summaryrefslogtreecommitdiffstats
path: root/sound
AgeCommit message (Collapse)Author
2011-01-12ASoC: DMIC codec: Adding a generic DMIC codecDavid Lambert
This codec is to be used by the DMIC driver to control the DMIC codec. This driver will be used on future implementations of the DMIC driver to support codec specific features. At this time, the codec driver just registers the codec DAI. Signed-off-by: David Lambert <dlambert@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-23ASoC: tlv320dac33: Add 32/24 bit audio supportPeter Ujfalusi
Add support for 24 bit audio (with S32_LE msbits 24). The reason to limit the msbits to 24, is that the FIFO can be configured for 16 or 24 bit layout. It is unknown how the codec would downsample from 32 to 24 bit, if the interface is configured to receive 32 bit data. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-23ASoC: tlv320dac33: Some cleanup for 32/24 bit supportPeter Ujfalusi
Change the structure of FIFO handling in order to pave the way for adding 32/24 bit audio support. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-23ASoC: tlv320dac33: Remove manual FIFO configurationPeter Ujfalusi
The manual FIFO configuration was the first version to enable the use of the FIFO in the codec. It had served it's purpose as debugging aid, but the automatic FIFO configuration is much safer to use. The removal of the manual controls, and configuration makes it easier to add new features for the codec later, since the manual mode neded different ways to calculate, and protect against misconfiguration. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-23ASoC: twl6040: Convert HF and HS drivers to use DAPM OUT_DRV widgetOlaya, Margarita
Make the phoenix HS and HF drivers use the new DAPM driver widget in order to guarantee power ON/OFF order sequence. Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-23ASoC: mcbsp: Add McBSP support for OMAP4Jorge Eduardo Candelaria
This patch adds McBSP support for the OMAP4 CPU Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com> Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-17Merge branch 'for-2.6.38' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into topic/asoc
2010-12-16ASoC: twl6040: Add ramp up/down volume for HS and HFMargarita Olaya Cabrera
Add ramp functions for the headset and handsfree outputs in order to reduce the pops during power on/off sequences. In order to give more control to volume ramp, step size and delay between steps can be specified. The patches are based on wm8350 implementation from Liam Girdwood. Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-15ASoC: twl6040: Set default gains to minimun valueOlaya, Margarita
Updated default values to improve power consumption. Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com> Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: twl6040: Use correct offset for LineInAmp RightMisael Lopez Cruz
Gain for LineInAmp Right uses LINEGAIN[5:3], which means that offset for right channel should be 4. Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: twl6040: Fix TLV dB step values for gainsOlaya, Margarita
Some gains were incorrectly configured for dB values. Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: twl6040: Increase timeout for power upJorge Eduardo Candelaria
After coming back from suspend, the timeout waiting for Phoenix chip to complete its power up sequence is not enough, which leaves the codec cache value for some registers in an outdated state. Increase the timeout value to wait for the power up sequence to correclty complete. Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com> Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: twl6040: Enable plug detection interruptsMisael Lopez Cruz
Enable plug detection interrupt mask in order to get headset PLUGINT/UNPLUGINT interrupts. Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: twl6040: Clear interrupt status at boot timeJorge Eduardo Candelaria
On Phoenix 1.1, the INTID register default value is an invalid one, causing the interrupt handler to think the phoenix power on sequence is ready before it actually finishes. This causes some i2c errors when trying to configure twl. Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com> Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: twl6040: Enable automatic power for phoenix 1.1Olaya, Margarita
Phoenix 1.1 supports automatic power on sequence, a verification is added to use it with new revision of the chip. Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: twl6040: Fix analog Mic L & R mux controlsFrancois Mazard
The mux control has 4 elements not 3 Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: twl6040: Support other sample rates.Olaya, Margarita
The twl6040 can support more sample rates other than 88.2 and 96k. Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: twl6040: Fix PCM error handling opsOlaya, Margarita
This patch moves all the PCM error handling for clock config out of trigger() and startup() and into prepare(). Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: twl6040: Restore bias level at resumeOlaya, Margarita
This patch restores the CODEC bias level at resume(). Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: twl6040: Add headset and handset mux controlsJorge Eduardo Candelaria
This patch adds support for the twl6040 headset and handset MUX controls. Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com> Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: twl6040: Modify the IRQ handlerOlaya, Margarita
Multiples interrupts can be received. The irq handler is modified to attend all of them. Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: twl6040: Update twl IO macroOlaya, Margarita
Update the codec to use the new twl core register macros Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: sdp4430: Add Jack supportJorge Eduardo Candelaria
Use jack framework to enable detection for the headset microphone and stereo output in the sdp4430. Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com> Signed-off-by: David Anders <x0132446@ti.com> Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: twl6040: Add jack support for headset and handsetJorge Eduardo Candelaria
This patch adds support for reporting twl6040 headset and handset jack events. The machine driver retrieves and report the status through twl6040_hs_jack_detect. A workq is used to debounce of the irq. Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com> Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: TWL4030: Fix 24bit supportPeter Ujfalusi
twl4030 series of codecs supports S32_LE with msbits=24. Replace the S24_LE with S32_LE format, and add constraint for 24msbit in case of 32 S32_LE format. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: soc-cache: A few minor stylistic changesDimitris Papastamos
Remove redundant parentheses/spaces in the use of the sizeof operator. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-14ASoC: Explicitly clear WM8993 ramp controls on power downMark Brown
This helps ensure that the ramp logic is reset when powering back up. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: dapm: Add output driver widgetOlaya, Margarita
In some cases it was not possible to follow the appropiate power ON/OFF sequence like in cases where the PGA needs to be enabled before the driver and disabled before the PGA for pop reduction. Add a widget to support output driver (speaker, haptic, vibra, etc) drivers where power ON/OFF ordering is important. Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-13ASoC: Fix AC'97 registration unwindMark Brown
soc_unregister_ac97_dai_link() takes a CODEC as an argument, not a rtd like the registration function, so give it what it's looking for. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-13ASoC: Fix build error caused by merging a fix for 2.6.37 into 2.6.38Jarkko Nikula
Fix "ASoC: Fix bias power down of non-DAPM codec" for 3.6.37 will cause a build error when merging into ASoC for-2.6.38. Fix the issue by doing a change that commit ce6120c "ASoC: Decouple DAPM from CODECs" would do. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-13Merge branch 'for-2.6.37' into for-2.6.38Mark Brown
2010-12-13ASoC: Fix bias power down of non-DAPM codecJarkko Nikula
Currently bias of non-DAPM codec will be powered down (standby/off) whenever there is a stream stop. This is wrong in simultaneous playback/capture since the bias is put down immediately after stopping the first stream. Fix this by using the codec->active count when figuring out the needed bias level after stream stop. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-13Merge branch 'topic/asoc' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 into for-2.6.38
2010-12-13ASoC: Fix merge errors with flush_scheduled_work() removalTakashi Iwai
delayed_work was moved to dapm in the commit ce6120cca2589ede530200c7cfe11ac9f144333c ASoC: Decouple DAPM from CODECs Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-13ASoC: Fix widgets for WM8994/58 AIF2 source controlMark Brown
The compiler really ought to have been warning about unreferenced variables... Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-13Merge branch 'topic/workq-update' into topic/asocTakashi Iwai
Conflicts: sound/soc/codecs/wm8350.c sound/soc/codecs/wm8753.c sound/soc/sh/fsi.c sound/soc/soc-core.c
2010-12-13sound: don't use flush_scheduled_work()Tejun Heo
flush_scheduled_work() is deprecated and scheduled to be removed. * cancel[_delayed]_work() + flush_scheduled_work() -> cancel[_delayed]_work_sync(). * wm8350, wm8753 and soc-core use custom code to cancel a delayed work, execute it immediately if it was pending and wait for its completion. This is equivalent to flush_delayed_work_sync(). Use it instead. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-11ASoC: Automatically manage WM8903 deemphasis rateMark Brown
Provide the user with a boolean control then automatically select the deemphasis filter most closely matching the sample rate. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-11ASoC: Remove open coded symmetry implementation from WM8903Mark Brown
We're already flagged as using symmetric rates so we don't need to have a custom implementation. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-11ASoC: Implement WM8903 oversampling rate controlsMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-11ASoC: Implement WM8903 high pass filter supportMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-10ASoC: tlv320dac33: Power down digital parts, when not neededPeter Ujfalusi
If the following scenario has been followed: 1. Enable analog bypass amixer sset 'Analog Left Bypass' on amixer sset 'Analog Right Bypass' on 2. Start playback aplay -fdat -d3 /dev/zero After the playback stopped (3 sec), and the soc timeout (5 sec), the digital parts of the codec will remain powered up. This means that the DAI clocks are continue to run, the oscillator remain operational, etc. Use the SND_SOC_DAPM_POST_PMD widget to get notification about the stopped stream, and power down the digital part of the codec. If the analog bypass is enabled, than the codec will remain in BIAS_ON level, and things will work correctly. In case, if the bypass is disabled, than the codec will fall to BIAS_STANDBY than to BIAS_OFF level, as it used to. The digital part of DAC33 is initialized at every stream start (DAPM_PRE:PRE_PMU event), so subsequent streams (within 5 sec) will have working DAI. When the codec is coming out from BIAS_OFF, the full power-up sequence followed by the same DAPM_PRE widget event will power up the digital part. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-10ASoC: Add HP iPAQ H1940 supportVasily Khoruzhick
Add glue driver to make s3c24xx-i2s and uda1380 produce some sound on H1940. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-10ASoC: Implement WM8994/58 DAC and ADC oversampling controlMark Brown
The oversampling rate of the DAC and ADC can be controlled to optimise for either low power consumption or maximum performance. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-10ASoC: Optimise WM9081 FLL performanceMario Becroft
Tune the FLL gain for optimal performance according to evaluation results. Signed-off-by: Mario Becroft <mb@gem.win.co.nz> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-09Merge branch 'for-2.6.37' into for-2.6.38Mark Brown
2010-12-09ASoC: EP93xx: sampling rate range extendedAlexander Sverdlin
Changes to both I2S and PCM code: - Rates list extended up to 96kHz, it's tested on EDB9302 and works for both capture and playback. Signed-off-by: Alexander Sverdlin <subaparts@yandex.ru> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-09ASoC: WM8580: Fix R8 initial valueSeungwhan Youn
Acc to WM8580 manual, the default value for R8 is 0x10, not 0x1c. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2010-12-09ASoC: fix deemphasis control in wm8904/55/60 codecsDmitry Artamonow
Deemphasis control's .get callback should update control's value instead of returning it - return value of callback function is used for indicating error or success of operation. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2010-12-09ASoC: sdp4430: Enable FM stereo pinsJorge Eduardo Candelaria
Add FM stereo pins to the machine driver and add them as a dapm widget. Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com> Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-02-23 07:28:22 +0000