summaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs
AgeCommit message (Collapse)Author
2009-12-23ASoC: Do not write to invalid registers on the wm9712.Eric Millbrandt
This patch fixes a bug where "virtual" registers were being written to the ac97 bus. This was causing unrelated registers to become corrupted (headphone 0x04, touchscreen 0x78, etc). This patch duplicates protection that was included in the wm9713 driver. Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2009-12-18ASoC: wm8974: fix a wrong bit definitionGuennadi Liakhovetski
The wm8974 datasheet defines BUFIOEN as bit 2. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2009-12-16ASoC: Fix disable of SPDIF on STAC9766 codecJon Smirl
Change code so that switching to playing music through the analog output disables SPDIF out instead of disabling it when stream ends. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-15ASoC: ak4642: Add default return value in ak4642_modinitKuninori Morimoto
If ak4642 driver was compiled without I2C configs, ak4642_modinit return value will become un-stable. This patch modify this bug Reported-by: Magnus Damm <damm@opensource.se> Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-14ASoC: Correct code taking the size of a pointerJulia Lawall
sizeof(codec->reg_cache) is just the size of the pointer. Elsewhere in the file, codec->reg_cache is used with sizeof(wm8900_reg_defaults), so the code is changed to do the same here. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression *x; expression f; type T; @@ *f(...,(T)x,...) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04ASoC: Rename controls with a / in wm_hubsJoonyoung Shim
This renames from a character / to : of controls. A / occurs below error messages. ASoC: Failed to create IN2RP/VXRP debugfs file ASoC: Failed to create IN2LP/VXRN debugfs file Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-27Merge branch 'for-2.6.32' into for-2.6.33Mark Brown
2009-11-27ASoC: AIC23: Fixing infinite loop in resume pathAnuj Aggarwal
This patch fixes two issues: a) Infinite loop in resume function b) Writes to non-existing registers in resume function Cc: stable@kernel.org Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-27ASoC: Revert missing reset_err in wm97*.cTakashi Iwai
The commit fe3e78e073d25308756f38019956061153267769 ASoC: Factor out snd_soc_init_card() removed the error paths that are still valid for wm97* codecs, causing the compile errors like sound/soc/codecs/wm9705.c:399: error: label 'reset_err' used but not defined sound/soc/codecs/wm9712.c:687: error: label 'reset_err' used but not defined sound/soc/codecs/wm9713.c:1237: error: label 'reset_err' used but not defined Revert the removed error path codes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-26ASoC: tlv320dac33: Change RT wq to singlethread wqPeter Ujfalusi
RT workqueue is going away in the near future, replace it with singlethread wq for now, which is still supported. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-20Merge branch 'ads117x' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into for-2.6.33
2009-11-18Merge branch 'for-2.6.32' into for-2.6.33Mark Brown
2009-11-18ASoC: tlv320aic23 fix rate selectionTroy Kisky
Fix the ordering of sr_valid_mask array. The lower bit of the index represents USB not bosr. Reported-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-12ASoC: Remove redundant snd_soc_dapm_new_widgets() callsMark Brown
The DAPM widgets are now insntantiated by the core when creating the card so there is no need for the individual CODEC drivers to do so. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-10ASoC: TWL4030: Do not modify the APLL_CTL registerPeter Ujfalusi
APLL_CTL register is configured by the twl4030-codec MFD driver. Remove code, which makes changes in the APLL_CTL register, and replace those with checks against the configured audio_mclk configuration done in the MFD driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-07ASoC: Remove dead code and labelsTakashi Iwai
Remove the dead code and labels "card_err" in the error paths of some codec drivers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-04ASoC: Update ads117x to current APIsMark Brown
Probe as a platform driver (ads117x) and remove the call to snd_soc_init_card(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-04ASoC: ADS117x ADC driverGraeme Gregory
This patch adds support for the TI ADS117x family of multichannel ADCs and was sponsored by Shotspotter Inc. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-03ASoC: Factor out snd_soc_init_card()Mark Brown
snd_soc_init_card() is always called as the last part of the CODEC probe function so we can factor it out into the core card setup rather than have each CODEC replicate the code to do the initialiastation. This will be required to support multiple CODECs per card. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-03ASoC: Staticise wm8727 driver structureMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-02ASoC: TWL4030: Make sure, that the codec is powered on startupPeter Ujfalusi
Set the codec->bias_level to SND_SOC_BIAS_OFF before changing the initial bias level to STANDBY. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-02ASoC: Add support for the WM8727 DAC.Neil Jones
Add support for the Wolfson Microelectronics WM8727 DAC, this is a simple non-configurable DAC. Signed-off-by: Neil Jones <neil.jones@imgtec.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-29ASoC: TWL4030: Add APLL supply for the capture pathPeter Ujfalusi
Capture path also need the APLL enabled, adding DAPM_SUPPLY for the Virtual ADCs. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-29ASoC: TWL4030: Change APLL powering sequencePeter Ujfalusi
It seams that certain part of the twl4030 codec needs the APLL enabled before they are enabled. Paths which has any digital processing needs need the APLL enabled before they can function. For example the vibra output will have some random data after it is enabled and before the APLL also enabled. If only analog components are in use (analog bypass), than it seams, that the APLL does not need to be enabled. This lowers the power consumption with around ~0.005A. Adding DAPM_SUPPLY to the Digital playback route and also to the capture route to enable and disable the APLL. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-29ASoC: TWL4030: Vibra motor stop fix when it is driven with audioJari Vanhala
This patch fixes vibrator playing incoherently, when driven with audio. There is something wrong in switch 3 at H-bridge and VIBRA_SET still affects PWM generator. Slowest value fixes things. Signed-off-by: Jari Vanhala <ext-jari.vanhala@nokia.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-29ASoC: CS4270: export de-emphasis filter as ALSA controlDaniel Mack
The CS4270 codec features an de-emphasis filter for compensation of audio material filtered by an 50/15 uS algorithm. Not sure whether we should always enable it for 44100Hz sampling frequency, but it should at least be configurable by the user. Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-28ASoC: TWL4030: Change codec_muted to apll_enabledPeter Ujfalusi
codec_muted is missleading, change it to apll_enabled, which is what it is doing: enabing and disabling the APLL. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-28ASoC: TWL4030: Remove bypass trackingPeter Ujfalusi
Since ASoC core now handling the codec bias differently there is no need to do the tracking of bypass switch states anymore. Handling of the common bit for analog loopbacks is done with DAPM_SUPPLY for the bypass paths. Now this bit is only enabled when there is a complete analog bypass path, compared to the previous implementation, when the global switch was enabled if there were any of the analog bypass switch was on (regardless if there were complete path or not) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-26ASoC: Add regulator support for WM8731Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-25ASoC: TWL4030: Driver registration via twl4030_codec MFDPeter Ujfalusi
Change the way how the twl4030 soc codec driver is loaded/probed. Use the device probing via tlw4030_codec MFD device. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-25ASoC: TWL4030: use the twl4030-codec.h for register descriptionsPeter Ujfalusi
Remove the register descriptions from the twl4030.h file and use the linux/mfd/twl4030-codec.h instead, which has the codec related register descriptions also. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-21ASoC: tlv320dac33: typo fix in the headerPeter Ujfalusi
Fix the definition of DAC33_LTM field, the LTM bits in FIFO_IRQ_MODE_B register are starting at bit 6. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-19ASoC: TWL4030: Only update the needed bits in *set_dai_sysclkPeter Ujfalusi
Do not rewrite the whole register, but only update the needed bits in set_dai_sysclk functions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15ASoC: Codec driver for Texas Instruments tlv320dac33 codecPeter Ujfalusi
Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15ASoC: Remove snd_soc_suspend_device()Mark Brown
The PM core will grow pm_link infrastructure in 2.6.33 which can be used to implement the intended functionality of the ASoC-specific device suspend and resume callbacks so drop them. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-12ASoC: TPA6130A2: Make tpa6130a2_power as staticPeter Ujfalusi
The power for the amplifier should be handled internally by the tpa6130a2 driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-09ASoC: Minor fixups to tpa6130a2 driverMark Brown
- Staticise ttpa6130a2_client. - Remove unneeded cast from void. - Use explict NULL rather than 0. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-09ASoC: TPA6130A2 amplifier driverPeter Ujfalusi
Driver for Texas Instruments TPA6130A2 stereo headphone amplifier. The driver provides playback gain control and also pre-defined DAPM_HP widgets and DAPM routings for power management. The DAPM_HP widget names are: "TPA6130A2 Headphone Left" "TPA6130A2 Headphone Right" From soc machine drivers to use with the tpa6130a2 amplifier, the tpa6130a2_add_controls has to be called, which adds the alsa controls and the DAPM routing needed for the tpa6130a2. After that the machine driver can connect the codec's output with 'TPA6130A2 Left' and 'TPA6130A2 Right': {"TPA6130A2 Left", NULL, "CODEC LEFT OUT"}, {"TPA6130A2 Right", NULL, "CODEC RIGHT OUT"}, Internally the left and right channels are powered separately. When none of the channels are needed the amplifier is powered down: hard power: valid GPIO number is passed within platform data soft power: Using the software shutdown of the amplifier Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-08Merge branch 'for-2.6.32' into for-2.6.33Mark Brown
2009-10-06Merge branch 'upstream/wm8350' into for-2.6.32Mark Brown
2009-10-06ASoC: WM8350 capture PGA mutes are invertedMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2009-10-06Merge branch 'for-2.6.32' into for-2.6.33Mark Brown
2009-10-06Merge branch 'for-2.6.32' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into for-2.6.32
2009-10-05Merge branch 'for-2.6.32' into for-2.6.33Mark Brown
2009-10-02ASoC: wm8940: Fix check on error code form snd_soc_codec_set_cache_ioJonathan Cameron
Fix for typo in commit 8d50e447d19fec64adebeef55f2b60d695435412 ASoC: Factor out I/O for Wolfson 8 bit data 16 bit register CODECs Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-01Merge remote branch 'takashi/topic/asoc' into for-2.6.33Mark Brown
2009-10-01ASoC: Fix build errors of wm8711.c with SPITakashi Iwai
Fix a couple of typos and a missing header file inclusion to build wm8711.c properly with CONFIG_SPI_MASTER. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-30ASoC: Factor out analogue platform data from WM8993Mark Brown
This is also shared with newer CODECs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-30Merge branch 'upstream/wm8974' into for-2.6.33Mark Brown
2009-09-30ASoC: Clean up WM8974 PLL configurationMark Brown
Don't use a static for WM8974 PLL factors - we don't support more than one device so it won't happen but no sense in leaving the race condition hanging around. Also, pre_div is a single bit and it's a bit simpler if we move the handling of the factor of 4 in the output into the coefficient setup. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-02 12:20:24 +0000