summaryrefslogtreecommitdiffstats
path: root/sound/soc
AgeCommit message (Collapse)Author
2011-02-25Merge branch 'for-2.6.38' into for-2.6.39Mark Brown
2011-02-25ASoC: Tegra: Move utilities to separate moduleStephen Warren
The utilities will be required by every machine driver. Including the utility object directly into every machine driver causes a build failure if the modules are actually built into the kernel, since each will define the symbols exported by the utility file. Solve this by moving the utility object into a separate module. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-25ASoC: soc-dapm: Include quotes around contents in debugfs entriesDimitris Papastamos
Sometimes the name of the control switch of a dapm route contains spaces which makes it impossible to distinguish it from the source widget. Add quotes around the names of the widgets to makes these parsable. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-25ASoC: Remove -codec suffix from WM9081 driverMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-25ASoC: correct pxa AC97 DAI namesDmitry Eremin-Solenikov
Correct names for pxa AC97 DAI are pxa2xx-ac97 and pxa2xx-ac97-aux. Fix that for all PXA platforms. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-02-24ASoC: Pass the jack to jack notifiersMark Brown
We're currently not passing anything and this will make the card and so on more discoverable. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-22ASoC: Simplify default WM8958 jack detection codeMark Brown
The default WM8958 jack detection handler implements a full set of buttons and also support for video detection. Support for multi-button jacks is fairly system specific and will usually require some tuning for headsets so simplify the implementation to only report a simple short to ground button, leaving multi-button headsets to be handled by system specific code. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-22ASoC: Support configuration of WM8958 microphone bias analogue parametersMark Brown
The WM8958 has a different microphone bias architecture to WM8994 so needs different configuration to WM8994. Support this in platform data. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-22ASoC: Support WM8958 direct microphone detection IRQMark Brown
Allow direct routing of the WM8958 microphone detection signal to a GPIO to be used, saving the need to demux the interrupt. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-22ASoC: Mark WM8958 microphone bias registers as readableMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-22ASoC: Run bias level changes for all DAPM contexts in parallelMark Brown
As bias level changes can be quite time consuming and the bias changes for multiple devices aren't strongly tied to each other (if anything it can be advantageous to bring different devices up together) we can improve the state transition time for multi-component systems by running the bias level changes for all the devices in parallel. This is very simple to achieve using the kernel async functionality so use that to schedule the work. This should have no practical effect for the overwhelming majority of systems which have a single DAPM context - we'll bounce into another thread to do the bias level change but otherwise everything will happen in exactly the same order as it did before. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-22ASoC: Remove card from snd_soc_dapm_set_bias_level()Mark Brown
We can get the card from the DAPM context so don't bother passing it as an argument. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-22Merge branch 'for-2.6.38' into for-2.6.39Mark Brown
2011-02-22ASoC: Hook wm_hubs micbiases up to CLK_SYSMark Brown
The microphone detection functionality requires a clock to work. In any non-detection case where the MICBIAS is enabled CLK_SYS will be needed anyway so there is no negative impact on power consumption. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-22ASoC: Correct definition of WM8903_VMID_RES_5KMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-22ASoC: Fix WM8958 default microphone detection argument orderingMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-18ASoC: Hook wm_hubs micbiases up to CLK_SYSMark Brown
The microphone detection functionality requires a clock to work. In any non-detection case where the MICBIAS is enabled CLK_SYS will be needed anyway so there is no negative impact on power consumption. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-18ASoC: Mark WM8958 microphone detection registers readableMark Brown
So they show up in codec_reg. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-18ASoC: Allow GPIO jack detection to be configured as a wake sourceMark Brown
Some systems wish to use jacks as wake sources. Provide a wake flag in the GPIO configuration which causes the driver to enable the IRQ as a wake source. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-18ASoC: Log wm_hubs DC servo operation code when reporting a timeoutMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-18ASoC: Remove export of snd_soc_dapm_stream_event()Mark Brown
The only thing that should ever be calling this is soc-core and that is built as part of the same module so doesn't need the export. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-18ASoC: Fix missing space in WM8994Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-15ASoC: sst_platform: fix the pulseaudio errorVinod Koul
Pulseaudio doesnt work with current driver and it was root caused to absense of hw_params function and malloc_pages in it. This patch adds this and allows pa to work fine with these drivers Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Harsha Priya <priya.harsha@intel.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-15ASoC: mfld_machine: make use of soc_register_card APIVinod Koul
This patch removes the old method of soc-audio device creation in mfld machine and makes use of new soc_register_card API to register the card Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Harsha Priya <priya.harsha@intel.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-15ASoC: sn95031: fix the amic tlv scaleVinod Koul
The tlv scale is defined as (min, step, mute). The mute is not supported here so put the value to 0 Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Harsha Priya <priya.harsha@intel.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-15ASoC: sn95031: fix the DMIC path routingVinod Koul
This patch makes the DMIC dynamically connect to TX Mux, earlier code had erroneously made this as static path Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Harsha Priya <priya.harsha@intel.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-15ASoC: sn95031: make playback rails depend on actual pins they controlVinod Koul
This patch makes the codec playback rails (headset and speaker) depend on actual pins they control. This enables better power management of the codec Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Harsha Priya <priya.harsha@intel.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-13Merge branch 'for-2.6.38' into for-2.6.39Mark Brown
2011-02-13ASoC: Warn if WM8903 platform data is used to enable microphone IRQMark Brown
The WM8903 interrupts are clear on read so if the WM8903 detection is enabled from platform data when the IRQ is in use (rather than using a direct signal from a GPIO) status may be lost during startup. Help users spot this misconfiguration by adding a WARN_ON(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-13ASoC: Tegra: Add MODULE_ALIASStephen Warren
With the appropriate MODULE_ALIAS in place, the audio modules will be automatically loaded; there is no longer a need for manual modprobes. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-13ASoC: Tegra: Harmony: Explicitly set mic enablesStephen Warren
Harmony has both an external mic (a regular mic jack) and an internal mic (a 0.1" two-pin header on the board). The external mic is connected to the WM8903's IN1L pin, and is supported by the current driver. The internal mic is connected to the WM8903's IN1R pin, and is not supported by the current driver. It appears that no Harmony systems were shipped with any internal mic connected; users were expected to provide their own. This makes the internal mic connection less interesting. The WM8903's Mic Bias signal is used for both of these mics. For each mic, a GPIO drives a transistor which gates whether the mic bias signal is actively connected to that mic, or isolated from it. The dual use of the mic bias for both mics makes a general-purpose complete implementation of mic detection using the mic bias complex. So, for simplicity, the internal mic is currently ignored by the driver. This patch configures the relevant GPIOs to enable the mic bias connection to the external mic, and disable the mic bias connection to the internal mic. Note that in practice, this is the default state if these GPIOs aren't configured. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-13ASoC: Harmony: Call snd_soc_dapm_nc_pinStephen Warren
Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-13ASoC: Tegra: Harmony: Implement mic detectionStephen Warren
* Add jack definition for mic jack * Request wm8903 to enable mic detection * Force mic bias on, since it's required for mic detection Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-13ASoC: Ensure supplies are maintained for force enabled widgetsMark Brown
If a widget has been force enabled then not only do we need to keep the widget itself enabled, we also need to keep any supplies the widget requires enabled. The user could force all the individual widgets on but this requires too much knowledge of device internals. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-13ASoC: WM8994: Improve playback robustnessDimitris Papastamos
On WM8994 revision D and earlier ensure proper playback robustness as some rare use cases can trigger issues. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-02-13ASoC: WM8994: Improve robustness in some use casesDimitris Papastamos
Ensure that on disabling certain registers such as AIF1DAC1L, AIF1DAC1R etc. the AIF1CLK and AIF2CLK remain enabled. Similarly when enabling those registers, AIF1CLK and AIF2CLK will remain disabled. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-02-13ASoC: WM8903: Fix mic detection enable logicStephen Warren
The mic detection HW should be enabled when either mic or short detection is required, not when only both are required. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-02-11ASoC: Allow use sleeping gpio in soc-jackJarkko Nikula
It is safe to use sleeping gpio in snd_soc_jack_gpio_detect as it is not called from interrupt context. This avoids WARN_ON from __gpio_get_value if sleeping gpio is registered for jack. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-11ASoC: mid-x86: Use the soc-jack apis for jack type detectionVinod Koul
This patch modifies the mfld_machine to use the new jack apis for adding the voltage zones for jack type detection. It also modifed TI sn95031 codec driver to use these new apis Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Harsha Priya <priya.harsha@intel.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-11Merge branch 'for-2.6.38' into for-2.6.39Mark Brown
2011-02-11ASoC: Use explicit sequence for WM8903 bias offMark Brown
This makes no real difference compared to the write sequencer sequence that was previously used but can run without a clock being provided. Also remove the write sequencer support code as this was the last use of it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-11ASoC: Don't use write sequencer to power up WM8903Mark Brown
The write sequencer sequencer sequence takes longer than is desirable as it brings up a full playback path which is not required at this point. Open coding the sequence cuts the startup time by two thirds. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-11ASoC: Convert WM8903 bias management to use snd_soc_update_bits()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-11ASoC: CX20442: fix wrong reg_cache_default contentJanusz Krzysztofik
Content of the CX20442's snd_soc_codec_driver.reg_cache_default pointed area, introduced with my recent NULL pointer dereferece fix (commit f019ee5feb344ff0b22b58df4568676295aae14f), occured wrong after further testing, more thorough than just booting successfully. There are two problems with it: 1) It should read (1 << CX20442_TELOUT) | (1 << CX20442_MIC), not CX20442_TELOUT | CX20442_MIC. 2) While correctly matching actual codec hardware state on boot when fixed per 1), a few more code modifications would still be required to reflect that state not only into register cache, but also force them into DAPM pins state, otherwise an inconsitency occures which may prevent further codec state changes from being applied correctly. As a result, the phone stops ringing after reboot, until someone picks up the handset for the first time. Revert that reg_cache_default content to a working, previous de facto default value of 0, in hope this change can still be accepted as an rc cycle fix. Created and tested against linux-2.6.38-rc4 Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-10ASoC: Actively manage WM8903 DC servo configurationMark Brown
Explicitly cache the DC servo offsets for digital paths in the driver, allowing them to be preserved over suspend and resume, and ensure that we recalibrate analogue outputs paths when they are in use so that we cover any changes in the input offset. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-09ASoC: add support for multiple jack typesVinod Koul
This patch adds soc-jack support for adding voltage zones and for detecting jack type Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Harsha Priya <priya.harsha@intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-09Merge branch 'for-2.6.38' into for-2.6.39Mark Brown
2011-02-09ASoC: Sync initial widget state with hardwareMark Brown
ASoC generally uses the register defaults for everything, but in some cases the hardware will default to enabling some of the DAPM widgets (clocks for example). Ensure that DAPM knows about the actual widget state at initialisation by reading the enable bits after instantiating the widgets so they don't get left enabled needlessly. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-09ASoC: Fix WM8903 DAC mute defaultMark Brown
The WM8903 register map does not mute the DAC by default at startup so we need to explicitly do so. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-09ASoC: Dynamically manage CLK_SYS in WM8903Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-04 10:13:35 +0000