summaryrefslogtreecommitdiffstats
path: root/sound
AgeCommit message (Collapse)Author
2009-02-23ALSA: hda - Use snd_hda_codec_get_pincfg() in the rest placesTakashi Iwai
Replace with snd_hda_codec_get_pincfg() in the places where available. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-23ALSA: hdsp - whitespace cleanupTim Blechmann
Impact: remove trailing spaces Signed-off-by: Tim Blechmann <tim@klingt.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-23ALSA: hdsp - poll for ioboxTim Blechmann
sleeping for 2 seconds before checking for the iobox is not enough on some systems. this patch increases the timeout, but polls the card during that time. it thus speeds up the module loading when the card has already been initialized, while being more robust on systems, which require a higher timeout than the predefined 2 seconds. Signed-off-by: Tim Blechmann <tim@klingt.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-23Merge branch 'topic/hwdep-cleanup' into topic/hdspTakashi Iwai
2009-02-23Merge branch 'fix/hda' into topic/hdaTakashi Iwai
Conflicts: sound/pci/hda/patch_realtek.c
2009-02-23ALSA: hda - Quirk for Acer Aspire 6530GJuan Jesus Garcia de Soria
The Acer Aspire 6530G needs the 4930G "model" for the front mic to work properly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-23ALSA: hda - add another MacBook Pro 3,1 SSIDLuke Yelavich
Reference: Ubuntu bug #33245 https://bugs.launchpad.net/bugs/332456 Signed-off-by: Luke Yelavich <themuso@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-23ALSA: fix excessive background noise introduced by OSS emulation rate shrinkSteve Chen
Incorrect variable was used to get the next sample which caused S2 to be stuck with the same value resulting in loud background noise. Signed-off-by: Steve Chen <schen at mvista.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-23ALSA: ALS4000, slight mixer improvementsAndreas Mohr
- add 8kHz / 20 kHz low-pass filter switch control - add ALS4000 Mono capture route control - add annotations to specs pages - improve ALS4000 PM saved regs selection (remove SB dummy register, add missing ones) - add some missing ALS4000 register defines - constify two variables Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-23ALSA: aw2: do not grab every saa7146 based deviceAnssi Hannula
Audiowerk2 driver snd-aw2 is bound to any saa7146 device as it does not check subsystem ids. Many DVB devices are saa7146 based, so aw2 driver grabs them as well. According to http://lkml.org/lkml/2008/10/15/311 aw2 devices have the subsystem ids set to 0, the saa7146 default. Fix conflicts with DVB devices by checking for subsystem ids = 0 specifically. Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-23ALSA: hda - add support for "Maxdata Favorit 100XS" (Intel HDA/ALC260)Michael Schwingen
Signed-off-by: Michael Schwingen <michael@schwingen.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-22Merge branch 'linus' into x86/apicIngo Molnar
Conflicts: arch/x86/mach-default/setup.c Semantic conflict resolution: arch/x86/kernel/setup.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-22m68k: atari - Rename "mfp" to "st_mfp"Geert Uytterhoeven
http://kisskb.ellerman.id.au/kisskb/buildresult/72115/: | net/mac80211/ieee80211_i.h:327: error: syntax error before 'volatile' | net/mac80211/ieee80211_i.h:350: error: syntax error before '}' token | net/mac80211/ieee80211_i.h:455: error: field 'sta' has incomplete type | distcc[19430] ERROR: compile net/mac80211/main.c on sprygo/32 failed This is caused by | # define mfp ((*(volatile struct MFP*)MFP_BAS)) in arch/m68k/include/asm/atarihw.h, which conflicts with the new "mfp" enum in net/mac80211/ieee80211_i.h. Rename "mfp" to "st_mfp", as it's a way too generic name for a global #define. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-22ASoC: Only unregister drivers we registered for WM8753Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-22ASoC: Report I/O errors from WM8753 resetMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-20Merge branch 'x86/urgent' into x86/coreIngo Molnar
2009-02-20ALSA: hda - Remove codec-specific pin save/restore functionsTakashi Iwai
Replace the accessor to pin defaults with the common code for caching. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-20ALSA: hda - Remove IDT codec-specific pin save/restore functionsTakashi Iwai
Removed its own save/restore functions and replaced with the common code. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-20ALSA: hda - Remove realtek codec-specific pin save/restore functionsTakashi Iwai
Now it's done in the common code. Also use the common access functions for pin defaults. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-20ALSA: hda - Add generic pincfg initializationTakashi Iwai
Added the generic pincfg cache and save/restore functions. Also introduced the pin-overriding via hwdep sysfs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-20Merge branch 'fix/hda' into topic/hdaTakashi Iwai
2009-02-20ALSA: hda - Fix parse of init_verbs sysfs entryTakashi Iwai
Fixed the parse of init_verbs hwdep sysfs entry. Simplieied using sscanf. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-20sound: usb-audio: remove MIN_PACKS_URBClemens Ladisch
Remove the MIN_PACKS_URB symbol because other limits can force the number of packets down to one, regardless of the value of this symbol, and nobody has ever changed it anyway. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-20sound: virtuoso: increase minimum volume to -60 dBClemens Ladisch
Use -60 dB as the minimum value of the master volume mixer control. While the DACs would support ranges down to about -120 dB, such attenuations are not useful in practice. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-20sound: oxygen: handle AK5385 ADC on Claro halo cardsClemens Ladisch
The HT-Omega Claro halo's ADC is an AK5385 instead of a WM8785, so we should handle the ADC parameters as we do with the X-Meridian. Using the code for the wrong ADC does not seem to have any audible effects, and the Windows driver does it, but it is nonetheless a good idea to run the AK5385 with an oversampling ratio that is not outside the documented limits. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-20ALSA: pcxhr.h replace signed one-bit bitfieldsHarvey Harrison
The usage and comments make it clear values of 1/0 were intended rather than -1/0 Noticed by sparse: sound/pci/pcxhr/pcxhr.h:100:20: error: dubious one-bit signed bitfield sound/pci/pcxhr/pcxhr.h:101:22: error: dubious one-bit signed bitfield sound/pci/pcxhr/pcxhr.h:102:24: error: dubious one-bit signed bitfield sound/pci/pcxhr/pcxhr.h:103:21: error: dubious one-bit signed bitfield sound/pci/pcxhr/pcxhr.h:104:25: error: dubious one-bit signed bitfield sound/pci/pcxhr/pcxhr.h:105:20: error: dubious one-bit signed bitfield Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-19ASoC: Disable WM8731 line bypass by defaultMark Brown
This avoids temporarily enabling the ouput stages during startup which can cause audible effets in the output stages. Reported-by: Fredrik Redgård <rik@svep.se> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-19Merge branch 'fix/usb-audio' into for-linusTakashi Iwai
2009-02-19Merge branch 'fix/misc' into for-linusTakashi Iwai
2009-02-19Merge branch 'fix/hda' into for-linusTakashi Iwai
2009-02-19sound: oxygen: automatically restore overwritten EEPROMClemens Ladisch
If the EEPROM was partially overwritten (which seems to happen before the OS is booted), restore its entire contents by deducing it from the remaining information. This does not have any effect on the Linux driver, which works even with incomplete information in the EEPROM, but it makes other drivers work again. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-19sound: oxygen: handle cards with broken EEPROMClemens Ladisch
Under as yet unknown circumstances, the first word of the sound card's EEPROM gets overwritten. When this has happened, we cannot rely on the subsystem IDs that the kernel reads from the PCI configuration registers. Instead, we read the IDs directly from the EEPROM and do the ID matching manually. Because the model-specific driver cannot determine the model before calling oxygen_pci_probe(), that function now gets a get_model() callback as parameter. The customizing of the model structure, which was formerly done by the probe() callback, also has moved into get_model(). Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-19sound: oxygen: use static driver nameClemens Ladisch
When allocating resources, use a fixed name instead of reading it from the model structure. This allows us to allocate the resources before the actual model is known. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-19sound: oxygen: allocate model_data dynamicallyClemens Ladisch
Allocate the model-specific data dynamically instead of including it in the memory block of the card structure. This will allow us to determine the actual model after the card creation. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-19sound: oxygen: make the owner module a parameter of the probe functionClemens Ladisch
Move the owner field out of the oxygen_model structure and make it a parameter of oxygen_pci_probe(), because the actual owner module does not depend on the card model. Furthermore, moving it out of the model structure allows us to create the card structure before the actual model is known. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-19Merge branch 'topic/snd_card_new-err' into topic/oxygenTakashi Iwai
2009-02-19sound: virtuoso: revert "do not overwrite EEPROM on Xonar D2/D2X"Clemens Ladisch
This reverts commit 7e86c0e6850504ec9516b953f316a47277825e33 ("do not overwrite EEPROM on Xonar D2/D2X") because it did not actually help with the problem. More user reports show that the overwriting of the EEPROM is not triggered by using this driver but by installing Linux, and that the installation of any other operating system (even one without any CMI8788 driver) has the same effect. In other words, the presence of this driver does not have any effect on the occurrence of the error. (So far, the available evidence seems to point to a BIOS bug.) Furthermore, it turns out that the EEPROM chip is protected against stray write commands by the command format and by requiring a separate write-enable command, so the error scenario in the previous commit (that SPI writes can be misinterpreted as an EEPROM write command) is not even theoretically possible. The mixer control that was removed as a consequence of the previous commit can only be partially emulated in userspace, which also means it cannot be seen be the in-kernel OSS API emulation, so it is better to revert that change. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-19ALSA: hda - Add digital-only mode for ALC268Takashi Iwai
ALC268 can be configured as digital-only, e.g. for HDMI, on some machines. Allow the parser to set up the digital-only mode. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-19ALSA: hda - Avoid doubly beep attachment in patch_alc268()Takashi Iwai
Remove the doubly attachment in patch_alc268(). The input beep is attached conditionally only when needed. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-19ALSA: hda - Don't enable beep for digital-only ALC262Takashi Iwai
When ALC262 codec is configured as digital-only, it's meaningless to add the digital beep input. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-18ASoC: Add device init/exit annotations to new-style Wolfson CODEC driversMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-18ASoC: Check for errors when writing WM8731 reset registerMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-18ASoC: TWL4030: Add digital loopback supportPeter Ujfalusi
This patch adds the digital loopback/bypass support for twl4030 codec. The digital loopback will let the digimic0 (routed in the TX1 capture path inside of TWL4030) data to be routed back to the RX2 playback path (I2S stereo). It can also route the analog capture date routed through the TX1 back to RX2. Effectively the digital loopback is routing the audio from the TX1 capture path to the RX2 playback path. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-18ALSA: jack - Use card->shortname for input nameTakashi Iwai
Currently the jack layer refers to card->longname as a part of its input device name string. However, longname is often really long and way too ugly as an identifier, such as, "HDA Intel at 0xf8400000 irq 21". This patch changes the code to use card->shortname instead. The shortname string contains usually the h/w vendor and product names but without messy I/O port or IRQ numbers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-18ASoC: Implement SPI device unregistration for WM8731Mark Brown
Completely untested. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-18ASoC: Fix build for corgi and poodleMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-18ALSA: hda - Add quirk for Acer X3200Takashi Iwai
Acer X3200 needs model=auto, otherwise model=acer is pre-selected. Reference: Novell bnc#476268 https://bugzilla.novell.com/show_bug.cgi?id=476268 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-18ASoC: Remove version display from the WM8753 driverMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-18ASoC: Refactor WM8731 device registrationMark Brown
Move the WM8731 driver to use a more standard device registration scheme where the device can be registered independantly of the ASoC probe. As a transition measure push the current manual code for registering the WM8731 into the individual machine driver probes. This allows separate patches to update the relevant architecture files with less risk of merge issues. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-18ASoC: Shuffle WM8731 SPI and I2C device registrationMark Brown
This is a pure code motion patch intended to improve reviewability of a following patch moving WM8731 to use more standard device registration. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-16 13:52:07 +0000