summaryrefslogtreecommitdiffstats
path: root/sound
AgeCommit message (Collapse)Author
2008-09-23ALSA: hda - Add PCI subsystem ID for MacBookPro4,1David Woodhouse
This seems to work if I tell it that it's a mbp3. Not sure if there are actually any differences. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23ALSA: hda: SPDIF mux fixes for STAC927xMatthew Ranostay
Corrected bounds-checking in stac92xx_auto_create_mux_input_ctls() and added a spec->spdif_labels pointer for custom SPDIF mux labels for non-standard codec connections. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23sound: ASoC: Add WM8750 SPI supportMark Brown
Implement SPI support for WM8750, cut'n'pasting from the support for WM8731 contributed by Cliff Cai and Alan Horstmann since the wire format is the same for both codecs. Also fix a cut'n'pasted comment in the I2C side of the driver (which was clearly written in the same way) while we're at it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23sound: ASoC: DAPM support for ADC on WM9713 PCM interfaceMark Brown
The stereo ADC in the WM9713 can be used to produce data for both the standard AC97 interface and the additional voice PCM interface. Support use on both by defining virtual ADCs tied to each accepting the output from the actual ADCs. Reported-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23sound: ASoC: Fix dependency on AC97_BUSMark Brown
When built with AC97 support the ASoC core depends on AC97_BUS so force it to be available Kconfig. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23ALSA: HDA VIA: Replace buggy Mic BoostHarald Welte
VT1708S' Mic Boost should be hidden in hardware design according to some customers' requirements. However, in case of bugs, it has to be exhibited to normal users, so we need to: * open a software backdoor, which is disabled by default in hardware * re-write .tlv & .info, to indicate the actual necessary info, which we cannot get from amplifier's capabiliies Signed-off-by: Logan Li <LoganLi@viatech.com.cn> Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23ALSA: HDA VIA: Fix 2nd S/PDIF out functionHarald Welte
As it seems, the recently-sent patch for the 2nd S/PDIF (HDMI) output is not working with alsa-kernel 1.0.18rc3. This patch makes it work by * activating the second S/PDIF output pin in the pin config * consolidating the dig_playback_pcm_prepare() with extra_dig_pcm_prepare() functions * remove the need for an extra hda_pcm_stream structure and rather represents the second digital output as substream within the primary S/PDIF digital out stream. Signed-off-by: Logan Li <LoganLi@viatech.com.cn> Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23ALSA: HDA VIA: Fix crash on codecs without HeadphoneHarald Welte
Don't enumerate via_hp_mixer while hp_mux is null (headphone does not exist), to fix the crash of via_independent_hp_info (via_hp_mixer's .info), which will reference hp_mux. Signed-off-by: Logan Li <LoganLi@viatech.com.cn> Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23ALSA: Separate common pxa2xx-pcm codeDmitry Baryshkov
ASoC and non-ASoC drivers for PCM DMA on PXA share lots of common code. Move it to pxa2xx-lib. [Fixed some checkpatch warnings -- broonie] Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23ALSA: pxa2xx-ac97-lib: support building for several CPUsDmitry Baryshkov
Support building of pxa2xx-ac97-lib for several CPUs by making code run-time selected, not only compile-time. [Fixed 3XX->3xx typos in ifdef checks -- broonie.] Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23ALSA: Separate common pxa2xx-ac97 codeDmitry Baryshkov
ASoC and non-ASoC drivers for ACLINK on PXA share lot's of common code. Move all common code into separate module snd-pxa2xx-lib. [Fixed handing of SND_AC97_CODEC in Kconfig and some checkpatch warnings -- broonie] Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23sound: ASoC: Support runtime selection of CPU in pxa2xx-i2sDmitry Baryshkov
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23sound: ASoC: Add WM8971 CODEC driverKenneth Kiraly
The WM8971 is a low power, high quality stereo codec designed for portable digital audio applications. This driver was originally written by Kenneth Kiraly. While out of tree it has had updates to reflect current kernel APIs and coding standards from Graeme Gregory and Mark Brown. Signed-off-by: Kenneth Kiraly <kiraly@lab126.com> Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23ALSA: HDA: patch_analog: Quirk for Asus P5Q Premium/Pro boards.Robin H. Johnson
Use 6STACK_DIG for the AD2000BX variant of the AD1989B chip used by Asus on their Asus P5Q Premium and Pro boards. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23ALSA: HDA: patch_analog: Implement multiple outputs for AD1988Robin H. Johnson
Implement the slave_dig_outs for AD1989 cards. Untested due to lack of hardware. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23ALSA: HDA: hda_proc: Fix printf format specifierRobin H. Johnson
The Pincap output had a typod format specifier, leading to an extraneous "08" in the output, which is a reserved bit of the Vref field, and was really confused :-). Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23ALSA: HDA: hda_local: Less magic numbers.Robin H. Johnson
Explain some of the magic numbers I saw while trying to fix the AD1989 SPDIF issue. Maybe should just use the expanded form directly in the verbs? Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23ALSA: HDA: patch_analog: Fix SPDIF output on AD1989BRobin H. Johnson
The SPDIF pins for AD1989 are not enabled by default. Set OUT bit so that they actually work. Also initialize the HDMI SPDIF at the same time. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23ALSA: hda: 92hd73xx fixesMatthew Ranostay
Added support for defining the number of amps and the creation of the private_dimux dynamically for the 92hd73xx codec family. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> [Fixed a typo by tiwai] Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23ALSA: Fix section for snd-aica platform driverUwe Kleine-König
Don't use __init but __devinit to define probe function. A pointer to snd_aica_probe is passed to the core via platform_driver_register and so the function must not disappear after the module is loaded. Using __init and having HOTPLUG=y and SND_AICA=m the following probably oopses: echo -n AICA > /sys/bus/platform/driver/AICA/unbind echo -n AICA > /sys/bus/platform/driver/AICA/bind Strange enough add_aicamixer_controls which is only called by snd_aica_probe was already using __devinit. While at it move the remove function to .devexit.text section. Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23ALSA: hda: fixed hp_nid DAC for DELL_M6Matthew Ranostay
This patch sets the HP out not used by the "Headphone to Line Out" switch to the hp_nid. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23ALSA: hda: Input port AMP controlsMatthew Ranostay
Added support for controlling hardware gain amps on input ports using a volume control mixer with a mux selecting the port being controlled. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23ALSA: hda: Added a STAC_HP_M4 quirkMatthew Ranostay
Added a new quirk for STAC_HP_M4 series for an 92hd75xxx family laptop. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23ALSA: hda: fix oopses in snd-hda-intel after digital slave support additionsHerton Ronaldo Krzesinski
Many places fail to check if codec has slave_dig_outs entries (the most common case is not having any entry), leading to various possible oopses in hda_codec code. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23sound: ASoC: Fix WM8731 SPI writeAlan Horstmann
Ensure wm8731_spi_write byte order is consistent regardless of endianess. Signed-off-by: Alan Horstmann <gineera@aspect135.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-22ALSA: virtuoso: add Xonar HDAV1.3 supportClemens Ladisch
Add support for the Asus Xonar HDAV1.3 and the Xonar HDAV1.3 Deluxe. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22ALSA: oxygen: rename first PCM deviceClemens Ladisch
Rename the first PCM device from "Analog" to "Multichannel" because it can be used for HDMI output on the Xonar HDAV. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22ALSA: virtuoso: rename AC97 callback functionClemens Ladisch
Rename the callback function that switches between line and mic inputs on the Xonar D1 because it is also usable on other models. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22ALSA: virtuoso: make number of PCM1796 DACs configurableClemens Ladisch
Do not use a hardcoded number when iterating over the PCM1796 DACs to allow for cards with a different number of analog output channels. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22ALSA: virtuoso: allow I2C-connected PCM1796Clemens Ladisch
Add support for PCM1796 chips that are connected with an I2C bus instead of SPI. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22ALSA: oxygen: add self-documenting functionsClemens Ladisch
Introduce some trivial functions to better document the relationships of the various model callbacks. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22ALSA: oxygen: add UART I/O functionsClemens Ladisch
Add functions to allow model drivers to communicate with external chips by doing I/O with the not-used-for-MIDI UART. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22ALSA: oxygen: configure MIDI via device_configClemens Ladisch
To enable the MIDI port, model drivers must now set flags in device_config, not only in misc_flags. This allows model drivers to enable the UART without creating an ALSA MIDI device. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22ALSA: oxygen: rename pcm_dev_cfgClemens Ladisch
Rename the pcm_dev_cfg field to device_config because there will be additional flags that do not describe PCM devices. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22ALSA: virtuoso: create common functions for GPIO bit switch controlsClemens Ladisch
Factor out the common code of the mixer callbacks that handle controls that just switch a single GPIO bit. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22ALSA: virtuoso: handle D2X/DX dynamicallyClemens Ladisch
The Xonar D2X and DX are very similar to the D2 and D1, respectively, so we can handle the differences dynamically instead of using a separate model structure for each one. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22ALSA: oxygen: handle X-Meridian dynamicallyClemens Ladisch
Handle the differences between the X-Meridian and the other models in the probe callback instead of using a second model structure. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22ALSA: oxygen: remove X-Meridian magic numberClemens Ladisch
Introduce symbols that indicate the two models handled by the snd-oxygen driver, instead of using a magic number. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22ALSA: oxygen: add probe callbackClemens Ladisch
Add a probe callback to the model structure so that model-specific drivers can refine their model detection before the card is initialized. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22ALSA: oxygen: use a copy of the model structClemens Ladisch
Put a copy of the model structure into the chip structure so that model- specific drivers can modify it depending on a particular device instance. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22ALSA: oxygen: use SPDIF channel status symbolsClemens Ladisch
When setting the SPDIF channel status sample rate field, use the recently defined symbols instead of magic numbers. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-09ALSA: HDA patch_via.c: Second S/PDIF (HDMI) supportHarald Welte
The VT1702 and VT1708S have a second S/PDIF output which is used to connect to a HDMI transmitter. This patch adds support for it. Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: HDA patch_via.c: Independent DAC for headphoneHarald Welte
This mode allows an output stream to have two substreams, one for the speakers and one for the headphone. Each of the substreams has independent PCM data and uses a different DAC. Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: HDA patch_via.c: Mute on headphone plug-inHarald Welte
Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: HDA patch_via.c: Add VT1708S and VT1702 supportHarald Welte
The VT1702 and VT1708S codecs are new HDA codecs by VIA. This patch adds support for them to the patch_via.c file for HDA Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: HDA patch_via.c: Fix inversion of surround and side channelsHarald Welte
In the current driver, there is a consistent mistake between the SURROUND and the SIDE channels. This patch fixes it. Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: HDA patch_via.c: HP and CD pin connect configHarald Welte
Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: HDA patch_via.c: cleanupHarald Welte
* add extra parenthesis to make code more readable * use kzalloc() for alloc+zero rather than kcalloc() * ensure that AUTO_SEQ_* starts at 0 Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: fix section for sa11xx-uda1341 platform driverUwe Kleine-König
Don't use __init but __devinit to define probe function. A pointer to sa11xx_uda1341_probe is passed to the core via platform_driver_register and so the function must not disappear after the module is loaded. Using __init and having HOTPLUG=y and SND_SA11XX_UDA1341=m the following probably oopses: echo -n sa11xx_uda1341.1 > /sys/bus/platform/driver/sa11xx_uda1341/unbind echo -n sa11xx_uda1341.1 > /sys/bus/platform/driver/sa11xx_uda1341/bind Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Brian Avery <b.avery@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: hda - add missing slave_dig_outs for 92HD73bxxMatthew Ranostay
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-23 09:18:30 +0000