summaryrefslogtreecommitdiffstats
path: root/sound/soc
AgeCommit message (Collapse)Author
2015-01-05ASoC: alc5632: Constify struct regmap_config and snd_soc_codec_driverKrzysztof Kozlowski
The regmap_config struct may be const because it is not modified by the driver and regmap_init() accepts pointer to const. Make struct snd_soc_codec_driver const as well (snd_soc_register_codec() accepts pointer to const). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-05ASoC: adi: Add missing return statement.Andrew Jackson
The probe routine was disabling the clock even if the system was configured successfully. Add a return statement to leave clocks enabled. Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-05ASoC: Intel: Don't change offset of block allocator during fixed allocateJie Yang
The offset of block allocator, ba->offset, should not be changed during fixed address allocating, for the caller may treat it as the offset of allocated memory and use it. In the case that we allocate more than 1 blocks, we should make sure this offset is correct. Here introduces a temp allocator for the later continuous allocating. Signed-off-by: Jie Yang <yang.jie@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-05ASoC: Intel: Delete an unnecessary check before the function call ↵Markus Elfring
"release_firmware" The release_firmware() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-05ASoC: fsi: Deletion of unnecessary checks before the function call "clk_enable"Markus Elfring
The clk_enable() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-05ASoC: Intel: Delete an unnecessary check before the function call "sst_dma_free"Markus Elfring
The sst_dma_free() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-05ASoC: ts3a227e: Check and report jack status at probeCheng-Yi Chiang
ts3a227e does not trigger interrupt to report jack status when system boots from warm reset because ts3a227e's power remains on during warm reset. Read jack status at probe to get current jack status. Note that if system boots from EC reset, then this issue will not happen. Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-31Merge branch 'topic/msbits' into for-nextTakashi Iwai
2014-12-31ASoC: pcm: Fix unused variable warningTakashi Iwai
sound/soc/soc-pcm.c: In function ‘soc_pcm_set_msb’: sound/soc/soc-pcm.c:307:11: warning: unused variable ‘i’ [-Wunused-variable] Fixes: 0e2a37513a1f ('ASoC: pcm: Use wildcard msbits constraints') Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-30ASoC: dwc: Add devicetree support for Designware I2SAndrew Jackson
Allow the driver to be configured through a device tree rather than platform data. Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-30ASoC: dwc: Register components with managed interfaceAndrew Jackson
Register SOC component using managed interface to simplify error handling and future introduction of device tree. Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-30ASoC: dwc: Prepare clock before useAndrew Jackson
Some I2S clocks may require some time to get the clock ready for operation and so need to be prepared before they are enabled. So, prepare the clock as well as enabling it, but combine the two through clk_prepare_enable. Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-30ASoC: dwc: Read I2S block configuration from registersAndrew Jackson
The I2S block provides component parameter registers which describe how the block is instantiated. Use these registers to extract the block's configuration rather than relying on platform data. Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-30ASoC: dwc: Switch to managed clock resourceAndrew Jackson
Simplify error handling during probe by using managed clock resources. Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-30ASoC: mxs-saif: Do not store the irq number in the private structureFabio Estevam
The irq number is only used inside the probe function, so there is really no need to store it in the private structure. Use a local 'irq' variable to hold the the irq number instead. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-30ASoC: davinci-mcasp: Support for combined tx/rx interrupt linePeter Ujfalusi
Some SoC, like da850/OMAP-L138 uses one common interrupt request for TX/RX events. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-30Merge branch 'topic/msbits' into for-nextTakashi Iwai
2014-12-30ASoC: pcm: Use wildcard msbits constraintsLars-Peter Clausen
Use the new wildcard msbits constraints instead of installing a constraint for each available sample format width. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-30ASoC: fsl_esai: Fix incorrect xDC field width of xCCR registersAurelien BOUIN
The xDC field should have 5 bit width according to Reference Manual. Thus this patch fixes it. Signed-off-by: Aurelien BOUIN <a_bouin@yahoo.fr> Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2014-12-30ASoC: fsl_asrc: Use dev_name() for registering the irqFabio Estevam
The 'name' array is currently stored inside the fsl_asrc private structure only for registering the interrupt name. This can be simplified by registering it with dev_name() instead. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-30ASoC: fsl_spdif: Use dev_name() for registering the irqFabio Estevam
The 'name' array is currently stored inside the fsl_spdif_priv private structure only for registering the interrupt name. This can be simplified by registering it with dev_name() instead. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-24Merge remote-tracking branches 'asoc/topic/samsung' and 'asoc/topic/wm8750' ↵Mark Brown
into asoc-next
2014-12-24Merge remote-tracking branches 'asoc/topic/pxa', 'asoc/topic/rockchip', ↵Mark Brown
'asoc/topic/rt5670' and 'asoc/topic/rt5677' into asoc-next
2014-12-24Merge remote-tracking branches 'asoc/topic/dwc', 'asoc/topic/intel' and ↵Mark Brown
'asoc/topic/omap' into asoc-next
2014-12-24Merge remote-tracking branch 'asoc/topic/pcm512x' into asoc-nextMark Brown
2014-12-24Merge remote-tracking branch 'asoc/topic/pcm' into asoc-nextMark Brown
2014-12-24Merge remote-tracking branch 'asoc/topic/dapm' into asoc-nextMark Brown
2014-12-24Merge remote-tracking branches 'asoc/fix/dwc', 'asoc/fix/intel', ↵Mark Brown
'asoc/fix/rockchip' and 'asoc/fix/rt5677' into asoc-linus
2014-12-24Merge remote-tracking branch 'asoc/fix/dapm' into asoc-linusMark Brown
2014-12-24ASoC: rockchip: i2s: set TDL and RDL to 16 samplesJianqun Xu
Set Transmit Data Level(TDL) and Receive Data Level(RDL) to 16 samples. Without this setting, the TDL is default to be 0x00 (means 0 sample), and the RDL is default to be 0x1f (means 32 samples). Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-24ASoC: rockchip: i2s: fix maxburst of dma data to 4Jianqun Xu
Since RK3288 DMAC's burst length only support max to 4, here set maxburst of playback and capture dma data to 4. Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-24ASoC: rockchip: i2s: fix error defination of transmit data levelJianqun Xu
According to description about "Transmit Data Level", This bit field controls the level at which a DMA request is made by the transmit logic. It is equal to the watermark level. That is, the dma_tx_req signal is generated when the number of valid data entries in the TXFIFO (TXFIFO0 if CSR=00 TXFIFO1 if CSR=01 TXFIFO2 if CSR=10 TXFIFO3 if CSR=11) is equal to or below this field value. Different to receive data level, transmit data level does not need to "-1". Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-24ASoC: rt5677: Adjust the routing of "PLL1"Oder Chiou
Remove the duplicated PLL1 connections of the adc stereo filters, and remove the PLL1 connections of the DACs because the PLL1 should be connected to dac filters. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-24ASoC: rt5677: Add the ASRC supportOder Chiou
Add the ASRC support Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-24ASoC: rt5677: Revise the filter powersOder Chiou
Add the filter powers of the dac mono3 and mono4, and remove the connection of dac stereo1 filter that connect to DAC1 MIX. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-24ASoC: Intel: Store the entry_point read from FW fileJie Yang
To enable some modules from other than base FW, according to FW interface spec, we need pass the correct entry point param to FW, so here store the entry_point read from FW file for later usage. Signed-off-by: Jie Yang <yang.jie@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-24ASoC: Intel: correct the fixed free block allocationJie Yang
For block span more than 1 section, when allocate it from a free block, we need allocate the remain buffers within the block, and then continue alloc the rest of needed size buffer. Here also make sure this free block is moved from free list to used list, and add it to block_list which may be used for power gating disabling later. Signed-off-by: Jie Yang <yang.jie@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-24ASoC: pcm: Fix vague codec and cpu DAI prepare error messagesJarkko Nikula
Both codec and cpu DAI prepare print the same error message making it a bit more difficult to grep quickly from sources. Fix this by telling it explicitly. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-24ASoC: rt5677: fixed rt5677_dsp_vad_put rt5677_dsp_vad_get panicFang, Yang A
snd_kcontrol_chip should return snd_soc_component instead of snd_soc_codec Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22ASoC: rt5670: Keep sysclk on if JD func is usedBard Liao
System clock is necessary for rt5670 JD function. We assume system clock source will be set in machine driver. So there are two things left we should do in codec driver. 1. Set sysclk to codec internal clock in probe since machine driver may not do that before JD function is registered. 2. Power up PLL once sysclk source is switched to PLL. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22ASoC: rt5670: Add runtime PM supportBard Liao
This patch adds runtime PM support on rt5670 codec. Signed-off-by: Lin Mengdong <mengdong.lin@intel.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22ASoC: Intel: fix sparse non static symbol warningsWei Yongjun
Fixes the following sparse warnings: sound/soc/intel/sst/sst_acpi.c:248:5: warning: symbol 'sst_acpi_probe' was not declared. Should it be static? sound/soc/intel/sst/sst_acpi.c:335:5: warning: symbol 'sst_acpi_remove' was not declared. Should it be static? Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22ASoC: pcm512x: Also support PCM514x devicesPeter Rosin
Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22ASoC: Intel: Fix BYTCR machine driver MODULE_ALIASJarkko Nikula
snd_soc_sst_bytcr_dpcm_rt5640 doesn't autoload because MODULE_ALIAS doesn't match with "bytt100_rt5640" platform device. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22ASoC: Intel: Fix BYTCR firmware nameJarkko Nikula
BYTCR DSP firmware is in intel/ subdirectory. See linux-firmware.git commit d562a3b63632 ("linux-firmware: add sst audio firmware for baytrail platforms"). Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22ASoC: dwc: Iterate over all channelsAndrew Jackson
The Designware core can be configured with up to four stereo channels. Each stereo channel is individually configured so, when the driver's hw_params call is made, each requested stereo channel has to be programmed. Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22ASoC: dwc: Ensure FIFOs are flushed to prevent channel swapAndrew Jackson
Flush the FIFOs when the stream is prepared for use. This avoids an inadvertent swapping of the left/right channels if the FIFOs are not empty at startup. Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2014-12-22ASoC: dwc: Reorder code in preparation for DT supportAndrew Jackson
Move code that configures the DAI and DMA into a separate function. This reduces the size of the dw_i2s_probe function and will make it easier to add support for device tree to the driver. Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22ASoC: dwc: Remove unnecessary debug messages and testsAndrew Jackson
The devm_XXX allocation functions print a message on failure, so additional messages are not required. Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22ASoC: rt5670: set platform data by dmiBard Liao
This patch set specific data according to dmi data. Signed-off-by: Jin, Yao <yao.jin@intel.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-16 23:29:54 +0000