summaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs
AgeCommit message (Collapse)Author
2011-07-22Merge branch 'topic/asoc' into for-linusTakashi Iwai
2011-07-17Merge branch 'for-3.0' into for-3.1Mark Brown
2011-07-17ASoC: Correct WM8994 MICBIAS supply widget hookupMark Brown
The WM8994 and WM8958 series of devices have two MICBIAS supplies rather than one, the current widget actually manages the microphone detection control register bit (which is managed separately by the relevant API). Fix this, hooking the relevant supplies up to the MICBIAS1 and MICBIAS2 widgets. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-07-17ASoC: Reduce power consumption for idle DAIs in WM8994Mark Brown
If DAIs are idle but their clocks are in use for some reason (eg, as SYSCLK or for accessory detect) then set the clock dividers to the maximum to reduce slightly the power consumption of the unclocked circuits. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-17ASoC: Report an error for unknown adav80x formatsMark Brown
Not only fixes error handling but also some uninitialized variable warnings. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de>
2011-07-17ASoC: Handle failed WM8994 FLL lock waitsMark Brown
Try the completion before we start the FLL so that if an interrupt was delayed long enough for us to miss it we don't wait for the completion it signalled. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-15ASoC: Handle spurious wm_hubs DC servo done interruptsMark Brown
Don't assume the first fire indicates that we're done. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-15ASoC: WM8983: Initial driverDimitris Papastamos
The WM8983 is a low power, high quality stereo CODEC designed for portable multimedia applications. Highly flexible analogue mixing functions enable new application features, combining hi-fi quality audio with voice communication. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-15Merge branch 'for-3.0' into for-3.1Mark Brown
2011-07-15ASoC: Fix shift in WM8958 accessory detection default implementationMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-07-14ASoC: wm8900: fix a memory leak if wm8900_set_fll failsAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-14ASoC: Log WM8994 FIFO errors from the interruptMark Brown
We should spot them anyway on state changes but logging them gives us better time information about when the misconfiguration happened. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-14ASoC: Don't warn on low WM8994/58 AIFnCLKsMark Brown
We can have valid but very low clocks in accessory detection modes. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-14ASoC: Use WM8994 FLL lock interruptMark Brown
If we have interrupts then wait for the FLL lock interrupt rather than using dead reckoning when waiting for the FLL to start. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-14ASoC: Hook up DC servo completion IRQ for WM8994 and WM8958Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-14ASoC: Implement DC servo completion IRQ handling for wm_hubs devicesMark Brown
The individual devices should set the flag dcs_done_irq in the hubs shared data structure to indicate that they will flag the interrupt by calling wm_hubs_dcs_done(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-14ASoC: Use late enable handling for direct voice, speaker and headphoneMark Brown
This ensures appropriate clocking for bypass paths to speaker and headphone and direct voice paths on affected revisions. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-14ASoC: STA32x: Preserve reserved register bitsJohannes Stezenbach
Chip documentation explicitly requires that the reset values of reserved register bits are left untouched. It is possible there are differences between STA326 and STA328 or future chip revisions in these bits, and clobbering them might cause malfunction. Signed-off-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-14ASoC: STA32x: Add mixer controls for biquad coefficientsJohannes Stezenbach
The STA32x has a number of preset EQ settings, but also allows full user control of the biquad filter coeffcients (when "Automode EQ" is set to "User"). Each biquad has five signed, 24bit, fixed-point coefficients representing the range -1...1. The five biquad coefficients can be uploaded in one atomic operation into on-chip coefficient RAM. There are also a few prescale, postscale and mixing coefficients, in the same numeric format and range (a negative coefficient inverts phase). These coefficients are made available as SNDRV_CTL_ELEM_TYPE_BYTES mixer controls. Signed-off-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-09ASoC: Conditionalize the enable of WM8994 ADC TDM modeMark Brown
Future devices will not benefit from this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-07-09Merge branch 'topic/asoc' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 into for-3.1
2011-07-09Merge branch 'fix/asoc' into for-linusTakashi Iwai
2011-07-09Merge branch 'for-3.1' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into topic/asoc
2011-07-09Merge branch 'for-3.0' into for-3.1Mark Brown
2011-07-09Merge branch 'for-3.0' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into fix/asoc
2011-07-07Merge branch 'for-3.0' into for-3.1Mark Brown
2011-07-07ASoC: ak4642: fixup snd_soc_update_bits mask for PW_MGMT2Kuninori Morimoto
mask didn't cover update-data Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-07-05ASoC: Manage WM8731 ACTIVE bit as a supply widgetMark Brown
Now we have supply widgets there's no need to open code the handling of the ACTIVE bit. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-07-05ASoC: Manage WM8731 ACTIVE bit as a supply widgetMark Brown
Now we have supply widgets there's no need to open code the handling of the ACTIVE bit. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-07-05Merge branch 'for-3.1' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into topic/asoc
2011-07-05Merge branch 'for-3.0' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into fix/asoc
2011-07-05Merge branch 'for-3.1' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into topic/asoc
2011-07-05Merge branch 'for-3.0' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into fix/asoc
2011-07-04ASoC: tlv320aic3x: Add correct hw registers to Line1 cross connect muxesJarkko Nikula
Commit af46800 ("ASoC: Implement mux control sharing") revealed that "Left Line1[L | R] Mux" and "Right Line1[L | R] Mux" widgets were pointing to the same kcontrols and codec registers and thus soc-core falsely detected them as shared controls. This is actually wrong since there are separate registers in hardware that configure Line1L to RADC and Line1R to LADC cross connects so these muxes should not be shared. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2011-07-04Merge branch 'for-3.0' into for-3.1Mark Brown
2011-07-04ASoC: Ensure we delay long enough for WM8994 FLL to lock when startingMark Brown
This delay is very conservative. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Cc: stable@kernel.org
2011-06-29ASoC: Change WM9081 speaker output enable to _OUT_DRVMark Brown
More for neatness than any actual performance improvement. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-06-29ASoC: Correct left/right swap in wm_hubs DC offset correctionMark Brown
It was consistently wrong for everything except WM8993 so should be no functional change. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.comm>
2011-06-28ASoC: Add ADAV80x codec driverLars-Peter Clausen
This patch adds support for the Analog Devices ADAV801 and ADAV803 audio codec. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-24ALSA: Remove unneeded version.h includes from sound/Jesper Juhl
In the sound/ directory there are two files (flagged by 'make versioncheck'); sound/pci/asihpi/asihpi.c and sound/soc/codecs/wm8991.c that include linux/version.h although they don't need it. This patch removes the unneeded includes. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-23ASoC: Add basic WM8918 supportMark Brown
The WM8918 is register compatible with the WM8904 with a subset of the functionality. Add the device ID, a subsequent patch will ensure that only the relevant functionality is exported to userspace. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-06-23ASoC: Allow suppression of series updates on wm_hubs devicesMark Brown
Some devices do not support manual updates of the DC servo. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-06-23ASoC: Trigger wm_hubs series update startup off a separate flagMark Brown
Allowing the two to be used independently. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-06-22ASoC: add WM8782 ADC Codec DriverJohannes Stezenbach
Signed-off-by: Johannes Stezenbach <js@sig21.net> [zonque@gmail.com: transform to new ASoC structure] Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-22ASoC: add STA32X codec driverJohannes Stezenbach
Signed-off-by: Johannes Stezenbach <js@sig21.net> [zonque@gmail.com: transform to new ASoC structure] Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-22ASoC: codecs: Max98095: Fix logging of hardware revision.Taylor Hutt
The base hardware revision of the Maxim 98095 part is 0x40; the code which outputs the revision of the hardware has been updated to properly use uppercase alphabetic values for the revision numbers. Also, the use of a constant for the length 'max98095_dai' has been replaced with ARRAY_SIZE(). Signed-off-by: Taylor Hutt <thutt@chromium.org> Acked-by: Peter Hsiang <peter.hsiang@maxim-ic.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-20ASoC: adau1701: signedness bug in adau1701_write()Dan Carpenter
"ret" is supposed to be signed here. The current code will only return -EIO on error, instead of a more appropriate error code such as -EAGAIN etc. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-18ASoC: Remove adau1701 from SND_SOC_ALL_CODECS due to Sigma dependencyMark Brown
The Sigma code is in drivers/firmware which is only included on a very small subset of architectures and so ends up breaking the build on others. There's a pending patch to make the directory build as standard but it's not merged yet. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-16ASoC: AD1836: rename suspend/resume funcsBarry Song
Use less specific names for suspend/resume to match the probe/remove funcs where these are now used. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Scott Jiang <scott.jiang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-16ASoC: AD1836: fix codec nameMike Frysinger
The codec name should not have a "-codec" suffix since this is not part of a MFD. This was incorrectly changed during the multi-component updated. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-01 23:00:05 +0000