes the silent output problem on ASUS laptops with VT1708S codec. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-07ALSA: hda - Clean up VT170x dig-in initialization codeTakashi Iwai
Minor clean up for initializing the digital-in pin. No functional changes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-07ALSA: hda - Fix the speaker volume control nameTakashi Iwai
Increase the name string buffer size so that "Surround Speaker Playback Volume" won't be truncated. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-07ALSA: hda - Add GPIO setup for MacBook pro 5,5 with CS420xTakashi Iwai
GPIO3 seems corresponding to EAPD that is required for the speaker output. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-06ALSA: hda - Add quirk for MacBook Pro 5,5 with CS4206Takashi Iwai
Add the default pin configs for MBP55. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-06ALSA: hda - Fix double creation of SPDIF input controlsTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-06ALSA: hda - Add CS420x-specific coef setupTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-06ALSA: hda - Force to initialize input mixer setup for CS420xTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-06ALSA: hda - Fix cirrus codec parsingTakashi Iwai
The parser wasn't called in the proper order. Split now the parser to be called in patch_cirrus(), and the rest are just for building PCMs and controls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-06ALSA: azt3328: large codec cleanup, add I2S port etc.Andreas Mohr
- fully separate codec I/O port handling, enabling the use of a single function each for all codecs (playback, capture, I2S out) - add a new separate pcm for I2S out port (UNTESTED, no I2S DAC available yet) - switch gameport to low frequency while idle, to try to reduce noise/power - improve snd_azf3328_codec_setdmaa() calculation - minor variable type cleanup (u16, bool etc.) - add some doc updates (help those lost Windows users, debug help, ...) Note that due to the large cleanup aspect of the codec I/O change, I was able to fit everything including all improvements into the same binary size!! (a measly 10 bytes more or so) This should now be the almost last patch to this driver (minus some possible kernel clocksource patch and x86_64 fixes or so). I just felt like taking a break from the usual stuff and wanted to get this driver's structure finished, and it's rather clean now... Tested, working and checkpatch.pl:ed on 2.6.30-rc5, applies cleanly to 2.6.30 proper. Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-06ALSA: azt3328: fix Kconfig entryAndreas Mohr
This driver is about as far from being experimental as it can ever get for an undocumented card, thus create this patch (interestingly it was the only EXPERIMENTAL remaining in the entire Kconfig file). Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-05ALSA: hda - Fix error path in the sanity check in azx_pcm_open()Takashi Iwai
Release resources cleanly after errors in the sanity check in azx_pcm_open(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-04Merge branch 'fix/hda' into topic/hdaTakashi Iwai
2009-07-04ALSA: hda - move 8086:fb30 quirk (stac9205) to the proper sectionHerton Ronaldo Krzesinski
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-03Merge branch 'fix/hda' into for-linusTakashi Iwai
* fix/hda: ALSA: hda - Add sanity check in PCM open callback ALSA: hda - Call snd_pcm_lib_hw_rates() again after codec open callback ALSA: hda - Avoid invalid formats and rates with shared SPDIF ALSA: hda - Improve ASUS eeePC 1000 mixer ALSA: hda - Add GPIO1 control at muting with HP laptops
2009-07-03ALSA: hda - Don't override maxbps for FLOAT sharing with linear formatsTakashi Iwai
When FLOAT PCM format is available but together with other linear PCM formats, don't override maxbps value. For FLOAT format, it's always 32, thus it can be better checked in snd_hda_calc_stream_format(). Otherwise the maxbps 32 might be used wrongly even if the linear PCM doesn't support it. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-03ALSA: hda - Add sanity check in PCM open callbackTakashi Iwai
Add some sanity checks of struct snd_pcm_hardware fields in the PCM open callback of hda driver. This makes a bit easier to debug any PCM setup errors in the codec side. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-03ALSA: hda - Call snd_pcm_lib_hw_rates() again after codec open callbackTakashi Iwai
The PCM rates bit field may have been changed by the codec open callback. In that case, we need to reset rate_min and rate_max. So, simply call snd_pcm_lib_hw_rates() again after the codec open callback. Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-16 20:49:58 +0000