summaryrefslogtreecommitdiffstats
path: root/sound/usb
AgeCommit message (Collapse)Author
2008-10-10ALSA: usb-audio: dynamic detection of MIDI interfaces in uaxx-quirkPedro Lopez-Cabanillas
The MIDI interfaces have to be detected dynamically for Edirol devices ua-700, ua-25 and ua4-fx. This patch reverses the wrong changes made by my other patch in uaxx-quirk. Signed-off-by: Pedro Lopez-Cabanillas <pedro.lopez.cabanillas@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: snd-usb-audio: support for Edirol UA-4FX devicePedro Lopez-Cabanillas
Renamed the old quirk function for ua-700/ua-25 to become more generic, moving the MIDI interfaces to the quirk data header. Added a new quirk for the Edirol UA-4FX. Signed-off-by: Pedro Lopez-Cabanillas <pedro.lopez.cabanillas@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: usb - Fix possible Oops at USB-MIDI disconnectionTakashi Iwai
The endpoints should be released immediately at disconnection rather than the delayed release. This could be a reason of Oops at USB-audio device disconnection being used. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: usb-audio: add support for E-Mu Tracker PreEran Tromer
Add support for the E-Mu "Tracker Pre" USB sound card, following the example of the (very similar) E-Mu 0202 and E-Mu 0404 USB. As with the 0202 and 0404 USB, functionality is very limited: just a couple of sample rates, no volume/mute control, etc. Signed-off-by: Eran Tromer <eran@tromer.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: us122l - Add missing dependency on CONFIG_SND_HWDEPRandy Dunlap
CONFIG_SND_USB_US122L uses snd_hwdep_new(), so SND_HWDEP needs to be enabled (selected). ERROR: "snd_hwdep_new" [sound/usb/usx2y/snd-usb-us122l.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-15ALSA: usb-audio - Add ignore_ctl_error parameterTakashi Iwai
Added the ignore_ctl_error parameter to enable/disable the control-error handling for mixer interfaces. It was a hard-coded ifdef, and now you can change it more easily. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13ALSA: Kill snd_assert() in other placesTakashi Iwai
Kill snd_assert() in other places, either removed or replaced with if () with snd_BUG_ON(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: snd_usb_audio: fix SB Extigy IR Remote regressionPhillip Michael Jordan
The support for the SB Extigy's remote seems to be broken in all recent ALSA versions, including 1.0.17. The driver detects the event correctly, then submits a URB to query the RC code. On the Extigy, the URB is submitted with a length of 2 bytes. My hardware, however, only replies with 1 byte, containing the correct RC button code. The current implementation discards this as being too short. (line 1784 of usbmixer.c) This patch specifies a "minimum packet length" in the remote control configuration. I've left the values for the Audigy 2/Live! the same as the packet length, as I'm assuming the existing code works with them. (I don't have the hardware to confirm) This fixes the Extigy RC support, e.g. for use with Lirc. Signed-off-by: Phillip Michael Jordan <phil@philjordan.eu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-01ALSA: Add USB US122L driverKarsten Wiese
Added a new US122L usb-audio driver. This driver works together with a dedicated alsa-lib plugin. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-28ALSA: usb-audio: add BOSS GT-10 supportClemens Ladisch
Add a quirk entry for the BOSS GT-10. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-07-10ALSA: usb-audio: add some Yamaha USB MIDI quirksClemens Ladisch
Add quirk entries for four Yamaha USB MIDI devices. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-07-10ALSA: usb-audio: fix Yamaha KX quirkClemens Ladisch
We have to restrict the quirk to interface 0 because the second interface is not MIDI but HID. Additionally, this product ID is used by all four KX models, so it is better to read the product name from the device. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-07-10ALSA: Add Yamaha KX49 (USB MIDI controller) to usbquirks.hRichard Chan
This patch is for the Yamaha USB MIDI controller KX49. http://www.yamahasynth.com/products/kx/index.html It has a 3-port MIDI interface and an HID interface (it has a tiny keyboard subset). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-06[ALSA] usbaudio.c: remove #ifndef CONFIG_USB_EHCI_SPLIT_ISO codeAdrian Bunk
Since USB_EHCI_SPLIT_ISO is now unconditionally enabled the #ifndef CONFIG_USB_EHCI_SPLIT_ISO became wrong. Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-27sound: Convert to menuconfigTakashi Iwai
Convert menu in sound Kconfig files to menuconfig and if. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-27[ALSA] usb-audio - Support for Roland SonicCell sound moduleChris Mennie
Added entry into usbquirks.h to recognize Roland SonicCell sound module by mostly duplicating the entry for the Roland SH-201. USB MIDI works just fine, though the USB audio is a little unreliable (but still works well enough). Signed-off-by: Chris Mennie <camennie@alumni.uwaterloo.ca> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-19[ALSA] snd_usb_caiaq: add support for 'Session I/O' interfaceDaniel Mack
This patch adds suport for Native Instruments new 'Guitar Rig Session I/O' audio hardware. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-21caiaq endianness fixAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-24[ALSA] usb-audio - Fix race in reconnectionTakashi Iwai
Fix the race at reconnection of the device. The disconnected usb_chip[] must be cleared before the next probe call properly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] snd_usb_caiaq: make high sample rates work with A8DJDaniel Mack
This patch for snd_usb_caiaq makes sample rates higher dann 48KHz work with devices which have more than 2 stereo input/output pairs. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] snd_usb_caiaq: correct input channel orderDaniel Mack
This patch corrects the input channel order of hardware supported by snd_usb_caiaq. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] snd_usb_caiaq: fix potential lockups lockingDaniel Mack
This patch fixes potential lockups in snd_usb_caiaq by refining the locking mechanims and by using usb_kill_urb() in favor to usb_unlink_urb(). Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] sound/usb/usbaudio.c: coding stylePavel Machek
Putting space between ! and variable is a strange coding style, fix that, also make it fit into 80 columns where that is easy. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] usb audio: make quirk handling more readable, and fix commented-out codePavel Machek
usb audio contains useful debugging code, protected by #if 0. Unfortunately, it will not compile because variable names changed; fix it. Dallas workaround is formatted in a way where it is not quite obvious what is normal code and what is quirk. Reformat it to make it obvious. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] usb audio: Fix another Dallas quirkPavel Machek
Dallas USB speakers are buggy in more than one way. One of configs they offer does not work at all. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] usb-audio - Add a proper error checkTakashi Iwai
The error in check_hw_params_convention() has to be checked and handled properly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] usb-audio: sort quirks listClemens Ladisch
Move some entries to their proper position so that the list is again sorted by vendor/product ID. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-03-10USB: usbaudio: handle kcalloc failureJim Meyering
sound/usb/usbaudio.c (check_hw_params_convention): Handle kcalloc failure. Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-29[ALSA] usb-audio: add workaround for broken E-Mu frequency feedbackClemens Ladisch
Add a workaround for the feedback pipe of E-Mu 0202/0404 USB devices that reports the number of samples per packet instead of the number of samples per microframe. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-02-22[ALSA] caiaq - fix section mismatch warningSam Ravnborg
Fix following warning: WARNING: vmlinux.o(.text+0x11ec01a): Section mismatch in reference from the function setup_card() to the function .devinit.text:snd_usb_caiaq_control_init() setup_card() are only used by init_card(). init_card() are only used by snd_probe() snd_probe() are used for the .probe parameter in usb_driver.probe Annotate them all __devinit to fix the warning. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-22[ALSA] race between disconnect and error handling in usbmidiTakashi Iwai
The driver resubmits URBs from an error handler and schedules the error handler from the URBs' completion handlers. To reliably kill the cycle a flag must be used. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-04vm audit: add VM_DONTEXPAND to mmap for drivers that need itNick Piggin
Drivers that register a ->fault handler, but do not range-check the offset argument, must set VM_DONTEXPAND in the vm_flags in order to prevent an expanding mremap from overflowing the resource. I've audited the tree and attempted to fix these problems (usually by adding VM_DONTEXPAND where it is not obvious). Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-31[ALSA] usb/caiaq: decrease period_bytes_minDaniel Mack
This patch decreases the snd_pcm_hardware->period_bytes_min field in the caiaq/usb audio driver. The hardware can actually handle as few as 128 bytes, depending on the system. So it makes no sense to keep applications from actually using such values. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] sound: fix caiaq section mismatchesRandy Dunlap
Fix section mismatch in caiaq: these __devinit functions can be called at any time so they should not be __devinit. WARNING: vmlinux.o(.text+0x10a8dae): Section mismatch: reference to .init.text:snd_usb_caiaq_audio_init (between 'setup_card' and 'create_card') WARNING: vmlinux.o(.text+0x10a8dd6): Section mismatch: reference to .init.text:snd_usb_caiaq_midi_init (between 'setup_card' and 'create_card') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] Remove sound/driver.hTakashi Iwai
This header file exists only for some hacks to adapt alsa-driver tree. It's useless for building in the kernel. Let's move a few lines in it to sound/core.h and remove it. With this patch, sound/driver.h isn't removed but has just a single compile warning to include it. This should be really killed in future. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] sound/usb/usbaudio.c: fix build with CONFIG_PM=nAndrew Morton
sound/usb/usbaudio.c: In function 'usb_audio_suspend': sound/usb/usbaudio.c:3674: error: implicit declaration of function 'snd_pcm_sus\pend_all' Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] usb-audio: add UR-80 PCM quirkClemens Ladisch
Add a quirk entry to handle Edirol UR-80 audio I/O. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] usb audio suspend supportOliver Neukum
This patch implements suspend/resume support for USB audio devices. It works with the microphone in my camera. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] alsa: usx2y nopageNick Piggin
Convert alsa usx2y driver from nopage to fault. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] usb-caiaq - add support for Kore controller 2Daniel Mack
Added support for Native Instrument's Kore controller 2. This device has no audio but MIDI, input devices and ALSA controllers only. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] caiaq - remove ifdefTakashi Iwai
Remove ifdef and fix Makefile for conditional builds. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] caiaq - add control API and more input featuresDaniel Mack
- added support for all input controllers on Native Instrument's 'Kore controller'. - added ALSA controls to switch LEDs on 'RigKontrol 2', 'RigKontrol3', 'Audio Kontrol 1' and 'Kore controller'. - added ALSA controls to switch input mode, software lock and ground lift features on 'Audio 8 DJ'. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] caiaq - input device support must depend on CONFIG_INPUTDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] caiaq - misc input handling fixesDmitry Torokhov
- link input device with its parent so that it placed in proper spot in sysfs hierarchy - drivers that allow changing their keymaps should use private copy of the keymap so that one instance of a device does not affect another instance - it is preferred for drivers to properly set up input_dev->phys to help userspace locate devices - drivers should use usb_to_input_id(), or perform endianess conversion, themselves, otherwise ID is not correct on big-endian boxes - whitespace and formatting cleanup Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] caiaq - Fix indent in KconfigTakashi Iwai
Fix indent of caiaq in Kconfig to the same level as others. Just a tidy up. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] usb-audio - SB Live24-External better handlingTimofei Bondarenko
This patch improves support for 'SB Live 24-bit Extarnal' USB card. 1) This card can go into muted state when a headphones connected or disconnected. So notify mixer about changes in headphone jack. 2) Add LED controls and procfs support just as in similar Audigy 2 NX card. 3) Rename 'PCM Capture' conrol to 'Mic Capture' to reflect reality: the card may adjust microphone input level only. Signed-off-by: Timofei Bondarenko <tim@ipi.ac.ru> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-23[ALSA] usb-audio: Another USB mic quirk for Logitech Communicator webcamDawid Wrobel
The patch adds the USB microphone quirk for Logitech Communicator (046d:08f5 Logitech, Inc.) webcam. Signed-off-by: Dawid Wrobel <dawid@klej.net> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-19get rid of input BIT* duplicate definesJiri Slaby
get rid of input BIT* duplicate defines use newly global defined macros for input layer. Also remove includes of input.h from non-input sources only for BIT macro definiton. Define the macro temporarily in local manner, all those local definitons will be removed further in this patchset (to not break bisecting). BIT macro will be globally defined (1<<x) Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: <dtor@mail.ru> Acked-by: Jiri Kosina <jkosina@suse.cz> Cc: <lenb@kernel.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Cc: <perex@suse.cz> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: <vernux@us.ibm.com> Cc: <malattia@linux.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16[ALSA] usb-audio - Fix double commentTakashi Iwai
Remove superfluous comment line (maybe a merge failure). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16[ALSA] snd-usb-audio: Add basic support for E-Mu USB devices.James Courtier-Dutton
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-28 11:17:08 +0000