summaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs
AgeCommit message (Collapse)Author
2011-07-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (22 commits) ALSA: hda - Cirrus Logic CS421x support ALSA: Make pcm.h self-contained ALSA: hda - Allow codec-specific set_power_state ops ALSA: hda - Add post_suspend patch ops ALSA: hda - Make CONFIG_SND_HDA_POWER_SAVE depending on CONFIG_PM ALSA: hda - Make sure mute led reflects master mute state ALSA: hda - Fix invalid mute led state on resume of IDT codecs ASoC: Revert "ASoC: SAMSUNG: Add I2S0 internal dma driver" ALSA: hda - Add support of the 4 internal speakers on certain HP laptops ALSA: Make snd_pcm_debug_name usable outside pcm_lib ALSA: hda - Fix DAC filling for multi-connection pins in Realtek parser ASoC: dapm - Add methods to retrieve snd_card and soc_card from dapm context. ASoC: SAMSUNG: Add I2S0 internal dma driver ASoC: SAMSUNG: Modify I2S driver to support idma ASoC: davinci: add missing break statement ASoC: davinci: fix codec start and stop functions ASoC: dapm - add DAPM macro for external enum widgets ASoC: Acknowledge WM8962 interrupts before acting on them ASoC: sgtl5000: guide user when regulator support is needed ASoC: sgtl5000: refactor registering internal ldo ...
2011-07-26Merge branch 'next/devel2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'next/devel2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (47 commits) OMAP: Add debugfs node to show the summary of all clocks OMAP2+: hwmod: Follow the recommended PRCM module enable sequence OMAP2+: clock: allow per-SoC clock init code to prevent clockdomain calls from clock code OMAP2+: clockdomain: Add per clkdm lock to prevent concurrent state programming OMAP2+: PM: idle clkdms only if already in idle OMAP2+: clockdomain: add clkdm_in_hwsup() OMAP2+: clockdomain: Add 2 APIs to control clockdomain from hwmod framework OMAP: clockdomain: Remove redundant call to pwrdm_wait_transition() OMAP4: hwmod: Introduce the module control in hwmod control OMAP4: cm: Add two new APIs for modulemode control OMAP4: hwmod data: Add modulemode entry in omap_hwmod structure OMAP4: hwmod data: Add PRM context register offset OMAP4: prm: Remove deprecated functions OMAP4: prm: Replace warm reset API with the offset based version OMAP4: hwmod: Replace RSTCTRL absolute address with offset macros OMAP: hwmod: Wait the idle status to be disabled OMAP4: hwmod: Replace CLKCTRL absolute address with offset macros OMAP2+: hwmod: Init clkdm field at boot time OMAP4: hwmod data: Add clock domain attribute OMAP4: clock data: Add missing divider selection for auxclks ...
2011-07-26Merge branch 'fix/asoc' into for-linusTakashi Iwai
2011-07-22Merge branch 'topic/asoc' into for-linusTakashi Iwai
2011-07-20ASoC: Acknowledge WM8962 interrupts before acting on themMark Brown
This closes the small race between a status being read in response to an interrupt and clearing the interrupt, meaning that if the status changes between those periods we might not get a reassertion of the interrupt. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-07-19ASoC: sgtl5000: guide user when regulator support is neededWolfram Sang
Print a hint when the user has a setup where CONFIG_REGULATOR is really needed to make the driver work. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Dong Aisheng <b29396@freescale.com> Tested-by: Shawn Guo <shawn.guo@freescale.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-19ASoC: sgtl5000: refactor registering internal ldoWolfram Sang
The code for registering the internal ldo was present twice. Turn it into a function instead. Also, inform the user if LDO is used now. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Dong Aisheng <b29396@freescale.com> Tested-by: Shawn Guo <shawn.guo@freescale.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-17Merge branches 'omap/prcm' and 'omap/mfd' of ↵Arnd Bergmann
git+ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc into next/devel-2
2011-07-17Merge branch 'for-3.0' into for-3.1Mark Brown
2011-07-17ASoC: Correct WM8994 MICBIAS supply widget hookupMark Brown
The WM8994 and WM8958 series of devices have two MICBIAS supplies rather than one, the current widget actually manages the microphone detection control register bit (which is managed separately by the relevant API). Fix this, hooking the relevant supplies up to the MICBIAS1 and MICBIAS2 widgets. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-07-17ASoC: Reduce power consumption for idle DAIs in WM8994Mark Brown
If DAIs are idle but their clocks are in use for some reason (eg, as SYSCLK or for accessory detect) then set the clock dividers to the maximum to reduce slightly the power consumption of the unclocked circuits. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-17ASoC: Report an error for unknown adav80x formatsMark Brown
Not only fixes error handling but also some uninitialized variable warnings. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de>
2011-07-17ASoC: Handle failed WM8994 FLL lock waitsMark Brown
Try the completion before we start the FLL so that if an interrupt was delayed long enough for us to miss it we don't wait for the completion it signalled. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-15ASoC: Handle spurious wm_hubs DC servo done interruptsMark Brown
Don't assume the first fire indicates that we're done. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-15ASoC: WM8983: Initial driverDimitris Papastamos
The WM8983 is a low power, high quality stereo CODEC designed for portable multimedia applications. Highly flexible analogue mixing functions enable new application features, combining hi-fi quality audio with voice communication. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-15Merge branch 'for-3.0' into for-3.1Mark Brown
2011-07-15ASoC: Fix shift in WM8958 accessory detection default implementationMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-07-14ASoC: wm8900: fix a memory leak if wm8900_set_fll failsAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-14ASoC: Log WM8994 FIFO errors from the interruptMark Brown
We should spot them anyway on state changes but logging them gives us better time information about when the misconfiguration happened. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-14ASoC: Don't warn on low WM8994/58 AIFnCLKsMark Brown
We can have valid but very low clocks in accessory detection modes. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-14ASoC: Use WM8994 FLL lock interruptMark Brown
If we have interrupts then wait for the FLL lock interrupt rather than using dead reckoning when waiting for the FLL to start. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-14ASoC: Hook up DC servo completion IRQ for WM8994 and WM8958Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-14ASoC: Implement DC servo completion IRQ handling for wm_hubs devicesMark Brown
The individual devices should set the flag dcs_done_irq in the hubs shared data structure to indicate that they will flag the interrupt by calling wm_hubs_dcs_done(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-14ASoC: Use late enable handling for direct voice, speaker and headphoneMark Brown
This ensures appropriate clocking for bypass paths to speaker and headphone and direct voice paths on affected revisions. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-14ASoC: STA32x: Preserve reserved register bitsJohannes Stezenbach
Chip documentation explicitly requires that the reset values of reserved register bits are left untouched. It is possible there are differences between STA326 and STA328 or future chip revisions in these bits, and clobbering them might cause malfunction. Signed-off-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-14ASoC: STA32x: Add mixer controls for biquad coefficientsJohannes Stezenbach
The STA32x has a number of preset EQ settings, but also allows full user control of the biquad filter coeffcients (when "Automode EQ" is set to "User"). Each biquad has five signed, 24bit, fixed-point coefficients representing the range -1...1. The five biquad coefficients can be uploaded in one atomic operation into on-chip coefficient RAM. There are also a few prescale, postscale and mixing coefficients, in the same numeric format and range (a negative coefficient inverts phase). These coefficients are made available as SNDRV_CTL_ELEM_TYPE_BYTES mixer controls. Signed-off-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-09ASoC: Conditionalize the enable of WM8994 ADC TDM modeMark Brown
Future devices will not benefit from this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-07-09Merge branch 'topic/asoc' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 into for-3.1
2011-07-09Merge branch 'fix/asoc' into for-linusTakashi Iwai
2011-07-09Merge branch 'for-3.1' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into topic/asoc
2011-07-09Merge branch 'for-3.0' into for-3.1Mark Brown
2011-07-09Merge branch 'for-3.0' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into fix/asoc
2011-07-07Merge branch 'for-3.0' into for-3.1Mark Brown
2011-07-07ASoC: ak4642: fixup snd_soc_update_bits mask for PW_MGMT2Kuninori Morimoto
mask didn't cover update-data Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-07-07ASoC: twl6040: Add back support for legacy modePeter Ujfalusi
The legacy mode has been accidentaly removed by commit: ASoC: twl6040: add all ABE DAIs Add back the twl6040-hifi dai. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-07ASoC: twl6040: No need to convert the PLL IDPeter Ujfalusi
Since the PLL handling has been simplified, and rebased on 0, there is no longer need for converting the PLL ID. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-07ASoC: twl6040: Configure PLL only oncePeter Ujfalusi
Avoid configuring the PLL several times during audio startup. We can configure the PLL at prepare time with parameters collected earlier hw_param, and set_dai_sysclk calls. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-07ASoC: twl6040: Simplify sample rate constraint handlingPeter Ujfalusi
We can manage the sample rate constraints without the need to maintain a variable and a pointer. This simplifies the handling of the constraint, and makes it more robust. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-07ASoC: twl6040: Move PLL selection to codec driverPeter Ujfalusi
It is better if the selection between the Low power, and High performance PLL is handled within the codec driver, not in machine driver(s) to avoid duplicated code, and also to have consistent tracking of the selected PLL, and the resulting differences in supported sample rates. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-07ASoC: twl6040: Use neutral name for power mode text/enumPeter Ujfalusi
Change the variable names to be neutral (not refering to HS). This will ease up the introduction of PLL selection, which going to use the same enum strings. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-07ASoC: twl6040: Do not use wrapper for irq requestPeter Ujfalusi
The twl6040_request_irq/free_irq inline functions are going to be removed, so replace them with direct calls. The irq number is provided by the core driver via resource. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-05ASoC: Manage WM8731 ACTIVE bit as a supply widgetMark Brown
Now we have supply widgets there's no need to open code the handling of the ACTIVE bit. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-07-05ASoC: Manage WM8731 ACTIVE bit as a supply widgetMark Brown
Now we have supply widgets there's no need to open code the handling of the ACTIVE bit. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-07-05Merge branch 'for-3.1' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into topic/asoc
2011-07-05Merge branch 'for-3.0' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into fix/asoc
2011-07-05Merge branch 'for-3.1' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into topic/asoc
2011-07-05Merge branch 'for-3.0' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into fix/asoc
2011-07-04ASoC: tlv320aic3x: Add correct hw registers to Line1 cross connect muxesJarkko Nikula
Commit af46800 ("ASoC: Implement mux control sharing") revealed that "Left Line1[L | R] Mux" and "Right Line1[L | R] Mux" widgets were pointing to the same kcontrols and codec registers and thus soc-core falsely detected them as shared controls. This is actually wrong since there are separate registers in hardware that configure Line1L to RADC and Line1R to LADC cross connects so these muxes should not be shared. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2011-07-04ASoC: twl6040: Configure ramp step based on platformAxel Castaneda Gonzalez
Enable ramp down/up step to be configured based on platform. Signed-off-by: Axel Castaneda Gonzalez <x0055901@ti.com> Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-04ASoC: twl6040: set default constraints.Liam Girdwood
Set default sysclk constraints to high performance mode. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-01-20 05:43:51 +0000