summaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs
AgeCommit message (Collapse)Author
2010-11-03ASoC: Use pm_wakeup_event() in WM8962 jack detectionMark Brown
Ensure that the system does not suspend while we process a WM8962 jack event by using pm_wakeup_event() to block the suspend while we're waiting for the jack to settle. Use a slightly longer timeout than the jack waits to allow for other stuff to take over and delays in scheduling. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-03ASoC: Remove register write trace from WM8994Mark Brown
We now have trace in the ASoC core so we don't need to our own trace in the driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-03ASoC: Check return value of strict_strtoul() in WM8962Mark Brown
strict_strtoul() has been made __must_check so do so. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-03ASoC: tpa6130a2: Get rid of compile warning from tpa6130a2_powerJarkko Nikula
Patch "ASoC: tpa6130a2: Fix unbalanced regulator disables" introduced a compiler warning "‘ret’ may be used uninitialized in this function". Initialize ret to zero to get rid of it and making sure that the function does not return any random error code when the code is falling through. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-03ASoC: tlv320aic3x: Add support to shared common reset lineJarkko Nikula
This is aimed to configurations where multiple aic3x codecs share the same reset line and are powered from same supply voltages. Currently aic3x_probe will fail if trying to request already requested gpio_reset and passing -1 to another aic3x instances cause that those instances cannot release reset in aic3x_set_power. That is, another instances can work only if primary aic3x instance is powered and reset is released. Solve this by implementing a list of probed instances that is used for checking if other instance shares the same gpio_reset number. If a shared reset line exists, then only first instance tries to request and configure it and the last instance releases it. Runtime modifications are not needed since aic3x_regulator_event with help of regulator framework takes already care that reset is pulled down only when some or all supplies are disabled meaning that all instances using them are idle. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-03ASoC: tlv320aic3x: Use gpio_is_valid in checking for valid gpio_resetJarkko Nikula
I promised to convert this at some point. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-03Merge remote branch 'tiwai/topic/asoc' into for-2.6.38Liam Girdwood
2010-11-03Merge commit 'v2.6.37-rc1' into for-2.6.38Liam Girdwood
2010-11-03Merge branch 'for-2.6.37' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into fix/asoc
2010-11-02Merge branch 'for-2.6.37' into HEADMark Brown
WARN() fix from Joe moved. Conflicts: sound/soc/codecs/wm_hubs.c
2010-11-01ASoC: Update WARN uses in wm_hubsJoe Perches
Add missing newlines. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-01tree-wide: fix comment/printk typosUwe Kleine-König
"gadget", "through", "command", "maintain", "maintain", "controller", "address", "between", "initiali[zs]e", "instead", "function", "select", "already", "equal", "access", "management", "hierarchy", "registration", "interest", "relative", "memory", "offset", "already", Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-01ASoC: Fix SND_SOC_ALL_CODECS typo for alc5623Jarkko Nikula
Include alc5623.c in SND_SOC_ALL_CODECS when dependencies are met. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-01Merge branch 'for-2.6.37' into for-2.6.38Mark Brown
2010-11-01ASoC: Include cx20442 to SND_SOC_ALL_CODECSJarkko Nikula
Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-01ASoC: Fix SND_SOC_ALL_CODECS typo for jz4740Jarkko Nikula
Include jz4740.c to SND_SOC_ALL_CODECS when the dependencies are met. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-01ASoC: Remove volatility from WM8900 POWER1 registerMark Brown
Not all bits can be read back from POWER1 so avoid corruption when using a read/modify/write cycle by marking it non-volatile - the only thing we read back from it is the chip revision which has diagnostic value only. We can re-add later but that's a more invasive change than is suitable for a bugfix. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
2010-10-30ASoC: tpa6130a2: Fix unbalanced regulator disablesJarkko Nikula
This driver has unbalanced regulator_disable when doing module loading and unloading. This is because tpa6130a2_probe followed by tpa6130a2_remove calls twice tpa6130a2_power(0). Fix this by implementing a state checking in tpa6130a2_power. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-30ASoC: tlv320dac33: Mode1 FIFO auto configuration fixPeter Ujfalusi
Do not allow invalid (too big) nSample value, when FIFO Mode1 and automatic fifo configuration has been selected. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-30ASoC: tlv320dac33: Limit the US_TO_SAMPLES macroPeter Ujfalusi
Limit the time window to maximum 1s in the macro. The driver deals with much shorter times (<200ms). This will fix a rare division by zero bug in Mode1. This could happen, when the work is not executed in time (within mode1_latency) after the interrupt. In this case the DAC33 will not receive the needed nSample command in time, and enters to an unknown state, and won't recover. In such event the time window will increase, and eventually going to be bigger than 1s, resulting devision by zero. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-30ASoC: tlv320dac33: Error handling for broken chipPeter Ujfalusi
Correct/Implement handling of broken chip. Fail the soc_prope if the communication with the chip fails (can not read chip ID). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-28ASoC: Store DC offset correction for wm_hubs devices in class W modeMark Brown
Providing the analogue configuration of the output path remains the same the DC offset corrected by the DC servo will remain identical so we can skip the callibration, reducing the startup time for the headphone output. Implement this for the wm_hubs devices as has been done for several other CODECs. Don't do this if we have any analogue paths enabled since offsets may be being introduced by the analogue paths which could vary outside the control of the driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-27ASoC: sound/wm9090: add missing __devexit markerArnaud Lacombe
This fixes the following warning: sound/soc/codecs/wm9090.c:668:12: warning: 'wm9090_i2c_remove' defined but not used Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-27ASoC: sound/max98088: add missing __devexit markerArnaud Lacombe
This fixes the following warning: sound/soc/codecs/max98088.c:2054:12: warning: 'max98088_i2c_remove' defined but not used Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-27ASoC: sound/ad73311: add missing __devexit markerArnaud Lacombe
This fixes the following warning: sound/soc/codecs/ad73311.c:50:12: warning: 'ad73311_remove' defined but not used Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-26ASoC: TWL4030: Use usleep_range when appropriatePeter Ujfalusi
Change the busy loop delays with usleep_range or msleep calls. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-23Merge branch 'for-2.6.37' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into topic/asoc
2010-10-23ASoC: tlv320dac33: Use usleep_range for delaysPeter Ujfalusi
Switch to use the more precise usleep_range instead of msleep(). Replace the udelay with usleep_range to remove the busy loop waiting. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Borwn <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-21ASoC: tpa6130a2: Error handling for broken chipPeter Ujfalusi
Correct/Implement handling of broken chip. Fail the i2c_prope if the communication with the chip fails. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-21ASoC: add support for alc562[123] codecsArnaud Patard (Rtp)
This patch is adding support for alc562[123] codecs. It's based on the source code available in HP source code and other places. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-21ASoC: max98088: Staticise m98088_eq_bandDimitris Papastamos
This function is not exported and it does not seem to be called from anywhere else therefore it should be static. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-19ASoC: WM8580: Remove useless assignmentJassi Brar
The variable is not used anyway. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-18ASoC: Restore MAX98088 CODEC driverMark Brown
This reverts commit f6765502f8daae3d237a394889276c8987f3e299 and adds the missing include file. Signed-off-by: Peter Hsiang <Peter.Hsiang@maxim-ic.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-18Revert "ASoC: Add max98088 CODEC driver"Mark Brown
This reverts commit e65d255a5a610ce9e185e0df855250706aca7c21 since it does not build.
2010-10-15ASoC: Add max98088 CODEC driverPeter Hsiang
This patch adds the MAX98088 CODEC driver. Signed-off-by: Peter Hsiang <peter.hsiang@maxim-ic.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-15ASoC: ak4642: make sure name of register/valueKuninori Morimoto
This patch replace magic code with defined name, and remove unnecessary settings which set default value Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-15ASoC: Remove unused vol field from WM8994 access mask tableJoe Perches
Remove unused vol from struct access_mask Reduces object size ~3kb. $ size sound/soc/codecs/wm8994.o* text data bss dec hex filename 40727 4384 4480 49591 c1b7 sound/soc/codecs/wm8994.o.new 43879 4384 4480 52743 ce07 sound/soc/codecs/wm8994.o.old Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-13ASoC: tlv320dac33: Control for line output gainPeter Ujfalusi
New control to select the line output gain. This gain control affects the linein-to-lineout and dac-to-loneout gain differently. Use enum type to select the desired gain combination. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-13ASoC: Restore DAI ID specification for WM8994Mark Brown
WM8994 relies on the DAIs having IDs that match the AIF numbers. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-13ASoC: Add WM8962 microphone bias controlMark Brown
We unconditionally require SYSCLK since while only microphone detection specifically requires SYSCLK any actual use case would enable it via some other means but microphone detection may have nothing active other than the bias itself. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-13ASoC: ac97: add MODULE_ALIAS for the platform driverMika Westerberg
So that modprobe can load the driver automatically when the platform device appears. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-13ASoC: ac97: don't call snd_soc_new_ac97_codec at probeMika Westerberg
It is not needed since snd_ac97_mixer() will create a new ac97 object for us. Removing the call also fixes a memory leak since codec->ac97 is set to NULL at the beginning of snd_ac97_mixer(). Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-12ASoC: ak4642: simultaneous playback/recorde supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-11ASoC: checking kzalloc() for IS_ERR() instead of NULLDan Carpenter
There is a typo here that got copy and pasted to several probe functions. kzalloc() returns NULL on allocation failures and not an ERR_PTR. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-11ASoC: Compress WM8962 register access mapMark Brown
Reduce the source code size still futher by only specifying non-zero rows in the WM8962 access map. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-11ASoC: Shrink code size for WM8962 register defaults tableMark Brown
Dramatically reduce the code size for the WM8962 register defaults table by switching to explicitly initialise only defined registers, relying on static defaulting to zero for the overwelming bulk of the register map. Similar treatement for the register access table will come later and will produce a similarly dramatic code size shrink. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-07ASoC: Staticise CS4270 DAIMark Brown
It's not needed with multi-component. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Acked-by: Timur Tabi <timur@freescale.com>
2010-10-07ASoC: Staticise AD1980 DAIMark Brown
It doesn't need to be exported with multi-component. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-05ASoC: WM8804: Retrieve the device revision and print itDimitris Papastamos
Be verbose and print out the device revision. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-04ASoC: WM8804: Power down the PLL correctlyDimitris Papastamos
The PLL is disabled when the corresponding bit is set not the other way around. This commit depends on my other commit with Subject "ASoC: WM8804: Refactor set_pll code to avoid GCC warnings". Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-06-27 03:01:49 +0000