summaryrefslogtreecommitdiffstats
path: root/sound/pci
AgeCommit message (Collapse)Author
2011-05-16ALSA: hda - Don't create multiple same volume/boost controls in Cxt auto-parserTakashi Iwai
Check the routing more exactly for avoiding the duplicated controls for the very same effect for multiple capture routes in Conexant auto-parser. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-16ALSA: hda - Build boost controls from selector widget in Cxt auto-parserTakashi Iwai
When the intermediate selector widget in the capture path provides the boost volume, create the corresponding volume control. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-15ALSA: hda - Don't use auto-parser for cxt5045 / 5051 as defaultTakashi Iwai
Just for safety reason (for avoiding any possible regressions), don't enable auto-parser as default for cxt5045 and 5051, as well as 5047. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-15ALSA: hda - Enable codec->pin_amp_workaround always for Conexant auto-parserTakashi Iwai
It can (must for some) be used for all Conexnat codecs safely. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-15ALSA: hda - Search ADC NIDs dynamically in Conexant auto-parserTakashi Iwai
Instead of giving fixed arrays, look for ADC nids dynamically in the tree in Conexant auto-parser code. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-13ALSA: hda - Add support of auto-parser to cxt5047 / CX20551 WaikikiTakashi Iwai
Similarly like other Conexant codecs, now model=auto is supported for cxt5047. But the auto-parser mode isn't activated as default yet, since BIOS pin-configs seem often broken on machines with this codec. User need to pass model=auto explicitly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-13ALSA: hda - Parse more deep input-source routes in Conexant auto-parserTakashi Iwai
Handle not only a single-depth input-route but two-level depth routes (PIN->MUX->ADC), too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-13ALSA: hda - Clean up input-mux handling in Conexant auto-parserTakashi Iwai
Keep the registered input-pins in imux_pins[], and fix the inconsistent use of sepc->auto_mic_ext. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-13ALSA: hda - Add auto-parser support to cxt5045 / CX20549 VeniceTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-13ALSA: hda - Add auto-parser support to cxt5051 / CX20561 HermosaTakashi Iwai
Extend the existing auto-parser for CX2064x for cxt5051 codec. Now the auto-parser supports ADC-switching for this codec. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-13ALSA: hda - Check AMP CAP at initialization of Conexant auto-parserTakashi Iwai
Some codecs have no mute caps in audio I/O widgets. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-13ALSA: hda - Turn on EAPD dynamically per jack plug in Conexant auto modeTakashi Iwai
Instead of keeping always EAPD on, turn on/off appropriately at jack plugging in Conexant auto-parser mode. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-13ALSA: hda - Fix auto-mic for CX2064x codecsTakashi Iwai
The wrong id is assigned for external/internal mics in the auto-mic selection parser. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-04ALSA: hda - Use position_fix=3 as default for AMD chipsetsTakashi Iwai
AMD chipsets often behave pretty badly regarding the DMA position reporting. It results in the bad quality audio recording. Using position_fix=3 works well in general for them, so let's enable it as default for AMD. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-03ALSA: hda - fix NULL-dereference in patch_realtekRaymond Yau
Fix NULL-dereference when try to use alt_playback since those codecs which support multistreaming playback usually have more than 1 adc but the driver should create alt_capture when spec->stream_analog_alt_capture is also defined. Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-02Merge branch 'fix/hda' into topic/hdaTakashi Iwai
2011-05-02ALSA: hda - Fix Realtek's chained fixup checksTakashi Iwai
The check of chained fixup list entry was done against the wrong element. A stupid mistake during refactoring. Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-02ALSA: hda - Constify fixup and other array data in patch_via.cTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-02ALSA: hda - Constify fixup and other array data in patch_sigmatel.cTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-02ALSA: hda - Constify fixup and other array data in patch_si3054.cTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-02ALSA: hda - Constify fixup and other array data in patch_hdmi.cTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-02ALSA: hda - Constify fixup and other array data in patch_conexant.cTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-02ALSA: hda - Constify fixup and other array data in patch_cirrus.cTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-02ALSA: hda - Constify fixup and other array data in patch_ca0110.cTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-02ALSA: hda - Constify fixup and other array data in patch_cmedia.cTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-02ALSA: hda - Constify fixup and other array data in patch_analog.cTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-02ALSA: hda - Constify fixup and other array data in patch_realtek.cTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-02ALSA: hda - Constify some API function argumentsTakashi Iwai
Also fixed the assignment of multiout.dac_nids to satisfy const. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-02ALSA: hda - Constify fixup and other array data in patch_realtek.cTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-02ALSA: hda - Constify some API function argumentsTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-02Merge branch 'fix/hda' into topic/hdaTakashi Iwai
2011-05-02Revert "ALSA: hda - Fix pin-config of Gigabyte mobo"Takashi Iwai
This reverts commit c6b358748e19ce7e230b0926ac42696bc485a562. It turned out that there are different pin configurations for this PCI SSID, including multi-channel modes. And more proper fix for allowing line-out mutes will come up in 2.6.40 tree, so we won't need this fixup any more there. Reported-by: Andrew Clayton <andrew@digital-domain.net> Reported-by: Emmanuel Benisty <benisty.e@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-29ALSA: HDA: Fix automute for Gateway NV79David Henningsson
The PCI SSID is 1025:031c and the codec SSID is 1025:031d, so the driver mistakes this for a SKU value, but looking at the numbers, this is obviously wrong. Cc: stable@kernel.org (2.6.38+) BugLink: http://bugs.launchpad.net/bugs/761861 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-29ALSA: hda - Show the line-out type in snd_hda_parse_pin_def_config()Takashi Iwai
Helpful for debugging. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-29ALSA: hda: add beep quirk for Realtek 0x1043:831aDaniel Cordero
PC Beep was not being reported as enabled on my EeePC 901: SKU: enable_pcbeep=0x0 Signed-off-by: Daniel Cordero <danielcordero@lavabit.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-28ALSA: hda - Add Auto-Mute Mode enum for two-output casesTakashi Iwai
The Auto-Mute Mode control is useful even when only two outputs (e.g. HP and speaker) are available. Then user can enable/disable the auto-mute behavior on the fly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-28ALSA: hda - More line-out auto-mute support for RealtekTakashi Iwai
Not only supporting the line-out automute as additional feature to the existing headphone automute, now the headphone jack can mute the line-out alone even without the speaker outs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-28ALSA: hda - Add support for Line-Out automute to Realtek auto-parserTakashi Iwai
By popular demands, I add the functionality to mute / unmute the line-out jacks per the headphone plug / unplug. For achieving this and keeping the compatibility with the old behavior, the new mixer enum "Auto-Mute Mode" is added. With this, user can control the auto-mute behavior either disabled, speaker-only or lineout+speaker. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-28ALSA: hda - More reduction of redundant automute codes in Realtek parserTakashi Iwai
Removed the redundant codes by replacing with the common helper functions. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-28ALSA: hda - Consolidate auto-mute with master-switch for RealtekTakashi Iwai
Yet another consolidation of auto-mute functions for the devices controlling the output muts together with the master mixer switch, typically found for ALC262 machines. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-28ALSA: hda - Add support of line-out automute for RealtekTakashi Iwai
Add the common helper function and flags to support the auto-mute per line-out jack detection, and also the mute of line-out jacks. A few model-specific implementations are replaced with the common helpers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-28ALSA: hda - Add common automute support for mxier-amp on/off for ReatekTakashi Iwai
Some models do mute on/off the connected mixer widget for the automatic muting, instead of controlling the pin widget itself. This patch adds the implementation of such type of auto-mute in the common helper function, and reduces the redundant codes for each model preset. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-28ALSA: hda - Consolidate default automute functions for RealtekTakashi Iwai
There are two entry points for the headphone automute functions for Realtek, alc_automute_amp() and alc_automute_pin(). These call the same function in the end, so we can basically consolidate these with a flag in spec. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-28ALSA: hda - VIA: Fix notify_aa_path_ctls() invalid issue.Lydia Wang
In notify_aa_path_ctls(), adds 'rear mic' item and confirms the A-A path control existing before notifying card that the A-A path volume is muted if smart5.1 is enabled. Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-27ALSA - au88x0 - Add buffer bytes constraintsRaymond Yau
This allow application such as gstreamer and wine which use snd_pcm_hw_params_set_buffer_time_near() won't fail any more since sound chips require special containt power 2 period bytes Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-27ALSA: hda - Add channel-mode support to Realtek auto-parserTakashi Iwai
This patch adds the support of "Channel Mode" enum control to Realtek auto-parser. When line-in or mic-in jacks are capable to output and free DACs are available, the driver allows to switch to multi-channel mode via "Channel Mode" enum switch, as already implemented in some preset cases. Not implemented in all Realtek codecs. Currently, ALC880, 882, 861, 662 and the compatible codecs are supported. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-27ALSA: hda - Minor update for alc662-parser functionsTakashi Iwai
Allow alc662_dac_to_mix() and alc662_look_for_dac() to parse down the selector widget that is found in ALC880-type codecs, and rename them to alc_auto_*() accordingly. This is for the next coming multi-io extensions. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-27ALSA: hda - VIA: Fix Smart5.1 isn't useful for 6 audio jacks motherboard.Lydia Wang
For some motherboards with 5 or 6 audio jacks which had six or eight multiple channels output, smart5.1 item is no useful and should be removed. Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-26ALSA: hda - Enable sync_write workaround for AMD genericallyTakashi Iwai
The workaround for AMD chipset via sync_write flag seems needed for machines with Realtek codecs. So, it's better to activate it generically in hda_intel.c from the beginning. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-26ALSA: hda - Move EAPD power-down into shutup callback for AD codecsTakashi Iwai
EAPD power-down should be called also for normal shutup cases. Let's move to there. This also fixes the compile warnings when CONFIG_PM isn't set automatically. Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-05 14:03:21 +0000