summaryrefslogtreecommitdiffstats
path: root/sound/soc/imx
AgeCommit message (Collapse)Author
2010-04-17Merge branch 'for-2.6.34' into for-2.6.35Mark Brown
2010-04-16ASoC: imx-ssi: do not call hrtimer_disable in trigger functionSascha Hauer
Doing so causes a deadlock, so just signal the timer to stop using an atomic variable. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-04-15ASoC: imx-ssi: increase minimum periods to 4Sascha Hauer
Currently the notification of elapsed periods is not very exact. Increase minimum periods to 4 as suggested by Liam Girdwood. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-04-08ASoC: imx-ssi: Use a hrtimer in FIQ modeSascha Hauer
Using a regular timer results in poll times < 1 jiffie with small buffers, so we loaded the timer with the actual jiffie value. We can be more accurate using a hrtimer. Also, we have to call snd_pcm_period_elapsed after playing period_bytes and not runtime->period_size (which is in samples and not in bytes). Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-04-08ASoC: imx-pcm-dma-mx2: restart DMA after an errorSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-04-08ASoC: imx-ssi: honor IMX_SSI_DMA flagSascha Hauer
When checking if we are DMA capable we have to check for the IMX_SSI_DMA flag which is already set from platform_data instead of setting it again when we want to do DMA. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@Slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-04-05ALSA: ASoC: move dma_data from snd_soc_dai to snd_soc_pcm_streamDaniel Mack
This fixes a memory corruption when ASoC devices are used in full-duplex mode. Specifically for pxa-ssp code, where this pointer is dynamically allocated for each direction and destroyed upon each stream start. All other platforms are fixed blindly, I couldn't even compile-test them. Sorry for any breakage I may have caused. [Note that this is a backported version for 2.6.34. Upstream commit is fd23b7dee] Signed-off-by: Daniel Mack <daniel@caiaq.de> Reported-by: Sven Neumann <s.neumann@raumfeld.com> Reported-by: Michael Hirsch <m.hirsch@raumfeld.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-22Merge branch 'for-2.6.34' into for-2.6.35Mark Brown
2010-03-22ASoC: Move WM8350 microphone detection bias managment out of driverMark Brown
Allow machines to control exactly when the bias is turned on and off. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-22ASoC: Remove BROKEN from i.MX audio after dependencies mergedMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-19ASoC: move dma_data from snd_soc_dai to snd_soc_pcm_streamDaniel Mack
This fixes a memory corruption when ASoC devices are used in full-duplex mode. Specifically for pxa-ssp code, where this pointer is dynamically allocated for each direction and destroyed upon each stream start. All other platforms are fixed blindly, I couldn't even compile-test them. Sorry for any breakage I may have caused. Reported-by: Sven Neumann <s.neumann@raumfeld.com> Reported-by: Michael Hirsch <m.hirsch@raumfeld.com> Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-19ASoC: Hook up microphone jack detection on 1133-EV1 boardMark Brown
Note that since all the microphones share a bias there is a single jack exported for all three, even though there are two physical connectors plus the soldered down silicon mic. Note also that the SiMic is always present by default. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-19ASoC: Correct typoed Mic2 connections on 1133-EV1 boardMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-10Merge commit 'v2.6.34-rc1' into for-2.6.35Mark Brown
2010-03-03ASoC: Wolfson Microelectronics 1133-EV1 audio supportMark Brown
Initial support for audio using the 1133-EV1 audio and PMIC module for the i.MX31ADS. Currently only playback is supported, and the FIQ DMA driver has performance problems at higher sample rates which cause audible dropouts. This driver is based heavily on an out of tree one written by Liam Girdwood. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-02-25ASoC: Check progress when reporting periods from i.MX FIQ handlerMark Brown
Currently the i.MX FIQ handler is reporting periods as elapsed based purely on a timer running in the CPU. This means that any clock mismatch between the CPU and the audio subsystem can result in the status reported to applications drifting away from the actual status of the hardware. This is particularly likely at present since the SSI driver is only capable of operating in slave mode so it's very likely that the interface will be clocked from a different source. Instead check the offset reported by the FIQ and only notify when we have transferred at least one period, re-firing the timer if we didn't do so. Also factor out the calculation of the timer expiry time for make it a bit easier to experiment with. Note that this only improves the situation, problems can still be triggered. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-02-25ASoC: Remove a unused variables from i.MX FIQ runtime dataMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-02-10ASoC: Typo. s/Freecale/Freescale/Paul Menzel
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-02-10ASoC: add phycore-ac97 sound supportMark Brown
This patch adds sound support for Phytec PhyCORE / PhyCARD modules in AC97 mode. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-17ASoC: Mark new i.MX drivers as BROKEN until arch/arm mergedMark Brown
Currently they don't build due to cross tree dependencies, they will be reenabled once the arch/arm side has merged. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-17ASoC: Remove old i.MX driver codeMark Brown
This has been superceeded by Sascha's new driver but was not removed in the patch series due to cutdowns for review. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-17ASoC: i.MX SSI driver does not yet support master modeMark Brown
The clocks for the SSI block need handling before this can work. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-17ASoC: Convert new i.MX SSI driver to use static DAI arrayMark Brown
While dynamically allocated DAIs are the way forward the core doesn't yet support anything except matching with a pointer to the actual DAI so convert to doing that so that machine drivers don't have to jump through hoops to register themselves. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Javier Martin <javier.martin@vista-silicon.com>
2010-01-17ASoC: Fix i.MX audio build for i.MX3xMark Brown
Don't unconditionally include the i.MX2x DMA driver, the arch/arm functions it uses aren't available for i.MX3x. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Javier Martin <javier.martin@vista-silicon.com>
2010-01-17ASoC: Add a new imx-ssi sound driverSascha Hauer
The old driver has the number of SSI units in the system hardcoded, does not make use of the device model and works only on i.MX21/27. This driver replaces it. It works in DMA mode on i.MX21/27 and using an FIQ handler on other systems. It also supports AC97 mode of the SSI units. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-08ASoC: Wrong variable returned on errorRoel Kluin
The wrong variable was returned in the case of an error Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-08Merge branch 'for-2.6.32' into for-2.6.33Mark Brown
2009-10-06ASoC: Remove absent SYNC and TDM DAI format options from i.MX SSIMark Brown
These should be handled via set_tdm_slot() now and cause build failures as-is. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-05ASoC: Add source argument to PLL configurationMark Brown
More and more devices feature PLLs and FLLs with the ability to select between multiple input clocks. In order to better support these devices a new argument, source, has been added to the set_pll() configuration API. Using set_clkdiv() is often difficult due to the need to stop the PLL/FLL before any reconfiguration can be done. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-15ASoC: Staticise unexported variablesMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-15ASoC: Remove unneeded i.MX dependency on SNDMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-05ASoC: Fix review issues in i.MX2x PCM driverjavier Martin
Signed-off-by: javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-05ASoC: add machine driver for i.mx27_visstrim_m10 boardjavier Martin
This adds support for i.mx27_visstrim_sm10 board machine driver which uses an i.mx27 processor plus a wm8974 codec. It has been tested on a visstrim_sm10 board. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-05ASoC: add DAI platform ssi driver for MXCjavier Martin
This adds support for DAI platform for the SSI present in MXC platforms. It currently does not support i.MX3, the only thing necessary to do this is to export DMA data for i.MX3 interface which I haven't done because I don't have a i.MX3 based board available. It has been tested on i.MX27 board. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-05ASoC: add DMA platform driver for MX1x and MX2xjavier Martin
This adds support for DMA platform valid for i.MX1 and i.MX2 platforms. This is not valid for i.MX3 since it doesn't share the same DMA interface than i.MX1 and i.MX2. It has been tested on i.MX27 board. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-25 11:44:38 +0000