summaryrefslogtreecommitdiffstats
path: root/sound/soc
AgeCommit message (Collapse)Author
2011-02-09ASoC: Davinci: Use resource_size() helper functionVaibhav Bedia
This patch modifies the Davinci i2s and mcasp drivers to make use of the resource_size() helper function for readability. Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-09ASoC: sn95031: Add support for reading mic biasVinod Koul
This patch adds support to read the mic bias voltage when a jack is inserted. It uses ADC to measure. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Harsha Priya <priya.harsha@intel.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-09ASoC: mfld_machine: Add support for jack detectionVinod Koul
This patch adds support for registering jack interupt and registering jack with core Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Harsha Priya <priya.harsha@intel.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-09ASoC: sn95031: Add jack support in the codecVinod Koul
This patch adds support for jack detection and reporting in the codec It however is not fully functional as it doesn't measure adc to figure out what got inserted which will be added later Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Harsha Priya <priya.harsha@intel.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-09ASoC: Tegra: Harmony: Add switch control for speakerStephen Warren
Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-09ASoC: Tegra: Harmony: Add headphone jack detectionStephen Warren
Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-08ASoC: soc-cache: dereferencing before checkingDan Carpenter
The patch c358e640a66 "ASoC: soc-cache: Add trace event for snd_soc_cache_sync()" introduced a dereference of "codec->cache_ops" before we had checked it for NULL. I pulled the check forward, and then pulled everything in an indent level. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-08ASoC: CS4271: Move Chip Select control out of the CODEC code.Alexander Sverdlin
Move Chip Select control out of the CODEC code for CS4271. Signed-off-by: Alexander Sverdlin <subaparts@yandex.ru> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-07ASoC: codecs: wm8753: Fix DAI mode switchingLars-Peter Clausen
The wm8753 codec supports switching between different DAI modes. The current drivers tries to implement this by changing the DAI driver at runtime. But to properly work this would require support from the ASoC core. So this patch takes a different approch on how the DAI mode switching is implemented. The only difference, from a driver point of view, between the different DAI modes is how to program the DAI format to the hardware. So what this patch is, it stores the current format for each DAI in the drivers private struct and when the DAI mode is changed the format gets simply reprogrammed according to the new DAI mode. Futhermore this patch restricts the changing of the DAI format to when the codec is inactive. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-07ASoC: mid-x86: Fix dependency on intel_sst driverVinod Koul
Enabling medfield asoc driver causes compliation error when intel_sst is not selected ERROR: "register_sst_card" [sound/soc/mid-x86/snd-soc-sst-platform.ko] undefined! This patch puts proper dependency to elimate build error Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Harsha Priya <priya.harsha@intel.com> Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-04ASoC: ep93xx-ac97: remove extra empty lineMika Westerberg
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-03Merge branch 'for-2.6.38' into for-2.6.39Mark Brown
2011-02-03ASoC: Improve WM8994 digital power sequencingMark Brown
On WM8994 revision D and earlier ensure optimal sequencing with simultaneous usage of AIF1 and AIF2 by tying the signals together so if paths through both are connected the streams are started simultaneously. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
2011-02-03ASoC: Create an AIF1ADCDAT signal widget to match AIF2Mark Brown
Due to the different routing for AIF1 and AIF2 we weren't using a single widget to represent the ADCDAT signal. For consistency add one. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
2011-02-03asoc: davinci: da830/omap-l137: correct cpu_dai_nameVaibhav Bedia
McASP1 is used on the DA830/OMAP-L137 platform for the codec. This is different from the DA850/OMAP-L138 platform which uses McASP0. This is fixed by adding a new snd_soc_dai_link struct. Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-03ASoC: Sort ALC5623 in Kconfig and MakefileMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-02Merge branch 'for-2.6.38' into for-2.6.39Mark Brown
2011-02-02ASoC: fill in snd_soc_pcm_runtime.card before calling snd_soc_dai_link.init()Janusz Krzysztofik
The .card member of the snd_soc_pcm_runtime structure pointed to by the snd_soc_dai_link.init() argument used to be initialized before the function being called. This has changed, probably unintentionally, after recent refactorings. Since the function implementations are free to make use of this pointer, move its assignment back before the function is called to avoid NULL pointer dereferences. Created and tested on Amstrad Delta againts linux-2.6.38-rc2 Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-02ASoC: soc-core: Support debugfs entries larger than PAGE_SIZE bytesDimitris Papastamos
For some codecs with large register maps, it was not possible to dump all registers via the codec_reg file but only up to PAGE_SIZE bytes. This patch fixes this problem. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-02ASoC: PXA: formattingSven Neumann
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-02ASoC: Update PM ifdefs for exported suspend/resumeMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-01Merge branch 'for-2.6.39' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into for-2.6.39
2011-02-01ASoC: Use snd_pcm_format_width() in snd_soc_params_to_frame_size()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-01ASoC: soc-core: Ensure codec_reg has fixed length fieldsDimitris Papastamos
Make the format of the codec_reg file more easily parsable. Remove the header field which gives the codec name. These changes are important when it comes to extend the debugfs codec_reg file to dump more than PAGE_SIZE bytes to make it easier to calculate offsets within the file. We still need to handle the case when the snd_soc_read() call fails and <no data: %d> is outputted. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-01Merge branches 'for-2.6.38' and 'tegra-arch' into for-2.6.39Mark Brown
2011-02-01ASoC: CX20442: fix NULL pointer dereferenceJanusz Krzysztofik
The CX20442 codec driver never provided the snd_soc_codec_driver's .reg_cache_default member. With the latest ASoC framework changes, it seems to be referred unconditionally, resulting in a NULL pointer dereference if missing. Provide it. Created and tested on Amstrad Delta against linux-2.6.38-rc2 Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-01ASoC: Amstrad Delta: fix const related build errorJanusz Krzysztofik
The Amstrad Delta ASoC driver used to override the digital_mute() callback, expected to be not provided by the on-board CX20442 CODEC driver, with its own implementation. While this is still posssible when substituting the whole empty snd_soc_dai_driver.ops member (the CX20442 case), replacing snd_soc_dai_ops.digital_mute only is no longer correct after the snd_soc_dai_driver.ops member has been constified, and results in build error. Drop this actually not used code path in hope the CX20442 driver never provides its own snd_soc_dai_ops structure. Created and tested against linux-2.6.38-rc2 Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-01ASoC: Tegra: Harmony: Remove redundant !!Stephen Warren
gpio_set_value* should accept logic values not just 0 or 1. The WM8903 GPIO driver has been fixed to work this way, so remove the redundant !! previously required when it didn't accept values >1. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-01ASoC: omap: rx51: Add earphone supportJarkko Nikula
Earphone in Nokia RX-51/N900 is connected to left HP output of B part of the TLV320AIC34 dual codec. In RX-51 the codec A is used as a traditional codec and the codec B as an auxiliary device. Audio from codec A goes via the codec B to earphone: MONO_LOUT of A -> LINE2R of B (B interconnects) -> HPLOUT of B -> Earphone. Take earphone into use by utilizing the recent ASoC auxiliary and cross-device support. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-31ASoC: Accept any logical value WM8903 GPIO set()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-31ASoC: Accept any logical value for WM8962 GPIO set()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-31ASoC: neo1973_wm8753 audio support does not require scoopH Hartley Sweeten
This driver does not use any of the functionality provided by the scoop hardware. Remove the unneeded header. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-31ASoC: Tegra: I2S: Use dev_err not pr_errStephen Warren
Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-31ASoC: Tegra: utils: Don't use global variablesStephen Warren
Instead, have the machine driver provide storage for the utility data somehow. For Harmony in particular, store this within struct tegra_harmony, itself referenced by snd_soc_card's drvdata. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-31ASoC: Tegra: Harmony: Use dev_err not pr_errStephen Warren
Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-31ASoC: Tegra: Harmony: Fix indentation issue.Stephen Warren
Indent with TABs not spaces. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-31ASoC: Tegra: Harmony: Support the internal speakerStephen Warren
Add DAPM widget definitions for the internal speaker paths. Currently, this path is always enabled while playback is active. Add code to control the speaker amplifier GPIO. The GPIO is requested during _init, since that's the first time it is guaranteed that the WM8903 module is loaded, probed, and hence has exported its GPIO chip. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-31ASoC: Tegra: Harmony: Don't use soc-audio platform deviceStephen Warren
Previously, snd-soc-tegra-harmony internally instantiated a platform device object whenever the module was loaded. Instead, switch to a more typical model where arch/arm/mach-tegra defines a platform device, and snd-soc-tegra-harmony acts as a driver for such a platform device. Define a new struct tegra_harmony to store driver data in the future. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-31ASoC: Move card list initialization to snd_soc_register_cardStephen Warren
All ASoC cards need snd_soc_initialize_card_lists called. Previously, it was only called for cards backed by a "soc-audio" platform device, via soc_probe(). However, it's also needed for cards backed by other platform devices, and registered directly via snd_soc_register_card(). Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-31ASoC: mid-x86: Add support for capture in machine driverHarsha Priya
This configures the capture unused pins Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Harsha Priya <priya.harsha@intel.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-31ASoC: sst_platform: add support for capture stream on headset daiHarsha Priya
Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Harsha Priya <priya.harsha@intel.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-31ASoC: sn95031: add capture supportHarsha Priya
This patch adds the support for capture path in sn95031 codec. This codec supports upto 6DMICs, 2 AMICs and Linein. The linein and AMICs are connected through a MUX to ADC. The TX paths can be assigned to any of the ADCs or DMICs. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Harsha Priya <priya.harsha@intel.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-28Merge branch 'for-2.6.38' into for-2.6.39Mark Brown
2011-01-28ASoC: Fix mask/val_mask confusion snd_soc_dapm_put_volsw()Stephen Warren
snd_soc_dapm_put_volsw() has variables for both the unshifted and shifted mask for updates commit 97404f (ASoC: Do DAPM control updates in the middle of DAPM sequences) got confused between the two of these. Since there's no need to keep a copy of the unshifted mask fix this and simplify the code by using only one mask variable. [Completely rewrote the changelog to describe the issue -- broonie.] Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-28ASoC: soc-core: Increment codec and platform driver refcounts before probingJarkko Nikula
Commit f6c2ed5 "ASoC: Fix the device references to codec and platform drivers" moved codec and platform driver refcount increments from soc_bind_dai_link to more appropriate places. Adjust a little them so that refcounts are incremented before executing the driver probe functions. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Harsha Priya <priya.harsha@intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-28ASoC: DaVinci: fix kernel panic due to uninitialized platform_dataManjunathappa, Prakash
This patch fixes the Kernel panic issue on accessing davinci_vc in cq93vc_probe function. struct davinci_vc is part of platform device's private driver data(codec->dev->p->driver_data) and this is populated by DaVinci Voice Codec MFD driver. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-27ASoC: omap: rx51: Add stereo output support to audio jackJarkko Nikula
Audio jack in Nokia RX-51/N900 is driven by TPA6130 headphone amplifier. This patch adds support for it and stereo output can be active when "Jack Function" == "TV-OUT" || "Headphone". As the TPA6130 can output very high volume levels the output is limited with snd_soc_limit_volume. Limiting value is found from Maemo kernel sources. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-27Merge branch 'for-2.6.38' into for-2.6.39Mark Brown
2011-01-27ASoC: Add subsequence information to seq_notify callbacksMark Brown
Allows drivers to distinguish which subsequence is being notified when they get called back. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-27ASoC: Make cache status available via debugfsMark Brown
Could just as well live in sysfs but sysfs doesn't have the simple value export helpers debugfs does. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-01-25 19:01:38 +0000