summaryrefslogtreecommitdiffstats
path: root/sound/soc/samsung
AgeCommit message (Collapse)Author
2011-01-11ASoC: SAMSUNG: Clean-up header includesSeungwhan Youn
This patch remove including unnecessary/duplicated headers which relative with Samsung SoCs. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-10ASoC: RX1950: Enable Mic Jack during glue driver initVasily Khoruzhick
Enable Mic Jack during glue driver init, otherwise capture will not work. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-10ASoC: SAMSUNG: Move PCM specific definitions into pcm.cSeungwhan Youn
This patch moves PCM specific definitions, they doesn't need to be shared, into 'pcm.c' from 'pcm.h'. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-10ASoC: SAMSUNG: Clean-up DMA header fileSeungwhan Youn
This patch moves DMA specific definitions, they doesn't need to be shared, into 'dma.c' from 'dma.h'. And remove unnecessery definitions on 'dma.h'. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-10ASoC: SAMSUNG: Remove AC97 header fileSeungwhan Youn
This patch moves AC97 specific definitions, they doesn't need to be shared, into 'ac97.c' from 'ac97.h'. This patch also remove header file, 'ac97.h', and remove includes on machine drivers. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-05ASoC: Remove needless inclusion of tlv320aic3x.h from machine driversJarkko Nikula
After multi-component conversion these machine drivers don't actually need anything from sound/soc/codecs/tlv320aic3x.h so don't include it. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-05ASoC: Change Samsung Kconfig from ASOC_ to SND_SOC_Mark Brown
The rest of ASoC is using SND_SOC_ as the prefix for all the Kconfig symbols so do so for the new Samsung drivers too, rather than using ASOC_ as they currently are. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-22ASoC: SAMSUNG: Debug wrong parameterSeungwhan Youn
snd_soc_jack_new()'s first parameter was changed from snd_soc_card to snd_soc_codec after Multi-Component support patches. So, this patch fixes parameter that we missed. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-20ASoC: SMDKV310: Add I2S supportJassi Brar
Add ASoC machine driver for SMDKV310/C210 boards that have a WM8994 attached to I2S-0. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-20ASoC: SMDKV310: Enable AC97 deviceJassi Brar
Enable AC97 audio device on SMDKV310/C210. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-20ASoC: SMDKC110: Enable I2S deviceJassi Brar
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-20ASoC: SMDKV210: Enable I2S deviceJassi Brar
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-20ASoC: SMDK6442: Enable I2S deviceJassi Brar
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-20ASoC: SMDK6450: Enable I2S deviceJassi Brar
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-20ASoC: SMDK6440: Enable I2S deviceJassi Brar
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-20ASoC: SMDK_WM8580: Make I2S0 as default daiJassi Brar
Since most newer SMDKs have I2S0 routed to the WM8580's Primary DAI, future changes can be minimized if the default CPU DAIs are set to 0, rather than 2. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-20ASoC: Samsung: I2S: Flush FIFO after stopJassi Brar
Flush the FIFO while stopping the channel rather than starting. This saves time during stream start and keeps the FIFOs clean when the channel is idling. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-20ASoC: Samsung: Set default rclk source rateJassi Brar
Since the rclk_srcrate is cleared upon startup, it should be initialized upon second and later 'open' calls to the device with same root-clock source. The bug is otherwise visible in Codec-Slave mode. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-10ASoC: Add HP iPAQ H1940 supportVasily Khoruzhick
Add glue driver to make s3c24xx-i2s and uda1380 produce some sound on H1940. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-06ASoC: SAMSUNG: Remove duplicated snd_card on smdk_spdifSeungwhan Youn
This patch remove duplicated snd_card defination on smdk_spdif. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-06ASoC: SAMSUNG: Fix initial return valueSeungwhan Youn
This patch fixed intial return value to be a '0' as asuccess on set_audio_clock_heirachy(). This avoids unintended error on initialize. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-29ASoC: Fix resource leak in smdk_spdif.cAxel Lin
Properly free allocated resources in smdk_init() error path. Add missing platform_device_unregister() in smdk_exit(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-29ASoC: Add missing gpio_free(S3C64XX_GPK(12)) in smartq_exit()Axel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-29ASoC: Fix resource leak in neo1973_gta02_init() error pathAxel Lin
Properly free allocated resources in neo1973_gta02_init() error path. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-29ASoC: Fix resource leak in goni_wm8994.cAxel Lin
Properly free allocated resources in goni_init() error path. Add missing snd_soc_unregister_dai() in goni_exit(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-25ASoC: Make SMDK WM8580 driver unloadableMark Brown
Supply a module exit function so that the driver can be unloaded. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-25ASoC: smdk_wm9713: fix resource leak in smdk_init error pathAxel Lin
Fix the error path to properly free allocated resources. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-25ASoC: Fix compile error for smartq_wm8987.cAxel Lin
Fix below compile error: CC sound/soc/samsung/smartq_wm8987.o sound/soc/samsung/smartq_wm8987.c: In function 'smartq_hifi_hw_params': sound/soc/samsung/smartq_wm8987.c:42: error: 'struct snd_soc_pcm_runtime' has no member named 'dai' sound/soc/samsung/smartq_wm8987.c:43: error: 'struct snd_soc_pcm_runtime' has no member named 'dai' sound/soc/samsung/smartq_wm8987.c: In function 'smartq_wm8987_init': sound/soc/samsung/smartq_wm8987.c:192: warning: passing argument 1 of 'snd_soc_jack_new' from incompatible pointer type sound/soc/samsung/smartq_wm8987.c: At top level: sound/soc/samsung/smartq_wm8987.c:216: warning: initialization from incompatible pointer type make[3]: *** [sound/soc/samsung/smartq_wm8987.o] Error 1 make[2]: *** [sound/soc/samsung] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-25ASoC: neo1973_gta02_wm8753: fix wrong parameter for snd_soc_register_dai and ↵Axel Lin
snd_soc_unregister_dai Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-23ASoC: Samsung: Rename from s3c24xx to samsungJassi Brar
Finally, move the 's3c24xx' directory to 'samsung' Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>