summaryrefslogtreecommitdiffstats
path: root/sound/soc
AgeCommit message (Collapse)Author
2013-01-12ASoC: wm_adsp: Add basic firmware selection supportMark Brown
There are many firmwares available for ADSP devices. Add basic support for selecting between them, including a couple of feature sets in the set of available firmware to start off with. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-12ASoC: wm5110: Correct AEC loopback maskMark Brown
The generated defines in the header are pre-shifted. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-12ASoC: wm5102: Correct AEC loopback maskMark Brown
The generated defines in the header are pre-shifted. Reported-by: Heather Lomond <Heather.Lomond@wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-12ASoC: dapm: Fix sense of regulator bypass modeMark Brown
Enable bypass when the regulator is idle, not when it is in use. This is consistent with what the few existing users actually want. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-12ASoC: pcm: delete some dead codeDan Carpenter
I've removed several unreachable returns. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-12ASoC: fsl: fix multiple definition of init_moduleShawn Guo
With commit f2818d0 (ASoC: fsl: fix miscompilation of snd-soc-imx-pcm), we will see the following build error when building modules with CONFIG_SND_IMX_SOC=m in imx_v6_v7_defconfig. CC [M] sound/soc/fsl/phycore-ac97.o LD [M] sound/soc/fsl/snd-soc-fsl-ssi.o LD [M] sound/soc/fsl/snd-soc-fsl-utils.o LD [M] sound/soc/fsl/snd-soc-imx-ssi.o LD [M] sound/soc/fsl/snd-soc-imx-audmux.o LD [M] sound/soc/fsl/snd-soc-imx-pcm.o sound/soc/fsl/imx-pcm-dma.o: In function `init_module': imx-pcm-dma.c:(.init.text+0x0): multiple definition of `init_module' sound/soc/fsl/imx-pcm-fiq.o:imx-pcm-fiq.c:(.init.text+0x0): first defined here sound/soc/fsl/imx-pcm-dma.o: In function `cleanup_module': imx-pcm-dma.c:(.exit.text+0x0): multiple definition of `cleanup_module' sound/soc/fsl/imx-pcm-fiq.o:imx-pcm-fiq.c:(.exit.text+0x0): first defined here make[4]: *** [sound/soc/fsl/snd-soc-imx-pcm.o] Error 1 Instead of using bool for SND_SOC_IMX_PCM_FIQ and SND_SOC_IMX_PCM_DMA to fix the original issue, we should completely remove SND_SOC_IMX_PCM and have imx-pcm.o statically linked with imx-pcm-fiq.o or imx-pcm-dma.o. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-11ASoC: OMAP: HDMI: Initialize IEC-60958 channel status wordRicardo Neri
As the IEC-60958 channel status word is set by ANDing and ORing with the appropriate definitions, the word bytes need to be initialized to zero to avoid misconfiguration due to previous hw_params calls. Signed-off-by: Ricardo Neri <rneri@dextratech.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-11ASoC: twl6040: Remove leftover code from hs/hf ramp implementationPeter Ujfalusi
The code to do the ramp has been removed a long time ago. Remove the remaining code as well since this is not needed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-11ASoC: twl6040: Switch to use system workqueue for jack reportingPeter Ujfalusi
There's no need to create a queue for this anymore Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-11ASoC: twl6040: Convert to use devm_* when possiblePeter Ujfalusi
In this way we can clean up the probe and remove paths Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-11ASoC: twl6040: Only set the bias_level once in twl6040_resume()Peter Ujfalusi
No need to set the bias_level twice to _STANDBY - since this is the only state the device could be at suspend time. The driver do not support idle_bias_off yet. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-11ASoC: twl4030: Remove suspend/resume soc driver operationsPeter Ujfalusi
With idle_bias_off these are no longer needed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-11ASoC: twl6040: Convert PLUGINT to no-suspend irqMisael Lopez Cruz
Convert headset PLUGINT interrupt to NO_SUSPEND type in order to allow handling of insertion/removal events while device is suspended. Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-10ARM: S3C24XX: make h1940.h and h1940-latch.h localKukjin Kim
The headers can be local in mach-s3c24xx/. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-01-10ARM: S3C24XX: make gta02.h localKukjin Kim
The header can be local in mach-s3c24xx/ and sort out inclusions. Accordingly, the GTA02_ macro in driver can be replaced. Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-01-10Merge remote-tracking branch 'asoc/fix/wm5100' into tmpMark Brown
2013-01-10Merge remote-tracking branch 'asoc/fix/wm2200' into tmpMark Brown
2013-01-10Merge remote-tracking branch 'asoc/fix/wm2000' into tmpMark Brown
2013-01-10Merge remote-tracking branch 'asoc/fix/wm-adsp' into tmpMark Brown
2013-01-10Merge remote-tracking branch 'asoc/fix/sta529' into tmpMark Brown
2013-01-10Merge remote-tracking branch 'asoc/fix/sgtl5000' into tmpMark Brown
2013-01-10Merge remote-tracking branch 'asoc/fix/lm49453' into tmpMark Brown
2013-01-10Merge remote-tracking branch 'asoc/fix/cs42l52' into tmpMark Brown
2013-01-10Merge remote-tracking branch 'asoc/fix/cs4271' into tmpMark Brown
2013-01-10Merge remote-tracking branch 'asoc/fix/core' into tmpMark Brown
2013-01-10ASoC: ak4642: add Device Tree supportKuninori Morimoto
Support for loading the ak4642 codec module via devicetree. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-09sound: soc: Fix typo in sound/codecsMasanari Iida
Correct spelling typo in sound/soc/codecs Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-01-08ASoC: wm_adsp: Implement support for algorithm-specific coefficient blocksMark Brown
WMDR coefficient files can specify coefficients in terms of algorithm specific data regions. Record the start addresses of these regions while parsing the algorithms and then use them to handle coefficients with these formats. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-08ASoC: wm_asdp: Validate sanity of algorithm countMark Brown
If we run into I/O problems the algorithm count may be crazy, validate it before we proceed and dump the read data for diagnostic purposes. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-08ASoC: wm_adsp: Factor out calculation of memory base addressesMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-08ASoC: wm_adsp: Add support for parsing algorithmsMark Brown
ADSP devices report information on the algorithms loaded on them. Parse this data and use it to allow coefficients to be configured for specific algorithms. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-08ASoC: arizona: Disable free-running mode on FLL1Charles Keepax
The free running mode can cause problems when attempting to bring up the FLL running from a defined clock source. This patch disables free-running mode. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-08ASoC: mxs-saif: Use a signed integer for error valueFabio Estevam
saif->id and saif->master_id are unsigned, so they can not be negative. Fix the following warning when building with W=1 option: sound/soc/mxs/mxs-saif.c: In function 'mxs_saif_probe': sound/soc/mxs/mxs-saif.c:676:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] sound/soc/mxs/mxs-saif.c:688:3: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] sound/soc/mxs/mxs-saif.c:692:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] Use a signed variable 'ret' to handle the error values. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-08ASoC: mxs-saif: Remove platform dataFabio Estevam
All MXS users have been converted to device tree and the board files have been removed. No need to keep platform data in the driver. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-07ASoC: wm_adsp: Ensure that block writes are from DMA aligned addressesMark Brown
Otherwise we won't run correctly on systems that require this for larger data transfers. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-04ASoC: arizona: Factor out rate selection codeMark Brown
In preparation for more advanced sample rate managment move the existing code out of the main hw_params() function. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-04Merge branch 'fix/arizona' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-arizona
2013-01-04ASoC: arizona: Allow runtime reconfiguration of the output modeMark Brown
Some systems use external analogue switches to connect more analogue devices to the CODEC than are supported by the device. In some systems this requires changing the switched output from single ended to differential mode dynamically at runtime. Add a new function arizona_set_output_mode() to support this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-04ASoC: wm2000: Fix sense of speech clarity enableMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2013-01-04ASoC: wm5100: Remove DSP B and left justified formatsMark Brown
These are not supported Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2013-01-04ASoC: wm5102: Implement routing and power management for ISRCsMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-04ASoC: arizona: Remove DSP B and left justified AIF modesMark Brown
These are not supported. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2013-01-04ASoC: wm2200: Remove DSP B and left justified AIF modesMark Brown
These are not supported. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2013-01-03powerpc, dma: move bestcomm driver from arch/powerpc/sysdev to drivers/dmaPhilippe De Muyter
The bestcomm dma hardware, and some of its users like the FEC ethernet component, is used in different FreeScale parts, including non-powerpc parts like the ColdFire MCF547x & MCF548x families. Don't keep the driver hidden in arch/powerpc where it is inaccessible for other arches. .c files are moved to drivers/dma/bestcomm, while .h files are moved to include/linux/fsl/bestcomm. Makefiles, Kconfigs and #include directives are updated for the new file locations. Tested by recompiling for MPC5200 with all bestcomm users enabled. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2013-01-03ASoC: fsi: don't use platform info pointer on probe()Kuninori Morimoto
Current FSI driver is using platform info pointer, but it is not good design for DT support. This patch made it not to use platform info pointer. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-02ASoC: wm5102: Improve speaker enable performanceMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-02ASoC: palm27x: register card in platform_driver probeMike Dunn
Remove creation of an soc-audio device from the machine platform_driver probe function, and add a call to snd_soc_register_card() instead. The current code still works, but this mechanism has been deprecated, if I'm not mistaken. The ASoC core code produces the warning "ASoC: machine Palm/PXA27x should use snd_soc_register_card()" Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-02ASoC: palm27x: fix widgets and routes in dai_link initMike Dunn
ASoC core code now handles creation of controls and routing based on contents of struct snd_soc_card, so remove calls to snd_soc_dapm_new_controls() and snd_soc_dapm_add_routes() from the snd_soc_dai_link init function, and add widget and route definitions to struct snd_soc_card. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-02ASoC: OMAP: Remove obsolete machine drivers for Zoom2 and SDP3430Peter Ujfalusi
These boards are using the common omap-twl4030 machine driver, no need for separate machine drivers anymore. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-02ASoC: omap-twl4030: Add support for routing, voice port and jack detectPeter Ujfalusi
Update the common machine driver to support more boards including Zoom2 and SDP3430. - Support for voice port of twl4030 - HS jack plug detection support - The audio routing can be fine tuned via pdata or via provided routing table from DT. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-16 17:03:07 +0000