summaryrefslogtreecommitdiffstats
path: root/sound/pci
AgeCommit message (Collapse)Author
2012-09-11Merge branch 'for-linus' into for-nextTakashi Iwai
To merge HD-audio fixes back to 3.7 development line
2012-09-11ALSA: hda - Replace with the generic fixup codes in patch_cirrus.cTakashi Iwai
... to make easier to integrate into the common generic parser in near future. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-11ALSA: hda - Check bit mask for codec SSID in snd_hda_pick_fixup()Takashi Iwai
snd_hda_pick_fixup() didn't check the case where the device mask bits are set, typically used for SND_PCI_QUIRK_VENDOR() entries. Fix this. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-11ALSA: hda - Avoid BDL position workaround when no_period_wakeup is setTakashi Iwai
Originally the bogus period at BDL head was introduced as a workaround for the mismatching position update at the period boundary, typically seen on dmix. However, for applications like PulseAudio that don't require period wake ups, this workaround is just superfluous. Thus better to disable it when no_period_wakeup is given in hw_params. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-11ALSA: hda_intel: add position_fix quirk for Asus K53ECatalin Iacob
Commit c20c5a841cbe47f5b7812b57bd25397497e5fbc0 changed some chipsets to default to POS_FIX_COMBO so they now use POS_FIX_LPIB instead of POS_FIX_POSBUF. Since then I've been getting artifacts on playback, including repeated sounds on my Asus laptop. My hardware is Cougar Point which the commit log of c20c5a841cbe47f5b7812b57bd25397497e5fbc0 mentions as tested so POS_FIX_COMBO probably works in general but apparently it doesn't on Asus K53E therefore the need for the quirk. Signed-off-by: Catalin Iacob <iacobcatalin@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-10ALSA: hda - Allow 3/5/7 channel map for HDMI/DPTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-10ALSA: hda - Fix Oops at codec reset/reconfigTakashi Iwai
snd_hda_codec_reset() calls restore_pincfgs() where the codec is powered up again, which eventually tries to resume and initialize via the callbacks of the codec. However, it's the place just after codec free callback, thus no codec callbacks should be called after that. On a codec like CS4206, it results in Oops due to the access in init callback. This patch fixes the issue by clearing the codec callbacks properly after freeing codec. Reported-by: Daniel J Blueman <daniel@quora.org> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-07ALSA: hda - Remove ignore_misc_bitDavid Henningsson
The purpose of this flag is unclear. If the problem is that some machines have broken misc/NO_PRESENCE bits, they should be fixed by pin fixups. In addition, this causes jack detection functionality to be flawed on the M31EI, where there are two jacks without jack detection (which is properly marked as NO_PRESENCE), but due to ignore_misc_bit, these jacks are instead being reported as being present but always unplugged. BugLink: https://bugs.launchpad.net/bugs/939161 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: ctxfi: Implement channel mapsTakashi Iwai
Assign the multi-channel map to front PCM, and other channel map to each other channel PCM. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: cmipci: Implement channel mappingTakashi Iwai
Simply enable the channel map according to the h/w capability. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: Implement channel maps for standard onboard AC97 driversTakashi Iwai
Just set the channel maps depending on the hardware availability. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: ac97: Implement channel map workaround for ALC650Takashi Iwai
ALC650 has a channel swap option between surround and CLFE channels, so we need to tweak the channel maps dynamically depending on the register bit. Now struct snd_ac97 can contain chmap pointers for playback and capture. The driver may store these and let ac97 driver changing the channel mapping dynamically. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: hda - Fix channel maps for Nvidia 7x 8ch HDMI codecsTakashi Iwai
Some old Nvidia HDMI codecs with 8ch support only 2/8 or 2/6/8 channels and with the fixed CLFE-first map. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: hda - Provide the proper channel mapping for generic HDMI driverTakashi Iwai
... instead of the standard fixed channel maps. The generic HDMI is based on the audio infoframe, and its configuration can be selected via CA bits. Thus we need a translation between the CA index and the verbose channel map list. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: hda - Add standard channel mapsTakashi Iwai
Although HD-audio allows pair-wise channel configurations, only the fixed channel positions are used in this version. In future, this can be changed and allow user to modify the channel positions. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: hda - Move non-PCM check to per_pin in patch_hdmi.cTakashi Iwai
Recently the check for non-PCM stream state was added to the generic HDMI driver code. But this check should be done rather to each pin instead of each converter. Otherwise when a different converter is assigned at the next open, the audio infoframe can be inconsistent with the setup using the previous converter. For fixing this issue, this patch moves the state of the current non-PCM status from per_cvt to per_pin. (In addition an unused argument cvt_nid is stripped from hdmi_setup_channel_mapping()) Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: hda - fix control names for multiple speaker out on IDT/STACDavid Henningsson
For multiple speaker outs, the names were previously "Speaker,0", "Speaker,1", "Center"/"LFE", "Speaker,3". This is inconsistent, confusing, and is not picked up correctly by PulseAudio. Instead use "Front", "Surround", "Center"/"LFE", "Side" which is more standard. BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1046734 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: hda - Fix missing Master volume for STAC9200/925xTakashi Iwai
With the commit [2faa3bf: ALSA: hda - Rewrite the mute-LED hook with vmaster hook in patch_sigmatel.c], the former Master volume control was converted to PCM. This was supposed to be covered by the vmaster control. But due to the lack of "PCM" slave definition, this didn't happen properly. The patch fixes the missing entry. Reported-by: Andrew Shadura <bugzilla@tut.by> Cc: <stable@vger.kernel.org> [v3.4+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: HDMI - Setup channel mapping for non_pcm audioWang Xingchao
For HBR stream test, use straight channel mapping way. when switched back to "speaker-test -c8", even the audio infoframe is up-to-date, there should be correct channel mapping setup. Signed-off-by: Wang Xingchao <xingchao.wang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: HDMI - Enable HBR feature on Intel chipsWang Xingchao
HDMI channel remapping apparently effects HBR packets on Intel's chips. For compressed non-PCM audio, use "straight-through" channel mapping. For uncompressed multi-channel pcm audio, use normal channel mapping. Signed-off-by: Wang Xingchao <xingchao.wang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: HDMI - Fix channel_allocation array wrong orderWang Xingchao
The array channel_allocations[] is an ordered list, add function to get correct order by ca_index. Signed-off-by: Wang Xingchao <xingchao.wang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-05ALSA: emu10k1: use list_move_tail instead of list_del/list_add_tailWei Yongjun
Using list_move_tail() instead of list_del() + list_add_tail(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-31ALSA: hda - Clean up redundant FG checksTakashi Iwai
Just refactoring, no functional changes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-31ALSA: hda - Yet another fix for D3 stop-clock refcountingTakashi Iwai
The call of pm_notify callback in snd_hda_codec_free() should be with the check of the current state whether pm_notify(false) is called or not, instead of codec->power_on check. For improving the code readability and fixing this inconsistency, codec->d3_stop_clk_ok is renamed to codec->pm_down_notified, and this flag is set only when runtime PM down is called. The new name reflects to a more direct purpose of the flag. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-30ALSA: cs5530: Fix resource leak in error pathTakashi Iwai
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=44741 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-30ALSA: korg1212: Fix reverted min/max ADC sense rangeTakashi Iwai
k1212MinADCSens and k1212MaxADCSens are defined wrongly. The max must be greater than the min by obvious reason. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=46561 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-30ALSA: hda - Optimize bitfield usage in struct hda_codecTakashi Iwai
Move up a few bitfields to be packed into a single int. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-30ALSA: hda - Clean up CONFIG_SND_HDA_POWER_SAVETakashi Iwai
CONFIG_SND_HDA_POWER_SAVE is no longer an experimental feature and its behavior can be well controlled via the default value and module parameter. Let's just replace it with the standard CONFIG_PM. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-30ALSA: hda - Fix D3 clock stop check for codecs with own set_power_state opTakashi Iwai
When a codec provides its own set_power_state op, the D3-clock-stop isn't checked correctly. And the recent changes for repeating the state-setting operation isn't applied to such a codec, too. This patch fixes these issues by moving the call of codec's own op to the place where the generic power-set operation is done, and move the power-state synchronization code out of snd_hda_set_power_state_to_all() so that it can be called always at the end of power-up/down sequence, and updates the D3 clock-stop flag properly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-30ALSA: hda - Fix runtime PM leftover refcountsTakashi Iwai
When the HD-audio is removed, it leaves the refcounts when codecs are powered up (usually yes) in the destructor. For fixing the unbalance, and cleaning up the code mess, this patch changes the following: - change pm_notify callback to take the explicit power on/off state, - check of D3 stop-clock and keep_link_on flags is moved to the caller side, - call pm_notify callback in snd_hda_codec_new() and snd_hda_codec_free() so that the refcounts are proprely updated. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-28Merge branch 'for-linus' into for-nextTakashi Iwai
Need to merge the fixes regarding EPSS. Conflicts: sound/pci/hda/hda_codec.c
2012-08-28ALSA: hda - Don't trust codec EPSS bit for IDT 92HD83xx & coTakashi Iwai
These codecs seem reporting EPSS but require longer delay for the proper D3 transition. For example, D3_STOP_CLOCK_OK bit won't be set correctly even after D3. In this patch, codec->epss flag is overridden for avoid the misbehavior. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-28ALSA: hda - Avoid unnecessary parameter read for EPSSTakashi Iwai
EPSS parameter should be static, so we can read it once and remember. This also allows more easily to override the wrong EPSS capability reported from a codec by changing the flag in the codec initialization step. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-28ALSA: hda - Make clear built-in driver optimizationTakashi Iwai
Use unsigned int to make clear that the codes required only for modules will be reduced by the compiler optimization. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-27ALSA: pcxhr: Add 8 new sound cardsMarkus Bollinger
add new sound cards VX442HR VX442e PCX442HR PCX442e VX822HR VX822e PCX822HR and PCX822e Signed-off-by: Markus Bollinger <bollinger@digigram.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-24ALSA: hda - bug fix on references without checking CONFIG_SND_HDA_POWER_SAVEMengdong Lin
The patch to support runtime PM introduced a bug: Module parameter 'power_save_controller', and the codec flag 'd3_stop_clk' 'd3_stop_clk_ok' are defined only when HDA power save is enabled in config. But there are references to them without checking macro CONFIG_SND_HDA_POWER_SAVE. This patch is to fix the bug. Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-23ALSA: hda - add runtime PM supportMengdong Lin
Runtime PM can bring more power saving: - When the controller is suspended, its parent device will also have a chance to suspend. - PCI subsystem can choose the lowest power state the controller can signal wake up from. This state can be D3cold on platforms with ACPI PM support. And runtime PM can provide a gerneral sysfs interface for a system policy manager. Runtime PM support is based on current HDA power saving implementation. The user can enable runtime PM on platfroms that provide acceptable latency on transition from D3 to D0. Details: - When both power saving and runtime PM are enabled: -- If a codec supports 'stop-clock' in D3, it will request suspending the controller after it enters D3 and request resuming the controller before back to D0. Thus the controller will be suspended only when all codecs are suspended and support stop-clock in D3. -- User IO operations and HW wakeup signal can resume the controller back to D0. - If runtime PM is disabled, power saving just works as before. - If power saving is disabled, the controller won't be suspended because the power usage counter can never be 0. More about 'stop-clock' feature: If a codec can support targeted pass-through operations in D3 state when there is no BCLK present on the link, it will set CLKSTOP flag in the supported power states and report PS-ClkStopOk when entering D3 state. Please refer to HDA spec section 7.3.3.10 Power state and 7.3.4.12 Supported Power State. [Fixed CONFIG_PM_RUNTIME dependency in hda_intel.c by tiwai] Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-22ALSA: hda - Call snd_hda_jack_report_sync() generically in hda_codec.cTakashi Iwai
Instead of calling the jack sync in the init callback of each codec, call it generically at initialization and resume. By calling it at the last of resume sequence, a possible race between the jack sync and the unsol event enablement in the current code will be closed, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-22ALSA: hda - Do not set GPIOs for speakers on IDT if there are no speakersDavid Henningsson
This fixes an issue with a machine where there were no speakers, but GPIO0 had to be data=1 for the headphone to be functioning. I'm not sure if we need a more advanced patch to solve all possible cases, but if so, this patch would still provide a minor optimisation. BugLink: https://bugs.launchpad.net/bugs/1040077 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-20workqueue: deprecate flush[_delayed]_work_sync()Tejun Heo
flush[_delayed]_work_sync() are now spurious. Mark them deprecated and convert all users to flush[_delayed]_work(). If you're cc'd and wondering what's going on: Now all workqueues are non-reentrant and the regular flushes guarantee that the work item is not pending or running on any CPU on return, so there's no reason to use the sync flushes at all and they're going away. This patch doesn't make any functional difference. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Mattia Dongili <malattia@linux.it> Cc: Kent Yoder <key@linux.vnet.ibm.com> Cc: David Airlie <airlied@linux.ie> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Bryan Wu <bryan.wu@canonical.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-wireless@vger.kernel.org Cc: Anton Vorontsov <cbou@mail.ru> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Petr Vandrovec <petr@vandrovec.name> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Avi Kivity <avi@redhat.com>
2012-08-20Merge branch 'for-linus' into for-nextTakashi Iwai
Conflicts: sound/pci/hda/hda_codec.c Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-20ALSA: hda - Fix leftover codec->power_transitionTakashi Iwai
When the codec turn-on operation is canceled by the immediate power-on, the driver left the power_transition flag as is. This caused the persistent avoidance of power-save behavior. Cc: <stable@vger.kernel.org> [v3.5+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-20ALSA: hda - Add missing ifdef CONFIG_SND_HDA_POWER_SAVE to tracepointsTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-20ALSA: hda - Check the power state when power_save option is changedTakashi Iwai
... by calling the newly introduced snd_hda_power_sync(). I had to reimplement a wheel for adding the trigger at changing the parameter -- the parameter set ops is overwritten to pass the integer parameter, then trigger the power-state sync. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-20ALSA: hda - Implement snd_hda_power_sync() helper functionTakashi Iwai
Added a new helper function snd_hda_power_sync() to trigger the power-saving manually. It's an inline function call to snd_hda_power_save() helper function. Together with this addition, snd_hda_power_up*() and snd_hda_power_down() functions are inlined to a call of the same snd_hda_power_save() helper function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-20Merge branch 'topic/ca0132-fix' into for-linusTakashi Iwai
This is a series of fixes for CA0132, especially the missing SPDIF I/O and the mixer build errors.
2012-08-20ALSA: hda - don't create dysfunctional mixer controls for ca0132David Henningsson
It's possible that these amps are settable somehow, e g through secret codec verbs, but for now, don't create the controls (as they won't be working anyway, and cause errors in amixer). Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/1038651 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-20ALSA: hda - Add tracepoints at snd_hda_power_up/down entrances.Takashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-20ALSA: sound/pci/rme9652/hdspm.c: fix error return codeJulia Lawall
Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-20ALSA: sound/pci/sis7019.c: fix error return codeJulia Lawall
Initialize rc before returning on failure, as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-15 20:26:48 +0000