summaryrefslogtreecommitdiffstats
path: root/sound
AgeCommit message (Collapse)Author
2011-10-04ASoC: Avoid writing to WM8971_RESET in wm8971_resumeAxel Lin
Writing to WM8971_RESET resets all registers to the default state. Thus we should avoid writing to WM8971_RESET on resume. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04Merge branch 'for-3.1' into for-3.2Mark Brown
2011-10-04ASoC: wm8994: Fix setting rate_reg for wm8994-aif2Axel Lin
For wm8994-aif2, the rate_reg should be WM8994_AIF2_RATE. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-10-04ASoC: wm8995: Slightly optimize configure_clockAxel Lin
snd_soc_update_bits() will only write new register value if the old value is different from the new value. In additional, snd_soc_update_bits() returns 0 for no change. No need to read WM8995_CLOCKING_1 register before calling snd_soc_update_bits(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: wm8994: Slightly optimize configure_clockAxel Lin
snd_soc_update_bits() will only write new register value if the old value is different from the new value. In additional, snd_soc_update_bits() returns 0 for no change. No need to read WM8994_CLOCKING_1 register before calling snd_soc_update_bits(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: omap-pcm: Fix the no period wakeup implementationPeter Ujfalusi
After omap_request_dma the BLOCK_IRQ is enabled as default configuration for the channel. If we are requested for no period wakeup, we need to disable the BLOCK_IRQ in order to not receive any interrupts. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: wm8988: Use snd_soc_update_bits for read-modify-writeAxel Lin
Use snd_soc_update_bits for read-modify-write register access instead of open-coding it using snd_soc_read and snd_soc_write Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: wm8971: Use snd_soc_update_bits for read-modify-writeAxel Lin
Use snd_soc_update_bits for read-modify-write register access instead of open-coding it using snd_soc_read and snd_soc_write Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: wm8711: Use snd_soc_update_bits for read-modify-writeAxel Lin
Use snd_soc_update_bits for read-modify-write register access instead of open-coding it using snd_soc_read and snd_soc_write Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: max98095 codec: Catch driver bugs for biquad channel nameRyan Mallon
Move the biquad channel names to a separate array and iterate over it in max98095_get_bq_channel rather than duplicating the hardcoded channel names. Add an error message if an invalid channel is passed and check the error in the callers. Also added a BUILD_BUG_ON to ensure that the bq_mode_name and controls arrays are the same size. Signed-off-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: max98088 codec: Catch driver bugs for eq channel nameRyan Mallon
Move the EQ channel names to a separate array and iterate over it in max98088_get_channel rather than duplicating the hardcoded channel names. Add an error message if an invalid channel is passed and check the error in the callers. Also added a BUILD_BUG_ON to ensure that the eq_mode_name and controls arrays are the same size. Signed-off-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: Add WM1811 supportMark Brown
The WM1811 is mostly register compatible with the WM8994 and WM8958, providing a high performance audio hub CODEC in a small form factor suitable for ultra compact system designs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-03ASoC: Fix typo in 24.576MHz rate in WM5100Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-03ASoC: Instantiate DAPM widgets before we do the DAI link initMark Brown
The DAI init function may want to do something that needs the widgets to be instantiated. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-03ASoC: samsung: s3c-i2s-v2.c needs module.hAxel Lin
Include <linux/module.h> to fix below build error: CC sound/soc/samsung/s3c-i2s-v2.o sound/soc/samsung/s3c-i2s-v2.c:573: warning: data definition has no type or storage class sound/soc/samsung/s3c-i2s-v2.c:573: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' sound/soc/samsung/s3c-i2s-v2.c:573: warning: parameter names (without types) in function declaration sound/soc/samsung/s3c-i2s-v2.c:638: warning: data definition has no type or storage class sound/soc/samsung/s3c-i2s-v2.c:638: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' sound/soc/samsung/s3c-i2s-v2.c:638: warning: parameter names (without types) in function declaration sound/soc/samsung/s3c-i2s-v2.c:677: warning: data definition has no type or storage class sound/soc/samsung/s3c-i2s-v2.c:677: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' sound/soc/samsung/s3c-i2s-v2.c:677: warning: parameter names (without types) in function declaration sound/soc/samsung/s3c-i2s-v2.c: In function 's3c_i2sv2_register_dai': sound/soc/samsung/s3c-i2s-v2.c:736: warning: initialization discards qualifiers from pointer target type sound/soc/samsung/s3c-i2s-v2.c: At top level: sound/soc/samsung/s3c-i2s-v2.c:754: warning: data definition has no type or storage class sound/soc/samsung/s3c-i2s-v2.c:754: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' sound/soc/samsung/s3c-i2s-v2.c:754: warning: parameter names (without types) in function declaration sound/soc/samsung/s3c-i2s-v2.c:756: error: expected declaration specifiers or '...' before string constant sound/soc/samsung/s3c-i2s-v2.c:756: warning: data definition has no type or storage class sound/soc/samsung/s3c-i2s-v2.c:756: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' sound/soc/samsung/s3c-i2s-v2.c:756: warning: function declaration isn't a prototype make[3]: *** [sound/soc/samsung/s3c-i2s-v2.o] Error 1 make[2]: *** [sound/soc/samsung] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-03ASoC: samsung: WM8994 depends on MFD_WM8994Arnd Bergmann
Any driver that selects SND_SOC_WM8994 should also make sure that MFD_WM8994 is set, since the codec relies on the mfd code: sound/built-in.o: In function `wm8994_read': last.c:(.text+0x20160): undefined reference to `wm8994_reg_read' sound/built-in.o: In function `wm8994_write': last.c:(.text+0x20e68): undefined reference to `wm8994_reg_write' This solves the problem by selecting the MFD driver directly and adding extra 'depends on' statements to make sure that we respect the dependencies of that driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-03ASoC: Fix setting update bits for WM8741_DACRMSB_ATTENUATIONAxel Lin
After checking the code and datasheet, I think what we want in the second snd_soc_update_bits call is to update WM8741_DACRMSB_ATTENUATION register instead of WM8741_DACRLSB_ATTENUATION. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-03ASoC: txx9: Add __exit_p at necessary placeAxel Lin
We have __exit annotation for txx9aclc_generic_remove(), thus add __devexit_p to wrap it. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-03ASoC: Staticise ep93xx_ac97_daiAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-03ASoC: Staticise simtec_audio_resume()Axel Lin
It is exported via resume callback of struct dev_pm_ops rather than referenced directly and so should be staticised. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-03ASoC: Remove needless codec->dapm.bias_level assignment to SND_SOC_BIAS_OFFAxel Lin
This assignment is done by the snd_soc_register_codec so there is no need to redo it in probe function of a codec driver. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-02ASoC: sh: use correct __iomem annotationsArnd Bergmann
This removes a few unnecessary type casts and avoids sparse warnings. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-02ASoC: imx: eukrea_tlv320 needs i2cArnd Bergmann
Add a missing dependency that is required for random configurations. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-02ASoC: omap_mcpdm_remove cannot be __devexitArnd Bergmann
omap_mcpdm_remove is used from asoc_mcpdm_probe, which is an initcall, and must not be discarded when HOTPLUG is disabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-02ASoC: Remove unused srate variable in tegra_spdif_hw_paramsAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-02ASoC: Remove unused rate variable in magician_playback_hw_paramsAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-02ASoC: Staticise sh4_ssi_daiAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-02ASoC: Staticise samsung_spdif_daiAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-02ASoC: tegra: Staticise tegra_i2s_dai and tegra_spdif_daiAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-02ASoC: samsung: Add __devexit_p at necessary placesAxel Lin
According to the comments in include/linux/init.h: "Pointers to __devexit functions must use __devexit_p(function_name), the wrapper will insert either the function_name or NULL, depending on the confi options." Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Jaswinder Singh <jassi.brar@samsung.com> Cc: Ben Dooks <ben@simtec.co.uk> Cc: Seungwhan Youn <sw.youn@samsung.com> Cc: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-02ASoC: kirkwood-i2s: Add __devexit_p at necessary placeAxel Lin
According to the comments in include/linux/init.h: "Pointers to __devexit functions must use __devexit_p(function_name), the wrapper will insert either the function_name or NULL, depending on the config options." We have __devexit annotation for kirkwood_i2s_dev_remove(), thus add __devexit_p at necessary place. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-02ASoC: wm8782: Add __devexit_p at necessary placeAxel Lin
According to the comments in include/linux/init.h: "Pointers to __devexit functions must use __devexit_p(function_name), the wrapper will insert either the function_name or NULL, depending on the config options." We have __devexit annotation for wm8782_remove(), thus add __devexit_p at necessary place. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-02Merge branch 'for-3.1' into for-3.2Mark Brown
2011-10-02ASoC: omap: Use single hw_params callback in sdp3430 and zoom2Jarkko Nikula
There is no need to use two hw_params callbacks in sdp3430 and zoom2 as thet are now identical. Use instead the same snd_soc_ops structure and hw_params callback for both DAI links. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-02ASoC: omap: Convert bunch of machine drivers to use init time DAI formatJarkko Nikula
Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-02ASoC: omap-mcbsp: Prepare for init time DAI format settingJarkko Nikula
Before commit 75d9ac4 ("ASoC: Allow DAI formats to be specified in the dai_link") expectation for omap-mcbsp was that snd_soc_dai_set_fmt is to be called first in machine hw_params callback before other CPU DAI functions. Thus it was enough that only omap_mcbsp_dai_set_dai_fmt cleared the mcbsp->regs structure. [Note that this was pure convention, it's always been OK to set things on init -- broonie] Now this doesn't hold anymore since machine drivers can set the DAI format only once on init time and thus mcbsp->regs may get out of sync when other CPU DAI functions are modifying them dynamically with different values between the calls. Therefore clear the accessed mcbsp->regs bits and bitfields in other functions too. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-02ASoC: Fix setting update bits for WM8753_LADC and WM8753_RADCAxel Lin
Current code set update bits for WM8753_LDAC and WM8753_RDAC twice, but missed setting update bits for WM8753_LADC and WM8753_RADC. I think it is a copy-paste bug in commit 776065 "ASoC: codecs: wm8753: Fix register cache incoherency". Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-10-02ASoC: use a valid device for dev_err() in ZyloniteArnd Bergmann
A recent conversion has introduced references to &pdev->dev, which does not actually exist in all the contexts it's used in. Replace this with card->dev where necessary, in order to let the driver build again. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-09-30ASoC: tlv320aic3x: Use driver_data field of struct i2c_device_id to identify ↵Axel Lin
models Save model information in driver_data so we can simplify the implementation. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-30ASoC: twl6040: Simplify code in out_drv_event for pending work checkPeter Ujfalusi
Instead of checking, if the work is pending, it is safer to cancel the pending work, or wait till the scheduled work finishes. This way we can avoid modifying the variables used by the work function. Since we know that no work is pending, we can remove the two additional checks in POST_PMU, and PRE_PMD for non pending works. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-30ASoC: twl6040: Shift 2 identifies the HS output in out_drv_eventPeter Ujfalusi
None of the driver handled by out_drv_event have it's power bit shifted by 3. Remove the case for shift 3, and also add comment for the cases. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-30ASoC: twl6040: correct loop counters for HS/HF ramp codePeter Ujfalusi
The Headset gain range is 0 - 0xf (4 bit resolution) The Handsfree gain range is 0 - 0x1d (5 bit resolution, 0x1e, and 0x1f values are invalid) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-30ASoC: twl6040: One workqueue should be enoughPeter Ujfalusi
It is a bit overkill to have three (3) separate workqueue for a single driver. We can manage things with one workqueue nicely. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-30ASoC: omap-mcbsp: Fix FS polarity for LEFT_J, DSP_A and DSP_B formatsJarkko Nikula
Commit 75d9ac4 ("ASoC: Allow DAI formats to be specified in the dai_link") changed DAI format flag values and we cannot simply invert anymore e.g. frame-sync with ^= SND_SOC_DAIFMT_NB_IF (which was anyway misuse) as there is no anymore fixed bit position for bit-clock or frame-sync inversion. Fix this by relying only on DAI format flag values passed to us and by not making any assumption on individual bit positions. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-30ASoC: sn95031: Do not use static variable for channel_indexAxel Lin
No reason to use static variable for channel_index. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-30ASoC: Add missed regulator_unregister_notifier and regulator_bulk_free in ↵Axel Lin
wm8995_remove Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-30ASoC: Remove unused "control_data" field of struct aic3x_privAxel Lin
The control_data field is used to initialize the codec's control_data field, but since this is also done by the snd-soc-cache core, the redundant assignment can be removed and the field can be dropped. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-30ASoC: sdp4430: Fix string for FM input nameUjfalusi, Peter
The name contains invalid valid character (/), which causes problems when trying to create the debugfs directory structure: ASoC: Failed to create Aux/FM Stereo In debugfs file Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-30ASoC: Davinci: Fix FS polarity for I2S formatJarkko Nikula
Commit 75d9ac4 ("ASoC: Allow DAI formats to be specified in the dai_link") changed DAI format flag values and we cannot simply invert anymore e.g. frame-sync with ^= SND_SOC_DAIFMT_NB_IF (which was anyway misuse) as there is no anymore fixed bit position for bit-clock or frame-sync inversion. Fix this by relying only on DAI format flag values passed to us and by not making any assumption on individual bit positions Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Vaibhav Bedia <vaibhav.bedia@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-30ASoC: Remove unused "control_data" field of struct cs4271_privateAxel Lin
The control_data field is used to initialize the codec's control_data field, but since this is also done by the snd-soc-cache core, the redundant assignment can be removed and the field can be dropped. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-02-11 08:10:14 +0000