summaryrefslogtreecommitdiffstats
path: root/sound/pci
AgeCommit message (Collapse)Author
2013-01-21ALSA: hda - Set the pin targets after deciding output configTakashi Iwai
Since fill_and_eval_dacs() may be called repeatedly with different configurations, setting pinctls at each time there isn't optimal. We can set it better only once after deciding the output configuration in parse_output_paths(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-21ALSA: hda - Improve debug prints for output pathsTakashi Iwai
Print the information of outputs in a bit more details and concisely in a single place instead of printing the path at each time when detected. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-19ALSA: hda - Add fixup for Acer AO725 laptopTakashi Iwai
Acer AO725 needs the same fixup as AO756. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52181 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-18ALSA: hda/conexant - Set mixer NID 0x19 for CX20551 codecTakashi Iwai
Conexant CX20551 codec has a mixer in NID 0x19 and a few outputs have to take the input through this widget. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-18ALSA: hda - Correct more array rooms in hda_gen_specTakashi Iwai
Looking through the whole definitions, some fields have inappropriate array sizes, especially about the capture. The array assigned to each input (pin) should have HDA_MAX_NUM_INPUTS entries while the array assigned to each ADC should have AUTO_CFG_MAX_INS entries. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-18ALSA: hda - Fix the wrong adc_idx for capture sourceTakashi Iwai
The patch "ALSA: hda - fix wrong adc_idx in generic parser" fixed the adc_idx for the capture volume and capture switch controls. But also modified the adc_idx retrieval for the capture source controls wrongly. As multiple capture source controls are created in a single shot with counts > 1, the id.index doesn't contain the real value. The real index has to be taken via snd_ctl_get_ioffidx() as in the original code. This patch reverts the fixes partially to recover from the regression. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-18ALSA: hda - Don't add unnecessary indices on HDMI and SPDIFDavid Henningsson
If there's one each of HDMI and SPDIF, we should not add an index on the one that comes second. [slight code refactoring by tiwai] Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-18ALSA: hda - don't compare with yourself in fill_input_pin_labelsDavid Henningsson
Just stumbled over this one while reading the code. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-18ALSA: hda - make sure there are enough input labels and pathsDavid Henningsson
I found a codec configuration which had six inputs, so the max of five was not appropriate. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-18ALSA: hda - Fix speaker pin of FSC Lifebook S7110 laptopTakashi Iwai
Some BIOS version of FSC Lifebook S7110 laptop seems to give a wrong default pin config for NID 0x15, which confuses the parser. Give a fixup to correct the value. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-18ALSA: hda - Add boost to line inputs, tooTakashi Iwai
Although I commented that boost volumes would be added only for line-in and mic pins in the source code, the actual code excludes but for mic-in. Fix it to accept the line-ins, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-18ALSA: hda/sigmatel - Add bass speaker support for HP ENVY Spectre XTTakashi Iwai
The pin configuration for the bass speaker needs to be corrected in a fixup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-18ALSA: hda - Consolidate cap_sync_hook and capture_switch_hookTakashi Iwai
Two hooks in hda_gen_spec, cap_sync_hook and capture_switch_hook, play very similar roles. The only differences are that the former is called more often (e.g. at init or switching capsrc) while the latter can take an on/off argument. As a more generic implementation, consolidate these two hooks, and pass snd_ctl_elem_value pointer as the second argument. If the secondary argument is non-NULL, it can take the on/off value, so the caller handles it like the former capture_switch_hook. If it's NULL, it's called in the init or capsrc switch case. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-18ALSA: hda - Fix missing call of capture_switch_hookTakashi Iwai
When a standard capture switch without multiple binding is used, the call for capture_switch_hook isn't called properly. Replace the put ops to add the hook call in that case. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-18ALSA: hda - Fix mute led for another HP machineDavid Henningsson
This machine also has the "HP_Mute_LED_0_A" string in DMI information. Cc: <stable@vger.kernel.org> BugLink: https://bugs.launchpad.net/bugs/1096789 Tested-by: Tammy Yang <tammy.yang@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-18ALSA: hda - Look for boost controls more deeplyTakashi Iwai
In the current generic parser code, we look for the (mic) boost controls only on input pins. But many codecs assign the boost volume to a widget connected to each input pin instead of the input amp of the pin itself. In this patch, the parser tries to look through more widgets connected to the pin and find a boost amp. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-18ALSA: hda - Fix invalid mute in path activationTakashi Iwai
When an amp in the activation path is associated with mixer controls, activate_amp() tries to skip the initialization. It's good, but only if the mixer really initializes both mute and volume. Otherwise, either the mute of the volume is left uninitialized. This patch adds this missing check and properly initialize the partially controlled amps in an activation path. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-18ALSA: hda - Unify input label creations in generic parserTakashi Iwai
There are a few places creating the labels and indices of kctls for each input pin in the current generic parser code. This is redundant and makes harder to maintain. Let's create the labels and indices at once and keep them in hda_gen_spec. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-18ALSA: hda - Keep autocfg.input idx value in imux tableTakashi Iwai
Since the imux table entries can be a subset of autocfg.input table, the indices of these aren't always same. For passing the proper index value of autocfg.input at creating input ctl labels (via snd_hda_autocfg_input_label()), keep the corresponding autocfg.input idx value in the index field of each imux item, which isn't used in the generic driver. Also, this makes easier to check the invalid imux pin for stereo mix. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-18ALSA: hda - Fix missing unsol event handler in some codec driversTakashi Iwai
This resulted in non-working auto-mute behavior, of course... Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-17ALSA: hda - Use generic parser for STAC/IDT codec driverTakashi Iwai
Finally we reached here. All codecs driver (except for CA0132, which has really device-specific requirements) have been converted to use the generic parser. This patch appears bigger than others since it also involves with the code shuffling, but mostly the cut-off of parser codes and adapt to the generic parser flags. Most of fixup codecs haven't been changed but just removed a few unnecessary codes. The only missing stuff is the SPDIF mux control. It'll be added again later. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-17Merge branch 'test/hda-gen-parser' into test/hda-migrateTakashi Iwai
* test/hda-gen-parser: ALSA: hda - Improve naming rule for primary output ALSA: hda - Add PCM capture hook to hda_gen_spec ALSA: hda - Record all detected ADCs in hda_gen_spec ALSA: hda - Move vmaster TLV parsing to snd_hda_gen_parse_auto_config() ALSA: hda - Add input jack mode enum controls to generic parser ALSA: hda - Give more comments to hda_gen_spec flags ALSA: hda - Add suppress_auto_mute flag to hda_gen_spec ALSA: hda - Record the current speaker / LO mute status in hda_gen_spec ALSA: hda - Properly call automute/switch hooks at init
2013-01-17ALSA: hda - Improve naming rule for primary outputTakashi Iwai
When the volume or mute control of the primary output is shared with other (headphone or speaker) outputs, we shouldn't name it as a specific output type but rather name it with the channel name or a generic name like "PCM". Also, this check should be performed individually for the volume and the mute controls because some codecs may have shared volumes but separate mute controls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-17ALSA: hda - Add PCM capture hook to hda_gen_specTakashi Iwai
Not only PCM playback, a hook for PCM capture would be required for power controls in codec drivers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-17ALSA: hda - Record all detected ADCs in hda_gen_specTakashi Iwai
Since the generic parser reduces the ADC list, copy the list of the all detected ADCs and keep it. This list can be later referred by the codec driver for finer power controls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-17ALSA: hda - Move vmaster TLV parsing to snd_hda_gen_parse_auto_config()Takashi Iwai
Add vmaster_tlv[] to hda_gen_spec and store the suggested TLV data in snd_hda_gen_parse_auto_config(). This allows the codec driver to correct the TLV data (e.g. mute capability) before actually creating vmaster instance. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-17ALSA: hda - Add input jack mode enum controls to generic parserTakashi Iwai
Just like the jack mode enum ctls for output jacks, add the support for similar enum ctls for input pins to control the bias Vref. The new controls will be added when spec->add_in_jack_modes is set either by the codec driver or by a hint string. Note that ground and 100% vrefs are excluded from the list for simplicity, currently. We may add a new flag to allow them, too. But I guess it's easier to put a value override in the pinfix in such a case. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-17ALSA: hda - Minor cleanup/fixes for patch_sigmatel.c fixup transitionTakashi Iwai
- spec->hp_detect has to be overridden in HDA_FIXUP_ACT_PARSE, not in PRE_PARSE. - Remove err == 0 check but return directly -EINVAL from stac92xx_parse_auto_config() - Set spec->default_polarity for 92HD71bxx - Some code shuffles Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-16ALSA: hda - Give more comments to hda_gen_spec flagsTakashi Iwai
Since we have many bit flags in hda_gen_spec, rearrange in sections and give more comments there. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-16ALSA: hda - Add suppress_auto_mute flag to hda_gen_specTakashi Iwai
A new flag to skip the auto-mute handling in the generic parser, just like suppress_auto_mic flag. It has to be set before calling snd_hda_gen_parse_auto_config(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-16ALSA: hda - Record the current speaker / LO mute status in hda_gen_specTakashi Iwai
... to be referred by the codec driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-16ALSA: hda - Properly call automute/switch hooks at initTakashi Iwai
... and a little bit of code refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-16Merge branch 'test/hda-gen-parser' into test/hda-migrateTakashi Iwai
* test/hda-gen-parser: ALSA: hda - Make sure fill_all_dac_nids is called for digital only codecs ALSA: hda - force different capture controls if amp caps differ ALSA: hda - do not add non-existing Mic boost controls ALSA: hda - initialize channel counts correctly ALSA: hda - fix wrong adc_idx in generic parser ALSA: hda - Check array bounds in get_input_path ALSA: hda - Add prefer_hp_amp flag to hda_gen_spec ALSA: hda - fix OOPS in hda_mark_cmd_cache_dirty ALSA: hda - Check pincap while parsing the configuration
2013-01-16ALSA: hda - Make sure fill_all_dac_nids is called for digital only codecsDavid Henningsson
Otherwise no PCM will be built for codecs without analog I/O. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-16ALSA: hda - force different capture controls if amp caps differDavid Henningsson
Otherwise setting the capture volume for amps will be weird and inconsistent (it will try to set values outside the range of the second amp based on capabilities of the first amp). Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-16ALSA: hda - do not add non-existing Mic boost controlsDavid Henningsson
If the input node does not have any volume capable input amp, don't add such a control. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-16ALSA: hda - initialize channel counts correctlyDavid Henningsson
Even a single DAC can output two channels, so the channel count is twice the number of DACs. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-16ALSA: hda - fix wrong adc_idx in generic parserDavid Henningsson
We use knew->index for adc_idx when we create "Capture Volume" and "Capture Switch", so use the same to retrieve adc_idx. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-16ALSA: hda - Check array bounds in get_input_pathDavid Henningsson
This gives us some additional safety. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-16ALSA: hda/ca0132 - Make some symbols staticTakashi Iwai
sound/pci/hda/patch_ca0132.c:387:19: sparse: symbol 'ca0132_voicefx' was not declared. Should it be static? Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-16ALSA: hdsp - Remove obsolete settings functionsAdrian Knoth
With HDSP_TOGGLE_SETTING in place, these functions are no longer required. Removing them makes the code DRY and considerably shorter. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-16ALSA: hdsp - Use HDSP_TOGGLE_SETTING to alter settingsAdrian Knoth
HDSP_TOGGLE_SETTING and its corresponding functions allow to change settings in the control register. Instead of using the specialised functions, use the generic code to make the code DRY. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-16ALSA: hdsp - Implement generic function to toggle settingsAdrian Knoth
The driver contains multiple similar functions that change only a single bit in the control register, only the bit position varies. This patch implements a generic function to toggle a certain bit position that will be used to replace the old code. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-16ALSA: hdsp - Fix detection for RME RPM/Multiface/Digiface ioboxesAdrian Knoth
The current iobox detection code reportedly fails for various users, so simply do what the Win32 driver does instead. Patch originally by Karl Grill <kgrill@chello.at> and then modified to comply with kernel coding guidelines + current HEAD. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-15ALSA: hda - Add prefer_hp_amp flag to hda_gen_specTakashi Iwai
Add a new flag to indicate whether HP amp is turned on as default for speaker or line-outs, and enable this for ALC260 codec, as many machines with this codec require the HP amp even for speakers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-15ALSA: hda/ca0132 - Fix a wrong comma in snd_printdd() callTakashi Iwai
sound/pci/hda/patch_ca0132.c: In function ‘ca0132_effects_set’: sound/pci/hda/patch_ca0132.c:3391:2: warning: too many arguments for format [-Wformat-extra-args] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-15ALSA: hda/ca0132 - Declare firmware only when really builtTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-15ALSA: hda/ca0132 - Fix possible invalid DMA channel deallocationTakashi Iwai
... in the error path in dspxfr_image(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-15ALSA: hda/ca0132 - Fix possible NULL dereferenceTakashi Iwai
Spotted by smatch, sound/pci/hda/patch_ca0132.c:1950 dspxfr_image() error: potential null dereference 'dma_engine'. (kzalloc returns null) sound/pci/hda/patch_ca0132.c:1950 dspxfr_image() error: we previously assumed 'dma_engine' could be null (see line 1857) Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-15ALSA: hda/ca0132 - Fix another smatch warningTakashi Iwai
sound/pci/hda/patch_ca0132.c:1781 dspxfr_one_seg() info: why not propagate 'status' from dsp_dma_stop() instead of (-5)? Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-15 03:42:43 +0000