summaryrefslogtreecommitdiffstats
path: root/sound/soc/sh/fsi.c
AgeCommit message (Collapse)Author
2011-11-23ASoC: Constify snd_soc_dai_ops structsLars-Peter Clausen
Commit 1ee46ebd("ASoC: Make the DAI ops constant in the DAI structure") introduced the possibility to have constant DAI ops structures, yet this is barley used in both existing drivers and also new drivers being submitted, although none of them modifies its DAI ops structure. The later is not surprising since existing drivers are often used as templates for new drivers. So this patch just constifies all existing snd_soc_dai_ops structs to eliminate the issue altogether. The patch was generated with the following coccinelle semantic patch: // <smpl> @@ identifier ops; @@ -struct snd_soc_dai_ops ops = +const struct snd_soc_dai_ops ops = { ... }; // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08ASoC: fsi: add valid data position control supportKuninori Morimoto
FSI2 can control valid data position, like package in front/back or stream mode (16bit x 2). But current fsi driver is assuming it was in-back. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08ASoC: fsi: fixup compile warningKuninori Morimoto
This patch fixup below warning ${linux}/sound/soc/sh/fsi.c:442:3:\ warning: passing argument 1 of '__fsi_reg_read' makes pointer\ from integer without a cast ${linux}/sound/soc/sh/fsi.c:517:3: \ warning: passing argument 1 of '__fsi_reg_write' makes pointer\ from integer without a cast ${linux}/sound/soc/sh/fsi.c:663:3: \ warning: passing argument 1 of '__fsi_reg_mask_set' makes pointer\ from integer without a cast Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-31sound: Add module.h to the previously silent sound usersPaul Gortmaker
Lots of sound drivers were getting module.h via the implicit presence of it in <linux/device.h> but we are going to clean that up. So fix up those users now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-27Merge branch 'topic/asoc' into for-linusTakashi Iwai
2011-10-02ASoC: sh: use correct __iomem annotationsArnd Bergmann
This removes a few unnecessary type casts and avoids sparse warnings. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-22sound: irq: Remove IRQF_DISABLEDYong Zhang
Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-07ASoC: core - Optimise and refactor pcm_new() to pass only rtdLiam Girdwood
Currently pcm_new() passes in 3 arguments :- card, pcm and DAI. Refactor this to only pass in 1 argument (i.e. the rtd) since struct rtd contains card, pcm and DAI along with other members too that are useful too. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: sh: fsi: add fsi_hw_startup/shutdownKuninori Morimoto
This patch is preparation of cleanup suspend/resume patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: sh: fsi: cleanup suspend/resumeKuninori Morimoto
Current FSI driver was using saved_xxx variable for suspend/resume. OTOH, the start and stop of power/clock are controlled by fsi_hw_startup/fsi_hw_shutdown in current FSI driver. The all necessary registers value are set by fsi_hw_startup. So, if fsi_hw_shutdown is called when "suspend" is generated, and fsi_hw_startup is called at "resume", the saved_xxx are not needed. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: sh: fsi: remove fsi_module_init/killKuninori Morimoto
FSIA/B ports is enabled by default when power-on, and current FSI is supporting RuntimePM. In addition, current fsi_module_init/kill doesn't care simultaneous playback/recorde. This mean FSI port control is not needed. This patch remove fsi_module_init/kill Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: sh: fsi: make sure fsi_stream_push/pop access by spin lockKuninori Morimoto
fsi_stream_push/pop might be called in same time. This patch protect it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: sh: fsi: remove pm_runtime from fsi_dai_set_fmt.Kuninori Morimoto
pm_runtime_get/put_sync were used to access FSI register in fsi_dai_set_fmt which is called when ALSA probe. But this register value will disappear after pm_runtime_put_sync if platform is supporting RuntimePM. To solve this issue, this patch adds new variable for format, and remove pm_runtime_get/put_sync from fsi_dai_set_fmt. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: sh: fsi: tidyup unclear variable namingKuninori Morimoto
Some variables on this driver were a unclear naming, and were different unit (byte, frame, sample). And some functions had wrong name (ex. it returned "sample width" but name was "fsi_get_frame_width"). This patch tidy-up this issue, and the minimum unit become "sample". Special thanks to Takashi YOSHII. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: sh: fsi: irq control moves to fsi_port_start/stopKuninori Morimoto
Using fsi_irq_enable/disable in fsi_port_start/stop is very natural. This patch is preparation of cleanup suspend/resume patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: sh: fsi: add fsi_set_master_clkKuninori Morimoto
Current FSI driver is using set_rate call back function which is for master mode. By this patch, it is used from fsi_set_master_clk. This patch is preparation of cleanup suspend/resume patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: sh: fsi: tidyup parameter of fsi_stream_pushKuninori Morimoto
It is possible to create buff_len and period_len from substream->runtime. This patch is preparation of tidyup unclear variable naming patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-26ASoC: sh: fsi: Add module/port clock control functionKuninori Morimoto
The FIFO of each port were always working though it was not used in current FSI driver. This patch add module/port clock control function for fixing it. This patch is also caring suspend/resume. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Simon Horman <simon@horms.net> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-26ASoC: sh: fsi: add dev_pm_ops :: suspend/resumeKuninori Morimoto
Current FSI driver sets important settings when probing. And it are not set again as long as driver is not bind again. This mean FSI driver will lost it from register if suspend/resume are happen. This patch save important settings for suspend/resume. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Simon Horman <simon@horms.net> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-26ASoC: sh: fsi: add fsi_is_clk_master functionKuninori Morimoto
If FSI port is clock master, it use set_rate function which is callback from platform, and it is not necessary to call it if FSI port is clock slave. Current FSI driver called this callback if platform provide it. This patch modify it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Simon Horman <simon@horms.net> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-18ASoC: add a module alias to the FSI driverGuennadi Liakhovetski
This patch enables FSI driver autoloading on sh-mobile systems. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Reviewed-by: Simon Horman <horms@verge.net.au Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-11ASoC: fsi: driver safely remove for against irqKuninori Morimoto
free_irq and pm_runtime_disable should be called before snd_soc_unregister_xxx Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-11ASoC: fsi: modify vague PM control on probeKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-11ASoC: fsi: take care in failing case of dai registerKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-26ASoC: sh: fsi: modify selection method of I2S/PCM/SPDIF formatKuninori Morimoto
Current format selection of FSI-codecs depended on platform information for FSI, and chip default settings for codecs. It is not understandable/formal method. This patch modify FSI and FSI-codecs to use snd_soc_dai_set_fmt. But FSI can use I2S/PCM and SPDIF format today. It can be selected to I2S/PCM by snd_soc_dai_set_fmt, but can not select SPDIF. So, this patch change FSI platform information to have DAI/SPDIF mode. If platform selects DAI mode (default), FSI-codecs can select I2S/PCM by snd_soc_dai_set_fmt, and if it is SPDIF mode, FSI become SPDIF format. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-26ASoC: sh: fsi: free from NULL pointer of struct sh_fsi_platform_infoKuninori Morimoto
Current FSI driver assumed master->info is not NULL. This patch allow NULL in master->info Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-26ASoC: sh: fsi: move chan_num from fsi_stream to fsi_privKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-21ASoC: sh: fsi: Add snd_soc_dai_set_fmt supportKuninori Morimoto
This patch add snd_soc_dai_ops :: set_fmt to FSI driver and select master/slave clock mode by snd_soc_dai_set_fmt on fsi-xxx.c instead of platform infomation code. This patch remove fsi_is_master function which is no longer needed. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-21ASoC: sh: fsi: Add fsi_get_priv_frm_dai functionKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-17ASoC: sh: fsi: Add over/under run counterKuninori Morimoto
Current FSI driver had printed under/over run error if status register have its error bit. But runtime print cause the next error because print out is slow. This patch add error counter and print error when sound stop Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-17ASoC: sh: fsi: move fsi_irq_enable function to fsi_dai_triggerKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-13Merge branch 'topic/workq-update' into topic/asocTakashi Iwai
Conflicts: sound/soc/codecs/wm8350.c sound/soc/codecs/wm8753.c sound/soc/sh/fsi.c sound/soc/soc-core.c
2010-12-03ASoC: sh: fsi: remove runtime register check from fsi_master_xxxKuninori Morimoto
Current FSI driver was checking register range on fsi_master_xxx function. This runtime check was added to avoid an illegal access from wrong/mistake implementation. But it is useless check under the correct implementation. This patch escape runtime check by using macro technique. If there is wrong implementation, it will be compile error. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-03ASoC: sh: fsi: remove runtime register check from fsi_reg_xxxKuninori Morimoto
Current FSI driver was checking register range on fsi_reg_xxx function. This runtime check was added to avoid an illegal access from wrong/mistake implementation. But it is useless check under the correct implementation. This patch escape runtime check by using macro technique. If there is wrong implementation, it will be compile error. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-03ASoC: sh: fsi: change fsi->mst_ctrl to master->a/b_mclkKuninori Morimoto
There was a strange part where fsi->xxx had been used for fsi_master_xxx function instead of master->xxx in current FSI. This patch modify it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-03ASoC: sh: fsi: remove fsi_master_writeKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-03ASoC: sh: fsi: clean up SPDIF definesKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-24ARM: mach-shmobile: ap4evb: FSI clock use proper process for ak4642Kuninori Morimoto
Current AP4 FSI didn't use set_rate for ak4642, and used dummy rate when init. And FSI driver was modified to always call set_rate. The user which are using FSI set_rate is only AP4 now. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-24ARM: mach-shmobile: ap4evb: FSI clock use proper process for HDMIKuninori Morimoto
Current AP4 FSI set_rate function used bogus clock process which didn't care enable/disable and clk->usecound. To solve this issue, this patch also modify FSI driver to call set_rate with enough options. This patch modify it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-15ASoC: fsi: simultaneous playback/recorde supportKuninori Morimoto
Current FSI driver had not cared about simultaneous playback/capture on same port. This patch add new fsi_stream struct to care it, Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-12ASoC: Add fsi_is_play functionKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-12ASoC: fsi: Add new macro and shift for PortA/B In/OutKuninori Morimoto
Some FSI register have similar bit array for PortA/B and In/Out. This patch add new macro and shift for it Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-12ASoC: fsi: avoid un-necessary status readKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-12ASoC: fsi: remove un-necessary variable from fsi_dai_startupKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-12ASoC: fsi: Add fsi_get_frame_width functionKuninori Morimoto
It is not so important for now. But will be used in future. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-05ASoC: sh: fix build error: terminate the platform device ID listGuennadi Liakhovetski
Platform driver ID table must be zero-element terminated. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-20ASoC: fsi: merge fsi_data_push/pop to fsi_fifo_data_ctrlKuninori Morimoto
Current FSI driver had data push/pop functions. But the main operation of these 2 were very similar. This mean it is possible to merge these to 1 function. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-20ASoC: fsi: modify variable name to easy to understandKuninori Morimoto
Current FSI driver is using data-length / width / number / offset for variables. But it was a very confusing name. This patch rename them to easy to understand, and add new functions for it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-19ASoC: fsi: Add fsi_dma_soft_push/pop functionKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-19ASoC: fsi: modify noisy comment outKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-03 05:52:16 +0000