summaryrefslogtreecommitdiffstats
path: root/sound/usb
AgeCommit message (Collapse)Author
2012-02-22ALSA: snd-usb-caiaq: Fix the return of XRUNMark Hills
Commit 3702b08 added a lock, but did not account for the case of SNDRV_PCM_POS_XRUN, which would get immediately overwritten. This could be bundled into one if-else-if statement, but the goto helps to clarify the 'exceptional' case. Thanks to Andreas Pape for spotting this. Signed-off-by: Mark Hills <mark@pogo.org.uk> Acked-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-15ALSA: usb-audio: avoid integer overflow in create_fixed_stream_quirk()Xi Wang
A malicious USB device could feed in a large nr_rates value. This would cause the subsequent call to kmemdup() to allocate a smaller buffer than expected, leading to out-of-bounds access. This patch validates the nr_rates value and reuses the limit introduced in commit 4fa0e81b ("ALSA: usb-audio: fix possible hang and overflow in parse_uac2_sample_rate_range()"). Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-08ALSA: usb-audio: add Edirol UM-3G supportClemens Ladisch
Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (526 commits) ASoC: twl6040 - Add method to query optimum PDM_DL1 gain ALSA: hda - Fix the lost power-setup of seconary pins after PM resume ALSA: usb-audio: add Yamaha MOX6/MOX8 support ALSA: virtuoso: add S/PDIF input support for all Xonars ALSA: ice1724 - Support for ooAoo SQ210a ALSA: ice1724 - Allow card info based on model only ALSA: ice1724 - Create capture pcm only for ADC-enabled configurations ALSA: hdspm - Provide unique driver id based on card serial ASoC: Dynamically allocate the rtd device for a non-empty release() ASoC: Fix recursive dependency due to select ATMEL_SSC in SND_ATMEL_SOC_SSC ALSA: hda - Fix the detection of "Loopback Mixing" control for VIA codecs ALSA: hda - Return the error from get_wcaps_type() for invalid NIDs ALSA: hda - Use auto-parser for HP laptops with cx20459 codec ALSA: asihpi - Fix potential Oops in snd_asihpi_cmode_info() ALSA: hdsp - Fix potential Oops in snd_hdsp_info_pref_sync_ref() ALSA: hda/cirrus - support for iMac12,2 model ASoC: cx20442: add bias control over a platform provided regulator ALSA: usb-audio - Avoid flood of frame-active debug messages ALSA: snd-usb-us122l: Delete calls to preempt_disable mfd: Put WM8994 into cache only mode when suspending ... Fix up trivial conflicts in: - arch/arm/mach-s3c64xx/mach-crag6410.c: renamed speyside_wm8962 to tobermory, added littlemill right next to it - drivers/base/regmap/{regcache.c,regmap.c}: duplicate diff that had already come in with other changes in the regmap tree
2012-01-11ALSA: usb-audio: add Yamaha MOX6/MOX8 supportClemens Ladisch
Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-09ALSA: usb-audio - Avoid flood of frame-active debug messagesTakashi Iwai
With some buggy devices, the usb-audio driver may give "frame xxx active" kernel messages too often. Better to keep it as debug-only using snd_printdd(), and also add the rate-limit for avoiding floods. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=738681 Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-09ALSA: snd-usb-us122l: Delete calls to preempt_disableKarsten Wiese
They are not needed here. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: stable@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-08ALSA: usb-audio: fix possible hang and overflow in ↵Xi Wang
parse_uac2_sample_rate_range() A malicious USB device may feed in carefully crafted min/max/res values, so that the inner loop in parse_uac2_sample_rate_range() could run for a long time or even never terminate, e.g., given max = INT_MAX. Also nr_rates could be a large integer, which causes an integer overflow in the subsequent call to kmalloc() in parse_audio_format_rates_v2(). Thus, kmalloc() would allocate a smaller buffer than expected, leading to a memory corruption. To exploit the two vulnerabilities, an attacker needs physical access to the machine to plug in a malicious USB device. This patch makes two changes. 1) The type of "rate" is changed to unsigned int, so that the loop could stop once "rate" is larger than INT_MAX. 2) Limit nr_rates to 1024. Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-06Merge branch 'driver-core-next' into Linux 3.2Greg Kroah-Hartman
This resolves the conflict in the arch/arm/mach-s3c64xx/s3c6400.c file, and it fixes the build error in the arch/x86/kernel/microcode_core.c file, that the merge did not catch. The microcode_core.c patch was provided by Stephen Rothwell <sfr@canb.auug.org.au> who was invaluable in the merge issues involved with the large sysdev removal process in the driver-core tree. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-19ALSA: module_param: make bool parameters really boolRusty Russell
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-12-12ALSA: snd-usb: added VOX ToneLab ST midi handlingSergiusz Urbaniak
Signed-off-by: Sergiusz Urbaniak <sergiusz.urbaniak@googlemail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-29ALSA: usb-audio - Support for Roland GAIA SH-01 SynthesizerJohn F Leach
Added table quirks entry for Roland GAIA SH-01 Synthesizer based upon Roland SH-201 table entry as template. USB MIDI and audio was tested with Muse and Audacity. Signed-off-by: John F Leach <jfleach@jfleach.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-18USB: convert sound/* to use module_usb_driver()Greg Kroah-Hartman
This converts the drivers in sound/* to use the module_usb_driver() macro which makes the code smaller and a bit simpler. Added bonus is that it removes some unneeded kernel log messages about drivers loading and/or unloading. Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Daniel Mack <zonque@gmail.com> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: Torsten Schenk <torsten.schenk@zoho.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Karsten Wiese <fzu@wemgehoertderstaat.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-10ALSA: usb-audio: Use kmemdup rather than duplicating its implementationThomas Meyer
Use kmemdup rather than duplicating its implementation The semantic patch that makes this change is available in scripts/coccinelle/api/memdup.cocci. Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-09ALSA: snd_usb_audio: add Logitech HD Webcam c510 to quirk-384Alexey Fisher
Logitech HD Webcam c510 provide wrong mixer resolution. Add it to "res = 384" quirk. Signed-off-by: Alexey Fisher <bug-track@fisher-privat.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-08ALSA: usb-audio - Fix the missing volume quirks at delayed initTakashi Iwai
In the recent usb-audio driver, the initialization of volume ranges may be delayed when the device doesn't respond well at the probing time. But the volume quirks for certain devices are applied only in mixer_ctl_feature_info() thus only at the very first probe and will be missing when the volume range is initialized later. This patch moves the volume quirk code to be always called from the volume-range extraction (get_min_max()), so that the quirks are properly applied in the later init time. Reported-and-tested-by: Alexey Fisher <bug-track@fisher-privat.net> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Revert the check of NO_PRESENCE pincfg default bit ALSA: hda - Fix a regression for DMA-position check with CA0110 ALSA: hda - Fix silent output regression with ALC861 ALSA: control: remove compilation warning on 32-bit ALSA: ua101: fix crash when unplugging
2011-11-06ALSA: ua101: fix crash when unpluggingClemens Ladisch
If the device is unplugged while running, it is possible for a PCM device to be closed after the disconnect callback has returned. This means that kill_stream_urb() and disable_iso_interface() would try to access already-invalid or freed USB data structures. The function free_usb_related_resources() was intended to prevent this, but forgot to clear the affected variables. Reported-and-tested-by: Olivier Courtay <olivier@courtay.org> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: 2.6.33+ <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-31sound: Add module.h to the previously silent sound usersPaul Gortmaker
Lots of sound drivers were getting module.h via the implicit presence of it in <linux/device.h> but we are going to clean that up. So fix up those users now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31sound: add moduleparam.h to users of module_param/MODULE_PARM_DESCPaul Gortmaker
These files were getting access to these two via the implicit presence of moduleparam.h everywhere. But that is being fixed, so get these guys what they need in advance. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (549 commits) ALSA: hda - Fix ADC input-amp handling for Cx20549 codec ALSA: hda - Keep EAPD turned on for old Conexant chips ALSA: hda/realtek - Fix missing volume controls with ALC260 ASoC: wm8940: Properly set codec->dapm.bias_level ALSA: hda - Fix pin-config for ASUS W90V ALSA: hda - Fix surround/CLFE headphone and speaker pins order ALSA: hda - Fix typo ALSA: Update the sound git tree URL ALSA: HDA: Add new revision for ALC662 ASoC: max98095: Convert codec->hw_write to snd_soc_write ASoC: keep pointer to resource so it can be freed ASoC: sgtl5000: Fix wrong mask in some snd_soc_update_bits calls ASoC: wm8996: Fix wrong mask for setting WM8996_AIF_CLOCKING_2 ASoC: da7210: Add support for line out and DAC ASoC: da7210: Add support for DAPM ALSA: hda/realtek - Fix DAC assignments of multiple speakers ASoC: Use SGTL5000_LINREG_VDDD_MASK instead of hardcoded mask value ASoC: Set sgtl5000->ldo in ldo_regulator_register ASoC: wm8996: Use SND_SOC_DAPM_AIF_OUT for AIF2 Capture ASoC: wm8994: Use SND_SOC_DAPM_AIF_OUT for AIF3 Capture ...
2011-10-26Merge branch 'topic/misc' into for-linusTakashi Iwai
2011-10-13ALSA: usb-audio - Fix possible access over audio_feature_info[] arrayTakashi Iwai
The audio_feature_info[] array should contain all entries for UAC2_FU_*, but currently a few last entries are missing. Even though, the driver tries to probe these entries in parse_audio_feature_unit() and may access the range over the array. This patch fixes the bug by limiting the loop size properly using ARRAY_SIZE() instead of a hard-coded magic number. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-13ALSA: snd-usb-caiaq: Add support for MaschineWilliam Light
This adds partial support for the Maschine controller by Native Instruments. Supported now are the 1x1 MIDI interface and the 41 buttons, 11 endless rotary encoders, and 16 pressure-sensitive drum pads. Still to work on are the dimmable LEDs and the two monochrome screens. Signed-off-by: William Light <wrl@illest.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-13ALSA: snd-usb-caiaq: Fix NULL dereference in input.cWilliam Light
There was a case where a newly-registered input device could be opened before a necessary variable in the device structure was set. When code tried to use the variable in the URB reply callback, it would cause an Oops. This fix sets the aforementioned variable before calling input_register_device. Signed-off-by: William Light <wrl@illest.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-07Merge branch 'pm-runtime' into pm-for-linusRafael J. Wysocki
* pm-runtime: PM / Tracing: build rpm-traces.c only if CONFIG_PM_RUNTIME is set PM / Runtime: Replace dev_dbg() with trace_rpm_*() PM / Runtime: Introduce trace points for tracing rpm_* functions PM / Runtime: Don't run callbacks under lock for power.irq_safe set USB: Add wakeup info to debugging messages PM / Runtime: pm_runtime_idle() can be called in atomic context PM / Runtime: Add macro to test for runtime PM events PM / Runtime: Add might_sleep() to runtime PM functions
2011-09-27ALSA: usb-audio: increase control transfer timeoutClemens Ladisch
There are certain devices that are reportedly so slow that they need more than 100 ms to handle control transfers. Therefore, increase the timeout in mixer(_quirks).c to 1000 ms. The timeout parameter of snd_usb_ctl_msg() is now constant, so we can drop it. Reported-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-26ALSA: usb-audio: Check for possible chip NULL pointer before clearing ↵Thomas Pfaff
probing flag Before clearing the probing flag in the error exit path, check that the chip pointer is not NULL. Signed-off-by: Thomas Pfaff <tpfaff@gmx.net> Cc: <stable@kernel.org> [2.6.39+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-23ALSA: usb-audio - clear chip->probing on error exitThomas Pfaff
The Terratec Aureon 5.1 USB sound card support is broken since kernel 2.6.39. 2.6.39 introduced power management support for USB sound cards that added a probing flag in struct snd_usb_audio. During the probe of the card it gives following error message : usb 7-2: new full speed USB device number 2 using uhci_hcd cannot find UAC_HEADER snd-usb-audio: probe of 7-2:1.3 failed with error -5 input: USB Audio as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.3/input/input6 generic-usb 0003:0CCD:0028.0001: input: USB HID v1.00 Device [USB Audio] on usb-0000:00:1d.1-2/input3 I can not comment about that "cannot find UAC_HEADER" error, but until 2.6.38 the card worked anyway. With 2.6.39 chip->probing remains 1 on error exit, and any later ioctl stops in snd_usb_autoresume with -ENODEV. Signed-off-by: Thomas Pfaff <tpfaff@gmx.net> Cc: <stable@kernel.org> [2.6.39+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-23ALSA: 6fire: don't use custom hex_to_bin()Andy Shevchenko
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-16ALSA: usb-audio: Added support for Roland UM-ONE midi-usb interfaceDaniele Guerrieri
Roland UM-ONE midi usb interface differs from Roland UM-1. Signed-off-by: Daniele Guerrieri <d.guerrieri@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-14ALSA: snd-usb: move code from urb.c to endpoint.cDaniel Mack
No code altered at this point, simply preparing for upcoming refactorizations. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-14ALSA: snd-usb: re-order codeDaniel Mack
Move code from endpoint.c into a new file called stream.c and rename functions so that their names actually reflect what they're doing. This way, endpoint.c will be available to functions that hold all the endpoint logic. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-14ALSA: snd-usb: re-order the MakefileDaniel Mack
Sort its entries in alphabetical order. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-12ALSA: usb: refine delay information with USB frame counterPierre-Louis Bossart
Existing code only updates the audio delay when URBs were submitted/retired. This can introduce an uncertainty of 8ms on the number of samples played out with the default settings, and a lot more when URBs convey more packets to reduce the interrupt rate and power consumption. This patch relies on the USB frame counter to reduce the uncertainty to less than 2ms worst-case. The delay information essentially becomes independent of the URB size and number of packets. This should help applications like PulseAudio which require accurate audio timing. Clemens Ladisch reported a decrease of mplayer's A-V difference from nrpacks down to at most 1ms. Thanks to Clemens for also pointing out that the implementation of frame counters varies between different HCDs. Only the 8 lowest-bits are used to estimate the delay. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> [clemens: changed debug code] Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-26ALSA: usb-audio: add Starr Labs USB MIDI supportKristian Amlie
Add support for Starr Labs USB MIDI devices such as the Z7S, which are based on an FTDI serial UART chip. Based on a patch by Daniel Mack. Signed-off-by: Kristian Amlie <kristian@amlie.name> Acked-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-19PM / Runtime: Add macro to test for runtime PM eventsAlan Stern
This patch (as1482) adds a macro for testing whether or not a pm_message value represents an autosuspend or autoresume (i.e., a runtime PM) event. Encapsulating this notion seems preferable to open-coding the test all over the place. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-19ALSA: usb-audio - Check the dB-range validity in the later read, tooTakashi Iwai
When the initial check of dB-range failed due to the read error, try to check again at the later read, too. When an invalid dB range is found, remove TLV flags and notify the mixer info change. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-19ALSA: usb-audio - Fix missing mixer dB informationTakashi Iwai
The recent fix for testing dB range at the mixer creation time seems to cause regressions in some devices. In such devices, reading the dB info at probing time gives an error, thus both dBmin and dBmax are still zero, and TLV flag isn't set although the later read of dB info succeeds. This patch adds a workaround for such a case by assuming that the later read will succeed. In future, a similar test should be performed in a case where a wrong dB range is seen even in the later read. Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
2011-08-14ALSA: snd_usb_caiaq: track submitted output urbsDaniel Mack
The snd_usb_caiaq driver currently assumes that output urbs are serviced in time and doesn't track when and whether they are given back by the USB core. That usually works fine, but due to temporary limitations of the XHCI stack, we faced that urbs were submitted more than once with this approach. As it's no good practice to fire and forget urbs anyway, this patch introduces a proper bit mask to track which requests have been submitted and given back. That alone however doesn't make the driver work in case the host controller is broken and doesn't give back urbs at all, and the output stream will stop once all pre-allocated output urbs are consumed. But it does prevent crashes of the controller stack in such cases. See http://bugzilla.kernel.org/show_bug.cgi?id=40702 for more details. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-and-tested-by: Matej Laitl <matej@laitl.cz> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-10ALSA: snd-usb-caiaq: Correct offset fields of outbound iso_frame_descDaniel Mack
This fixes faulty outbount packets in case the inbound packets received from the hardware are fragmented and contain bogus input iso frames. The bug has been there for ages, but for some strange reasons, it was only triggered by newer machines in 64bit mode. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-and-tested-by: William Light <wrl@illest.net> Reported-by: Pedro Ribeiro <pedrib@gmail.com> Cc: stable@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-10ALSA: usb-audio - Add quirk for BOSS Micro BR-80Kazutomo Yoshii
Signed-off-by: Kazutomo Yoshii <kazutomo.yoshii@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-06ALSA: snd-usb-caiaq: Fix keymap for RigKontrol3Daniel Mack
Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-by: Renato <naretobh@gmail.com> Cc: stable@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-06ALSA: snd-usb: Fix uninitialized variable usageDaniel Mack
Purely cosmetic, but fixes the following build warning. CC [M] sound/usb/quirks.o sound/usb/quirks.c: In function ‘snd_usb_apply_boot_quirk’: sound/usb/quirks.c:429:6: warning: ‘err’ may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-05ALSA: usb-audio - add quirk for Keith McMillen StringPortMiller Puckette
Signed-off-by: Miller Puckette <msp@ucsd.edu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-04ALSA: snd-usb: operate on given mixer interface onlyDaniel Mack
When creating the mixers for an USB audio device, the current code looks at the host interface stored in mixer->chip->ctrl_if. Change this and rather keep a local pointer to the interface that was given when snd_usb_create_mixer() was called. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-by: Nicolai Krakowiak <nicolai.krakowiak@gmail.com> Reported-by: Lean-Yves LENHOF <jean-yves@lenhof.eu.org> Acked-by: Clemens Ladisch <clemens@ladisch.de> Cc: stable@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-04ALSA: snd-usb: avoid dividing by zero on invalid inputNicolai Krakowiak
Signed-off-by: Nicolai Krakowiak <nicolai.krakowiak@gmail.com> Acked-by: Daniel Mack <zonque@gmail.com> Acked-by: Clemens Ladisch <clemens@ladisch.de> Cc: stable@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-04ALSA: snd-usb: Accept UAC2 FORMAT_TYPE descriptors with bLength > 6Clemens Ladisch
The Focusrite Scarlett 18i6 USB has them that way, which is probably a bug. Anyway, the driver should simply ignore this fact. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-by: Nicolai Krakowiak <nicolai.krakowiak@gmail.com> Cc: stable@kernel.org Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-21ALSA: usb-audio - Add quirk for Roland / BOSS BR-800David G Turner
Add support for Roland/BOSS BR-800 (0582:011e) to snd-usb-audio driver. This allows playback and recording, which has been tested and found to work. The third interface should be MIDI (MTC/SMPTE?) for DAW interface and is set as per ME-25, but this has not been tested. SDHC card access is already supported by usb-storage for Backup/Rhythm Editor/Wave Convertor mode which should not conflict with this. Signed-off-by: David G Turner <dgturner@iee.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>