summaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs/wm8994.c
AgeCommit message (Collapse)Author
2011-05-16ASoC: Fix wrong data type access in a few codec driversJarkko Nikula
Commit fafd217 ("ASoC: Store a list of widgets in a DAPM mux/mixer kcontrol") changed the control private data type that is passed to snd_soc_cnew when creating dapm mixer and mux controls. Commit did not update a few codec drivers that are using their own put callbacks and thus are accessing a wrong data type. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-11ASoC: Disable WM8994/58 microphone detection over suspendMark Brown
It will be non-functional with the basises and clocks off anyway, if the system needs microphone detection enabled over suspend then it should be causing the CODEC to ignore suspend using the APIs for that to prevent the biases being disabled. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-07Merge branch 'for-2.6.39' into for-2.6.40Mark Brown
2011-04-07ASoC: Set left channel volume update bits for WM8994Mark Brown
Ensures that we apply volume updates that don't affect the right channel. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-22ASoC: Add WM8958 enhanced EQ supportMark Brown
DSP2 in the WM8958 can be used to support an upgraded EQ for use in demanding applications. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-03-22ASoC: Add WM8958 VSS supportMark Brown
With appropriate firmware the WM8958 can support Virtual Surround Sound or VSS, widening the stereo audio image for improved user experience. Enable support for this mode of operation when the appropriate firmware can be loaded at runtime. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-03-22ASoC: Support download of WM8958 MBC firmwareMark Brown
Allow userspace to supply an update to the ROM firmware. The firmware request is non-blocking so userspace can load the firmware at its leisure without delaying startup, the driver will begin using the firmware the next time MBC is started after it has been supplied. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-03-18ASoC: Mark WM8958 DSP2 registers readableMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-18ASoC: Handle startup sequencing of WM8958 DSP2 with deferred clockingMark Brown
The DSP2 startup requires that the clock be enable so if we've deferred clock startup we need to defer DSP2 startup Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-18ASoC: Factor WM8958 DSP2 handling into separate fileMark Brown
DSP2 on the WM8958 has a default ROM which provides a multi-band compressor for enhanced performance on mobile devices but can also support runtime download of alternative firmware. In preparation for more exploiting this functionality refactor the code to split the handling of DSP2 into a separate file. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-18ASoC: Treat WM8958 revision A as WM8994 revision DMark Brown
The first WM8958 revision requires similar treatment. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-10Merge branch 'for-2.6.38' into for-2.6.39Mark Brown
2011-03-09ASoC: Ensure WM8958 gets all WM8994 late revision widgetsMark Brown
Without this fix the driver won't instantiate properly on relevant devices. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Cc: stable@kernel.org
2011-03-09ASoC: Fix typo in late revision WM8994 DAC2R nameMark Brown
Without this fix the driver won't instantiate properly on relevant devices. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Cc: stable@kernel.org
2011-03-01ASoC: WM8994: Ensure MICBIAS is provided with a clockDimitris Papastamos
The patch 'ASoC: WM8994: Improve Playback Robustness' did not handle this case properly. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-01Merge branch 'for-2.6.38' into for-2.6.39Mark Brown
2011-03-01ASoC: WM8994: Ensure late enable events are processed for the ADCsDimitris Papastamos
Ensure that the ADCs are provided with a clock as the previous patch "ASoC: WM8994: Improve playback robustness" did not handle this case properly. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-03-01ASoC: WM8994: Don't disable the AIF[1|2]CLK_ENA unconditionalyDimitris Papastamos
Since we began using the late clock disable functionality, ensure that we don't disable the clock if any of the ADC or DAC paths are still enabled. This happens when we have simultaneous playback and recording. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-02-22ASoC: Simplify default WM8958 jack detection codeMark Brown
The default WM8958 jack detection handler implements a full set of buttons and also support for video detection. Support for multi-button jacks is fairly system specific and will usually require some tuning for headsets so simplify the implementation to only report a simple short to ground button, leaving multi-button headsets to be handled by system specific code. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-22ASoC: Support configuration of WM8958 microphone bias analogue parametersMark Brown
The WM8958 has a different microphone bias architecture to WM8994 so needs different configuration to WM8994. Support this in platform data. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-22ASoC: Support WM8958 direct microphone detection IRQMark Brown
Allow direct routing of the WM8958 microphone detection signal to a GPIO to be used, saving the need to demux the interrupt. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-22Merge branch 'for-2.6.38' into for-2.6.39Mark Brown
2011-02-22ASoC: Fix WM8958 default microphone detection argument orderingMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-18ASoC: Fix missing space in WM8994Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-13Merge branch 'for-2.6.38' into for-2.6.39Mark Brown
2011-02-13ASoC: WM8994: Improve playback robustnessDimitris Papastamos
On WM8994 revision D and earlier ensure proper playback robustness as some rare use cases can trigger issues. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-02-13ASoC: WM8994: Improve robustness in some use casesDimitris Papastamos
Ensure that on disabling certain registers such as AIF1DAC1L, AIF1DAC1R etc. the AIF1CLK and AIF2CLK remain enabled. Similarly when enabling those registers, AIF1CLK and AIF2CLK will remain disabled. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-02-03Merge branch 'for-2.6.38' into for-2.6.39Mark Brown
2011-02-03ASoC: Improve WM8994 digital power sequencingMark Brown
On WM8994 revision D and earlier ensure optimal sequencing with simultaneous usage of AIF1 and AIF2 by tying the signals together so if paths through both are connected the streams are started simultaneously. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
2011-02-03ASoC: Create an AIF1ADCDAT signal widget to match AIF2Mark Brown
Due to the different routing for AIF1 and AIF2 we weren't using a single widget to represent the ADCDAT signal. For consistency add one. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
2011-01-19Merge branch 'for-2.6.38' into for-2.6.39Mark Brown
2011-01-19ASoC: WM8994: fix wrong value in tristate functionQiao Zhou
fix wrong value in wm8994_set_tristate func. when updating reg bits, it should use "value", not "reg". Signed-off-by: Qiao Zhou <zhouqiao@marvell.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-01-13ASoC: Update users of readable_register()/volatile_register()Dimitris Papastamos
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-29ASoC: Yet more x86 tracepoint workaroundsMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-22ASoC: Trace Wolfson jack detection IRQsMark Brown
Add jack detection interrupt trace to Wolfson CODEC drivers. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-21ASoC: Fix WM8994/58 3D stereo control definitionsMark Brown
Cut'n'paste in the register names. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-13ASoC: Fix widgets for WM8994/58 AIF2 source controlMark Brown
The compiler really ought to have been warning about unreferenced variables... Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-10ASoC: Implement WM8994/58 DAC and ADC oversampling controlMark Brown
The oversampling rate of the DAC and ADC can be controlled to optimise for either low power consumption or maximum performance. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-08ASoC: Add ADC high pass filter support to WM8994Uk Kim
Signed-off-by: Uk Kim <w0806.kim@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-08ASoC: Support WM8994 mono AIF configurationsMark Brown
The WM8994 supports mono signals - enable this in the driver. With DSP mode an automatic data channel selector is available, activate this when in mono mode. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-03ASoC: When disabling WM8994 FLL force a source selectionMark Brown
When we disable the WM8994 FLL code path sharing means that we end up writing out a configuration. Currently this is the currently active input and output frequency (which causes snd_soc_update_bits() to suppress actual writes both immediately and in the common case where we reenable the same configuration later) but we allow machine drivers to pass through a source of zero. Since the register values written are one less than the source constants this causes corruption of other bitfields in the register. Fix this by using the most recently configured FLL source when none is provided. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
2010-12-02ASoC: Tune performance of WM8958 revision AMark Brown
Update some of the default configuration for the device to improve the performance. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-01ASoC: Allow user-specified WM8958 multiband compressor configurationsMark Brown
The paramters of the WM8958 multiband compressor can be tuned by the user for their system using a graphical configuration tool on the host. Allow the user to specify a set of such paramters in platform data and select between them at runtime. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-01ASoC: Correct event flags for WM8958 AIF DACsMark Brown
We need a post notification as we need to shut down the MBC after the data stops flowing rather than before. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-27ASoC: Implement runtime PM for WM8994/58Mark Brown
This allows us to communicate our power management state back to the parent device, allowing it to do a full power down when the device is idle. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-27ASoC: Enable rbtree compression for WM8994/58 register cacheMark Brown
The WM8994 and WM8958 register map is relatively sparse so benefits from compression. The rbtree compression gives better results than LZO for both memory and CPU consumption on a map as sparse as this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-27ASoC: Convert WM8994 to use soc-cache.c cache functionsMark Brown
In the process we convert the driver to read registers one at a time when initialising the cache. This has the effect of working around limitations in the sizes of I2C transactions which can be done by some CPUs. Due to the sparseness of the register map the overhead from this should be minimual unless I2C transactions are very expensive to start. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-27ASoC: Add WM8958 microphone detection supportMark Brown
The WM8958 contains an advanced accessory detection feature which allows detection of up to seven different impedence levels on the microphone bias output, including detection of video outputs. Since some of the more involved accessory interfaces may involve noticable interactions with external components a simple detection scheme is provided by default with the option to provide custom handling of accessory detect. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-27ASoC: Add WM8958 Multi-band compressor supportMark Brown
The WM8958 features a multi-band compressor which can be enabled on any of the AIF inputs. The MBC allows different gains to be applied to differnt audio bands, providing an improvement in perceived loudness of the signal by avoiding overdriving the output transducers. This patch enables support for the MBC. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-27ASoC: Implement support for enhanced AIF3 on WM8958Mark Brown
Additional audio routing options are available on the WM8958 audio interface 3. Add support for these. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-12 16:19:24 +0000