summaryrefslogtreecommitdiffstats
path: root/sound
AgeCommit message (Collapse)Author
2008-01-31[ALSA] emu10k1 - Use enum for emu_model typesTakashi Iwai
Use enum instead of digits for emu_model types. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] emu10k1 - Don't create emu1010 controls for non-emu boardsTakashi Iwai
The last change for emu1616 introduced a bug that the driver creates emu1010-related controls even on non-emu boards. Fixed now. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] emu10k1 - 1616(M) cardbus improvementsCtirad Fertr
This patch improves E-Mu 1616(M) cardbus support. It adds definitions of the new Microdock and 1010 cardbus registers (thanks again for descriptions James) and improves mixer for this card. Now you can use S/PDIF and ADAT on Mirodock and also use headpohone output on host cardbus card as another independent output. Signed-off-by: Ctirad Fertr <c.fertr@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] snd:emu10k1: E-Mu updates. Fixes to firmware loading and support for ↵James Courtier-Dutton
0404. Signed-off-by: James Courtier-Dutton <James@superbug.co.uk> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: revert SPI clock frequency change for AK4396/WM8785Clemens Ladisch
While the AK4396 and WM8785 datasheets say that the SPI clock cycle length must be at least 200 ns, 320 ns seems not to work reliably with the controller, so we better use 160 ns. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] es1938 - improve capture hw pointer readsHermann Lauer
With the Solo1 (es1938) I got a lot of xrun's during capture on my machine. Tracing that down it seems to be comming from reading ocassionaly bad hw pointers from the chip. This patch uses more checking to avoid that false pointer reads. Failed reads are giving back the last good value read instead of spinning in a tight loop, which seems more appropriate to me in an interrupt. I think I saw this trick used in another driver Signed-off-by: Hermann Lauer <Hermann.Lauer@iwr.uni-heidelberg.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] HDA-Intel - Add support for Intel SCHTobin Davis
This patch adds support for Intel's SCH mobile chipset. Signed-off-by: Tobin Davis <tdavis@dsl-only.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda: Add GPIO mute support to STAC9205Matthew Ranostay
Support added for detecting HP jack presence via GPIO on several laptop docks. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Add Dell T3400 supportDouglas Kosovic
Added the support for Dell T3400 with AD1984 codec chip. ALSA bug#3699: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3699 Signed-off-by: Douglas Kosovic <douglask@itee.uq.edu.au> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Add model for HP DV9553EG laptopTakashi Iwai
Added the proper model for HP DV9553EG laptop with Cxt5045. ALSA bug#3534 https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3534 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Control SPDIF as slaveTakashi Iwai
Add SPDIF playback switch to the slave element list so that it can be toggled via the master control as well. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda_intel: ALSA HD Audio patch for Intel ICH10 DeviceID'sJason Gaston
This patch adds the Intel ICH10 HD Audio Controller DeviceID's. Signed-off-by: Jason Gaston <jason.d.gaston@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] Fix Oops with PCM OSS syncTakashi Iwai
The PCM OSS emulation can cause Oops at sync operation due to the wrong data size calculation. Typically happening on Sparc64: http://lkml.org/lkml/2008/1/24/426 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Add speaker automute to ALC262 HP modelsTakashi Iwai
Added the speaker-automute function to ALC262 HP models. Also, 'Mono' mixer elements are renamed as more intuitive 'Speaker'. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Add speaker automute to ALC260 HP modelsTakashi Iwai
Added the speaker-automute function to ALC260 HP models. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Fix ALC262 HP-RP5700 modelTakashi Iwai
Removed the PCM mixer elements conflicting with others. Also renamed Master control to Headphone, which isn't a real master. (The Master control is still created as a virtual master even after this rename.) Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Fix mixer controls with ALC262 HP T5735 modelTakashi Iwai
The PCM mixer elements in HP T5735 model of ALC262 codec conflict with Speaker and Headphone volumes. They should be removed. Ditto for LineOut that is identical with Speaker. Also, fixed/cleaned up the auto-mute callback to use the amp cache correctly. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Rename non-standard 'iSpeaker'Takashi Iwai
Renamed the non-standard mixer elements 'iSpeaker' to 'Speaker' in Realtek codecs. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Add SPDIF output support to AD1986a laptop-eapd modelTakashi Iwai
The SPDIF output on AD1986A laptop-eapd model is disabled although some Samsung laptops have SPDIF output. Enable it after checking the pin default config. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Add model for Gigabyte P35 DS3RJiang zhe
Signed-off-by: Jiang zhe <zhe.jiang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] virtuoso: monitor external power on D2XClemens Ladisch
On the Xonar D2X, monitor the GPIO pin that indicates whether external power is present. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: add front panel captureClemens Ladisch
When a second AC97 codec is present, add a PCM device for capturing from the front panel. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: add front panel controlsClemens Ladisch
Add mixer controls for the front panel AC97 codec. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: use AC97 interruptClemens Ladisch
After an AC97 register read or write, use the AC97 interrupt instead of polling to wait for the access to be completed. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: make line-in exclusive only on XonarClemens Ladisch
Move the line input switching code to the Virtuoso driver because only the Xonar cards bypass the analog mixer for line input. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: fix AK4396 double rate upper limitClemens Ladisch
Fix the upper sample rate limit for the double rate mode of the AK4396 to the value from the datasheet. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Add SPDIF controls as slave on AD codecsTakashi Iwai
The AD codecs have hardware SPDIF volume/switch controls but they are not assigned to the slave list for virtual master controls. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda: STAC92xx Line In/Mic as output checkMatthew Ranostay
This patch checks to see the Line In/Mic port have the ability to do output before creating the the control switches. The 92hd71bxx series of codecs has this issue with the port 0xe, which only allows input. Signed-off-by: Matthew Ranostay <mranostay@embededalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Add missing slave for AD1884 master switchTakashi Iwai
The Speaker switch is missing in the slave list. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Add model for Acer Aspire 5310Andy Shevchenko
Simplify usage of the Acer Aspire 5310 laptop with the ALC268 based codec sound card via add correct PCI SSID. Signed-off-by: Andy Shevchenko <andy@smile.org.ua> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Add Conexant 5051 codec supportTakashi Iwai
Added the support for Conexant 5051 audio codec. Right now there are two preset models, laptop and hp. The whole patch is based on the information from the base patch by Linuxant. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] add TempoTec HiFier driverClemens Ladisch
Add a driver for the MediaTek/TempoTec HiFier Fantasia sound card. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: more initializationClemens Ladisch
Initialize more registers of the controller and the second AC97 codec. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: make the number of analog output configurableClemens Ladisch
Add a field to struct oxygen_model to allow model drivers for cards with less than eight output channels. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] usb/caiaq: decrease period_bytes_minDaniel Mack
This patch decreases the snd_pcm_hardware->period_bytes_min field in the caiaq/usb audio driver. The hardware can actually handle as few as 128 bytes, depending on the system. So it makes no sense to keep applications from actually using such values. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] fm801 - Add mute support for FM-only card with FM801 PCI to tuner bridgeAndy Shevchenko
This is improvement of the early support of the FM-only cards where the fm801 chip represents the PCI to tuner bridge. The tuner initialization isn't included the mute on as well as mute support via V4L request. Proposed patch should fix this at least for 64-PCR model. Signed-off-by: Andy Shevchenko <andy@smile.org.ua> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Add model for Acer Aspire 5315Andy Shevchenko
Simplify usage of the Acer Aspire 5315 laptop with the ALC268 based codec sound card via add correct PCI SSID. Signed-off-by: Andy Shevchenko <andy@smile.org.ua> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda: STAC9205 GPIO line fixMatthew Ranostay
Fixed issue that the incorrect GPIO line was being pulled high for some STAC9205 based laptops. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Fix handling of multiple capture streamsTakashi Iwai
Fixed the bug that multiple capture streams conflict on Realtek codec routines. Also, this adds a framework to enable the alternative playback stream, e.g. for VoIP. It's not fully implemented yet, though. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda: Add dynamic mono mixer support for STAC92xx codecsMatthew Ranostay
Allows for dynamically creating mono out mixer controls and well as mono mux controls. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda: Added mono_out_pin to autoconfigMatthew Ranostay
Added a mono_out_pin field to autocfg struct, and code to parse for the mono_out_line. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: remove MIDI for generic cardsClemens Ladisch
None of the reference design models have MIDI, only the X-Meridian allows to connect a MIDI adapter. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: fix SPDIF input ratesClemens Ladisch
Fix up SPDIF input sample rates again: 32 kHz and 64 kHz are not supported. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] fix opti9xx/miro section mismatchRandy Dunlap
snd_opti93x_mixer() is only called by __devinit snd_opti93x_probe(), so the former can also be __devinit. snd_miro_mixer() is only called by __devinit snd_miro_probe(), so the former can also be __devinit. sound/isa/opti9xx/opti92x-ad1848.c: WARNING: vmlinux.o(.text+0xf91cd7): Section mismatch: reference to .init.data:snd_opti93x_controls (between 'snd_opti93x_mixer' and 'snd_card_opti9xx_free') WARNING: vmlinux.o(.text+0xf91d66): Section mismatch: reference to .init.data:snd_miro_controls (between 'snd_opti93x_mixer' and 'snd_card_opti9xx_free') opti9xx/miro.c: WARNING: vmlinux.o(.text+0xf926c2): Section mismatch: reference to .init.data:snd_miro_controls (between 'snd_miro_mixer' and 'snd_legacy_find_free_ioport') WARNING: vmlinux.o(.text+0xf926e5): Section mismatch: reference to .init.data:snd_miro_eq_controls (between 'snd_miro_mixer' and 'snd_legacy_find_free_ioport') WARNING: vmlinux.o(.text+0xf926f9): Section mismatch: reference to .init.data:snd_miro_line_control (between 'snd_miro_mixer' and 'snd_legacy_find_free_ioport') WARNING: vmlinux.o(.text+0xf92716): Section mismatch: reference to .init.data:snd_miro_amp_control (between 'snd_miro_mixer' and 'snd_legacy_find_free_ioport') WARNING: vmlinux.o(.text+0xf9273e): Section mismatch: reference to .init.data:snd_miro_preamp_control (between 'snd_miro_mixer' and 'snd_legacy_find_free_ioport') WARNING: vmlinux.o(.text+0xf92764): Section mismatch: reference to .init.data:snd_miro_capture_control (between 'snd_miro_mixer' and 'snd_legacy_find_free_ioport') WARNING: vmlinux.o(.text+0xf92783): Section mismatch: reference to .init.data:snd_miro_radio_control (between 'snd_miro_mixer' and 'snd_legacy_find_free_ioport') WARNING: vmlinux.o(.text+0xf9279a): Section mismatch: reference to .init.data:snd_miro_eq_controls (between 'snd_miro_mixer' and 'snd_legacy_find_free_ioport') WARNING: vmlinux.o(.text+0xf927b9): Section mismatch: reference to .init.data:snd_miro_radio_control (between 'snd_miro_mixer' and 'snd_legacy_find_free_ioport') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] fix cs5535 section mismatchRandy Dunlap
snd_cs5535audio_mixer() is only called by __devinit snd_cs5535audio_probe(), so the mixer function can also be __devinit. WARNING: vmlinux.o(.text+0xfdbba0): Section mismatch: reference to .init.data:ac97_quirks (between 'snd_cs5535audio_mixer' and 'process_bm0_irq') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Don't query widget parameter for invalid NIDTakashi Iwai
Don't query a widget parameter for an invalid NID in get_wcaps() but rather returns zero (i.e. no attribute). The read to an non-existing widget may result in a fatal codec communication error. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Optimize snd_hda_pser_pin_def_config()Takashi Iwai
Don't read the widget list again as we already have it at the beginning. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Add afg and mfg preset maskMarc Boucher
Added afg and mfg preset masks for more finer codec-preset selection. Signed-off-by: Marc Boucher <marc@linuxant.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-intel - Add ratelimit to timeout messagesMarc Boucher
Signed-off-by: Marc Boucher <marc@linuxant.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Add a delay after power state changeMarc Boucher
Added a delay after the power state change as a partial workaround for 'hda_intel: azx_get_response timeout' problem on Cxt codecs. Signed-off-by: Marc Boucher <marc@linuxant.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-27 17:32:59 +0000