summaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs/wm8994.c
AgeCommit message (Collapse)Author
2011-11-04ASoC: Ensure we get an impedence reported for WM8958 jack detectMark Brown
Occasionally we may see an accessory reported before we have a stable impedance for the accessory. If this happens then reread the status in order to ensure that the handler can take the appropriate action for the status change. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-04ASoC: Don't use wm8994->control_data when requesting IRQsMark Brown
The field is no longer initialised so this will crash if running on wm8958. Reported-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-04ASoC: Don't use wm8994->control_data in wm8994_readable_register()Mark Brown
The field is no longer initialised so this will crash if running on wm8958. Reported-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-10-20ASoC: wm8994: Use SND_SOC_DAPM_AIF_OUT for AIF3 CaptureAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-10-18ASoC: Update WM1811 DCS codes for latest evaluation resultsMark Brown
Evaluation of larger quantities of material has provided new DCS codes values to be applied for WM1811. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-10-12ASoC: Remove impossible case from wm8994_hw_paramsAxel Lin
We set hw_params callback for wm8994_aif3_dai_ops to wm8994_aif3_hw_params. Thus no need to check wm8994-aif3 in wm8994_hw_params. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04Merge branch 'for-3.1' into for-3.2Mark Brown
2011-10-04ASoC: wm8994: Fix setting rate_reg for wm8994-aif2Axel Lin
For wm8994-aif2, the rate_reg should be WM8994_AIF2_RATE. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-10-04ASoC: wm8994: Slightly optimize configure_clockAxel Lin
snd_soc_update_bits() will only write new register value if the old value is different from the new value. In additional, snd_soc_update_bits() returns 0 for no change. No need to read WM8994_CLOCKING_1 register before calling snd_soc_update_bits(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: Add WM1811 supportMark Brown
The WM1811 is mostly register compatible with the WM8994 and WM8958, providing a high performance audio hub CODEC in a small form factor suitable for ultra compact system designs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-17ASoC: Fix backport of WM8994 thermal warningMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
2011-08-17ASoC: Implement WM8994 thermal warning and shutdown interrupt supportMark Brown
ALSA doesn't really have good mechanisms for dealing with these so we just log them - the hardware already has automatic shutdown support. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-17ASoC: Add WM8958 noise gate supportMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-15ASoC: Disable pulls on WM8994 AIF2 when starting itMark Brown
Pull control is availalbe for WM8994 AIF2, generally disabled as part of the GPIO configuration in order to save power after system startup. As on newer devices in the series there is no GPIO functionality on these pins this will happen less naturally so have the driver disable the pulls as the AIF is probed. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-14ASoC: Disable WM8994 VMID for digital only pathsMark Brown
On WM8994 class devices only the analogue portions of the CODEC require VMID so when running digital only paths we can leave VMID disabled. On some earlier devices the FLL uses VMID so we don't use DAPM reference counting alone, we maintain an internal reference count which is also enabled and disabled by the FLL startup. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-14ASoC: Add VMID widget for wm_hubs devicesMark Brown
Currently this does not actually do anything, it is being introduced in order to facilitate additional power optimisations for current generation devices. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-11Merge branch 'for-3.1' into for-3.2Mark Brown
2011-08-11ASoC: Add missing break in WM8994 probeMark Brown
This error would have no effect on current silicon revisions, the fall through case has the same behaviour. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-01ASoC: Support separate left and right channel dcs_codes valuesMark Brown
Some devices can have performance optimized by setting different offsets for left and right channels. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-01ASoC: Implement new DC servo readback mode for late WM8994 revisionsMark Brown
Later WM8994 devices implement a new DC servo readback mode with the register used to access the offset moved to register 0x59. Implement support for this and enable it on the appropriate devices. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-07-17Merge branch 'for-3.0' into for-3.1Mark Brown
2011-07-17ASoC: Correct WM8994 MICBIAS supply widget hookupMark Brown
The WM8994 and WM8958 series of devices have two MICBIAS supplies rather than one, the current widget actually manages the microphone detection control register bit (which is managed separately by the relevant API). Fix this, hooking the relevant supplies up to the MICBIAS1 and MICBIAS2 widgets. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-07-17ASoC: Reduce power consumption for idle DAIs in WM8994Mark Brown
If DAIs are idle but their clocks are in use for some reason (eg, as SYSCLK or for accessory detect) then set the clock dividers to the maximum to reduce slightly the power consumption of the unclocked circuits. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-17ASoC: Handle failed WM8994 FLL lock waitsMark Brown
Try the completion before we start the FLL so that if an interrupt was delayed long enough for us to miss it we don't wait for the completion it signalled. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-15Merge branch 'for-3.0' into for-3.1Mark Brown
2011-07-15ASoC: Fix shift in WM8958 accessory detection default implementationMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-07-14ASoC: Log WM8994 FIFO errors from the interruptMark Brown
We should spot them anyway on state changes but logging them gives us better time information about when the misconfiguration happened. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-14ASoC: Don't warn on low WM8994/58 AIFnCLKsMark Brown
We can have valid but very low clocks in accessory detection modes. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-14ASoC: Use WM8994 FLL lock interruptMark Brown
If we have interrupts then wait for the FLL lock interrupt rather than using dead reckoning when waiting for the FLL to start. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-14ASoC: Hook up DC servo completion IRQ for WM8994 and WM8958Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-14ASoC: Use late enable handling for direct voice, speaker and headphoneMark Brown
This ensures appropriate clocking for bypass paths to speaker and headphone and direct voice paths on affected revisions. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-09ASoC: Conditionalize the enable of WM8994 ADC TDM modeMark Brown
Future devices will not benefit from this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-07-04Merge branch 'for-3.0' into for-3.1Mark Brown
2011-07-04ASoC: Ensure we delay long enough for WM8994 FLL to lock when startingMark Brown
This delay is very conservative. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Cc: stable@kernel.org
2011-06-23ASoC: Trigger wm_hubs series update startup off a separate flagMark Brown
Allowing the two to be used independently. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-05-16ASoC: Fix wrong data type access in a few codec driversJarkko Nikula
Commit fafd217 ("ASoC: Store a list of widgets in a DAPM mux/mixer kcontrol") changed the control private data type that is passed to snd_soc_cnew when creating dapm mixer and mux controls. Commit did not update a few codec drivers that are using their own put callbacks and thus are accessing a wrong data type. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-11ASoC: Disable WM8994/58 microphone detection over suspendMark Brown
It will be non-functional with the basises and clocks off anyway, if the system needs microphone detection enabled over suspend then it should be causing the CODEC to ignore suspend using the APIs for that to prevent the biases being disabled. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-07Merge branch 'for-2.6.39' into for-2.6.40Mark Brown
2011-04-07ASoC: Set left channel volume update bits for WM8994Mark Brown
Ensures that we apply volume updates that don't affect the right channel. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-22ASoC: Add WM8958 enhanced EQ supportMark Brown
DSP2 in the WM8958 can be used to support an upgraded EQ for use in demanding applications. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-03-22ASoC: Add WM8958 VSS supportMark Brown
With appropriate firmware the WM8958 can support Virtual Surround Sound or VSS, widening the stereo audio image for improved user experience. Enable support for this mode of operation when the appropriate firmware can be loaded at runtime. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-03-22ASoC: Support download of WM8958 MBC firmwareMark Brown
Allow userspace to supply an update to the ROM firmware. The firmware request is non-blocking so userspace can load the firmware at its leisure without delaying startup, the driver will begin using the firmware the next time MBC is started after it has been supplied. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-03-18ASoC: Mark WM8958 DSP2 registers readableMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-18ASoC: Handle startup sequencing of WM8958 DSP2 with deferred clockingMark Brown
The DSP2 startup requires that the clock be enable so if we've deferred clock startup we need to defer DSP2 startup Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-18ASoC: Factor WM8958 DSP2 handling into separate fileMark Brown
DSP2 on the WM8958 has a default ROM which provides a multi-band compressor for enhanced performance on mobile devices but can also support runtime download of alternative firmware. In preparation for more exploiting this functionality refactor the code to split the handling of DSP2 into a separate file. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-18ASoC: Treat WM8958 revision A as WM8994 revision DMark Brown
The first WM8958 revision requires similar treatment. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-10Merge branch 'for-2.6.38' into for-2.6.39Mark Brown
2011-03-09ASoC: Ensure WM8958 gets all WM8994 late revision widgetsMark Brown
Without this fix the driver won't instantiate properly on relevant devices. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Cc: stable@kernel.org
2011-03-09ASoC: Fix typo in late revision WM8994 DAC2R nameMark Brown
Without this fix the driver won't instantiate properly on relevant devices. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Cc: stable@kernel.org
2011-03-01ASoC: WM8994: Ensure MICBIAS is provided with a clockDimitris Papastamos
The patch 'ASoC: WM8994: Improve Playback Robustness' did not handle this case properly. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-02-12 02:48:49 +0000